Requisition object not created in eRecruiting system
Dear Experts,
Please help. My eRecruiting system in production is having error at the moment. When recruiter approve Requsition form created by Manager (via MSS), the requisition object is not created in eRecruiting system.
The step by step scenarion:
1. Manager create Requisition Form in MSS - using PDF form.
2. Recruiter receive the form in Universal Work List (UWL) in HR Portal
3. Recruiter approve the form
4. Requisition form should be updated in eRecrutiing system : eRecruiting -> Requisition -> Maintenance, However, the object is not created.
Your help is appreciated!.
-Rahidah-
I have the same problem but the requisition is created in HRP5125 in SAP but does not reflect to portal any help on this will be appreciated.
Thanks,
Sheshu
Similar Messages
-
Purchase requisitions are not created for Component by MRP
Hi,
I have created planned orders for assy. When I run the MRP the purchase requisitions are not created by MRP for the components. If I check the planned order the components tab is showing all the raw materials list as per the BOM. The master data tab shows the BOM,Routing,Production version etc. But when I run the MRP the components planned orders/purchase requisitions are not created. There is no stocks available for the components in the plant, still the purchase requisition are not created by MRP.
I have tried in both transactions MD01 and MD02.
I could notice one thing. Supoose if I enter 31.12.2009 is the order finish date, the system creates exception mesage 10- Rescheduling in with proposed date 01.12.2009. Why the system is propsoing rescheduling in with date 01.12.2009 which past date.
Please sugest.
thanks and regards
MurugesanHi,
I am using MRP type PD for assy and components. There is no planned orders for assy.
If I run MD02 the planned orders created for assy and purchase requisition are created for raw materials. But if I run MRP in MD01 neither the planned orders nor the purchase requisitions created.
I tried the Control keys NETCH,NEUPL but still the planned order and purchase requisitions are not created if I run using MD01.
Please suggest.
thanks and regards
Murugesan -
** File to IDoc scenario - IDoc not created in target system
Hi friends,
We are doing File to IDoc scenario. We made required setting in both application as well as XI system. While test the scenario, the file is picked up and successfully processed in SXMB_MONI, but the inbound IDoc is not created in target system. What could be the problem?
We are using DEBMAS message type DEBMAS06 IDoc type. We checked the following.
1) SM59 - Connections are OK both application and XI system
2) IDX1 - In XI System, we have assigned SAP<R/3> port.
3) IDX2 - IDoc is imported.
4) In ID - Sender File - Business Service - Adapter-Specific Identifier - Logical System name is given.
5) In application system. - Partner Profile maintained correctly.
6) SM58 - There is no error.
So, what could be the reason ?
Kindly reply, friends,
Thanking you.
Kind Regards,
Jeg P.Hi,
Check all the steps ..
File to IDOC
Do these configurations in R/3 and in XI...
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
Thanks,
Satya -
Device object not present,restart the system and run setup again????
i install window xp sp2 in my macbook,when i install driver by mac os cd,installation run until sigmatel,it show error,the my mbp will restart automatically,and the driver installion not complete!! i try to install sigmatel idt sound driver manually,when system update the hardware configuration,it show an error message
" device object not present,restart the system and run setup again"!!!! so i can not fully install bootcamp driver in window!
any can help??
macbook pro 13" 2010 midHi:
Your notebook is not supported by HP for Windows XP.
Please read the XP downgrade guide at the link below for instructions on how to get your audio to work in XP.
http://h30434.www3.hp.com/t5/Notebook-Operating-systems-and/General-XP-Downgrade-Guide-for-HP-Laptop...
The specific instructions for your model series can be found in the section titled 3. Difficult Models
Paul -
Early watch alert task not created on satellite system via SDCCN
The task about EWA is not created on satellite system via SDCCN.
