Requiring iPad to call for a password before displaying my mail

Right now, when I press the Mail icon on my opening iPad screen, I see all the incoming mail sent to my [email protected] email account. I am not first asked for a password. So all my mail is viewable to anyone who opens the IPad, a condition I do not want..
I have been told there is no way to require a password be set before the mail is displayed. Can someone confirm that? Or, better, can someone tell me HOW to change my settings so that a password IS requested before the mail is displayed?
Thanks.

I think the only way to do what you want is to use webmail instead of Mail.
You can tell Apple what improvements you want to see here:
http://www.apple.com/feedback/ipad.html

Similar Messages

  • ITunes no longer asks for my password before making purchases or updating apps

    iTunes no longer asks for my password before making purchases or updating apps... my restrictions are set so that is should ask for a password immediately but it doesn't seem to ask for this since iOS7... anyone got any ideas????

    Try changing Settings > General > Restrictions > Require Password to 'immediately'

  • HT1491 I want my ipad to ask for my password every time I buy something, is that possible?

    I want my ipad to ask for my password every time I buy something, can anyone help?

    Settings>General>Restrictions>Require Password>Immediately

  • Is autoconfig required to be run for apps password change

    Is autoconfig required to be run for apps password change -- We are only changing APPS and APPLSYS passwords.
    How to Change Applications Passwords using Applications Schema Password Change Utility (FNDCPASS or AFPASSWD) [ID 437260.1] -- does not mention anything about autoconfig.
    Please clarify.
    Thanks

    It's mentioned in the document twice
    1. For APPLSYSPUB/GUEST as you mentioned
    2. Under "Verify the new password" which cover the apps/applsys passwords
    If you search the doc for "AutoConfig" you will find it there.
    Thanks,
    Hussein

  • I changed my user name and password in Itunes, when I use my phone or Ipad, it askes for the password for the old username password it says it's invalid. I try to delete the Icloud account but it won't let me- Help

    I changed my username and Password in Itunes on my computer. Now when I use my Iphone, Ipad, it asks for the password for the old username. when I type the password for that old user name, it says it's invalid. I figured I needed to delete the old Icloud account from my Iphone and Ipad, but they ask for the old password for the Old username. I type it in and it says invalid. As of now, I can't use Icloud or Itunes on either the Ipad or Iphone.... Help!
    <Edited by Host>

    If the old ID ("username") is an earlier version of your current ID, temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll.  When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • Which settings are required to consume calls for stock transfers with planned independent requirements

    Dear SAP PP
         With strategy 10, which settings are required to consume calls for stock transfers with planned independent requirements?
    Regards

    Hi all,
    IF other configuration is require ?  How to implement this requirement?Also please explain in detail.  thanks

  • My Mac Mail constantly asks for our passwords before opening our accounts.  New iMac with OSX Maverick

    My Mac Mail constantly asks for our passwords before opening our accounts.  New iMac with OS x Maverick.  We get messages such as " Mail can't connect.  Appears to be offline due to network problems." or "The connection to the server (null) in port ) timed out."  I have confirmed server connections OK with Cox Communication and our Cox Webmail accounts.

    Hi Bob13524,
    Man, that definitely sounds frustrating! And it sounds like this issue is occurring with several accounts, so let’s see if we can troubleshoot this. The following resource provides some great information for troubleshooting Mail issues, including information on using the Connection Doctor:
    OS X Mail: Troubleshooting sending and receiving email messages - Apple Support
    http://support.apple.com/en-us/TS3276
    Thanks,
    Matt M.

  • Cant receive my yahoo mail on my latest ipad, keeps asking for my password, when I respond same message- password

    Suddenly can't receive my yahoo mail on my latest ipad, keeps asking for my password, when i
    put it in,same message flashes up, reset does not work, also waiting for apple time lapse, still does not want to give me my yahoo mail on this format, tried talking to apple online contact, cut off, I'm receiving through safari, nothing through my email app

    Give it time. Yahoo has been doing things to their servers that often muck up the Mail app. Usually it takes 24-48 hours to run its course then it'll work again.
    if it doesn't clear up by the end of the weekend, you can remove and readd your account, but chances are it'll just start to work.

  • I just changed my Adobe password and now I am trying to update Adobe flash player - it calls for a password - I just updated it - I use it again to install and it fails ??? What gives?

    I just changed my Adobe password and now I am trying to update Adobe flash player - it calls for a password - I just updated it - I use it again to install and it fails ??? What gives?

    Hi,
    Please see What userid & password do I need to install Flash Player?.
    Maria

  • My new ipad is asking for a password but i have never set one up

    i can't get into my ipad because it is asking for a password that i didn't set up.

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • I recently bought a 2008 mac pro which came with leopard 10.5. I can't load any new programs because it calls for a password, but it won't accept it. I bought new snow leopard 10.6.3 but I can't load it for the same reason. How can I completely reboot.

