Rerouting bounce messages via ldap query inpossible?

Hi,
using C650 with 6.4.0-273
I have defined a private listener. For internal domains I have domains assigned routing with a ldap query. It resolves to mailLocalAddress.
ok
If I get a non delivery notification (hard bounce) so this messages is routed via a SMTP route, no ldap query is done.
We have used SMTP routes before changing now to ldap based routing on private and public listeners. All E-Mails are routed successfully except non delivery notifications.
If I delete the SMTP route (for my internal mail domain) NDN is deliverd via public listener (MX lookup, not necessary at the same IronPort in case of multiple MX records).
Any way to have the same (ldap based routing) for both normal messages and non delivery messages?
Burckhard

As a workaround, you may route all NDN's to another IronPort Private listener (using smtp route) so that they are again pass thru ldap.routing

Similar Messages

  • Bounce messages via another smarthost

    Hello,
    We are using SunOne iPlanet Messaging Server 5.2 HotFix 1.07. Messages which have been created by Messenger Express (webmail) are send through localhost which does some rewriting to the with the from address and passes them on to a MTA with an Virusscanner. Since this is a large site a lot of messages are bouncing because of over quota mailboxes. These messages do not need to be scanned from viri and should therefore be send through a non virusscanning MTA.
    The notices should be sent through another MTA. How do I set this up using channels and so on?
    Regards,
    Bert

    Hello,
    We are using SunOne iPlanet Messaging Server 5.2
    HotFix 1.07. Messages which have been created by
    Messenger Express (webmail) are send through
    localhost which does some rewriting to the with the
    from address and passes them on to a MTA with an
    Virusscanner. Since this is a large site a lot of
    messages are bouncing because of over quota
    mailboxes. These messages do not need to be scanned
    from viri and should therefore be send through a non
    virusscanning MTA.
    The notices should be sent through another MTA. How
    do I set this up using channels and so on?
    Regards,
    BertI don't know of any easy way to pull specific "bounce" messages, and route them differently. If you have so many over-quota users that this truly affects your throughput, I suspect you have other issues that are more important. . . .

  • Viewing complete xml messages via db query

    Hi
    Is it possible to view the complete xml message in bpel 11g via a db query which we see from em console opening a instance every time ?
    Thanks & Regards,
    Neeraj

    Hi,
    im familiar with that post and looked it through before posting here. Seems like Nordebrink had problems when sending too many DX_REQUEST xml tags. WE on the otherhand are sending none at all.
    as you can see from the logs i posted the xml-string sent to sap me via http is this:
    sun.net.www.protocol.http.HttpURLConnection:http://172.17.120.220:50000/manufacturing-xml/com/sap/me/integration/xchange/client/ProductionInterface.jsp?site=TEST3&login=XML&password=password?message=<PRODUCTION_REQUEST><PARAMETRIC><SITE>TEST3</SITE><SFC>EE110614146641</SFC><TYPE>MANUAL</TYPE><RESOURCE>AOI001</RESOURCE><PROGRAM_ID>6374-TOPPOWER</PROGRAM_ID><PROGRAM_REV>1</PROGRAM_REV><USER>XML</USER><TEST_STATUS>pass</TEST_STATUS></PARAMETRIC></PRODUCTION_REQUEST>
    now, this string works without authentication in the admin-xml interface, but not via http in a browser.
    so your suggestion is to create a ticket for this?

