Requirements transfer to follow up materail, if the stock falls below

Hi All
The issue is related to the requirements transferring the follow up material,
when the inventory falls below the safety stock,
the requirements has to generated for the follow up material, in which is maintained in MRP 4
=================
Here in our case,
when the Inventory stock falls below the SAFETY STOCK,
the requirement are getting generated for the same material, but not for the follow up material( which is maintained in MRP4)
========================
What is the way out for transferring the requirements to follow up material (which is maintained in MRP4), in case of stock falls below the safety stock ?
Thanks & Regards
BRSR

requirement was already clear when you explianed in the first attempt.
i was trying to verify from you did you done anything on that or read any material for follow on mateial.
so follow on mateial has 2 stategies (please check in SAP help file as i didnt worked on this from long time)
1. to use the all existing stock of old and pass the requirement to other
2. on the perticular date ignore any requirement for old material and pass all requirement to new mateial.
there is not way to achive your expected results.
and i am not finding any business requirement that way....what is point of thinking "safety stock" when the material is going to replace by other material.
Please think on this.
Regards,
Pravin M.

Similar Messages

Inverntory transfer of an item that exceeds the stock

Dear Experts,
While doing inventory transfer for a particular item, i am able to enter the quantity greater than the stock and i am able to add it. Shall be more clear.. Consider an item "A" in a warehouse "WH1" with quantity 5. Now when i do an inventory transfer A from WH1 to another warehouse WH2, I am able to enter the number in the quantity column greater than 5. Is it possible to block the user from entering a value more than the stock value??
Kindly help
Regards
Shyam

Hi Shyam......
You can transfer or dispatch the goods more than stock you have in hand.
You have a setting at Administration --> System Initialization --> Document Settings --> There you find the Block Negative Inventory.
I guess its uncheck.......
Just Tick it your problem will be solved.......
Regards,
Rahul

Sales Order ATP should exclude the stock of a particular st. loc

Hi,
At Sale order creation, ATP check should exclude a particular Sto Location,
Suppose we have Sto Loc 001, 002, 003, 004 & 005, we want to reserve some stock for the next year, so we identify one storage location say 005 and move some stocks to this storage location. Now when the sales people are creating Sales order, the ATP check should exculde stocks from this Storage Location (the stocks in this sto loc should not be considered in ATP).
But for all other purpose like MRP this should be visible. We want the stock to be in unrestricted area in this Sto Loc.
Request you all to propose a feasible solution either through User exit or some configuration.
Thanks in advace,
Navin

Hi All,
Thanks a lot for all the replies, I found in the storage location table T001L, a field ``DISKZ`` settings called ``Storage location MRP indicator`` the details are as follows Storage location MRP indicator
that you use to exclude storage locations from material requirements planning at plant level.
If you do not set this indicator, stock, requirements, and receipts are included in MRP at plant level.
Use
You can exclude storage locations from MRP at plant level in one of two ways:
By excluding storage location stock from MRP
If storage location stock is excluded from MRP at plant level, no receipts for this storage location will be created in the planning run.
By planning storage location stock separately
If storage location stock is planned separately, the storage location is replenished with goods if the stock falls below the reorder point.
Has any one tried this and does this meets the requirement.
Thanks in advance,
Navin Shinde

Transistion in SAP to know The Stock For List Of Material

Dear Sir,
Is there any transistion in SAP.
To know the stock for list of material.
For Ex=
I want to know the stock for below material in one shot
1) A
2) B
3) C
4) D
Pls solve my problem soon
Thanks & Regards
Ajay Pareek