The RFC back was created on Solution Manager and the user assigned to it has the following profiles:
S_CUS_CMP (SAP_S_CUS_CMP) Read data
S_CMSREG (SAP_S_CSMREG) -> Central system repository data
S_BDLSM_READ (SAP_S_BDLSM_READ) -> SDCCN data
SAP_SV_FDB_NOTIF_BC_ADMIN -> Service Desk messages
SAP_SUPPDESK_CREATE -> Service Desk messages
I have checked the RFC authorizations and Connection nothing is wrong.
Do you folks have any clue about that issue?
tks,
ReHello,
Not really much information to go on. The Maintenance package tasks is intended to schedule the Refresh defintion and services SDCCN tasks. So is this tasks scheduled? Is this taks gettign any errors/warnings in the logs?
The EWA task is created when the refresh service task runs and gets a list of the serivce sessions that need to be
populated.
You can run a refresh services task to see if there are any sessions to pull. If ther are no sessions, it could be a problem in SMSY defintions for the system. if the system is not delared 100% correctly in SMSY you will not get an EWA session populated.
In DSWP in the SOlution is the EWA for the SID red flagged? If so this means the data still needs to be colelcted from the satellite/managed sysetm. Does the installation number of the SID match the one in SMSY? If not you willnot get any sessions.
Is the refresh session actually using the *BACK RFC to the intended Solution Manager ssystem and is it defined as the master in SDCCN RFC destinations?
If you go to SE37 and run TH_SERVER and specify the SM_SIDCLNTnnn_BACK RFC, does it pull the server list?
If so your back RFC is functioning properly and a logon is successful.
Are the service defintions being replaced successfully when the Maintenance Package runs? Are they replaced when an upgrade was done? It could be the service defintions need to be replaced.
But really more information is needed. I have covered off just some of the issues possible.
Regards,
Paul -
Manual entries of TDS/TCS deduction not creating Challans in system
Hi All,
We are to pass the entries of TCS (tax collected at source) deduction from sales invoice through FI module. Since it is not possible to deduct the TCS from sales invoice automatically without SD module, we have decided to post the TCS deduction entries manually. But when we are posting these TCS entries manually system is not creating challans for these TCS entries.
Please guide me whether sustem will not create challans for manually decucted TDS / TCS entries?
Thanks in advance
SonalHi,
tcs is not supported totally. u can deduct tcs from customer. for this in wht config setting u can activate wht for customer also from the path given below
SAP Customizing Implementation Guide > Financial Accounting (New) > Withholding Tax > Extended Withholding Tax > Company Code > Assign Withholding Tax Types to Company Codes
Warm Regards -
CUA - Users not created in Central System
Hi - Just put in CUA into a Solution Manager 4.0 client - and have the following issue.
After performing SCUG - the users are brought into the central system BUT not created into the central system.
For example:
Child system is CLNT100
Parent system is CLNT200
In CUA - if I search on the user - I can see it exists in CLNT100, but no entry is created in CLNT200.
This is an issue as I can't use SU10 in CUA - to do mass changes as the users don't exist in this client.
I am pretty experienced with CUA - but have not seen this before - is there some new settitng that I need to make to create the users in the CUA client when performing SCUG?
ThanksHi - you only need to perform SCUG in the central system.
I have brought all the users accross from each child system.
I think I may have incorrectly analysed the error.
What I am trying to do is use SU10 in the Central system to make changes on users in the child systems. Issue is that none of the users that are in the child system only show up in SU10.
I therefore think that this is an issue with SU10 in CUA parent - as it is only picking up uses if they exist in this CUA parent client (i.e. not if they only exist in the child systems)
Is there any way to change the behaviour of SU10? -
RFC not created in receiver system
Hi,
FIile-rfc received in receiver system until yesterday.now the RFC not reaching to receiver system.They are no changes and no change in RFC structure.
all the ques are clear and RFC connectin to the receiver system is alo fine and CC monitoring is also green and in the audit log everything is sucessful.sxmb?moni messages are sucessful.
please let me know where i can check ...
Regards,
hymaDid you see any logs in receiver RFC channel?
Check the receiver service for interface in moni- SOAP header-Main document.
