Requires Oracle client for windows server 2008 Version 6.1

Hello
I am using Windows 2008 Server Version 6.1 (64 Bit). I want to install Oracle client on this server. Which version is suitable for my requirement and from where i can download it.
Thanks
Sijo Thomas

user12248518 wrote:
I am in the same boat, I have downloaded what was told to download and it doesn't install it keeps saying "Unknown" 3 times in a popup when I try to install.Oracle has roughly 3,000 products. You downloaded 'what you were told' - one of those 3,000 products. And it didn't work.
The amount of information you provide is surprisingly sparse, assuming you want assistance.
So - if you want help, you might wnat to provide some information:
- the operating system (including edition, and major service pack if WIndows, or distro && major/minor release and kernel if *nix)
- the URL froim which you downloaded
- the country yuo are in (since ORacle could redirect to several sitres based on region)
- the command or executable, including directory path, you run or double-click on
- the 'exact' error message, or if a generic one like "Unknown", perhaps a screen shot to convince us that it is actually such a generic message
It's just a suggestion, but answering in such detail actually tells us you are serious about resolving the issue - you put in effort, and that may convince us to return some effort.

Similar Messages

Oracle 11g Client for Windows Server 2008 Relase2 Operating Stystem

Hi,
I am having a server with Operating System as Windows Server 2008 R2 version 64 - bit.
I am using SSRS 2008 which is 64 bit, for retreiving the data from Oracle (which is 11g - 32 bit), I am unable to create data source for Oracle.
I had installed ODAC Components of Oracle 11.1.0.7.20 on the server, but still I am getting the following error:
"The 'OraOLEDB.Oracle.1' provider is not registered on the local machine."
Does any one know how to install Oracle Client 11g on Windows Server 2008 R2 Operating system?

Helios,
It is wonderful that you are polite and encouraging to new people.
While you are responding, could you explicitly direct people to use the correct forum. This has at least 2 benefits:
1) Ensures that the person gets the widest possible amount of assistance;
2) Ensures that the rest of us do not need to waste time on improperly placed questions.
I suggest 'explicitly' since some people do not get the hint, and keep returning to the original thread.
This thread belongs in 'Database - General' or 'Database - Install'.

Oracle XE for windows server 2008 64 bit

I have windows server 2008 64 bit
I want to install a express edition on it
but does't getting source link to download
any one knows pls tell me

Hi Nine;
Please see:
http://www.oracle.com/technetwork/database/express-edition/downloads/index.html
Also see:
XE on MS Windows Server 2008?
Regard
Helios

ODAC vs oracle client on Windows server 2008

Hello,
Apologies in advanced if this is a silly question.
I am currently working with a .NET application team that connects to oracle. I am attempting to host there application on my servers. I have tested connectivity to there DB with SQLplus using the 11.2 oracle client.
The application team is asking me to install Oracle Developer tools on the server to replace the client. One of the members of the operate team told me that this is a requirement for there application to talk to oracle. I don't necessarily think they are correct, are there any oracle dependence that would require to ODT to be installed to run a .net application on a server? It's my understanding that ODT is primary used as a plug in for VS.
Thanks in advance,
Dax

873574 wrote:
Hello,
Apologies in advanced if this is a silly question.
I am currently working with a .NET application team that connects to oracle. I am attempting to host there application on my servers. I have tested connectivity to there DB with SQLplus using the 11.2 oracle client.
The application team is asking me to install Oracle Developer tools on the server to replace the client. One of the members of the operate team told me that this is a requirement for there application to talk to oracle. I don't necessarily think they are correct, are there any oracle dependence that would require to ODT to be installed to run a .net application on a server? It's my understanding that ODT is primary used as a plug in for VS.
Thanks in advance,
DaxDax,
You are correct that you do not need the Oracle Developer Tools for Visual Studio to be installed on the server. What the team is probably meaning to ask is for you to install "Oracle Data Provider for .NET" which is also part of the ODAC install. They probably got the two names mixed up.