Hi Ajay,
Following are the some of Useful T.Codes for the stock Report.
LT51 Maintain Preallocated Stock
LVASE Exit stock from Work Center
LX02 Stock list
LX23 Stock comparison IM - WM
LX27 Stock levels by shelf life exp.date
MB52 List of Warehouse Stocks on Hand
MB53 Display Plant Stock Availability
MB54 Consignment Stocks
MB5B Stocks for Posting Date
MB5K Stock Consistency Check
MB5L List of Stock Values: Balances
MB5OA Display Valuated GR Blocked Stock
MB5T Stock in transit CC
MB5TD Stock in Transit on Key Date
MB5W List of Stock Values
MBBS Display valuated special stock
MBLB Stocks at Subcontractor
MBSF Release Blocked Stock via Mat. Doc.
MBW1 Special stocks via WWW
MC.1 INVCO: Plant Anal. Selection: Stock
MC.5 INVCO: SLoc Anal. Selection, Stock
MC.9 INVCO: Material Anal.Selection,Stock
MC.D INVCO: MRP Cntrllr.Anal.Sel. Stock
MC.H INVCO: Business Area Anal.Sel. Stock
MC.L INVCO: Mat.Group Analysis Sel. Stock
MC.P INVCO: Division Analysis Sel. Stock
MC.T INVCO: Mat.Type Anal.Selection Stock
MC48 INVCO: Anal. of Current Stock Values
MC49 INVCO: Mean Stock Values
MC50 INVCO: Analysis of Dead Stock
MC8M Read Opening Stocks
MCB) INVCO: Long-Term Stock Selection
MCC4 Set Up INVCO Info Structs.from Stock
MCH: RIS: STRPS/Mvmts + Stock - Selection
MCKJ Selection version tree: Stock
MCKR User-spec. sel. vers. tree: Stock
MCNB BW: Initialize Stock Balances
MCSK Call Standard Analyses of Stocks
MD04 Display Stock/Requirements Situation
ME27 Create Stock Transport Order
ME2O SC Stock Monitoring (Vendor)
MF65 Stock Transfer for Reservation
MI35 Batch Input: Post Zero Stock Balance
MILL_ Cutting Stock Transfer
MIQ1 Batch Input: PhInvDoc. Project Stock
MM73 Special Stocks: Preparation
MM74 Archive Special Stocks
MM75 Display Archive of Special Stocks
MMBE Stock Overview
MMBE_ Stock Overview
MMCL Stock Overview by Characteristic
Or you can refer the thread [stock overview;, search there are several threads already available regarding this.
Regards,
Shyamal

The stock in transit field is not visible in MD04

Hi Team
Stock in transit visible on MD04
STPO 28801084 is internal stock transfer from FI25 to FI28.
Qty of PO is visible in the ´stock in transit´ field on SAO transaction MD04 under plant FI28
when corresponding delivery 1202400481 have been PGId at FI25 (2014/07/07)
Stock in transit NOT visible on MD04
STPO 28502250 is internal stock transfer from FI31 to FI28.
The ´stock in transit´ Qty of PO is not visible on MD04 under plant FI28.
even if the corresponding   delivery 1202323564 have been PGId at FI31 (2014/06/23)
Br, Kiran Unde

Hello
Please take a look on question 9 of the following FAQ note, which explains the standard system behavior:
549752 - FAQ: MRP elements in transaction MD04/MD05
9. Question: Why does the system not display stock in transit for stock
    transport orders with order confirmation (notified orders)?
    Answer:
    Purchase order confirmations do not have to match the original
    purchase order delivery schedule lines. Moreover, the purchase order
    confirmation (view MDLA in materials planning) does not contain the
    same information as the purchase order to determine the stock in
    transit. The display of the stock in transit is therefore not
    implemented for the purchase order confirmation in the materials
    planning evaluation transactions.
BR
Caetano

Moving the stock from quality to unrestricted.

Hello Experts,
This is regarding QM issue.
in inspection lot certain lot quantity is entered in quality and it is not cleared.
the system status for that lot in QA03 is UD ICCO PRII STUP
now the question is how to clear this one.
even i checked for inconsistency,but there is no inconsistency exits.
kindly tell me how to proceed further and solve this issue.
Regards,
santosh.

Hi Santosh, Yes no problem. You can post.
You have now identified the correct lot.
Select this lot and click on execute button. Then go to stock posting tab and post the remaining quantity to unrestricted use.
Itu2019s absolutely correct to post the stock against this lot.
In fact we can say earlier selected lot was incorrect as it was not having status ending with SPRQ or SPST. I explain this to you.
For material XYZ, 5 inspection lots are created containing 20 Qyt each (say lot numbers are 1,2,3,4 and 5). When you look at MMBE, you will see that quantity 100 is lying in quality inspection which is the sum of all lots quantities.
Now one by one you go on posting stock to unrestricted and giving UD. Accidently you gave UD for lot number 3 without posting the stock. Now system will show 20 Qty in quality inspection in MMBE. Here the first task to identify the correct lot against which we did not carry out stock posting. In order to identify this correct lot number against which stock posting was not done, we execute QVM2 transaction. Here lot number 3 has status SPRQ i.e. stock posting required. If you try to post the stock against lot other than 3, system will definitely throw error because it was already posted.
Hence the output of QVM2 always gives the correct lot against which stock posting is not done.
Regards,
Anand Rao

Want to see the stock of different variants with same configurable material

I have the stock for configurable material with different variants. Now I can see the cumulative stock
for that configurable material. But my requirement is that I want to see the stock for every variant
belonging to the configurable material.
How can I get it?

hello anant,
In my opinion for sure standard sap report cannot display the stock for a individual configuration.(Variant)
Reason:characteristics display/hide function is very dynamic dependeding on the dependency and interdependency.
The only option is by a report CL30N plus abap. Since we cannot keep anything in stock for a configurable material. You need to identify all open sales order and stock position OR through material movements and then find the produciton order and then read all char. values.
I assume you are not taking about variant materials.
Reg
Samson.