Also check if any conditions are specified in receiver determination. -
Objects not created after the AT USER-COMMAND
Hi experts, gud evening. I'm new to ooabap. in my prog. after the at user-command the objects are not getting created. so i've created even before that. even then i couldn't get that created. so pls help me where the prob. is
Prog :
REPORT yrj_my_oops.
CLASS cl_vbak DEFINITION
CLASS cl_vbak DEFINITION.
PUBLIC SECTION.
METHODS : load_data IMPORTING value(im_kunnr) TYPE vbak-kunnr,
display_head,
write_data.
PROTECTED SECTION.
PRIVATE SECTION.
DATA : it_vbak TYPE TABLE OF vbak,
wa_vbak TYPE vbak.
ENDCLASS. "cl_vbak DEFINITION
DATA : w_vbeln TYPE vbak-vbeln.
CLASS cl_vbap DEFINITION
CLASS cl_vbap DEFINITION.
PUBLIC SECTION.
METHODS : load_data IMPORTING value(im_vbeln) TYPE vbak-vbeln,
write_data.
PROTECTED SECTION.
PRIVATE SECTION.
DATA : it_vbap TYPE TABLE OF vbap,
wa_vbap TYPE vbap.
ENDCLASS. "cl_vbap DEFINITION
CLASS cl_vbap IMPLEMENTATION
CLASS cl_vbap IMPLEMENTATION.
METHOD load_data.
SELECT * FROM vbap INTO TABLE it_vbap WHERE vbeln = w_vbeln.
ENDMETHOD. "load_data
METHOD write_data.
LOOP AT it_vbap INTO wa_vbap.
WRITE : /5 wa_vbap-posnr,
20 wa_vbap-matnr,
35 wa_vbap-arktx,
70 wa_vbap-netpr.
ENDLOOP.
ENDMETHOD. "write_data
ENDCLASS. "cl_vbap IMPLEMENTATION
CLASS cl_vbak IMPLEMENTATION
CLASS cl_vbak IMPLEMENTATION.
METHOD load_data.
SELECT * FROM vbak INTO TABLE it_vbak WHERE kunnr EQ im_kunnr.
ENDMETHOD. "load_data
METHOD display_head.
WRITE : /5 'Order No.',
15 'Order Date',
30 'Net Value'.
ENDMETHOD. "display_head
METHOD write_data.
LOOP AT it_vbak INTO wa_vbak.
WRITE : /5 wa_vbak-vbeln,
15 wa_vbak-audat,
30 wa_vbak-netwr.
ENDLOOP.
ENDMETHOD. "write_data
ENDCLASS. "cl_vbak IMPLEMENTATION
PARAMETERS : p_kunnr TYPE vbak-kunnr.
DATA : o_vbak TYPE REF TO cl_vbak,
o_vbap TYPE REF TO cl_vbap.
START-OF-SELECTION.
SET PF-STATUS : 'YRJ_MY_OOPS'.
CREATE OBJECT o_vbak.
CREATE OBJECT o_vbap.
CALL METHOD o_vbak->load_data
EXPORTING
im_kunnr = p_kunnr.
CALL METHOD o_vbak->display_head.
CALL METHOD o_vbak->write_data.
AT USER-COMMAND.
w_vbeln = sy-lisel+4(10).
CASE sy-ucomm.
WHEN 'BACK' or 'EXIT'.
LEAVE LIST-PROCESSING.
WHEN 'ITEM'.
CREATE OBJECT o_vbap.
CALL METHOD o_vbap->load_data
EXPORTING
im_vbeln = w_vbeln.
CALL METHOD o_vbap->write_data.
WHEN OTHERS.
ENDCASE.Hi,
I dont see any problem with you code. I ran your code in my system and worked fine. Except for one thing that is you need to do a conversion exit on the w_vbeln before selecting data from VBAP in method load data. This is because when you ouput the data, the VBELN is converted to external format and thus needs to be converted to internal format if you want to do further selects based on it.
CLASS cl_vbap IMPLEMENTATION.
METHOD load_data.
