Requisition Creation -- E-Recruiting
The manager create requisition in management involvment, no. She hit "Save draft" button. Now, where she see this draft requisition. I see it in Requisition Overview, but when I click on the requisition / click details button it display details but no same requisition.
So, how can manager go back to same requisition, and "check and Send".
Hi,
If you you are using Portal then ideally the save as draft item should be in Universal Work List. Please ask the manager to check the UWL. It should be there.
Thanks & Regards,
Sandip Biswas
Similar Messages
-
Requisition Creation -- E-Recruiter
When the requisition is created by the recruiter (in the recruiter role) , how does it get approved by the manager. Is there a delivered workflow available
Hello,
For the Requisition Request you have the following workflows:
- Without approval: WS169000009
- With manager approval: WS16900010
You can have further information on note 949625.
BR,
Bentow. -
BAdI for during new requisition creation in e-recruiting
Hi,
How to check what BAdI being called when new requisition created in e-recruiting?
Given BAdI HRRCF00_GET_ASSIGNED_SGR to add support group when new requisition is created.
But the BAdI was not triggered after i created new requisition in e-recruiting.
Greatly appreciate for any helps/comments.
Thanks.E-Recruiting specific BADIs are not called in functions which are built in the ABA.
E-Recruiting BADIs are just used in E-Recruiting functions and classes.
The support team group BADI belongs to the new Manager process implemented in the new MSS scenario.
The easiest way to assign a support team to a requisition automatically, is by implementing a workflow, which is triggered by ERC_OBJECT ObjectCreated.
This will automatically assign anything you want. But in this case you will have the problem, that you can just assign a generic support group to a requisition, because no data was entered before.
Another possibility is enhancing a specific BSP-Application by using the enhancement framework. Post-Exists on class methods might help you. But you need to identify that specific BSP application, which is called during the specific save you need in order to have the right criteria provided.
Regards. -
Error code 083 on LSMW - Purchase Requisition creation
Hii all,
I have generated a bapi program for purchase Requisition creation.
the followings are the programe details:
Business Object
BUS2105
Method
CREATEFROMDATA1
Message Type
PREQCR1
Basic Type
PREQCR101
I have divided the structures into 3 sections:HEADER,ITEM DETAIL,ACCOUNT ASSIGNMENT.In the account assignment group at the "Maintain Field Mapping and Conversion Rules" (E1BPMEREQACCOUNT), wbs element field marked as "move".
At the "E1BPMEREQACCOUNTX" the wbs field was mared as "X".
the programm can read the feild & displays the WBS element that it can read from the datafile.
the problem is that during the stage of " Create IDoc Overview"
it provides the following error:
Enter WBS Element
Message no. ME083.
I have checked the WBS element& nothing is wrong with it.
any one can help me out on this?
thanks
M SHi Jurgen,
Thanks for replying.
1. For BAPI, at step 14. when i execute, it is a warning message
No Data could be selected
2. yes, I have activated the IDOC Settings.
Please suggest.
Thanks,
Sahil -
Problem in Purchase Requisition Creation
Dear Experts:
We are facing a problem while purchase requisition creation. We have created an Internal order No. 600406 and an Asset in Company Code AB01 but while creation of Purchase Requisition level when we are selection that Order and Asset in Purchase Requisition system automatically changing my Order no. 600020 instead of 600406. I've checked OKB9 where Order no. maintained as 600020 against Company code AB01 which I deleted and save but after that Purchase requisition asking for Order Number that means we have to maintain Order number in OKB9. Now can you please advise how can we get my current order number in requisition instead of any default number.
Thanks in advance and your kind suggestion is highly appreciated.
Best Regards.
Ripon Kumar PaulPlease find attached screen shots of OME9
-
Recruiter dropdown in Requisition Request (E-Recruiting)
Hi Experts,
I'm facing trouble when click dropdown list for recruiter in PDF form for create requisition in e-recruiting module. In Development system the recruiter field is filled automatically and the dropdown is working. But how may the error happen in The Tesing client (QA) after all are transported, only the recruiter field is not working properly, it's not filled automatically and the dropdown button is not work. The other input fields are okay.
I try to debug and found that EREQ_RECRUITER_PERNR varible is has some value of recruiters, so the data collection was fine.
Anybody can help or at lease sharing idea and experience.
Thanks alot before.
ADrikavideHi,
I'm facing the same problem and cant populate recruiter downdown field.
Did any one solved this problem?
Thanks a lot.