Error on clone database, oracle 10g release 2 for windows server 2008

Hi,
OS: Windows Server 2008 X64
Oracle: oracle 10g release r2 for windows server 2008
An error occurred when creating a database, stop at last step, Screenshot:
[http://temp.wsria.com/oracle_create_db.png|http://temp.wsria.com/oracle_create_db.png]
the trace log content:
[main] [9:56:35:982] [CommandLineArguments.process:563] CommandLineArguments->process: number of arguments = 32
[main] [9:56:35:982] [CommandLineArguments.process:738] CommandLineArguments->process: Create Database argument is specified
[main] [9:56:35:982] [CommandLineArguments.process:910] CommandLineArguments->process: template Name argument is specified
[main] [9:56:35:982] [CommandLineArguments.process:960] CommandLineArguments->process: db name argument is specified
[main] [9:56:35:982] [CommandLineArguments.process:3074] CommandLineArguments->process: in Operation Type is Creation/GenerateScripts Mode condition
[main] [9:56:35:997] [CommandLineArguments.process:3298] CommandLineArguments->process: Successfully process command line arguments
[main] [9:56:36:668] [Host.checkOPS:2055] Inside checkOPS
[main] [9:56:36:668] [Host.checkOPS:2067] Trying to check cluster existence
[main] [9:56:36:715] [Library.getInstance:97] Created instance of Library.
[main] [9:56:36:715] [Library.load:197] Loading orauts.dll...
[main] [9:56:36:715] [Library.load:203] oracleHome D:\oracle\product\10.2.0\db_1
[main] [9:56:36:715] [sPlatform.isHybrid:63] osName=Windows Vista osArch=amd64 rc=false
[main] [9:56:36:715] [Library.load:223] Loading library D:\oracle\product\10.2.0\db_1\bin\orauts.dll
[main] [9:56:36:715] [Library.load:247] Loaded library D:\oracle\product\10.2.0\db_1\bin\orauts.dll from path=
D:\oracle\product\10.2.0\db_1\bin
[main] [9:56:36:715] [Library.load:197] Loading MSVCRT.dll...
[main] [9:56:36:715] [Library.load:203] oracleHome D:\oracle\product\10.2.0\db_1
[main] [9:56:36:715] [sPlatform.isHybrid:63] osName=Windows Vista osArch=amd64 rc=false
[main] [9:56:36:715] [Library.load:223] Loading library D:\oracle\product\10.2.0\db_1\bin\MSVCRT.dll
[main] [9:56:36:731] [Library.load:247] Loaded library D:\oracle\product\10.2.0\db_1\bin\MSVCRT.dll from path=
D:\oracle\product\10.2.0\db_1\bin
[main] [9:56:36:731] [Library.load:197] Loading orawsec10.dll...
[main] [9:56:36:731] [Library.load:203] oracleHome D:\oracle\product\10.2.0\db_1
[main] [9:56:36:731] [sPlatform.isHybrid:63] osName=Windows Vista osArch=amd64 rc=false
[main] [9:56:36:731] [Library.load:223] Loading library D:\oracle\product\10.2.0\db_1\bin\orawsec10.dll
[main] [9:56:36:731] [Library.load:247] Loaded library D:\oracle\product\10.2.0\db_1\bin\orawsec10.dll from path=
D:\oracle\product\10.2.0\db_1\bin
[main] [9:56:36:731] [Library.load:197] Loading orasrvm10.dll...
[main] [9:56:36:731] [Library.load:203] oracleHome D:\oracle\product\10.2.0\db_1
[main] [9:56:36:731] [sPlatform.isHybrid:63] osName=Windows Vista osArch=amd64 rc=false
[main] [9:56:36:731] [Library.load:223] Loading library D:\oracle\product\10.2.0\db_1\bin\orasrvm10.dll
[main] [9:56:36:731] [Library.load:247] Loaded library D:\oracle\product\10.2.0\db_1\bin\orasrvm10.dll from path=
D:\oracle\product\10.2.0\db_1\bin
[main] [9:56:36:731] [Version.isPre10i:189] isPre10i.java: Returning FALSE
[main] [9:56:36:731] [WindowsSystem.regKeyExists:1006] WindowsSystem.regKeyExists: mainkey= HKEY_LOCAL_MACHINE subkey = Software\Oracle\Ocr
[main] [9:56:36:746] [WindowsSystem.getCSSConfigType:1163] configType=null
[main] [9:56:36:746] [Host.checkOPS:2073] cluster existence:false