  • Some emails are not delivered, also not in LOG, no Bounce message

    I am Using Mountain lion server with the server app installed.
    Not the strange thing is that a lot email is not delevered to my email clients, but some are.
    The email that is having problems is [email protected]
    Does anybody know how to debug where the email is, that is not deliverd?
    Let me explain a strange situation.
    When I sent a mail true wetransfer.com from [email protected] to [email protected].
    I recieve the message on info@, that is is successfull delevered at test@..  but never recieve the mail at [email protected]
    Here a part of the logs:
    2E673904CBB: message-id=<[email protected]>
    Jan  5 15:27:52 server.mydomain.nl postfix/qmgr[4178]: 2E673904CBB: from=<[email protected]>, size=18104, nrcpt=1 (queue active)
    Jan  5 15:27:52 server.mydomain.nl postfix/smtpd[4224]: connect from localhost[127.0.0.1]
    Jan  5 15:27:52 server.mydomain.nl postfix/smtpd[4224]: AB6E8904CD0: client=localhost[127.0.0.1]
    Jan  5 15:27:52 server.mydomain.nl postfix/cleanup[4221]: sacl_check: mbr_user_name_to_uuid([email protected]) failed: No such file or directory
    Jan  5 15:27:52 server.mydomain.nl postfix/cleanup[4221]: AB6E8904CD0: message-id=<[email protected]>
    Jan  5 15:27:52 server.mydomain.nl postfix/qmgr[4178]: AB6E8904CD0: from=<[email protected]>, size=18770, nrcpt=1 (queue active)
    Jan  5 15:27:52 server.mydomain.nl postfix/smtp[4222]: 2E673904CBB: to=<[email protected]>, relay=127.0.0.1[127.0.0.1]:10024, delay=0.64, delays=0.43/0.01/0.01/0.19, dsn=2.0.0, status=sent (250 2.0.0 from MTA(smtp:[127.0.0.1]:10025): 250 2.0.0 Ok: queued as AB6E8904CD0)
    Jan  5 15:27:52 server.mydomain.nl postfix/qmgr[4178]: 2E673904CBB: removed
    Jan  5 15:27:52 server.mydomain.nl postfix/pipe[4227]: AB6E8904CD0: to=<[email protected]>, orig_to=<[email protected]>, relay=dovecot, delay=0.16, delays=0.04/0.01/0/0.11, dsn=2.0.0, status=sent (delivered via dovecot service)
    Also some other people are trying to mail me on test@. But I dont see the any message recieving in the logs, and also no bounce message is there.
    Hope somebody can help me with this, since I have lost a lot email from now.

    Dear pterobyte,
    Thank you very much for you help.
    I indeed use a filesending service for testing, and agree that thats not the best way to test, but it was a way.
    Since most email are delivered it is hard to test when it is going wrong.
    Its a good change that it has to do with the DNS.
    Does anybody know how to test if DNS is installed proper? I did install a default MLS installation.
    What I see is that there is one issue with my reversed DNS.
    When I type in terminal:
    Host server.crypton.nl,
    I get my IP, but when I type:
    Host 83.2.97.95
    I don't see my server host but the one from my ISP.
    83.2.97.95.in-addr.arpa domain name pointer 095-097-002-083.static.chello.nl.
    Not
    83.2.97.95.in-addr.arpa domain name pointer 095-097-002-083.server.crypton.nl
    Might that be the problem?
    Since you mention it can it has to do with the DNS.
    Since it is all default, i dont know what is wrong with it.
    Kind regards,
    Flip

  • Never include orig. message into bounce message/DSN

    Hi all
    How can i configure IronPort to never include the original message body into bounce messages or DSNs?
    I would like to always include header information (sender, receipient, subject) of the original mail, but never body information or even attachments?
    I already tried cli-command bounceconfig, an set max_bounce_copy=1, but then the header is also not included...?
    Any ideas?
    Thanks
    Chris

    Hi Chris,
    This one is a bit tricky. The RFC does not state that one "MUST" include a copy of the original message however we do as in general its good practice and it is seen as a courtesy to the recipient.
    That being said you may be able to eliminate most of the original message. You were on the right track with that option but I think you were looking for size not number of copies.
    You will need to make this modification via the CLI using the command bounceconfig. Depending on the number of bounce profiles you have you may need to edit each to achive the desired results. By default there is only 1 profile listed as default.
    The value you want ot chage is the following;
    Please enter the maximum size of the original message (in bytes) to include in the bounced notification message.
    [10240]>
    You may have to make changes and test to get the exact results your looking for.
    murf.run> bounceconfig
    Current bounce profiles:
    1. Default
    Choose the operation you want to perform:
    - NEW - Create a new profile.
    - EDIT - Modify a profile.
    []> edit
    Please enter the number of the profile to edit:
    []> 1
    Please enter the maximum number of retries.
    [100]>
    Please enter the maximum number of seconds a message may stay in the queue before being hard bounced.
    [259200]>
    Please enter the initial number of seconds to wait before retrying a message.
    [60]>
    Please enter the maximum number of seconds to wait before retrying a message.
    [3600]>
    Do you want a message sent for each hard bounce? [Y]>
    Do you want bounce messages to use the DSN message format? [Y]>
    Enter the subject to use:
    [Delivery Status Notification (Failure)]>
    Do you want to parse the DSN "Status" field received from bounce responses to include in the DSN generated by the appliance? [N]>
    If a message is undeliverable after some interval, do you want to send a delay warning message? [N]>
    Do you want hard bounce messages sent to an alternate address, instead of the sender? [N]>
    Do you want bounce messages to be signed (Yes/No)?  [N]>
    Please enter the initial number of seconds to wait before retrying a host that is unreachable.
    [60]>
    Please enter the maximum number of seconds to wait before retrying a host that is unreachable.
    [3600]>
    Please enter the maximum size of the original message (in bytes) to include in the bounced notification message.
    [10240]> 10
    Current bounce profiles:
    1. Default
    Choose the operation you want to perform:
    - NEW - Create a new profile.
    - EDIT - Modify a profile.
    []>
    smurf.run> commit
    Christopher C Smith
    CSE
    Cisco IronPort Customer Support

