Requirment Urgent: How to format standard text in Script like two columns.
Hi,
I want to format the text in two columns like this.
1. This is the note. 5. This is the note.
2. This is the note. 6. This is the note.
3. This is the note. 7. This is the note.
4. This is the note. 8. This is the note.
I have to include a standard text and format like this.
Thanks in advance.
Hi,
You have to create a paragraph format and create two tabs according to your column positions.
and write.
,,&column1& ,,&column2&
Regards,
Wasim Ahmed
Similar Messages
-
How to center title text and table across two columns
Hello,
I want to be able to center a table and its title across a two column page. The pages where I want to do this contain text in both columns or text in the left column and graphics in the right. On the same pages as the text and graphics, I'd like to center, across both columns, a table with a title. What is the best way to do this?
If I insert the table in the left column, I can size it to fit over both columns but I can't type directly into the cells that cover the right column (I can type in the cells covering the right column if I Tab to them but it's tedious and doesn't seem right). With the table's title, I've tried using the Across All Columns paragraph setting, but the text stays in the column the paragraph marker is in.
We are using Frame 8 on Windows XP Professional. The Master pages are Right and Left pages that are set up with two columns, both tagged as A with the Autoconnect feature on so that the text flows from the bottom of the left column to the top of the right.
Please let me know what you think.
Thanks,
TimYes, equal-sized columns. No, they're always equal. And that answers
David's question: you're using two frames because you want unequal columns.
Frame's paragraph-level column controls only work on columns made by
dividing a single frame into two or more columns. So you're back to
square one: you need two frames because your columns are unequal; you
need one frame so you can span columns.
Another possibility is that you might set up your document with a
sidehead column, but I hesitate to recommend this because I still can't
quite envision what your layout looks like. Any chance you can post a
PDF somewhere?
Kenneth Benson
Pegasus Type, Inc.
www.pegtype.com -
How to add standard text in smartforms?
Hi friends,
How to add standard text in smartforms ?
points rewarded soon
Regards
RHCreating the Standard Text:
Go to SO10
1. Enter Text Name. For example, ZABC
2. Text ID ST
3. Language EN
Click on Create.
And enter the Required Information and save.
To include a Standard text in SmartForm.
Follow the steps below:
1. Create a text node in the window.
2. Under general attributes select "Include text" as Type.
3. Specify the fields under Text.
Text Name ZABC
Text Object TEXT
Text ID ST
Language EN.
Hope it helps.
Regards. -
Post Author: ftpaxa
CA Forum: Other
I use a SQL server DataBase on Windows server 2003 with service pack 2. i use Crystal Report 10 with ODBC connection. I read that the nice DLL is "Crdb_odbc.dll".I saw a VB code "How to format a text object" on this site :http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=crxiTechrefenpdf&sliceId=&dialogID=7686352&stateId=1%200%207680692--' Create a new instance of the report.Dim oReport As New CrystalReport1Private Sub Form_Load()' Declare a TextObject object.Dim oTextObject As CRAXDRT.TextObject' Declare a generic Object.Dim oObject As Object' Declare a Section object.Dim oSection As CRAXDRT.Section' This variable is set to true once the' text object is found.Dim bText As BooleanbText = False' Search for all the report objects in each section.For Each oSection In oReport.SectionsFor Each oObject In oSection.ReportObjects' Find the first text object.If oObject.Kind = crTextObject Then' Get the text object and exit the loop.Set oTextObject = oObjectbText = TrueExit ForEnd IfNext oObjectIf bText Then Exit ForNext oSection' Format the text object and change the text.With oTextObject.BackColor = vbYellow.BorderColor = vbRed.BottomLineStyle = crLSDoubleLine.CanGrow = True.CharacterSpacing = 125.CloseAtPageBreak = True.FirstLineIndent = 25.Font.Italic = True.Font.Bold = True.Font.Size = 14.HasDropShadow = True.Height = 900.HorAlignment = crLeftAlign.KeepTogether = True.Left = 200.LeftIndent = 750.LeftLineStyle = crLSDashLine.MaxNumberOfLines = 16.RightIndent = 250.RightLineStyle = crLSDotLine.Suppress = False.SuppressIfDuplicated = True.SetText "Hello World".TextColor = vbBlue.TextRotationAngle = crRotate0.Top = 25.TopLineStyle = crLSSingleLine.Width = 3000End With' Set the report source of the viewer and view the report.CRViewer1.ReportSource = oReportCRViewer1.ViewReportEnd SubSo, i would like to do the same thingswith winbatch language. I tried this code :;Get CrystalRuntime Application Object HandleobjCra = ObjectCreate("CrystalRuntime.Application");Logs on to on or more SQL servers or ODBC data sources.objCra.LogOnServer("Crdb_odbc.dll","Magic","xxx","xx","zzzz") ; ("DLL file", "Server", "dbname", "username", "password"); open the saved reportobjReport = objCra.OpenReport("C:\Download\Perso\Programmation\Winbatch\Crystal Report\Final\rapport exploitation - abend.rpt")objReport.DiscardSavedData()TxtObj = objReport.Sections("PHb").ReportObjects("Text11")txtObj.Text = "testing" ; *** Error on this line : 1266: Ole:Bad Param Count;Export htmlPathHTML = strcat("C:\Download\Perso\Programmation\Winbatch\Crystal Report\Final\Resultat\rapport exploitation - abend.htm")hfile = PathHTMLcre = crr.ExportOptionscre.DestinationType = 1 ; diskfilecre.FormatType = 32 ; 24 = (HTML 3.2 standard), 31 = (PDF), 32 = (HTML4.0) cre.HTMLFileName = hfilecrr.Export(BOOL:@false)objectclose(cre)objectclose(objReport)objectclose(objCra)exit--
Everythings work good except this linetxtObj.Text = "testing" I receive this error :1266: Ole:Bad Param CountI may be don't have the nice recipe. If you have a solution, it is welcome.Post Author: KAM
CA Forum: Other
Try using SetText. Thanks. -
How to use standard texts in smartforms
Hi Friends,
How to use standard texts in smartforms, ie in scripts we are using standard texts using tr so10.
thanks in advance,
regards,
sharma.For long text
method1
Create TEXT node- general attributes change text type to include text
then you can input text name/text object/text id/language
method2
create PROGRAM LINE node - use FM READ_TEXT to read it to a internal table
then use LOOP or TABLE node to display it
For TEXT module(For foreign language)
Tr-code:smartforms -- choose Text module(not choose form)--create a text module object
then enter smartform Create TEXT node- general attributes change text type to text module
input the text module name which created by above
btw SO10 is just for Scriptform, in smartforms we use text module to replace SO10 -
How to use Standard Text in ALV
How to use Standard Text in ALV header part? Can you please help me by giving the answer?
Hi ,
You can read the Standard text using read_text function module and then print in LV header part. -
Pls explain how to add standard text in sapscript & smartforms
Dear friends,
pls explain how to implement standard text into sap script and smartforms.
in how many we can do.
and what is diff between include text & text modules in smartforms.
how we can translate into multiple languages.
Regards
Jagadeeshwar.Bhi,
for the include text goto tcode so10.
for changing the smartform and scripts use there methods..
1. goto se63>translation->abap objects->other long texts->FS Forms and Styles---> for scripts use Forms
for smartforsm use SAPSmart form
for styles use Styles
2. goto se71->utilities->original language.---> source lang
(for scripts) target lang
to include the include text created in the tcode so10 in the smartforms go to general attributes of the text element--text type> include text...
regards,
venkat.
Edited by: venkat appikonda on Mar 22, 2008 11:56 AM -
How to add standard text in PO and how it is maintained ?
How to add standard text (paragraph) in PO and how it is maintained ?
