Rerun f.5d & f.5e

hi,
Is it possible to rerun f.4d and f.5e.
govind.

SAPF180S allows to undo the most recent SAPF180 run.
Note 73472 describes list of standard SAPF180* related reports.
Regards, Kyoko

Similar Messages

Failed installation: How to rerun Adobe Application Manager updates for Photoshop CS6

Hi.
The installation of Adobe Extension Manager CS6 failed - while 2 others update for Photoshop CS6 did intall. I was installing Adobe Reader X .
That's why I discovered the notication from the application manager about updates for CS6 - and I just confirmed that as well.
Apparently the Reader installation blocked only the update installation of Adobe Extension Manager CS6 - saying another installation process was running ... such stuff happens sometimes.
However, it seems Adobes Application Manager update module does not track its failed installations? It does not automatically advertise that update has not been installed and notifiying me again to install it. At least not immediately ...
So how do I rerun the Adobe Application Manager update moduel to check for updates manually?

You go Photoshop CS6 > Help > Updates ...

Statistic report with figures that will not change when rerun months later

Hi,
Is there any good practices that we can follow to create statistic reports with figures that will not change even when rerun after few months later?
My scenario is my statistic report is generated based on data that is "alive" which means the record will get change after a period of time. So, if you generate the statistic report in for January 2006 in the month of January and regenerate in May for the January 2006 statistic, the figure is different. But what I want is to be able to get the same figures.
I know in this case looks like we need some sort of summary tables, so posting this to get advice on the best way to design such summary tables. Please comment if there is other ways of doing it.
Summary tables may work for statistic report, but how to support detail report listing where the records are required to be the same when it was generated few months ago.
Please advise.
Thank you.

What happens, when you execute a report today is the following: a select statement is fired at the data base and the result set is displayed in the report. The data can change after the moment you launched your report. What you could do to keep the result set the same, is implementing a user parameter that fills your date discriminator.

Rerun a step in a chain

i want to rerun a step after it was marked as failed.
if step 1 failed notify the dba and invoke step 1 again else invoke step 2.
i wrote the folowing :
DBMS_SCHEDULER.DEFINE_CHAIN_STEP(
chain_name => 'reports.some_chain',
step_name => 'step_1' ,
program_name => 'do_something1');
DBMS_SCHEDULER.DEFINE_CHAIN_STEP(
chain_name => 'reports.some_chain',
step_name => 'step_2' ,
program_name => 'do_something_else');
DBMS_SCHEDULER.DEFINE_CHAIN_STEP(
chain_name => 'reports.some_chain',
step_name => 'step_fail' ,
program_name => 'notify_dba');
DBMS_SCHEDULER.DEFINE_CHAIN_RULE (
chain_name => 'reports.some_chain',
condition => 'step_1 SUCCEEDED',
action => 'START step_2',
rule_name => 'step_1_success'
DBMS_SCHEDULER.DEFINE_CHAIN_RULE (
chain_name => 'reports.some_chain',
condition => 'step_2 SUCCEEDED',
action => 'END',
rule_name => 'step_2_success'
DBMS_SCHEDULER.DEFINE_CHAIN_RULE (
chain_name => 'reports.some_chain',
condition => 'step_1 FAILED',
action => 'START step_fail',
rule_name => 'step_1_failed'
DBMS_SCHEDULER.DEFINE_CHAIN_RULE (
chain_name => 'reports.some_chain',
condition => 'step_fail COMPLETED',
action => 'START step_1',
rule_name => 'step_retry_step_1'
this works fine if step 1 ends successfuly. when step 1 failes and "step_fail" is triggered, step 1 is not being executed again. i cant understand why.
i would also like to know how to use the syntax for 'AFTER X SECONDS START step'.
thanks !

Hi,
The reason this doesn't work is that once step1 has is in a completed state the rules will not let it run again.
There is a way to get around this though. In your step_fail program you can set step1 to be not_started yet or you can set step1 to start immediately by directly modifying the running chain e.g.
exec dbms_scheduler.alter_running_chain('chainjob1','step1', 'state', 'RUNNING')
or
exec dbms_scheduler.alter_running_chain('chainjob1','step1', 'state', 'NOT_STARTED')
both of these will run step1 again.
Your notify_dba program can be modified to take the step_name as one of the arguments (define_metadata_argument job subname) so it will know which step failed.
Hope this helps,
Ravi.

Distinguishing First Run and Rerun for DVR Recording

If you want to record a series, not just a single show, the only choice you have is to record BOTH First-Run episodes AND Reruns. I note that Direct TV users and TiVo users have a choice when recording a series by selecting First Run Only or First Run and Repeats. Without this discriminate, shows that repeat habitually throughout the day and week are recorded. This is a major inconvenience if your recording are almost exclusively series TV shows. It becomes very inconvenient for series broadcast on HBO, where throught the week multiple series and reruns--for example Boardwalk Empire--are all playing in a single week. The lack of this feature--that other services already have--is a major shortcoming.