Best Regards,
Shiva -
No Subcontracting Purchase requisition creation
Hello everybody,
I have a strange system behavior : the external purchase requisition creation at Production order type level (AFVG-AUDISP) is set to "3", so I want that the system always create automatically the related purchase requisition.
It randomly happens that certain number of production order are created without purchase requisitions, and into the external operation the system "automatically" move the external purchase requisition creation to "1".
Looking into the OSS notes I found the note 1493286, unfortunately there is inside just a workaround and I am not able to reproduce the behavior.
I know that the value "1" is placed because the system is not able to create the Purch Req, but I am not able to find the real reasons in order to remove them.
We are speaking about "kanban" order creation... is there someone that had similar problems ?
Could you please help me ?
Thanks
Salvatore TestaCreating (ME51N) is not changing, hence you dont have change documents in CDHDR and CDPOS.
And the table EBAN just has a creation date, but not creation time.
SAP is probably the opinion that the creation time of a requistion is not needed for an ERP process.
(Adding a new item to an existing requisition is a change and will update CDHDR) -
Purchase Requisition Creation From Release
Dear PM Gurus,
For Manual material availability Check to work before release, the Purchase Requisition check is to be set to Immediately in SPRO-> Define Change Docs and Collective PR or Activating Pr from Now On from Maintenance Order. The issue is that I want to restrict the creation of Purchase Requisition to Release of Maintenance Order but what is happening is upon saving the Maintenance Order, the PRs for all non stock materials are created and I also want the manual availability check to work before release.
Simplifying above details:
I want Manual material availability check to work and PR generation from release both in my Maintenance Order to work..
Regards..Hi DP Singh,
I had seen the configuration settings that you are telling me but you see the Problem is:
If in Define Change Docs, Collective Purc. Req. Indicator, Operation No. Interval, you define the Res/PReq Indicator as Immediately, then the Manual Material Availability Check would work accurately but upon saving the Order, System would generate the Purchase Requisition.
and If in Define Change Docs, Collective Purc. Req. Indicator, Operation No. Interval, you define the Res/Preq Indicator as From Release, then the Manual Material Availability Check would not work as no material is as such MRP relevant till the time of releasing the Order but the Purchase Requisition would be created only when the Order is released.
Now What I want is both the Manual Availability Check to work and Purchase Requisition Creation From Release, but this is not possible according to the Standard SAP System. A workaround could be that I configure the automatic material availability upon release and configure the Res/Preq indicator as From Release, that way the material availability would be checked when the order is released and Purchase Requisitions would also be created from Release but still the Manual Availability Check would not work.
The Ideal Solution should have been configuring the Res/Purchase Requisition Indicator for all Non Stock Materials to be From Release and the Res/ Purchase Requisition Indicator for all Stock Materials to be Immediately. This way your manual availability Check would work for all Stock Materials and Purchase Requisition for all Non Stock materials would only be created upon Release. But this But still this is an ideal solution not the actual solution for standard SAP does not give you the flexibility to do such a setting in customizing or using Enhancement.
The Work Around Solution given by SAP is as follows: The system provides the following workaround:
After you change the indicator for materials planning-relevance to
"immediately" you can execute the availability check as required. You must
not save the order or network.
Regards,
Muhammad Usman Kahoot
Edited by: Usman Kahoot on May 27, 2010 1:32 PM -
Materials available only for Purchase requisition creation
Hi Experts,
My client wants some materials available only for Purchase requisition creation and some materials donu2019t want available only for Purchase requisition creation.
How we can control
Thanks in advance,
Chandhu1) Solve your issue first you have to bifurcate between the materials where requisition is possible & where not...u can do this by selecting some field which is not in use presently in material master-basic data view & maintain some unique value for those materials for which PR will be not possible....otherwise check whether you can bifurcate it through material groups or not...
After this take help of your ABAP person and implement BAdI::ME_PROCESS_REQ_CUST...here use the logic that after user enters the material code in PR system will check in the background what has been maintained in the said field in the basic data view of the material...if found blank then it will allow the user process further or if found any data in that field then system will stop the user from processing the same by throwing some customized error message.
2) Use the Plant-sp.matl status in purchasing view as Blocked for procment/whse for those material against which you don't want to create any PR.But this will be plant specific and both PR & PO will get blocked.
Regards,
Indranil -
Re: Purchase REquisition creation with ref to SAles Order
Hi All,
I need help on an issue.