[main] [9:56:36:746] [Host.checkOPS:2111] Cluster installed=false
[main] [9:56:36:902] [InitParamHandler.endElement:506] CustomSGA flag: false
[main] [9:56:36:902] [InitParamHandler.endElement:507] Database Type: MULTIPURPOSE
[main] [9:56:36:918] [InitParamHandler.endElement:508] Mem Percentage: 40
[main] [9:56:36:918] [InitParamHandler.endElement:526] distributing Memory: 13737443328
[main] [9:56:36:918] [MemoryCalculator.calculateMemory:122] Setting SGA to MAX_SGA 1610612736
[main] [9:56:36:918] [StorageAttributes.setAttribute:232] IN threadID:1 group#=1
[main] [9:56:36:918] [StorageAttributes.setAttribute:232] IN threadID:1 group#=2
[main] [9:56:36:918] [StorageAttributes.setAttribute:241] Current threadID=1
[main] [9:56:36:918] [StorageAttributes.setAttribute:248] Current threadID=1 ==> redoGroups[0]=1
[main] [9:56:36:918] [StorageAttributes.setAttribute:258] vRedoGroups:[1]
[main] [9:56:36:918] [StorageAttributes.setAttribute:288] setAttribute: bExists=false
[main] [9:56:36:918] [StorageAttributes.setAttribute:232] IN threadID:1 group#=3
[main] [9:56:36:918] [StorageAttributes.setAttribute:241] Current threadID=1
[main] [9:56:36:918] [StorageAttributes.setAttribute:248] Current threadID=1 ==> redoGroups[0]=1
[main] [9:56:36:918] [StorageAttributes.setAttribute:248] Current threadID=1 ==> redoGroups[1]=2
[main] [9:56:36:918] [StorageAttributes.setAttribute:258] vRedoGroups:[1, 2]
[main] [9:56:36:933] [StorageAttributes.setAttribute:288] setAttribute: bExists=false
[main] [9:56:36:933] [TemplateManager.parseCloneTemplate:1477] See for any transportable datafiles in TemplateManager.....
[main] [9:56:36:933] [TemplateManager.isInstallTemplate:2178] Selected Template by user:=General Purpose
[main] [9:56:36:933] [TemplateManager.isInstallTemplate:2185] The Message Id to be searched:=GENERAL_PURPOSE
[main] [9:56:36:933] [TemplateManager.parseCloneTemplate:1489] create new clone data file for tp file.......
[main] [9:56:36:933] [Host.setupOIDCommandlineParameters:7184] setupOIDCommandlineParameters:
[main] [9:56:36:933] [Host.setupOIDCommandlineParameters:7185] m_regWithdirService: false
[main] [9:56:36:933] [Host.setupOIDCommandlineParameters:7186] m_unregWithdirService: false
[main] [9:56:36:933] [Host.setupOIDCommandlineParameters:7187] m_updateDirService: false
[main] [9:56:36:933] [Verifier.processRawConfigFile:3523] StorageType == 0
[main] [9:56:36:933] [Verifier.setOradataDest:4349] setOradataDest:dfDest=D:\oracle\product\10.2.0\oradata
[main] [9:56:36:933] [TemplateManager.updateDatafileDestination:1957] updateDatafiles:datafileDir=D:\oracle\product\10.2.0\oradata
[main] [9:56:36:933] [TemplateManager.updateDatafileDestination:2103] From template, RedoLogGrName=1
[main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2118] new file name redo01.log
[main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2103] From template, RedoLogGrName=2
[main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2118] new file name redo02.log
[main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2103] From template, RedoLogGrName=3
[main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2118] new file name redo03.log
[main] [9:56:36:965] [ProgressOnlyHost.performOperation:162] processRawConfigFile=false
[main] [9:56:36:965] [Verifier.validateTemplate:1629] StorageType == 0
[main] [9:56:36:965] [ProgressOnlyHost.performOperation:178] validateTemplate=true
[main] [9:56:36:965] [OracleHome.isRacEnabled:149] bRacOn = false
[main] [9:56:36:980] [Verifier.validateTemplate:1629] StorageType == 0
[main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