Something odd there. Which DVR model?
Should be press DVR button scrool to manage series recordings, press right, scroll to show, press ok, (options including change priority, modify series and cancel series. Modify Series. press ok. Options on that include episodes (first run only/first run and repeats). Scroll to episodes, press enter, change as desired, press ok, push right to save, press ok. close menus, may have to do repeated exits.
You may also want to find the dvr settings to set your default options for creating series recordings. menu/settings/system/dvr/default series options

Check program and rerun

Hi Experts,
When i am trying to load hierarchies using the process chain.iam receiving the error like"check progarm and rerun".
could any one suggest me the solution?
Thanks in advance.
Regards,
Srini.

Hi,
I think you have some design problem in Process Chain. Try to fix it and run.
Hope This Helps,
Regards,
rik.

OK to Rerun FAGLF101 for the Same Period?

We run FAGLF101 every month in order to account for reconcilation account and trading partner changes. My actual situation is a bit more complicated, but let's say that I just discovered a large number of customers with incorrect recon accounts that were first used in November. If we correct them now and rerun FAGLF101 for November, will it duplicate the entries made on the previous run or only make postings for the new customer changes? Grateful for any advice.
P.S. We do not have a handle on the exact customers that have changed so running for just the changed customers is not practical as we have numerous companies and it would take a huge amount of effort to identify a list for each company.

hi,
sap gurus,
good evening toall,
r u sure that with one transaction code my work gets complete.
plz confirm
regards,
balaji.t
09990019711

Rerun Web Service Task whenever it fails

Hi All,
In one of my package i m using web service task and it is failing everytime. Below is the error:
An error occurred with the following error message: "Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebserviceTaskException: The Web Service threw an error during method execution. The error is: The operation has timed out.
   at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebMethodInvokerProxy.InvokeMethod(DTSWebMethodInfo methodInfo, String serviceName, Object connection)
   at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTaskUtil.Invoke(DTSWebMethodInfo methodInfo, String serviceName, Object connection, VariableDispenser taskVariableDispenser)
   at Microsoft.SqlServer.Dts.Tasks.WebServiceTask.WebServiceTask.executeThread()".
I referred the below blog and tried to implement it in my project.
http://microsoft-ssis.blogspot.com/2014/06/retry-task-on-failure.html
In For Loop Container, when i am using the below expression , the container is running but web service task is not running.
EvalExpression - @RetryCounter<=@RetryMax && @QuitForLoop==false
but when i change the expression to
@RetryCounter<5, the web service task is also running.
where i am going wrong. are we not supposed to use expression like @RetryCounter<=@RetryMax && @QuitForLoop==false in For Loop Container.

Read the comments below, you need to reset the QuitForLoop, perhaps this is the issue.
I would approach the issue with Checkpoints, and restart on failure as in
https://www.simple-talk.com/sql/sql-tools/implementing-checkpoints-in-an-ssis-package/ or
https://sqlserverrider.wordpress.com/2011/09/24/rerun-ssis-package-with-checkpoints/
Arthur
MyBlog
Twitter

Report rerunning

Hi everyone,
I have a problem with generating the delimited output. It runs the report again and it takes a lot of time. Does anyone know how to generate to a delimited file without rerunning the report again
null

Make sure you're using the latest SP:
https://smpdl.sap-ag.de/~sapidp/012002523100009038092009E/cr2008win_sp2.exe
Consider adding latest FP also:
https://smpdl.sap-ag.de/~sapidp/012002523100001024152010E/cr2008_fp24.zip
Make sure you are disposing of the report object once you are done with it and before you re-run it with new parameters (.close, .dispose).
Test without the combo box. Let the report prompt. Can you reproduce the behavior now? If not, try to supply the parameter values via a text box. Can you reproduce the issue now? E.g.; is it the combo box that is the issue, or the report?
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

What's the best way to give a user the option of stopping a vi or rerunning it? I wrote something that works but I imagine it's not the best way to do it.

I have a VI that runs a stepper motor then stops. I wanted the operator to have the option of rerunning the VI or stopping it completely. To do this I added a while loop around the entire VI.I have an example VI showing how I accomplished this, but I'm sure there's a more efficient approach. Any suggestions?
Thank you.
Solved!
Go to Solution.
Attachments:
EX 1.vi ‏13 KB

There is almost never a good reason to use the Stop Sign Abort Execution function.
Your while loop is fine. What you really want to do is make a state machine that has at least 2 states. 1. Running the test. 2. Idle, waiting for the user to hit a run button again, or hitting an End program button.

Script to Rerun Successful Advertisement on Multiple Systems

Hi Guys,
I need to rerun a particular advertisement for a package on multiple computers. I Am able to run it on a single system via the right click tools but how do it do it for multiple systems.
Is there a script for this which could be provided ?
Many Thanks

If you right click on the deployment in the monitoring node and select rerun deployment you will get something like the below from the right click tools by Now Micro
You can then select the group you want and hit Start.
Another option would be to set the deployment properties to Always run the program, but this would make all devices always rerun the deployment.
If you wanted to be able to select specific devices then you will probably need to script yourself something unless someone has already done it.
You could start by looking at Deployment - Rerun Deployment.ps1 that's installed by the right click tools.