I have sales order creation and when saving Purchase REq is created at the back end. But for the sales order for item category n schedule line category combination does not allow creation of Pur Req. n pur req no. is not dislayed in Sales order.
But I have Pur Rq created with ref to sales order.
How is it possible.
In Pur req I checked the creation indiacotr, it is with ref to sales order.not manually.
Can you please help it out..
Regards,
SmithaHi,
Purchase Requisition creation from Sales Order is dependent on the configuration of Schedule line category not Item category. Check configuration of Schedule line category in VOV6.
Also to see the PR No in Sales Order, double click on the Sales line item and click on the "Purchase Requisition" button under "Schedule Lines" Tab. -
Problem when created a requisition in e-recruiting
Hello all,
We are trying to crate a requisition in e-recruiting, but we have some problems:
When the recruiter star search to select a position, the positions under an Org. Unit apperar with the same incumbent, for example: The recrutier search for the Org. Unit "XXXXX" and all the postion under this Org. Unit have the same incumbent. If the recruiter select one of these position, an internal error occurs. When we check the T.CODE SLG1, the message text for the error is: "No candidate could be found for US CIOTTA".
So I have some question:
1.- How to solve the problem (obviously)
2.- In the normal, the incumbent of a position is the person who is sitting in the position?
3.- where the system looks for this information (incumbent) in EREC system or in HR system (we have standalone instalation)
Please I really need some help...
Thanks for all
E.Ciotta
RegardsPlease help me with this problem
-
Requisition Creation Process from MSS in E-Recruiting-EHP4
Hi
I have the client requirement, that any of his managers should be able to create the requisition and submit it. It should go to the Recruiter and then assigned Recruiter should be able to do the job posting etc.
Once the candidates applied to those requisitions, Managers should be able to see the number of candidates applied for and also their status.
Please tell me, how this could be achieved and what all steps I have to do for this? I also noticed, that HCM forms and processes overview page is coming as blank. Do I also need to install Adobe Interactive Services
Thanks and Regards
RosyHi Rosy,
First try out creating a requisition and have a workflow routed to the managers.
See that all managers have the authorization to create requisition.
You have to define the recruiter role, recruiter admin role, restricted recruiter role also.
check for standard workflows through swdd tcode and explore things.
thanks
rafi -
Item category determination during Purchase Requisition creation from APO
Im creating a SNP Purchase Requisition in APO and when it is published to R/3, a Purchase Requisition document is created in R/3.
When this PR is created in R/3, I want the Item Category to be determined based on the Material master Special Procurement Type. ( eg: Id like the Item category to be L if the Material master Special Procurement Type = 30 (Subcontracting) ). But by standard, this field is coming as Blank and this field could only be populated during the creation from APO.
I found a user exit ( CIFPUR02 : Enhancement of Purchase Order Interface (Inbound) ) on R/3 where I tried to populate the Item Category, but when I do this, all the purchase order related data is getting deleted and hence no PRs are getting created in R/3.
Could anyone please tell me if this could be resolved using configuration and if not any tips to do this technically would be very helpful.
Thanks,
HarshaHi Karun,
This is the code i'm using...
select single * from marc into lit_marc
where matnr = c_eban-matnr
and werks = c_eban-werks.
append lit_marc.
read table lit_marc with key matnr = c_eban-matnr
werks = c_eban-werks
sobsl = 30.
if sy-subrc = 0.
c_eban-pstyp = '3'.
endif.
Here sobsl = 30 is the Special procurement type
But when i try to populate c_eban-pstyp = '3', during the creation of Purchase Requisitions in R/3, in the program SAPLEMPI -> LMEPIF01
this condition is encountered which deletes all the data in the tables that is used to create Purchase requisitions.
<i>* get rsnum in the case of subcontracting
IF XEBAN-PSTYP EQ PSTYP-LOHN AND "RB240999
EXITFLAG_ORDID IS INITIAL. "RB240999
refresh all component tables
CALL FUNCTION 'ME_COMPONENTS_REFRESH'
EXCEPTIONS
OTHERS = 1.</i>
Could you please suggest me anything to get around this.
Thanks,
Harsha -
Purchase requisition creation (STO) from Sales order
Hi Gurus,
Read the following scenario:
Sales order is created with delivery plant A. No stock on plant A.
Purchase requisition is created from plant B to plant A (intra-company flow or stock transfer order).
Problem is that the purchase requisition needs a price. It is not logical because intra-company flow (stock transfer in same company flow) is like a stock transfer without purchasing. So in my mind, I don't have to maintain price.
