Requirements to upgrade Ipad2

What are the requirements to upgrade to IOS5 ipad2. There are a lot of comments and failed upgrades that are reported. 
Please support all of this message.What are the requirements to upgrade to IOS5 ipad2.

open itunes, connect ipad.  it should tell you there is an update available.  If it doesn't, then click check for updates in the middle of the screen.

Similar Messages

  • Requirement to upgrade OBIEE 10g on Windows to OBIEE 11g on Linux

    Dear All,
    I have a requirement to upgrade OBIEE 10g from current windows 2003 environment to OBIEE 11g Linux environment.
    I went through forums and many threads on upgrade, everywhere they talk about Upgrade Assistant (UA). And oracle documentation says ,
    +"Do not change from one platform or architecture to a different platform or architecture as part of the upgrade process.+
    +For example, if the existing 10g system is running on a Windows 32-bit platform, do not install Oracle BI 11g on a Linux 64-bit platform and then run the Linux 64-bit Upgrade Assistant to upgrade the existing 10g system."+
    But there would certainly be scenarios with other users the way I have. Then what is the way out to do this upgrade?
    Can anyone give some advice on this. It is little urgent.
    Thanking in advance.
    Regards,
    Deepika.

    Thats are huge change in platform. win32 to linux 64.
    Yet what we upgrade is only
    catalog and rpd.
    this might involve some manual change if UA cannot complete successfully.
    Its better to do a prototype before the actual upgrade as recommended by Oracle. This will show what can the possible issues and road blocks.
    Edited by: user10615659 on May 23, 2013 11:22 AM
    Edited by: user10615659 on May 23, 2013 12:26 PM

  • I get a black and white logo and a progress bar after upgrade ipad2 5.01

    i get a black and white logo and a progress bar after upgrade ipad2 5.01

    See this page : http://support.apple.com/kb/HT4097 - it covers :
    iPad stops responding, showing the Apple logo with no progress bar or a stopped progress bar, for over ten minutes.

  • Requirements for upgradation from 4.7 to ECC 6.0

    Hi Guru's,
                      Can anybody explain what are the steps required for upgradation from 4.7 to ECC 6.0, technically and functionally. If any body have documents regarding the same, please share.Full marks will be awarded.thanx in advance....

    Hi
    You have to aware of all related program like BDC's , Screens related errors and all dictionary related problems.
    Some function modules may become obsolete, and some screens will change
    abnd some new fields will be added in the new versions etc.
    Also take care of SPAU and SPDD tcodes.
    You should be able to know about Unicode concept in sap.
    chk this
    http://www.thespot4sap.com/upgrade_guide_v2.pdf#search=%22upGRADE%20STEPS%20-%20SAP%22
    also chk these 2 notes in service.sap.com
    Technical Upgrade is only a version upgrade without any functionality changes.
    The objects that are needed to be upgraded are:
    Includes
    Function Groups / Function Modules
    Programs / Reports
    OSS Notes
    SAP Repository Objects
    SAP Data Dictionary Objects
    Domains, Data Elements
    Tables, Structures and Views
    Module Pools, Sub Routine pools
    BDC Programs
    Print Programs
    SAP Scripts, Screens
    User Exits
    You can refer to the below links for more information on technical upgrade:
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/07/upgradeFROMR3TOmySAPERP-PARTII&
    https://wiki.sdn.sap.com/wiki/display/profile/UPGRADEFROMR3TOmySAPERP-PARTIII
    http://help.sap.com/saphelp_nw2004s/helpdata/en/60/d6ba7bceda11d1953a0000e82de14a/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/2e/6d66647d9011d396b60000e82de14a/content.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5ac31178-0701-0010-469a-b4d7fa2721ca
    Reward points if useful
    Regards
    Anji

  • Required Post Upgrade Jobs: Missing jobs and failures

    Folks,
    In reviewing "Required Post Upgrade Jobs", I found that "Compile Non-Compiled Flexfields" failed. The job was submitted by APPSMGR and immediately started since the Request Process queues were not initially deactivated as reccomended in doc 399362.1. I'm afraid I don't know the password for APPSMGR. Is there a way for me to restart this job so that any successors release?
    Only a handful of the required jobs show to have been submitted and run. Would required jobs that have not run and do not appear in the queue need to be manually submitted?
    Thanks for any help.