[main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
[main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
[main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
[main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
[main] [9:56:36:980] [Verifier.calculateRedoLogGroupFileSizes:3083] canonicalPath=D:\oracle\product\10.2.0\
[main] [9:56:36:980] [Verifier.calculateRedoLogGroupFileSizes:3083] canonicalPath=D:\oracle\product\10.2.0\
[main] [9:56:36:980] [Verifier.calculateRedoLogGroupFileSizes:3083] canonicalPath=D:\oracle\product\10.2.0\
[main] [9:56:36:980] [Verifier.getControlfFileSizes:3001] No. of Control files:=3
[main] [9:56:37:105] [Host.executeSteps:4044] Executing steps....
[main] [9:56:37:105] [Host.setUpForOperation:2920] setUpForOperation: Mode = 128
[main] [9:56:37:121] [Host.executeSteps:4186] setupForOperation returned: true
[main] [9:56:37:121] [Host.createStepSQLInterface:5948] sid =ora10g
[main] [9:56:37:136] [SQLEngine.initialize:242] Execing SQLPLUS/SVRMGR process...
[main] [9:56:37:136] [SQLEngine.initialize:270] m_bReaderStarted: false
[main] [9:56:37:136] [SQLEngine.initialize:274] Starting Reader Thread...
[Thread-4] [9:56:37:355] [StepContext$ModeRunner.run:2478] ---- Progress Needed:=true
[Thread-4] [9:56:37:464] [BasicStep.execute:202] Executing Step : CLONE_DB_CREATION_RMAN_RESTORE
[Thread-4] [9:56:37:464] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01092
[Thread-4] [9:56:37:464] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01034
[Thread-4] [9:56:37:464] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-03114
[Thread-4] [9:56:37:464] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-12560
[Thread-4] [9:56:37:464] [StepErrorHandler.setIgnorableErrors:250] setting Ignorable Error: ORA-01109
[Thread-4] [9:56:37:464] [BasicStep.configureSettings:304] messageHandler being set=null
[Thread-4] [9:56:37:464] [BasicStep.execute:202] Executing Step : INSTANCE_CREATION
[Thread-4] [9:56:37:464] [BasicStep.configureSettings:304] messageHandler being set=null
[Thread-4] [9:56:37:479] [InitParamAttributes.sortParams:3532] m_sortOn:-1 sortOn:4
[Thread-4] [9:56:37:620] [OracleHome.isRacEnabled:149] bRacOn = false
[Thread-4] [9:56:37:667] [Host.noEntryinOratab:5115] Check made for oratab arg passed............
[Thread-4] [9:56:37:667] [Oradim.getAddEntryCommand:353] AddEntry=[D:\oracle\product\10.2.0\db_1\bin\oradim.exe, -new, -sid, ORA10G, -startmode, manual, -spfile]
[Thread-4] [9:56:38:899] [Oradim.getEditEntryCommand:422] getEditEntry cmd=[D:\oracle\product\10.2.0\db_1\bin\oradim.exe, -edit, -sid, ORA10G, -startmode, auto, -srvcstart, system]
[Thread-4] [9:56:39:55] [Oradim.addSidToRegistry:871] oracleHomeKey: SOFTWARE\ORACLE\KEY_OraDb10g_home1
[Thread-4] [9:56:39:117] [BasicStep.configureSettings:304] messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@c73f0d8
[Thread-4] [9:56:39:117] [CloneRmanRestoreStep.executeImpl:217] Instance Creation went fine..........
[Thread-4] [9:56:39:117] [CloneRmanRestoreStep.executeImpl:224] db_recovery_file_dest=D:\oracle\product\10.2.0\flash_recovery_area
[Thread-4] [9:56:39:117] [CloneRmanRestoreStep.executeImpl:227] db_recovery_file_dest_size=2147483648
[Thread-4] [9:56:39:991] [SQLEngine.setSpool:1750] old Spool = null
[Thread-4] [9:56:39:991] [SQLEngine.setSpool:1751] Setting Spool = D:\oracle\product\10.2.0\db_1\cfgtoollogs\dbca\ora10g\CloneRmanRestore.log
[Thread-4] [9:56:39:991] [SQLEngine.setSpool:1752] Is spool appendable? --> true
[Thread-4] [9:56:39:991] [CloneRmanRestoreStep.executeImpl:320] starting with pfile=D:\oracle\product\10.2.0\admin\ora10g\pfile\init.ora

