Requisition Import Output message
Hi
I am getting note message in PO Requisition Import Output Report , Requisition is getting created but output of report is printing Invalid Operating Unit at the bottom of the Report. All the profile options are set correctly for the responsibility. Please let me know if there is anything which is missing that is resulting in the note message.
Requisition Import Run Report Date: 07-JUL-11
Number of approved requisitions created = 1
Number of unapproved requisitions created = 0
Number of interface lines in error = 0
End of Report
Invalid operating unit
Thanks In Advance.
Regards
Rajeev
Hi Rajeev,
You mentioned : Output of requisition Import report is printing Invalid Operating Unit at the bottom of the Report and you are in 11.5.10.2.
I have executed the "Requisition Import" program in our 11i system and didn't find the OU information in the report. Report details are as below :
Requisition Import Run Report Date: 14-JUL-11
No requisitions were created
Number of interface lines in error = 0
End of Report
Is your Requisition import program is customized to pick the OU in the report???
Could you please check/execute *"Requisition Import exceptions Report"* and check what OU is getting picked in this report.
Kind Regards,
S.P DASH
Similar Messages
-
Purchase Requisition and Reservation Print out - Output Message determinatn
Dear Experts,
Can Anybody please explain the process of Output Message determination for Purchase Requisition and reservation.
Thanks in Advance
VijayHi,
There is not standard message determination, you have to customized the transaction and output for PR & Reservation. -
Requisition Import is taking long time to complete
Hi,
I'm working with EBS 11.5.10 CU2, I have Requisition Import program scheduled, usually it's completing normal in around 5minutes; but sometimes it's taking around 30 minutes to complete. I compared the output files of program completing normal and taking long time, latter one has processed less requisitions than former one.
Could somebody help what could be possible reasons to check for program to take long time to complete.
Please help.
Thanks945756 wrote:
Hi,
I'm working with EBS 11.5.10 CU2, I have Requisition Import program scheduled, usually it's completing normal in around 5minutes; but sometimes it's taking around 30 minutes to complete. I compared the output files of program completing normal and taking long time, latter one has processed less requisitions than former one.
Could somebody help what could be possible reasons to check for program to take long time to complete.
Please help.
ThanksDo you have the statistics collected up to date?
Please enable trace and generate the TKPROF file to find out why it takes that long -- https://forums.oracle.com/forums/search.jspa?threadID=&q=TKPROF+AND+Concurrent&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein -
R12 Requisition Import erring out saying Multi Distributions
Hi Sandeep,
I've referred this thread where you have given ur suggestion
R12 Requisition import for the Back to back order items
I've the same issue in the Requisitions Import. I've one record in po_requisitions_interface_all and related record in po_req_dist_interface_all table. And enabled
multi_distirbutions set to 'Y' in the po_requisitions_interface_all table. The requisition import is submitted by saying the parameter multiple distributions to 'Yes'.
But even then it is saying the same error
'You have specified multiple distributions to be created. There are no rows in the requisition distributions interface table.'
We are into R 12.1.3 version of Oracle apps. I tried all the means can you please give me any inputs for this issue.
Thanks in advance for your help.
Regards
NagendraHi,
I've distributions data there in the po_req_dist_interface_all and multi_distributions also set to 'Y' in po_requisitions_interface_all.
When submitted the requisition import by setting the parameters Multiple Distributions'Y' it error out saying the error message
'You have specified multiple distributions to be created. There are no rows in the requisition'
Though I've records there in the distributions interface table, but still throwing the same error message.
Any hints on this. As our requirement is to use the multiple distributions in R12. Please confirm if any thing I need to do from my end.
Regards
Nagendra -
[04.01.2014 21:41:55.0743] [1] 0. ErrorRecord: System.InvalidOperationException: Running the command 'C:\Windows\system32\inetsrv\appcmd.exe add backup IISBackup130408621156784845' failed.
Output message: ERROR ( hresult:80070002, message:Command execution failed.
The system cannot find the file specified.
Error message:
Process exit code: 2.
[04.01.2014 21:41:55.0746] [1] [ERROR] The following error was generated when "$error.Clear();
configure-WSManIISHosting -EnableKerberosModule;
" was run: "Running the command 'C:\Windows\system32\inetsrv\appcmd.exe add backup IISBackup130408621156784845' failed.
Output message: ERROR ( hresult:80070002, message:Command execution failed.
The system cannot find the file specified.