Hi
Please go through this document.which has a step by step
Working with Frequently Used Texts
Use
You can copy texts from various sources to create PO texts:
Standard texts
Certain standard texts are supplied with the system and can be assigned to a purchasing document in Customizing.
The content of some standard texts is predefined by your system administrator.
You can also create standard texts yourself and copy them into purchasing documents.
Master records
Database fields
Activities
Creating Standard Texts
You can create your own standard texts via Tools ® SAPscript ® Standard text.
Inserting Standard Texts
You can insert your standard text on the long text screen via Insert ® Text ® Standard.
For more information, refer to the Basis documentation under BC Word Processing with the SAPscript Editor: Including Texts.
You can display the print preview via Text ® Print ® Print preview.
Inserting Texts from the Master Record
There are three ways of linking texts from a master record with a purchasing document. The relevant settings are made for each text type in Customizing for Purchasing. The indicator in the status column shows the nature of the linkage.
Option Indicator in status column
The text is copied:
It is then independent of the text None
in the master record. Changes to
the text in the material master record
have no influence on the text in the document.
The text is displayed only:
It cannot be adopted. N
The text is offered for copying:
It can be copied via Header or Item ® Texts ® Adopt text. (In requisitions: Goto ® Texts ® Adopt text.) Changes made in the master record will also be adopted in the document until such time as you copy the text.
Inserting Texts from Database Fields
You can include the content of a database field at any point in the text on the long text screen. A value specific to the relevant document is displayed in the printed document.
Choose Insert ® Symbols ® Program symbols.
Choose DDIC fields.
Search for the relevant table/structure (in the case of PO items, this is EKPO) and then choose ENTER .
Choose the relevant table field.
Choose Text ® Print preview to see the print preview.
Reward if useful
Aasif -
How to Transport standard text in scpits from 1 client to other
HI I am veerendra,
Can you please tell me,
How to Transport standard text in scpits from 1 client to other
THanks,
VeerendraHi veerendara,
1. a little tricky
2. goto se09 and create a new
customizing rqeuest.
3. after that
in the object list,
go in edit mode
and a new window will come
where u can add the objects(in table control)
4. there u put
program id = R3TR
object type = TEXT
object name = TEXT,YHRS_FNF_LTR,YHR1,E
where
TEXT = TEXT
YHRS_FNF_LTR = name of standard text
YHR1 = TEXT ID
E = english language
regards,
amit m. -
How to change standard text in(me33k)?
How to change standard text in me33k (under Reference data : Dept/Proj Manager) field. I tried it changing in CMOD - under Goto in Text enhancements in Keywords then Change . I did this change and in table ekko-verkf I can see the change, but in me33k I cannot . Appreciate if anybody can reply back soon and help me solve this issue? points awarded for sure.
If u are talking about the text related to a Contract by (Trx ME33K --> Header --> Texts --> Text Overview).
Then u need to use the FM create_text and then put the import parameters as
Text Name = (contract number)
Language = EN
Text ID = K00 Release order header text put K01 for first item text K02 for second item text so on
Text object = EKKO Purchasing doc. header texts
and then call bapi_transaction_commit
u ll be a ble to find the changes
thnks
kanishak -
How to change standard text in portal
How to change standard text in portal
Pls replyArchana,
Please post it in the relevant forum(Portal Implementation/development)
What text do you want to change.
Thanks
Bala Duvvuri -
How to impert standard text?
hi,
can anybody tell me how to import standard text?hi Sudheer
every long text will be associated with a text id , text object, txt name
even the program given in the above reply is also using these
CALL FUNCTION 'SELECT_TEXT' < from the above std prog
EXPORTING DATABASE_ONLY = 'X'
ID = TEXTID
LANGUAGE = TEXTLANG
NAME = TEXTNAME
OBJECT = OBJECT
IMPORTING ENTRIES = ENTRIES
TABLES SELECTIONS = SELECTIONS
T_NAME = TEXTNAME.
so to pull long text of any object take the above mentioned parameters and hit the table STXH or use read_text FM -
Hi..how we enter standard text for smartform using include text
hi
guru
..how we enter standard text for smartform using include text..
i know only using so10 we write text..
in smartform it asking text-object
text-id,
so what values we should give to get textHi,
Do u want to print Standard Text or the Texts that are maintained at the Transaction level.