    Help. I recently bought a 2008 Mac Pro from Mac of all Trades. It came with Leopard 10.5 installed. When I set initially started the computer, I followed the instructions on the screen. I was asked to set up a password which I did. Since I'm very forgetful and not too tech savy, I wrote it down as I typed it in. I first went to install Office Mac 2011 but when it asks for a password, it won't accept the one I set up. I was told that if I bought the new Snow Leopard 10.6.3 and installed it, that it would reset everything. Well, it won't allow me to load it without the password. I am new to Apple - this is my first. I have always been able to "reboot" a computer with discs but I'm not sure how to do this one. Is there a way to do it without the password and reset everything? Could somone please email me
    Thank You. David Moore
    <Email Edited by Host>

    If you don't have original install disks for your Mac, you can order replacements disks directly from Apple at a nominal cost. The original install DVDs are required to reset the password.
    If you have no data on your drive that you want to keep, you can boot up from the OSX Snow Leopard disk and install OSX SL.
    Insert the Snow Leopard DVD and hold the C key during startup. The Mac should boot from the CD/DVD drive into the installer.
    Follow the prompts, erase the disk and install OSX Snow Leopard.

  • The AppStore asks for my password before 15 min iOS 6

    The AppStore keeps asking for my password even when I'm updating apps one by one

    Carolyn,
    You wrote: Open System Preferences and move this app: Google MACFuse or any other third party apps. Restart your Mac.
    You say "MOVE" this app: Google MACFuse or any other...
    Did you mean REMOVE or MOVE? If MOVE, how do I do that? If REMOVE I think I just right click the preference and then choose remove.
    Any other third part apps?- What might the ones be that are causing this - I generally have quite a few other third party aps from TextExpander.
    Thanks for any additional comments here before I try to do what you've suggested.
    Best regards,
    Steve Schulte
    Tuesday 6 April 2010

  • OCI 7 call for changing password

    Hi,
    I want to know if there are any OCI 7 calls for changing the password.
    Can anyone help me?
    Thanks

    No this was added in v8. You can just use the SQL to ALTER USER ...

  • What can I do if my computer asks for a password before booting and I don't know it?

    I have a toshoba satellite that is my sons.  I recently replaced the hard drive and now it is asking me for a password upon startup.. There is a black screen with a blue box asking for a password.  I have seen videos on how to remove but none of them apply to my model.  Any help would be aprpreciated.
    Model-L755-S5306

    If it's a power-on password set in the BIOS of the laptop, there's no way to remove it without professional servicing. If it's a hard drive password, the hard drive would need to be replaced. I'm sorry.
    - Peter

  • Firefox makes Yahoo ask for my password always to get mail

    '''bold text'''I got firefox to work perfectly with Windows XP on my main computer, but not on the laptop.
    The problem is simple - I have to uninstall Microsoft IE, to make things work perfectly. In the uninstal program of my laptop running on Windows 7 the Internet Explorer name is not visible. I know all about defaults, and Using windows to turn off the program. I HAVE TO UNINSTALL.
    All my passwords are stored to RoboForm. NO PROBLEM.
    But everytime I want to use Yahoo Mail it is asking me for my password. EVERY DARN TIME. On Windows EP I had this problem until I got rid of IE.
    I like fire fox, I want it. It is fast. But this problem stops me from using it.

    Websites remembering you and automatically log you on is stored in a cookie.
    * Create an allow cookie exception (Tools > Options > Privacy > Cookies: Exceptions) to keep such a cookie, especially for secure websites and if cookies expire when Firefox is closed.
    Make sure that you do not run Firefox in Private Browsing mode.
    * https://support.mozilla.com/kb/Private+Browsing
    Do not use Clear Recent History to clear the "Cookies" and the "Site Preferences"
    * https://support.mozilla.com/kb/Clear+Recent+History
    Clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
    *http://kb.mozillazine.org/Cookies

Maybe you are looking for

  • To P or not to P?

    I'm really confused with this issue, Progressive or Interlaced? I've looked over the forum but can't get a solid answer as to which one to use. I know about what they are and how they work but it still doesn't help me understand what I should use. Th

  • How make file association with a sgd application

    hi! I need to know, how i make file association from a sgd client. I need open file .doc with a sgd application just make doble click in the file .doc in the client SO: rhel5u1 i have word.desktop file [Desktop Entry] Version=1.0 Encoding=UTF-8 Name=

  • Tutorial for "aggregate based on dimensions"?

    Hi, has anyone seen a detailed, step by step explanation of how to use the "aggregate based on dimensions" functionality? I easily understand how this is used in "time based" examples - i.e. average balances over time, beginning and ending balances,

  • MP4 or AVI

    Hi All Am sure there will be some intelligent people out there, so a quick opinion from those who know Can someone advise if mp4 is better than avi, or vice versa.  From what I have gathered some say AVI has better quality then MP4.  So just wondered

  • How to create more kinds of singleton objects?

    Hello, in my application I need to create more objects. Every object does during its creation same actions (they differ only in one parameter) and add some own methods. These all objects should behave as a singleton pattern. Could you help me (differ