Check your SQLNET.AUTHENTICATION_SERVICES settings in sqlnet.ora file.
ORA-28547 : Connection to server failed, probable Net8 admin error
thanks
http://swervedba.wordpress.com/

Required weblogic 10.3.5 instllable for windows server 2008(64bit)

Hi,
I have been trying to find the weblogic server(10.3.5), CO(13.4), BO(13.4) and POS(13.4) installable for Windows server 2008(64bit) but am unable to find them in e-delivery or anywhere else on Oracle website.
Can anyone please provide me the link for these software downloads.
Thanks.

Hi
On this below link, look for older versions of Weblogic Server which is at the bottom of the page. Expand for WLS 10.3.5. You need Weblogic Server + Coherence package installer. Download the generic jar installer.
http://www.oracle.com/technetwork/middleware/weblogic/downloads/wls-main-097127.html
See this below post for more details:
Re: Why So Difficult To Find WebLogic Server 10.xx for Windows 7 64-bit??
Thanks
Ravi Jegga

Oracle Forms and Reports 10gR2 for Windows Server 2008 (64bit)

Hi!
I need to install Oracle Forms and Reports 10gR2 in a windows server 2008 64 bit machine. But I cannot find the installer of it. Is there a way to do it?
Thanks...

I need to install Oracle Forms and Reports 10gR2 in a windows server 2008 64 bit machine.Be aware that Oracle Forms and Reports 10gR2 (AS 10.1.2.0.2) is not certified for windows server 2008, as from Oracle Certification Matrices

Upgrade Oracle 11.1.0.6.0 x64 to Oracle 11.1.0.7.0 for Windows Server 2008

Hi,
I am a little confused because I have Windows Server 2008 64 bit operating system and had installed Oracle 11g 11.1.0.6.0 (x64) prior to the Oracle 11g 11.1.0.7.0 for Windows Server 2008 install package becoming available.
My database needs no backup of data as it is a fresh installation so its removal is not a problem.
To now upgrade to Oracle 11g 11.1.0.7.0 for Windows Server 2008 do I need to
a) Uninstall Oracle 11.1.0.6.0 (x64) and then install Oracle 11.1.0.7.0 on Windows Server 2008
or
b) Apply patch 6890831 (will this upgrade from 11.1.0.6.0 x64 to 11.1.0.7.0 for Windows Server 2008?)
Any help much appreciated as having looked at documentation I am still confused what I need to do.
Thanks.

Duplicate post
Upgrade Oracle 11.1.0.6.0 x64 to Oracle 11.1.0.7.0 for Windows Server 2008
Please continue with other thread.

How to download oracle patch set 10.2.0.5 for Windows server 2008 R2

I need download and install oracle patch set 10.2.0.5 and install for Windows server 2008 R2 (notes 1486772).
But I get message "Download basket request for update has been processed. Unable to add 1 new object(s). The objects are already part of Export and to be processed."
Help me, please!

Hi,
Have you looked at this location https://service.sap.com/oracle-download ?
Refer SAP Note 871735 - Current patch set for Oracle 10.2.0 -> Oracle patch set 10.2.0.5
Once you add the Patchset 10.2.0.5 in download basket, you will find the same in Export tab of Download Basket. You will have to get the approval from SAP Export department by raising OSS message with XX-SER-SWFL-EXPORT component. After getting approval for the same from SAP Export dept., then & then only you will able to download it.
Regards,
Bhavik G. Shroff

Oracle db 11gR2 for windows server 2008(64 bit)

Hi,
i want to download the Oracle DB 11gR2 installable for windows server 2008(64 bit), but i am unable to find it in e-delivery or anywhere else in oracle website.
Please let me know if this installation is possible or not and the link from where i can download the installer.
Thanks in advance.

Hi;
All related information cover at below notes:
Statement of Direction: Oracle Database 11g Release 2 – Microsoft Windows 7 and Windows Server 2008 R2 [ID 867040.1]
Release Schedule of Current Database Releases [ID 742060.1]
Database 11g Release 2 Certification Highlights [ID 1065024.1]
Regard
Helios

Require list of all events for Windows Server 2008 Active Directory

Hi all,
I require list of all events for Windows Server 2008 Active Directory. Event Log name for Active Directory log is "Directory Service".
Regards,
SR

Hi,
Thanks for your posting.
Do you mean you want to list all Active Directory logs into one file named “Directory Services”?
If that, it’s hard to achieve. There are kinds of Active Directory logs stored in different locations and they have different file formats. It’s hard
to collect them into one file.
Active directory records events in the directory services log in Event Viewer. By default, Active Directory records only critical error events. To instruct Active
Directory to record other events in the directory services log, we need to modify registry.
For more information please refer to following MS articles:
Active Directory Diagnostic Logging
http://technet.microsoft.com/en-us/library/cc961809.aspx
How to configure Active Directory diagnostic event log
http://support.microsoft.com/kb/314980
Lawrence
TechNet Community Support

REQUIRED LINK OF SP2 FOR WINDOWS SERVER 2008 R2 STANDARD SP1.

pLEASE HELP ME TO DOWNLOAD A CORRECT SP2 FOR WINDOWS SERVER 2008 R2 STANDARD SP1.
REQUIRED LINK OF SP2 FOR WINDOWS SERVER 2008 R2 STANDARD SP1.