    All of my post upgrade processes completed without error except the flexfield compile of AR_ADJUSTMENTS_ALL_DFV. It will not compile from within the forms either:
    Oracle error 911: ORA-00911: invalid character
    ORA-06512: at "SYSTEM.AD_DDL", line 165
    ORA-06512: at line 1 has been detected in afuddl() [3_xdd].
    do_ddl(APPLSYS, AR, 2, $statement$, AR_ADJUSTMENTS_ALL_DFV): private_do_ddl(APPS, APPLSYS, AR, 2, $statement$, AR_ADJUSTMENTS_ALL_DFV): do_cd_view(1, APPS, 2, AR_ADJUSTMENTS_ALL_DFV, $statement$): : do_apps_ddl(APPS, $statement$): : substr($statement$,1,255)='CREATE OR REPLACE VIEW AR_ADJUSTMENTS_ALL_DFV
    (ROW_ID, "CONTEXT_VALUE", AdjustmentStatus,
    CONCATENATED_SEGMENTS)
    AS SELECT ROWID, ATTRIBUTE_CATEGORY, ATTRIBUTE4,
    ATTRIBUTE4
    FROM AR_ADJUSTMENTS_ALL'
    View Name: AR_ADJUSTMENTS_ALL_DFV
    I am going to apply 5484000 Oracle E-Business Suite 12.0.2 Release Update Pack (RUP2) tonight and see if it makes any difference.

  • Steps required to upgrade to java 1.6.0_27.

    Can anyone please tell me or help me to as what are the steps required to upgrade to java 1.6.0_27 ??
    EBS R12.0.3

    Hi
    Helios
    You need windows one, please see upper metalink note which is mention by Hussein Sawwan already
    Step 1.2. Download the JRE Plug-in
    Step 2. Rename the JRE Plug-in and Place it on Web Application Tier So the files mentioned in the link [http://www.oracle.com/technetwork/java/javase/downloads/jre-6u27-download-440425.html]
    Linux x86 - RPM Installer     20.10 MB      jre-6u27-linux-i586-rpm.bin
    Linux x86 - Self Extracting Installer     20.63 MB      jre-6u27-linux-i586.bin
    Linux x64 - RPM Installer     19.67 MB      jre-6u27-linux-x64-rpm.bin
    Linux x64 - Self Extracting Installer     20.25 MB      jre-6u27-linux-x64.bin
    Solaris x86 - Self Extracting Binary     20.27 MB      jre-6u27-solaris-i586.sh
    Solaris SPARC - Self Extracting Binary     25.10 MB      jre-6u27-solaris-sparc.sh
    Solaris SPARC 64-bit - Self Extracting Binary     11.19 MB      jre-6u27-solaris-sparcv9.sh
    Solaris x64 - Self Extracting Binary     7.48 MB      jre-6u27-solaris-x64.sh
    These are used when I am accessing R12 application from linux/solaris platform... for accessing R12 with new JRE plugin on windows platform i need Windows x86 Offlin -> jre-6u27-windows-i586.exe
    Please correct me...all these are new to me, so silly questions pop up

  • How to upgrade ipad2 to ios7

    How to upgrade ipad2 to ios7

    Start with a backup of your device and then go to "Settings > General > Software Update" and update your device.

  • How to upgrade ipad2 to 4.3.3

    How to upgrade ipad2 to 4.3.3

    open itunes, connect ipad.  it should tell you there is an update available.  If it doesn't, then click check for updates in the middle of the screen.

  • How do you watch videos that require flash on ipad2

    how do you watch videos that require flash on ipad2

    As flash isn't supported on the iPad (http://www.apple.com/hotnews/thoughts-on-flash/), you could try apps such as Skyfire which claim to support flash, though their review are mixed. A number of websites (especially news sites) have their own apps in the App Store, so you could check to see if your favourite site(s) have apps.

  • Does PowerBook G4 meet minimum requirements to upgrade to OS X 10.5.8?

    My current OS is OS X 10.4.11 on PowerBook G4(1.67ghz). I try to use new iPhone 4 with my PowerBook G4 until I purchase new MacBook Pro. But the iPhone 4 is not working on my old OS. Where can I find information of the system requirement to upgrade to 10.5.8?
    Thanks in advance for help!

    Is the "Power PC G4 (867 MHz or faster) processor" included my PowerBook G4, too?
    Yes.
    (52971)

  • Security requirements to upgrade Master Data Services Database

    What is the security requirements to upgrade an MDS database. When I choose Upgrade Database and after running the upgrade scripts I get the following exception:
    Microsoft.MasterDataServices.Configuration.ConfigurationException: The user does not have access to the application. 