Everytime I connect my iPod to USB, iTunes says the following: This iPod cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes.

I have the latest 64-bit version of iTunes on Windows 7 Ultimate. Everything was fine until recently. Now when I connect my iPod Touch to the USB to sync with iTunes, I get the following message: "This iPod cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes" I have removed, repaired, and installed the 64-bit version numerous times as well as disabled all antivirus / adware utilities. Same message appears when I plug in my iPod. Any help would be greatly appreciated.

Did you try removing and reinstalling all the Apple software using these instructions:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

When I have made a movie in Imovie and I want to transfer it to Theater I get the following comments: Imovie is updating your Theater, You can't add or remove movies right now. Please try again in a moment. I have reinstalled, Imovie to no avail

when I have made a movie in Imovie and I want to transfer it to Theater I get the following comments: "Imovie is updating your Theater, You can't add or remove movies right now. Please try again in a moment". I have uninstalled and reinstalled Imovie to no avail, cleaned with "Onyx" etc.

This simply means it is set to Automatically update and you should not have to do anything with it.
When you put new music in iTunes , it will automatically go on the iPod next time you connect it.
This is the default to make it very simple and very easy to use.
If you want to do it all yourself, iTunes prefs -> iPod.
Set to Manually manage songs and playlists.
You have to drag songs to the iPod and delete them from the iPod.

Require Client Certificate to Access ASDM on the Following Interfaces

Hello
I have an ASA 5585 with an outside interface with two subnets. The mgmt interface is the secondary interface. I have a certificate linked to the outside interface's primary ip address. When I ASDM to the ASA I get a dialog box telling me the cert is self signed. Do I need to get a second cert or can I do something else on the ASA that will allow the existing cert on the ASA to work with ASDM on the ASA?
I.e. Configuration/Management Access/ASDM/HTTPS/Telent/SSH/Require Client Certificate to Access ASDM on the Following Interfaces
Thanks!
Matt

You can bind the identity certificate to multiple interfaces. Whether it is self-signed or from a third party trusted root CA it will work either way.
You may get some warnings from ASA if the FQDN or IP address you are connecting to does not match the certificate but clicking through that will allow you to manage the appliance.
Client certificates are a totally separate issue. That's typically only used when you have a PKI and are using the certificates issued to a client as a form of authentication and/or authorization.

Requirement Of FG in one plant triggers the MRP or requirement in another plant

Hi Experts,
My requirement is as follows,
There are 2 Plants, One is Warehouse depot and another one is Manufacturing Plant located at two different physical locations.
Warehouse is also defined as Plant only. Customer will give the requirement of FG to warehouse but not to manufacturing Plant.
Now, when Warehouse will transfer this requirement to manufacturing plant, it should trigger the requirement in it and BOM explosion and raw material requirement for that FG will be created accordingly.
How can I achieve this and what configuration i need to do for this?
Note: FG Material code is same in both Plants.

Hi Shripad,
You can utilize the special procurement key '40' or '80' in MRP 2 tab of the material in your Warehouse. Refer to this page for a more detailed explanation: Planning and Production Alternate Plant.
According to the term used in that process, your Warehouse will be the 'Planning Plant' and your manufacturing plant will be the 'Production Plant'. Requirement from the 'Planning Plant' will trigger requirement in 'Production Plant'. If you're using '40', after GR from production, you will need to 'ship' the stock to your 'Planning Plant', while if you're using '80', GR from production will update your stock in 'Planning Plant' directly.
Regards,
Julian

I am trying to use motion tracking to have text follow a section of the background.The text box follows the motion path, but the text just sits there. What am I doing wrong?

I am trying to use motion tracking to have text follow a section of the background.The text box follows the motion path, but the text just sits there. What am I doing wrong?

Motion basically looks at the the source footage and it's timing (in the timing section of the Inspector) when analyzing for tracking. Filters are basically ignored by the tracker. Retiming actions, like time re-mapping, or retiming behaviors that are applied before the tracker should be used by the tracker. Did you change the timing after doing the tracking? If so this would also require you to re-track the shot. Understanding that you found a workaround, describing the effects you applied would help to explain why you ran into problems.
Cheers!