  • FAQ: BC-LDAP-USR (Directory Interface for User Management via LDAP )

    Version: 20060317
    Q: Where can i find more information to the BC-LDAP-USR interface ?
    A: Have a look on our ICC webpage in the SDN:
    SAP NetWeaver AS - Directory Interface for User Management via LDAP (BC-LDAP-USR)[1] [original link is broken]
    Q: What costs a arising when we want our product to be certified ?
    A: See also our SDN page under the headline "Price List".
    Q: Is there a link/page for the already certified products for this interface ?
    A: Sure, have a look on our ICC page under the headline "Certified Solutions"
    Q: Who can we ask in case of general question ?
    A: Have a look at our general ICC forum:
    SAP Integration and Certification Center (SAP ICC)
    Of course, if you have urgent requests you can send them also directly to our local ICC's:
    ICC Walldorf in Germany: [email protected]
    ICC Palo Alto in USA: [email protected]
    ICC Bangalore in India: [email protected]
    Q: Who can we ask in case of technical questions ?
    A: This depends on the state of your certification project.
    1.) If the certification contracts have been signed then you can ask in this forum and if this does not solve your question go back to your assigned integration consultant.
    2.) When the certification contracts have not been signed then you can ask questions in this forum.

    I distinguish it using the passwordExpirationTime(or something like that, i don't have code here with me).
    This is possible if after password is expired user has at least one more access.It is a user policy that can be set in the Ldap server.
    If it is possible, user can still login and perform operations.You chan search the passwordExpirationTime attribute and determine if password is expired, and the send a message to the user, telling him to change it.(If only one access is allowed and you change the password with the same application or service then do not close context, else you should not be able to connect again.) Instead, if you use an external script, then the last acces should not give you problems.
    Hope i made myself clear.

  • Determining if a user is disabled in OD using LDAP query

    Hello all,
    I'm doing a LDAP query against my OD to make a web-based user directory. I'm using PHP and doing a LDAP search against 10.6 Server OD such as this:
    $sr=ldap_search($ds, "cn=users,dc=my_server,dc=private", "(CN=*)");
    The search is working perfectly, and I'm getting an array result with multiple key/values such as:
    objectclass
    uidnumber
    apple-generateduid
    apple-mcxflags
    loginshell
    etc.......
    Since it's a listing of active employees, I want to identify deactivated ones and filter them out of my listing. However, I can't see any key/values that could tell me if a user is deactivated or not.
    What would be the best way? Must I run a command line to see if a user is disabled, and if so, what command? (However, this would be poor on performance...)
    Thanks.

    I looked into this ages ago here:
    https://discussions.apple.com/message/6595575#6595575
    This information was relevant back in 10.4 which was post NetInfo.  All things being equal, this is likely still the case.  However, this may have changed and I apologize in advance for not validating.

  • Getting an odd bounce message

    Yesterday I began to get the identical bounce message no matter who I sent an email to. I even tried it on a two other personal accounts that I control and got the same message. Is anyone else seeing it? Is it real or random? The emails are being received despite the bounce message. My isp is Road Runner and they were sent from my me.com address.
    Your message cannot be delivered to the following recipients:
    Recipient address: REDACTED FOR PRIVACY
    Reason: Rejection greeting returned by server.
    Diagnostic code: smtp;554-mailmx.sarcom.com Your access to this mail system has been rejected due to the sending MTA's poor reputation. If you believe that this failure is in error, please contact the intended recipient via alternate means.
    Remote system: dns;mailmx.sarcom.com (TCP|17.158.161.5|35159|208.65.135.12|25) (mailmx.sarcom.com)
    Original-envelope-id: [email protected]
    Reporting-MTA: dns;nk11p00mm-asmtp006.mac.com (tcp-daemon)
    Arrival-date: Mon, 18 Mar 2013 02:56:07 +0000 (GMT)

    Diagnostic code: smtp;554-p3pismtp01-052.prod.phx3.secureserver.net Your access to this mail system has been rejected due to the sending MTA's poor reputation. If you believe that this failure is in error, please contact the intended recipient via alternate means.
    Remote system: dns;smtp.secureserver.net (TCP|17.172.81.0|46952|72.167.238.201|25) (p3pismtp01-052.prod.phx3.secureserver.net)
    and
    Reason: Rejection greeting returned by server.
    Diagnostic code: smtp;554 p3plibsmtp01-05.prod.phx3.secureserver.net bizsmtp Connection refused. IB111
    Remote system: dns;smtp.secureserver.net (TCP|17.172.81.3|52528|72.167.238.29|25) (p3plibsmtp01-05.prod.phx3.secureserver.net bizsmtp Connection refused. IB111)
    Same message same recipient, two different rejections minutes apart.