If it is standard text , then u use text id as ST or if it is Texts that are maintained at the Transaction level then u have to go to that specific transaction and check for that text , then go to text editor ,in the goto menu u have header data where u get the Text id , text name.... , use them in ur smartform in the INCLUDE text.
Further u have the option of text modules in smartforms which act as standard texts, so if u r going for creation of standard texts then its better to use text modules.
Regards,
Shafivullah Mohammad -
When I save a page under text format, the text is limited to 80 columns only, how to extend to 120 columns (or more)?
HI K,
This is the Numbers (Mac OS) forum. Your question about Numbers for iOS will probably get better results posting in the iWork for iOS area. the link will take you there.
Regards,
Barry -
Using Standard text in scripts
Hi all,
I had a problem while printing standard texts in scripts.
I Know how to print standard text if we have to print it from the begining of window using
INCLUDE &T024E-TXADR& OBJECT TEXT ID ADRS LANGUAGE &EKKO-SPRAS& PAR
But my problem id i have print it after a hard coded text like
Delivery schedule: 'here i have to print the standard text'.
can any one please help me out how to solve the problem
Thanks & regards
sreehari pHi,
Here's one my brother taught me - you can actually trick the system to accommodate this requirement.
Ensure that you use 2 different paragraph formats in your INCLUDE statement, using the PARAGRAPH and NEW_PARAGRAPH clauses, ie.
INCLUDE &T024E-TXADR& OBJECT TEXT ID ADRS LANGUAGE &EKKO-SPRAS& PARAGRAPH P1 NEW-PARAGRAPH P2
Paragraph P2 (which will be used as the first line) should be created as having a Line Spacing value of 1 TW (1 twip) which is less than 1/1000th of an inch. Also, set the Left Margin value to an offset which brings the text to the right of the Delivery schedule literal.
Paragraph P1 (which will be used for all subsequent lines) should be set up as normal - ie. use the same paragraph format as that for displaying your "Delivery schedule:" literal. If you need the text to be indented in line with the first line, then copy your existing paragraph to a new paragraph but set the Left Margin value to the same as that in P2.
What this does is to output the first line of text indented by the margin after skipping 1 twip, giving the illusion that it's actually on the same line. Since subsequent lines are output with a normal (or normal/indented) paragraph, that just follows with normal spacing on subsequent lines.
Hope this makes sense.
Regards, Andy
Maybe you are looking for
-
Error while trying to generate SAP Query
Awaiting reply... Hello ABAP Experts, I tried to add REGUP-BUDAT to a query infoset, which already had BSAK and LFA1 table. While generating I get the following error message: Global syntax check Additional tables Error in code for table REGUP Field
-
Animated gif is tiling when opened on iPad email
I am trying to design a simple email blast with an animated gif which i have been doing so for 5 years. today, i designed a new email blast for my client and it works perfectly on all my email accounts including mac mail and thunderbird. however, whe
-
Relatively new to the Final Cut Pro X thing, so I may be missing something stupid, but here goes... I am trying to import from a GL2. I go to camera import and gain camera control... I then start importing. Problems start when it plays, it creates
-
SGOS_URL_CREATE_DIALOG
Good morning, does anybody knows how can I use this function module to include a URL in a Material. This function is used to upload hyperlinks as a services for object but I don't know how can I use it? Regards
-
ASIO not working with Windows Vista Ultim
Hi?I got the beta driver for my Audigy 2 zs platinum pro but now my ASIO is not working. I should I install my software all over again, and then update the driver to the beta drivers again or will it still be the same problem. Anyway can some one hel