    Hi RicardoMarques182,
    Did the error happen right after the upgrade was done and was trying the open the Master Data Service(MDS) application? Could you please help to post the full(more detailed) error message?
    Just per the general error message, please ensure the currnt login user has the at least Explorer function permission:
    http://msdn.microsoft.com/en-us/library/ff487017.aspx
    Thanks,
    Jinchun Chen

  • Good evening, after upgrading Iphoto 9.5 a page opened requiring to upgrade my library. As it did not work out,for fear of losing all my pictures I  loaded Iphoto 9.4.3  with Time machine but I had lost quite a few photos. As a matter of fact, after searc

    Good evening,
    after upgrading Iphoto 9.5 a page opened requiring to upgrade my library. As it did not work out,for fear of losing all my pictures I  loaded Iphoto 9.4.3  with Time machine but I had lost quite a few photos. As a matter of fact, after searching , I found them In Photo library in 'images' on my hard drive. When I double click, 9.5 appears with all my pictures. Therefore, I would like to use 9.5 just by by clicking on the icon down my finder and  not by being obliged to open my hard drive.
    Would you please tell me what I should do. Thank you.
    Best regards,
    Robert

    Huh?
    As it did not work out,for fear of losing all my pictures I  loaded Iphoto 9.4.3  with Time machine but I had lost quite a few photos. As a matter of fact, after searching , I found them In Photo library in 'images' on my hard drive. When I double click, 9.5 appears with all my pictures.
    So, you have restored 9.4.3 from Time Machine but can see all your pictures in 9.5?
    Do you have two version of iPhoto on your Machine?
    And if you didn't update the Library, ("as it did not work out,") how can you see things in 9.5?
    So, whatever set up you have is confusing.

  • Can't find my downloaded movies after upgrade ipad2 iOS 5

    After aan easy upgrade to ios5.1.1 I can not find my downloaded movies after upgrade ipad2 iOS 5.

    You are looking in the videos app - correct?
    If they are not in there - try this ....
    Swipe to the right from your first home screen to get to the iPad Spotlight search. Type in the name of any of your movies in the field at the top. If a movie appears in the search - tap on it and it should hopefully start to play. Let it play for a minute or so - hit done - go back to videos app and see if all is OK and if the rest of your movies have appeared.
    If they still do not show up - sync them back from iTunes on your computer.

  • 2-year contract required to upgrade?

    Is a two-year contract required to upgrade your phone? If so, does this mean that if I buy an iPhone 4, I can't upgrade until the iPhone 6 comes out?

    When the 3GS was released last summer, AT&T offered an early upgrade price for those with a 3G who had not met their contract obligation for the subsidy AT&T paid Apple on their behalf for the 3G they purchased at AT&T's fully subsidized price 12 months or so before. AT&T still offers this now.
    AT&T's fully subsidized price for the 3GS is $199 for the 16GB & $299 for the 32GB. This price is for new AT&T subscribers and for existing AT&T subscribers that qualify for AT&T's upgrade or fully subsidized pricing with a new phone - any new phone including the iPhone.
    AT&T's early upgrade price for the 3GS is $399 for the 16GB & $499 for the 32GB. This price is for existing AT&T subscribers that haven't fulfilled their existing contract for a subsidized phone - for existing subscribers that don't qualify for AT&T's upgrade or fully subsidized pricing with any new phone.
    AT&T's full retail sales price the the 3GS is $599 for the 16GB & $699 for the 32GB.
    AT&T will probably do the same with the next generation iPhone and for the next one after that for those that must have the next generation iPhone when released.
    Before the iPhone, did you get a new phone every 12 months, or every 18 or 24 months?

  • Upgrade iPad2 to ios5 in Greece ?

    Is it possible yet to upgrade ipad2 to ios5 (in Greece) ?

    Yes it is.
    Just make sure your running the latest iTunes version, and plug your ipad in.

Maybe you are looking for

  • Clarification for Pro 8 EULA

    I'd like to receive some clarification on an issue I certainly feel deserves it. Please keep in mind any reference to "original media" need not be digital at all or in any way under the control of Adobe before being loaded or converted to PDF format.

  • ORA-06502 PL/SQL numeric or value error in wf process

    I am using Workflow 2.5 version, getting an error ORA-06502 on few functions, when I expedite and retry the process, error does not occur. Any help is greately appreciated. Thanks, Krishna.

  • Pictures from PDF not so sharp after OCR; can I disable autorotate ?

    In PDF's that needs to be auto rotated the pictures are not that sharp, they became a little blurry. Can I disabled auto rotate picture when doing OCR with Clearscan ? Acrobat X Thanks

  • User agreement is stuck in a never ending loop. cannot download apps, or songs. help.

    I am trying to download 1 song. I've tried both on my iphone and on my mac to no success on either. when i click to buy the song. it makes me agree to user agreement. i willingly do so and click the next button. the page loads and there is the same u

  • Oracle universal installer erro

    Hi Friends I'm trying to install Oracle 10g client database on my a windowsl os but while installing 10g i'm getting oracle universal installer error. error in writing to directory c:\document and settings\allusers\local settings\temp. can anyone ass