" Add this , so it converts the VBELN to internal format.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = w_vbeln
IMPORTING
output = w_vbeln.
SELECT * FROM vbap INTO TABLE it_vbap WHERE vbeln = w_vbeln.
ENDMETHOD. "load_data
METHOD write_data.
LOOP AT it_vbap INTO wa_vbap.
WRITE : /5 wa_vbap-posnr,
20 wa_vbap-matnr,
35 wa_vbap-arktx,
70 wa_vbap-netpr.
ENDLOOP.
ENDMETHOD. "write_data
regards,
Advait -
ERecruiting - Extended Requisition Workflow created object not found
Hello All,
I am using Workflow WS16900010 (MSS - eRecruiting Scenario) for raising an extended requisition request. While this workflow has executed to success, I am not able to identify the requisition object (NB) which has been created as a result of this workflow. How does the recruiter fill in this requisition object and release it for the manager to be able to do candidate assessment.
Kindly help!
Thanks,
Uthra KJHi SDN users,
Me too facing this issues, by using WF16900009, WF16900010. The workflows as well as notifications are completed and the requisition notification status is displayed in the Status Overview iView. Unfortunatelly no NB (Requisition) object is created in table HRP5125, nor in the recruiter maintenance page for requisitioins.
We're running both ERP HR and E-Recruiting on the same system.
ERP2005 EA-HR 600 SP23 adn ERECRUIT 600 SP11.
Pls help me as the issue urgent.
Thanks & Regards,
Sudheer Kumar P. -
Device Object not present.....
I have a Dell computer. Each time I clean installed a new Win 10 TP build, I had to reinstall SigmaTel HD Audio.
I did that many times and it never failed, until today.
Today, I did a clean install of 9926 in a dual boot setup, and as expected I had no sound. So, I started to install sigmatel.
Near the end of the install, I got this error message.....Exit Error: Error=Device Object not present, restart the system and run setup again.
I restarted, it still failed to install. I gave up after the 4th restart. So, as of now, I have no sound.
Other than that, 9926 runs fine.
Anyone has an idea ?Hi david,
From the error message, it seems Windows could not detect the Device object successfully.
How did the sound Device configure here?
Next time if this device still encounter issues, check it in Device Manager.
Edit: I marked your reply as closed.
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Sapdata3 has been not created after Sap Neatweaver 7.3
Hi Gurus,
I have done the installation for SAP Netweaver 7.3 Java stack with distributed option with oracle database .
However file system created is sapdata1,sapdata2 , and sapdata4 has been created but sapdata3 is not created .
can any one susggest.
Regards,
JeetendraHi Jeetendra,
Check whether you system is up and running ?
If yes, then sapdata3 is a folder created under /oracle/SID or /oracle based on your file system structure.
As right mentioned SAP installer will not create any file system. If file system /oracle/SID/sapdata3 is not available, SAP installer will create a folder sapdata3 under /oracle/SID and respective data files will be created under the same.
Hope this helps.
Regards,
Deepak Kori -
Error while creating Vacancy requisition object (NB) after upgrading EHP4
Hi All,
We had alreay E-Rec system with EHP2 and using last 1 year. Now based on Client requirement, we have upgrdaed to EHP4. After completing EHP4 upgradation, we are getting error while creating vacancy requisition object after all level of approval.
Can any body help how to resolve this issue?
Thanks in advance.
Regards,
SreelathaHi
Hope SAP Note 1241014 will be useful to you.
Best Regards
Reddy -
MSS Requisitions is not moving to Recruiter's POWL and system is throwing the errors.
Hi everyone,
Hope all are doing in good spirit.
I have an issue in regards with Requisition Creation and its related process.
I am working in Standalone architecture where Recruiting server is in another instance apart from HR system.
We are using WS45600028 standard workflow.
When Manager submits the Requisition to higher level manager to approve, its done successfully and the notification is going to the Manager. But after approval, Requisition is not going to Requiter's POWL queries.
I have maintained Support Group, Lead Recruiter in it and assigned this to Requisition.