On Mon, 9 Mar 2015 11:34:37 +0000, AVINASHJHA wrote:
REQUIRED LINK OF SP2 FOR WINDOWS SERVER 2008 R2 STANDARD SP1.
This forum, as per the name, is only for Windows 10 Server questions.
Please repost to:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?category=windowsserver
Paul Adare - FIM CM MVP
If you have any trouble sounding condescending, find a Unix user
to show you how it's done. -- Scott Adams

How to install oracle 10g in windows server 2008

I want to install oracle 10 (10.2.0.4.0) in windows server 2008 R2 X64 bit version.
Previously i have test this successfully. But not it's giving an error during the installation
Enterprise manager configuratio failed due to the following error-
Error starting Database Control
Refer the log file at (path).....\emConfig.log for more details.
You can retery configuring this database wlth Enterprise Manager later by manually running (path).....\bin\emca script.
I tried to start the service manually from services. But it didn't work.
I tried to run that script using command prompt. but nothing happened.
in my start menu under oracle home db-console link also not there.
here is my log file
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Enter Enterprise Manager Root Password :
************Certificate was added to keystore
Certificate reply was installed in keystore
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.FileUtil printFileToLog
CONFIG: Printing file(After Secure DBConsole): D:\oracle\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_AX-2009_AX2009\config\http-web-site.xml
<?xml version = '1.0' standalone = 'yes'?>
<!DOCTYPE web-site PUBLIC "OracleAS XML Web-site" "http://xmlns.oracle.com/ias/dtds/web-site-9_04.dtd">
<web-site port="1158" display-name="OC4J Java HTTP Web Site" secure="TRUE">
     
     <default-web-app application="default" name="defaultWebApp"/>
     <web-app application="default" name="dms0" root="/dms0"/>
     <web-app application="default" name="dms" root="/dmsoc4j"/>
     <web-app application="em" name="em" load-on-startup="true" root="/em" shared="true" />
     
     <access-log path="../log/http-web-access.log"/>
     
     <ssl-config needs-client-auth="false" keystore="D:\oracle\product\10.2.0\db_1/oc4j/j2ee/OC4J_DBConsole_AX-2009_AX2009/config/server/keystore.test" keystore-password="BC062AD3D852A5B5D02E979B69DD12B3" />
</web-site>
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.DBControlUtil secureDBConsole
INFO: Database Control secured successfully.
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.EMDBPostConfig performConfiguration
CONFIG: Securing Database Control completed successfully .
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.DBControlUtil startOMS
INFO: Starting Database Control (this may take a while) ...
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: cmdType: 0
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Starting Windows service...OracleDBConsoleAX2009
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:54:18 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:54:28 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:54:38 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:54:48 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:54:58 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:55:08 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:55:18 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:55:28 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:55:38 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:55:48 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:55:48 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Initialization failure for service during start
Feb 7, 2011 11:55:48 AM oracle.sysman.emcp.EMConfig perform
SEVERE: Error starting Database Control
Refer to the log file at D:\oracle\product\10.2.0\db_1\cfgtoollogs\dbca\AX2009\emConfig.log for more details.
Feb 7, 2011 11:55:48 AM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Error starting Database Control
     at oracle.sysman.emcp.EMDBPostConfig.performConfiguration(EMDBPostConfig.java:646)
     at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:224)
     at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:193)
     at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:184)
     at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:436)
     at java.lang.Thread.run(Thread.java:595)
please if any one can give me any solution to run my database console. i don't know any method. i'm new to the oracle.
Thank you

I have checked that. but i also say that oracle 10g (10.2.0.4 ) support for windows server 2008 r2 X64.
Windows Server 2008 x64
Oracle Database 10g Release 2 (10.2.0.4 or later) for Windows x64 is certified on Windows Server 2008 x64 (all editions). 32-bit Oracle Database Client (10.2.0.4) and higher versions are supported on Windows Server 2008 x64.
I don'y think it's problem of os version or oracle version. Because when we purchase we asked from them what is the recommended version for our os. they told that 10g 10.2.0.4 is ok. previously i have installed this successfully. But now i can't.
however thanks for tried to help me. if u can find out any other reason\s please late me know..
thank you very much.