Error message:
Process exit code: 2.".
[04.01.2014 21:41:55.0746] [1] [ERROR] Running the command 'C:\Windows\system32\inetsrv\appcmd.exe add backup IISBackup130408621156784845' failed.
Output message: ERROR ( hresult:80070002, message:Command execution failed.
The system cannot find the file specified.
BlatniSTry this instead in an Elevated PowerShell
Import-Module WebAdministration
Backup-WebConfiguration -Name MyIISBackup
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+ -
PO output messages control based on the reason code
HI,
The requirement is to generate the PO output message based on the value of 'Reason for change' code. suppose
Ex:generate the output if the reason code is 2.
I know there is a way to control the message output by defining the 'fields relevant to printout of changes' in SPRO. But we are not going to use this option.
I have to control the output based on the Reason code. Please let me know.
Regards,
NishantHi Nishant,
I will give you another input. This should be your last option. As mentioned above, you need to create an implicit enhancement in the following class method and export the content of the internal table MY_TABLE which contains the current values of the versions.
Class - CL_GRID_VIEW_MM , Method - HANDLE_ON_DATA_CHANGED
Then you import the same in your exit.
Regards,
Abijith -
Requisition Import-Zero interface
Hi,
I already check for details on the Drop Ship Flow in Order Management and I set up as mentioned in the note. But i still can't find the purchase requisition in additional information.
Can anybody suggest? There is no error message in the process messages. However, the requisition import log indicates that no requisitions have been created and gives me the zero number of interface lines in error.
Thanks
PoyHi,
Here is the status below
Status Activity Parent Activity
Notified Ship Ship-Line, Manual
Active Ship-Line,Manual Line Flow -Generic
Complete End Create Supply-Line
Complete End Purchase Release-Line, Defered
Please advise.
Poy -
We have an external system for creating requisitions which is accessed by the requestor. All approved requiistions are uploaded to the Oracle Financial's interface table. The Requisition Import uploads the records from interface table to the appropriate tables. Is there a feature in Oracle Financials that will prevent the buyer to cancel the requisition until the requestor agrees to cancel it?
Check the po_requisition_interface table and po_interface_errors table.
That will give detailed error message.
You can also run Req. interface errors report. http://download.oracle.com/docs/cd/A60725_05/html/comnls/us/po/reqthrz.htm
Common causes are item is not purchasable, item does not have list price.
Hope this helps
Sandeep Gandhi -
Table invoices without output messages
Hi All!
I know that in NAST table I can see the output messages for invoices and from VBRK table I can get all the invoices. But I don't know if there is a table / a field table which tells me if the invoice has not any output message.
I have to create a report with all the invoices for a time period and in this report I should have a field which tells me if the invoice has an RD00 output message.
Any idea about the best solution for this report?
Thank you.
Message was edited by: Florina ChetaHi,
check this out
Message control
Application like PO(purchase order) creation use this technique , where the output type is linked to the application(Message control is a configurable cross application component which can be set in IMG .Such programs are created in the form of function modules and linked to the output type which is linked to the apllication.These have predefined interfaces.
In outbound programs(function module) that use message control the key of the
application document is passed to the function module whcig will read the data from the table depending upon the key passed(NAST structure) and fill the IDOC segemnts with the application data.The control record is also passed to the function module but is not fully filled, the rmaining fields are filled and the control is passed back to the calling program which is RSNASTED and is invoked by the
message control to process ALE and EDI output types and this program on recieving the IDOC data will create the physical IDOC in the system.
The parameteers passed to the function module are
IMPORTING PARAMETERS
OBJECT LIKE NAST
It contains documents key.
CONTROL_RECORD_IN LIKE EDIDC
It contains the partailly filled control record
EXPORETING PARAMETER
OBJECT_TYPE
CONTROL_RECORD_OUT LIKE EDIDC
TABLES
INT_EDID LIKE EDIDD
The internal table used to fill the data records in the same order as they exists in
the IDOC.
The important parameters that should be filled in the custom function module are
CONTROL_RECORD_OUT and INT_EDIDD .The OBJK field of the structue NAST contains the key of the apllication document.
===========================================
Message control and output type. In R/3, message control is a mechanism by which documents are output based on certain selection criteria, requirements, and sequences. Message control determines the type of document, its timing, number, and medium (print, fax, ALE, or EDI.). Outbound messages in SD (Sales and Distribution) and MM (Materials Management, Purchasing) are created and processed by message control records. The output records are stored in the NAST table.