I have checked HRP5131 table. But there is no SOBID which sould be flaged as Lead Recruiter.
When Higher level Manager approves the Requisition, It is successful bu there is an error in slg1.
Error: Error when ending the Work item 0000007704 in HR system.
The system returned the call of interface SAP_WAPI_WRITE_CONTAINER in this context
System Response:
Call ended with an error. The function was not executed.
Procedure: Remove call.
At the same system is throwing the error for the User (This user is used for RFC creation using with transaction SM59): No candidate for this User.
Details of error: The error occurred in program CL_HRRCF_CANDIDATE_ADMIN_BL===CM00B line 77
Procedure for system administration:
Check the context in which the error occurs.
Since it it probably program error and not an input error, you should contact SAP.
Can you please look into the above issue and address me if you have any solution for the same.
Any help would be greatly appreciated.
Thank you.
Regards,
SekharHi Nicloe,
Thank you very much for your response.
I have done the data transfer from HR system to E-Rec system through ALE iDoc using PFAL.
All the is transferred and corresponding NA, CP, BP generated in E-Rec for P.
All the users(Recruiter, Managers and Recruiting Admin) data have transferred to E-Rec System.
But when Manager is creating the Requisition Request, it going to his higher level manager for approval and its been approved successfully. Later it is not updating the Recruiter's POWL.
In DB table HRP5125 Requisition data is created but with only few details like Start and End date, Object ID. in E-Rec system.
In HRP5131, NB related data is there but there is no SOBID for lead Recruiter.
Immediately i am getting errors in both HR and E-Rec systems as follows after the Requisition got approved.
In HR system, Error when ending the Work item 0000007704. Workflow completed successfully but still here is an error.
In E-Rec systemThe error occurred in program CL_HRRCF_CANDIDATE_ADMIN_BL===CM00B line 77.
And system says, Since it it probably program error and not an input error, you should contact SAP.
I heard that there might be an inconsistency in NA, BP, CP when we do PFAL transaction for data transfers. Can you suggest me to raise SAP ticket in this context?
Or Did i miss any configuration in this connection?
What can be done now to fix this? I am working EHP 5 and SP level is 11.
Can you please let me know. Kindly help me out of it as i am struck with this since very long time.
Thank you.
Regards,
Sekhar -
Interval 01 was not created for number range object HRTEM_REFN
Dear expert!
Now, I'm getting some issues in Training and event management module.
- The first, I created business event
- Second, I process to book for business event by tcode: PSV1 --> book --> book/payment info --> activity allocation.
But when I was booking, the system displayed error: "Interval 01 was not created for number range object HRTEM_REFN"
Help me, please!
Best regards, Huy!Go to the customization as below
Training and event mgt>Basic settings>Number range maintanence>Define number ranges for External operation
and maintain number ranges as 01 Internal
Hope ur problem will solve
with regards
partha
Maybe you are looking for
-
Running a batch file inside a jar
HI all I created a jar file , in which i need to run a batch file , so i wrote a main class to execute the run the batch file , but when iam running the jar it is searching for the given batch file out side the jar. my code is some thing like below
-
Okay, so I did the entire Migrate Assistant process to transfer all my files and what not to my MacBook. Problem is that I did it on seperate occasions and now I have several accounts. How can I transfer my files from the other accounts to my primary
-
In Mail, how do I open my address book
I have no idea how to open my address book.
-
Just installed 10.0.8? Check Software Update for updated QT codecs
New ProApps Quicktime codecs [1.0.2] This update adds the following video codecs for use by QuickTime-based applications: Apple Intermediate Codec Apple ProRes AVC-Intra DVCPRO HD HDV XDCAM HD / EX / HD422 MPEG IMX Uncompressed 4:2:2 XAVC This update
-
XMP sidecar files not recognised
I am new to Lightroom and want to migrate an Expression Media catalog to a LR catalog. The import worked OK for the images (raw/Nef, Tiff, jpeg) , but I have a problem with the IPCT medata ( so far I use only : title, rating, country, copyright). I d