  • Authenticate via LDAP - 2 diffrent "LDAP DN Strings"

    Hello!
    My Application gives access to users via LDAP.
    I want to give access to users located in 2 diffrent LDAP - Objects.
    Can anyone help me to solve the problem?
    Regards
    Michael

    My idea was to create a function that calls 2 times function authenticate (http://www.oracle.com/technology/products/database/application_express/howtos/how_to_ldap_authenticate.html)
    like this:
    create or replace function "AUTHENTICATE_AD"
    (p_uname in VARCHAR2, p_password in VARCHAR2)
    return BOOLEAN
    is
    begin
    RETURN(authenticate(LDAP_DN_STRING1, P_PASSWORD,LDAP HOST,LDAP PORT))
    OR
    (authenticate(LDAP_DN_STRING1, P_PASSWORD,LDAP HOST,LDAP PORT))
    end;
    Help of Fiel "Authentication Function" says:
    "[...]The Application Express engine expects this function to have the signature (p_username in varchar2, p_password in varchar2) return boolean. The value of the username and password fields passed to the login API, which is called by the login page, will be passed to your function. [...]
    When I insert AUTHENTICATE_AD into "Authentication Function" and try to logon an error message diplayed :
    ORA-06550: Zeile 2, Spalte 1: PLS-00306: Falsche Anzahl oder Typen von Argumenten in Aufruf von 'AUTHENTICATE_AD' ORA-06550: Zeile 2, Spalte 1: PL/SQL: Statement ignored
    I don't know which arguments are given!

  • Lumia .sms (text messages) via pc?

    hi all,
    its probably not the first one about this, but is there a way to send type sms messages via PC? i love my lumia 920 but if i had known in advance that pc suite would not work anymore this would affected my choice... its a feature i used allllot.... to understate it.
    are there no options to make this work or any alternatives?
    microsoft used to have a tool for this but it doesnt work with a lumia either,
    i thought you could run it via outlook2010 but then udd need to build a exchange server on the lumia... seems all a bit over the top. i wish you would kept the pc suite support...

    The operating system on the Lumia 920 is under Microsofts control, that is why it does not work with PC Suite. Microsoft hasn't added the option in the OS to do what you are wanting so at the moment it is not possible.
    You can suggest the feature to Microsoft here: http://windowsphone.uservoice.com/forums/101801-fe​ature-suggestions

  • Data loaded to Power Pivot via Power Query is not yet supported in SSAS Tabular Cube

    Hello, I'm trying to create a SSAS Tabular cube from a data loaded to Power Pivot via Power Query (SAP BOBJ connector) but looks like is not yet supported.
    Any one tried this before? any workaround that make sense?
    The final goal is pull data from SAP BW, BO Universe (using PowerQuery) and be able to create a SSAS Tabular cube.
    Thanks in advance
    Sebastian

    Sebastian, 
    Depending on the size of the data from Analysis Services, one work around could be to import the data into into Excel and then make an Excel table and then use the Excel table as a data source. 
    Reeves
    Denver, CO

  • How to send error message via a mail to the customers email id

    HI experts ,
    i have a requirement,In idoc where i have to send the error message via email to a perticular emailid?
    please help me n tell also which fm is used for that?
    Thanks
    RAhul Sisodia

    Hi ,
    Check this Link..
    [sending an email with multiple attachments;
    Regards,
    Sachin M M

  • Creating service desk message via web interface

    Hi
    I have setup the servie desk and use the incident management workcenter to view the messages. In that workcenter there is a link that allows one to create a message via a web interface. When that webpage opens there are 3 tabs. The first tab is your Problem discription tab the second one is Additional Information tab. In that tab there are 3 choices Solution, Project and Process. When i select a project and then go to the process tab i dont see any process there (i assume these are business process for the project that was choosen). Does any one have additional information regards this functionality.

    Problem solved

  • I am unable to recieve media messages via text message and the profile says its not verified. How do i fix this?

    i am unable to recieve media messages via text message and the profile in the settings says its not verified. How do i fix this?

    MMS is a carrier feature.  Contact the carrier to ensure you account is provisioned correctly.

  • How to forward sms messages via email with date and contact received info

    Does anyone know how to forward sms messages via email with date and contact received info.
    Currently when I forward only the body copy of the sms message is sent in the email.

    This is not currently possible. Sorry.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for