Message control uses the condition technique. The conditions for creating an output message are stored in condition tables that have selection fields picked from a catalog of application fields/tables. To determine if an application document qualifies for output, search strategies are used through access sequences, output procedures, and requirements. Once a message qualifies for output, message control modules use the parameters set in the condition type or output type to determine the timing of transmission and the medium of the message. The output type also specifies the program or module to be invoked to create the output.
Message/output determinations are concepts applicable not only to EDI and ALE, but also to other output mediums.
also check this link...
http://www.erpgenie.com/sapedi/messagecontrol.htm
Feel free to revert back.
--Ragu -
Output message can not be created in a PO
Hi to you all,
Output message can not be created in a PO for a customer. During my tests, the yellow output message was created automatically after I have saved the PO.
I checked ME9F and the table NAST, there is no entry for the PO of the customer. This happens arbitrarily.
Do you know how and why this can happen? Is it a program error or something else?
Thanks.
EsraHi Esra,
if I do understand you correctly, when creating the PO the system always finds a message to be created ("yellow" message). But arbitrarily the message cannot be generated in ME9F, correct?
In my view, if the message is always determined correctly in the PO there cannot be any trouble concerning condition records, the error has to occur later in the process.
Are there any error messages in the processing protocol of a message that cannot be created? What happens if you set the transmission time-spot to 4 (immediatelly)?
Just my 2 cents
Alicia -
Problems with importing text messages from PC Suit...
Problems with importing text messages from PC Suit 7.1.18.0 to my Nokia 5800
I am trying to import a csv file that contains text messages (Note that this file was created using PC Suit 7.1.18.0) to a subfolder that I have created to My Folders but PC Suits only imports the text messages to the Draft folder. Note that initially it shows that the messages are import in the correct folder but after a refresh it shows them in the Draft Folder. Is their any setting that I should change in the PC Suit or the phone? My computer runs on Windows XP Service Pack 3 and the Nokia 5800 was upgraded to the latest firmware v20.0.012
Thanks for your helpMost phones only allows importing of draft and archived box for SMS.
To do a restoring, you need to backup the SMS as a .nbu file using PC Suite and restore later.
If you got an SD card, you can also do a backup on the SD Card (backup.arc) then restore later (reset and restore: backup.arc and mmc).
What's the law of the jungle? -
Hello all,
in a purchase orderI will send out IDOC's. After creating the purchase order a proposal for an output type had been made (checked in analysis, the condition record has been found, but no proposal had been made in the purchase order. After saving the PO there is no record in NAST.
Has somebody an idea?
Regards
Norberthi
You need to do some configuration for this.
u2022 Goto NACE .
u2022 Select EF and click on OUTPUT TYPES.
u2022 Then select Output Type NEU and click on processing routines .
u2022 In that you have to add a new entry - medium 5 .
u2022 Then you need to assign a program, form routine and form.
u2022 You can use the standard program i.e. SAPFM06P, FORM routine is always ENTRY_NEU and standard MEDRUCK.
u2022 Then in PARTNER FUNCTION you need to add a new entry : medium - 5 and function - VN .
u2022 For subject of the mail goto Mail Title and Texts. In title give PO No. &EKKO-EBELN& .
u2022 Under General data -> Replacement of text symbols give programm as SAPMM06E and Form Routine as TEXT_SYMBOL_REPLACE .
u2022 Now the subject will be PO No. 1800004202.
u2022 You need to maintain your email id in tcode SU01 and also the vendor's email id.
u2022 Now while creating a new purchase order , change the medium to External Send .
u2022 Then goto Communication Method and select CS01 . ALSO make sure that the Cover Page Text has value PO No. &EKKO-EBELN& .
u2022 Goto tcode ME9F .
u2022 Execute.
u2022 Select the checkbox and click on Output Message.
u2022 You will get a message MAII 00000000000001 generated .
u2022 Use note no 191470
VB -
Automatic output message generation for PO
Hi Forum,
I am getting below message while creating a PO, I want to set Automatic output message - (my output is by e mail). Please help...!!!
No message generated for output of purchasing document
Message no. 06261
Diagnosis
The system was not able to find a message record via the message determination schema. Therefore it was not possible for such a record to be generated for this purchasing document. In consequence, the purchasing document cannot be outputted (printed or transmitted).