Mapping the Follow-up action to the Usage-Decision

Hi All,
I have a the following requirement in my development:
The Usage decision needs three function-modules for the three cases of the follow-up process.
In addition to that this ,service shall have a control table in Customizing, where the customer is able to decide which follow-up action should be made. (not standard customzing). The function-module for this process is not standard.
1) Does the second requirement also require FM?
2) Please give me the steps to map the Follow-up action to the Usage-Decision in SPRO
Thanks,
Vasuki

Hi
First create the follow up action which you want, and assign the same in QS51 t.code to your UD code group.
Thanks
S.Murali

This ipod cannot be used because the required software is not installed. Run the Itunes installer to remove Itunes, then install the 64-bit version of Itunes.

I'm not sure if the error message is related but smart friend was using my computer started deleting Quicktime & Safari and told me that they shouldn't be on my computer as they are not windows product & I can't use them on my laptop. With trepidation but acknowledging I don't know any of the stuff they were talking about, I allowed them to raid my laptop thinking it could be for the best. Now I'm not sure if it is related or not but depsite me having the most recent Itunes updates on both my Ipod 4TH GT, I am getting the following message everytime I connect my Ipod to the computer...and the timing would be about right too:
this ipod cannot be used because the required software is not installed. Run the Itunes installer to remove Itunes, then install the 64-bit version of Itunes.
If it helps I am running the 10.7.0.21 on the Sony Vaio & remember checking last week I do have the latest update on the Ipod but it is a different version from the Itunes on the laptop (which may be normal, I wouldn't know) but as I am away from home & Wifi I can't tell u the version on that though.
My problem is I cannot find an apple installer on the laptop to uninstall & I have searched Apple & Google for help and have seen others posts with the same issue but alot of the answers unfortunately I can't follow. I would greatly appreciate it if you can you answer any of these questions for me?
*Will add & remove totally uninstall Itunes so that I can reinstall?
*Will I lose my apps, music & data?
*If the apps, music & data is recoverable, how do I do that?
Sadly I can't find the installer & would love to add my new Mumford & Sons cd to my Ipod collection but don't know how to fix this. I love my Ipod & google but I have spent hours tryign updates, downloads, searches & feedback to Apple. A few months ago I had an Itunes billing problem & there was a webpage where you could email an apple support worker & rhe replied to my credit card problem within a day or 2 but I can't find that help for this problem..I couldn't express my graditude enough if you could help me with this, but thank you.

dorygirl2009 wrote:
I'm not sure if the error message is related but smart friend was using my computer started deleting Quicktime & Safari and told me that they shouldn't be on my computer as they are not windows product & I can't use them on my laptop.
This "smart friend" really sounds like a collosal moron.
Follow the instructions here: http://support.apple.com/kb/HT1925 to remove and reinstall all Apple products on your computer.
Once you get everything working, the next time your "smart friend" wants to touch your computer, tell them firmly NOT A CHANCE IN ****!
None of your data (media, podcasts, apps) will be affected by removing and reinstalling iTunes.

This iphone can not be used because the required software is not installed. Run the itunes installer to remove itunes, then install the 64bit version of itunes

This iphone can not be used because the required software is not installed. Run the itunes installer to remove itunes, then install the 64bit version of itunes
I keep getting the above error everytime I plug in my iphone.
I am not daft, I do have the 64bit version of iTunes installed already. When I installed itunes 10.5 and more recently 10.5.1 I got an error message that rolls back a section of the installation (The updater I think) before finishing off installing iTunes.
After the installation iTunes will work normally apart from when I try to connect a device. At which point I get the title error message and I can not sync my phone.
It's probably down to Itunes not installing properly however no matter what I try I can not sort the problem out. I've tried uninstalling all apple programmes followed by a registry clean, then reinstall. I've tried the same again but in a specific order. I've tried repairing iTunes, repairing the updater etc etc. Nothing seems to work. I'm out of ideas.
Has anybody had this problem? Please can somebody tell me how to fix it!
Getting an iPad this Christmas and if I can't sync that up to my PC I may just have to go over to ANDROID!!!

Is there a way to install this on its own?
Yeah, let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunes64Setup.exe installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunes64Setup.exe, and select "Extract to iTunes64Setup". WinRAR will expand the contents of the file into a folder called "iTunes64Setup".
Go into the folder and doubleclick the AppleMobileDeviceSupport64.msi to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport64.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, does an iTunes install go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

Requirements transfer to follow up materail, if the stock falls below

Similar Messages

Maybe you are looking for