Do we need CALS for windows server 2008 R2 and 2012 R2 if 2008 R2 is just a stepping stone?

We currently have a server on Windows Server 2008 RC SP2 64-bit with approximately 20 clients.
We want to upgrade to Windows server 2012 R2 but first need to upgrade to Windows 2008 R2 to allow us to do a straight upgrade.
Is it possible to upgrade to Windows Server 2008 R2 with the 5 CAL's included and then upgradeto 2012 R2 and install 20 new CAL's and keep all users accounts and domain PC's the same?

Ok sorry for using the wrong terminology... I was under the impression for each client (Computer) connecting to the server we will need a CAL (Client Activation License) in order for the computer to be a domain PC on the server. Do I need 20 CALS's
for Windows Server 2008 R2 and then another for Windows Server 2012 R2 if we are only upgrading to 2008 R2 to be able to upgrade to 2012 R2 without having to do a clean install.
For WindowsServer (Standard edition or Enterprise edition or DataCenter edition), a Client Access License (CAL) is required for each device (if you're using the per-Device CAL licensing method), or, is required for each user (if you're using the per-User
CAL licensing method).
(whether you use per-Device, or per-User, is up to you, it comes down to cost).
CALs are version-specific (to a point) - i.e. if you purchased WS2008 CALs for your 20 devices, for use with your WS2008 server, and you are now upgrading that server to WS2012, you need to upgrade your CALs.
If you are adding a second server which is WS2012, and you are keeping your WS2008 server, you need to upgrade your CALs (because you only purchased WS2008 CALs which don't grant you the rights to connect to the newer server).
If you were to install your second server as WS2008, you wouldn't need to purchase additional CALs, because as long as the version is the same, a single CAL grant you access to unlimited server (of the same version).
CALs can be tricky to correctly license.
Here's some introductory reading:
http://www.microsoft.com/licensing/about-licensing/client-access-license.aspx#tab=1
And, none of this relates to the technical aspects of product installation/configuration at all (e.g. clean install vs. upgrade).
Windows Server CALs are not license keys/tokens/files which you install/load/download - Windows Server CALs are quite literally paper-based (just like a drivers license or car registration). You are required to have them, to be correctly licensed, but, you
don't physically do anything with them to own/drive a car.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Microsoft support for Windows Server 2008 R2 on vSphere 5.5

Hi, everybody.
I'm checking if Microsoft will provide support for Windows Server 2008 R2 running on a VM on vSphere 5.5 Update 2. So far what I've found at
http://windowsservercatalog.com is:
Filtering vendor VMware and Windows Server 2008 R2, it shows vSphere up to version 5.0 update 1
http://www.windowsservercatalog.com/results.aspx?&chtext=&cstext=&csttext=&chbtext=&bCatID=1521&cpID=2274&avc=34&ava=0&avq=0&OR=1&PGS=25&ready=0
http://www.windowsservercatalog.com/item.aspx?idItem=c92e5cbd-9690-b62a-2ace-843390ac3ea4&bCatID=1521
Filtering vendor VMware it shows vSphere 5.5 update 2, but details only Windows Server 2012, not Windows Server 2008 R2.
http://www.windowsservercatalog.com/results.aspx?&chtext=&cstext=&csttext=&chbtext=&bCatID=1521&cpID=2274&avc=0&ava=0&avq=0&OR=1&PGS=25&ready=0&PG=2
http://www.windowsservercatalog.com/item.aspx?idItem=ef39c5b2-2f5b-5b73-08e2-c07fecdadcff&bCatID=1521
Does that mean Microsoft doesn't support Windows 2008 R2 on vSphere 5.5 update 2?
I'm aware Windows Server 2008 R2 lifecycle is close to EOL, but customer requires this specific version for application compatibility.
Thanks

Hi mdgrkb,
Products that have passed the SVVP requirements for Windows Server 2012 R2 are considered supported on Windows Server 2012, Windows Server 2008 R2, Windows Server 2008, and
Windows Server 2003 SP2 and later Service Packs, both x86 and x64.
Look this website the top left additional information:
http://www.windowsservercatalog.com/item.aspx?idItem=ef39c5b2-2f5b-5b73-08e2-c07fecdadcff&bCatID=1521
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Requires Oracle client for windows server 2008 Version 6.1

Similar Messages

Maybe you are looking for