Procedure
The message determination process should be checked and, if necessary, corrected.
The message record can be created manually for this document. For this purpose, choose the function "Messages" in the menu "Header" and maintain the necessary data.
Thanks & Regards,
Rohit GulianiHi Rohit,
You need to check that your print program is SAPFM06P and form as MEDRUCK.
Any testing should be done with this testing and once thus setting works, you may go back to your own program and form if you like. This helps a lot in identifying the area of error.
Please tell me you support pack level for SAP_APPL. It starts with SAPKH***** (like SAPKH46C08).
After that your help can be done.
- Sanjeev -
How to display the Output messages on LabVIEW
Hi,
I'm building a simple user interface on LabVIEW and I have the following question:
- TestStand has an Output Tab where I display some messages using Engine.OutputMessage; How can I do the same thing on my UI?
I've attached a printscreen of my TestStand sequence as an example of what I want do do on LabVIEW.
I apreciate all the help.
Thanks in advance.
Regards,
Daniel Coelho
Daniel Coelho
VISToolkit - http://www.vistoolkit.com - Your Real Virtual Instrument Solution
Controlar - Electronica Industrial e Sistemas, Lda
Attachments:
TS PrintScreen.JPG 137 KBSorry, from your post in the LabVIEW board I did not understand that it was the Output message that you were looking for.
I thought you wanted the results from your test steps displayed on the user interface.
It is the “Output Panel” in the sequence editor that displays your output message, but I do not know if there is default Output panel activeX indicator for user interface that the TestStand engine would update automatically like it does the execution view.
Maybe someone else knows
As also pointed out, the UI messages is your other option.
The Output Message event number is 40
http://zone.ni.com/devzone/cda/epd/p/id/3879
UIMsg_OutputMessages–(Value: 40) TestStand sends this message at periodic intervals when it holds references to output messages that calls to the OutputMessage.Post method queue. TestStand transfers the queued messages to an OutputMessages collection attached to the UIMessage.ActiveXData property for this event. An application that processes output messages should copy the output message references from the collection in UIMessage.ActiveXData to its own private OutputMessages collection by passing its private collection to the OutputMessages.CopyMessagesToCollection method. An application calls the Engine.NewOutputMessages method to create a private OutputMessage collection. TestStand generates this event only if the Engine.OutputMessagesEnabled property is True. Because there can be more than one handler for this event, the application should not modify the OutputMessages collection the UIMessage.ActiveXData property holds.
Omar
Message Edited by OmarGator on 10-09-2008 10:12 AM -
Purchase Requisition Import failing for Dropship orders
Hi,
EBS - 115.10
When dropship order is booked, data is populated into po_requisitions table...After running the import error message says 'Invalid Deliver To Location'.
Which is basically populated from LOCATION_ID of SHIP_TO Site.
DESTINATION_ORGANIATION_ID is populated as Inventory Org
DELIVER_TO_LOCATION_ID IS populated as LOCATION_ID of SHIP_TO Site.
So anything wrong in this. If yes, what needs to be changed?...Please suggestCan you check if it is 'internal location_code' of that inventory instead of customer site location ?
Location_code is from hr_locations, location is from hz_locations.
Maybe you are looking for
-
Mac Mini 2011 headless problems
Hi have Mac Mini alu 2011 not the latest versione with thunderbolt port. I use it as backup server, with no monitor connected. Many application don't work without a monitor connected, anyone have same issues and a solution? Thanks in advance.
-
Oracle Report Server Creation in Forms11g
Dear All I installed oracle forms 11g r2 on windows 7 sp1 64 bit, every thing is okay , forms running without any problem , but i don't know to to run reports and how i can create report server , can any one help me in details ? Thanks in advanced
-
IME, Events OK, Config no workin?!?!
Hi, I've got something weird happening with IME, I've just installed it on a customer server (win2k3), all the services start fine, I can login, add my sensors, view the sesnor health and view all events just fine. As soon as I hit the "configuration
-
Language in setup before windows
hi there, we have recieved a batch of pcs that have the setup/bios menu in german. does anyone know how we can change this to english, please?? any help would be great as my german isnt good at all!!!! the pcs are all HP Pro 3400 MT all with Win 7 x
-
Problem with image Im mobile Display....
hi all .... i m devloping one project in that i a creating one image based on data that comes from database and i want to show that image on jsp .....it is work perfectly in "IE browser" but when the same code i run on blackberry simulator.....it doe