Also if I use ME27 to create manually STO between both plants, price is not asked.
Other question is: is it possible to create directly a purchase order when sales order creation (and not purchase requisition, newt convert into PO)?
Many thanks.
StéphaneHi Stéphane Vituret, Did you manage to find a solution for this. I have a similar problem as well.
Please find the scenario below.
Cusotmer places order of Mat-XX to Company A. The Company A creates PO to Company B. Company B delivers to Company A and then invoices Company A. Company A receives the goods into own stocks. Now the Company A delivers to the customer from its own stocks and then invoices Customer.
I decide to go ahead with the Individual Purchase order solution and since the Company A is buying from Comapny B, I decided to integrate the Cross Company STO flow in the procurement part. Hence the flow in SAP is like;
Cusotmer placese order to Company A
Comapny A creates a Individual Purchase order type Sales order. So the Item category is TAB.
This sales order generates a PR. PR is conveted into a CC_STO as thenvendor is Plant B in this case . Now this STO appears in the delivery due list of plant B.
Now I genreate the delivery to move stocks from plant B(of co.cd B) to Plant A(of co.cd A).
Here is the problem. I am not able to do PGI as the system checks for "sales order" stock at plant B and throws error
"Sales order stock 36637 000010 does not exist". This should not be the case as the stocks should get attached to the sales order only when recieved into Plant A. Hence system should not check for "sales order stock" at plantB while trying to deliver from Plant B to Plant A.
Lets take a normal IPO scenario.
CusotmerA places order of Mat-A to Company A. This sales order generates a PR. The Company A converts the PR into a std.PO to external vendor. The PO from the sales order will have a account assignment "M- Ind. cust. w/o KD-CO". The stocks will be received into Plant with spl indicator "E" while GR (MIGO). Now the system ensures that this stock can only be delivered against the particular sales order. Thus the stock procured for the customerA is delivered to customerA and not consumed by anybody else. In this case there is only one delivery involved, in SAP, which is 601 mvmt type from the Plant A.
However if the vendor becomes another Plant (Plant B) belonging to another company code then there are two deliveries involved in the SAP system one with mvmt type 643, from Plant B to Pant A, and the second with 601 from Plant A to the customer. Hence the system should check if the stocks are attached with a spl indicator only during the second delivery of 601 mvmt type. I am facing a problem because the system does it for the first delivery itself. If you know the answer please do let me know. I really appreciate it. Thanks a lot in advance. -
Problem in Create Requisition Request E-recruitment
Hi,
I have configured the standard workflow WS45600028 for the E-recruitment process in HR administration services and able to trigger the workflow successfully when I create requisition in the portal.
But the workflow fails at the first step 'Import the form data' since the method CL_HRASR00_WF_COMPONENTS-->DATAMAPPING)raises an exception when there are no entries in table T5ASRSCENARIOS.
The case configuration is absolutely fine but yet am unable to figure out why any entries aren't created in the table T5ASRSCENARIOS.
How the first entries are created in table T5ASRSCENARIOS? Is it through customising?
Quick response will be highly appreciated.
Thanks,
RoopeshInputs will be highly appreciated.
Thanks,
Roopesh
Maybe you are looking for
-
Which is faster - Member formula or Calculation scripts?
Hi, I have a very basic question, though I am not sure if there is a definite right or wrong answer. To keep the calculation scripts to a minimum, I have put all the calculations in member formula. Which is faster - Member formula or calculation scri
-
Hi Experts, I am getting the below error msg while running payroll for an US employee. "The gross wages do not cover the negative offset that has been forwarded; therefore, no grossup is permitted." I am getting this error msg just after USTAX functi
-
Adobe Reader 9 Mac - cannot copy images
I upgraded to Reader 9, and another person in our office is using 8 with the same problem. We can no longer copy images out of a PDF - when we try to paste an image that appeared to be copied we only get a gray box. We've tried many ways including pa
-
Calling a procedure using JDBC-OCI
When I use setPlsqlIndexTable for calling a procedure using JDBC-OCI ps.setPlsqlIndexTable(1,str,10,str.length,OracleTypes.VARCHAR,8); always throw a Exception : java.sql.SQLException: Non supported character set: oracle-character-set-832 at oracle.g
-
Need help regarding short dumps in BW
hi all, We have a problem in our production.Thousands of short dumps have been created in a day stating "Runtime Errors DBIF_RSQL_SQL_ERROR Exception CX_SY_OPEN_SQL_DB" ===================== An exception occurred. This exception