BI Apps ODI Load Plan Execution Error and Question on Rerun

I am following the technetwork Cookbook: Installing and Configuring Oracle BI Applications 11.1.1.7.1 to install and configure my first BIApps with ODI. Smooth until I execute the Load Plan.
Following errors were found on first attempt of execution. Without doing any change, I re-executed the load plan, error again but this time the message is difference (2nd attempt)
Question:
- How shall I start to diagnostic the ODI error?
- Apparently there are something left in the failure execution, how I can clean it up for reruning the Load Plan?
Many thanks.
ODI errors on first execution
ODI-1519: Serial step "Start Load Plan (InternalID:1500)" failed because child step "Global Variable Refresh (InternalID:2500)" is in error.
ODI-1519: Serial step "Global Variable Refresh (InternalID:2500)" failed because child step "1 Domain (InternalID:5500)" is in error.
ODI-1519: Serial step "1 Domain (InternalID:5500)" failed because child step "2 Domain SDE (InternalID:35500)" is in error.
ODI-1519: Serial step "2 Domain SDE (InternalID:35500)" failed because child step "Serial (InternalID:36500)" is in error.
ODI-1519: Serial step "Serial (InternalID:36500)" failed because child step "3 SDE General Domain (InternalID:54500)" is in error.
ODI-1519: Serial step "3 SDE General Domain (InternalID:54500)" failed because child step "Load Target Table (InternalID:55500)" is in error.
ODI-1519: Serial step "Load Target Table (InternalID:55500)" failed because child step "EBS_12_1_1 - DSN 1000 (InternalID:56500)" is in error.
ODI-1519: Serial step "EBS_12_1_1 - DSN 1000 (InternalID:56500)" failed because child step "DOMAIN (InternalID:57500)" is in error.
ODI-1519: Serial step "DOMAIN (InternalID:57500)" failed because child step "Parallel (InternalID:58500)" is in error.
ODI-1518: Parallel step "Parallel (InternalID:58500)" failed; 5 child step(s) in error, which is more than the maximum number of allowed errors (0) defined for the parallel step. Failed child steps: COMMON (InternalID:59500), HUMAN_RES (InternalID:90500), FINANCIALS (InternalID:95500), SUPP_CHAIN (InternalID:122500), PROJECTS (InternalID:98500)
ODI-1518: Parallel step "COMMON (InternalID:59500)" failed; 11 child step(s) in error, which is more than the maximum number of allowed errors (0) defined for the parallel step. Failed child steps: SDE_ORA_DOMAINGENERAL_PRODUCT_CLASS (InternalID:69500), SDE_ORA_DOMAINGENERAL_FND_LOOKUPS PAY_GROUP (InternalID:88500), SDE_ORA_DOMAINGENERAL_FND_LOOKUPS MARITAL_STATUS (InternalID:85500), SDE_ORA_DOMAINGENERAL_PRODUCT_MASTERORG (InternalID:73500), SDE_ORA_DOMAINGENERAL_PRODUCT_CATEGORYNAME (InternalID:67500), SDE_ORA_DOMAINGENERAL_STATE (InternalID:61500), SDE_ORA_DOMAINGENERAL_FND_LOOKUPS CUSTOMER_CATEGORY (InternalID:83500), PRODCAT (InternalID:75500), SDE_ORA_DOMAINGENERAL_FLEXFIELD (InternalID:89500), SDE_ORA_DOMAINGENERAL_FND_LOOKUPS ORGANIZATION_SIZE (InternalID:82500), UOM - Serial (InternalID:78500)
ODI-1217: Session SDE_ORAR1211_ADAPTOR_SDE_ORA_DOMAINGENERAL_PRODUCT_CLASS (38500) fails with return code 8000.
ODI-1226: Step Run SDE_ORA_DomainGeneral_Product_Class fails after 1 attempt(s).
ODI-1240: Flow Run SDE_ORA_DomainGeneral_Product_Class fails while performing a Integration operation. This flow loads target table W_DOMAIN_MEMBER_GS.
ODI-1228: Task SDE_ORA_DomainGeneral_Product_Class (Integration) fails on the target ORACLE connection BIAPPS_DW.
Caused By: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12516, TNS:listener could not find available handler with matching protocol stack...
ODI errors on second execution
ODI-1519: Serial step "Start Load Plan (InternalID:1500)" failed because child step "Global Variable Refresh (InternalID:2500)" is in error.
ODI-1519: Serial step "Global Variable Refresh (InternalID:2500)" failed because child step "1 Domain (InternalID:5500)" is in error.
ODI-1519: Serial step "1 Domain (InternalID:5500)" failed because child step "2 Domain SDE (InternalID:35500)" is in error.
ODI-1519: Serial step "2 Domain SDE (InternalID:35500)" failed because child step "Serial (InternalID:36500)" is in error.
ODI-1519: Serial step "Serial (InternalID:36500)" failed because child step "3 SDE General Flexfield (InternalID:37500)" is in error.
ODI-1519: Serial step "3 SDE General Flexfield (InternalID:37500)" failed because child step "Finalize Flexfield (InternalID:50500)" is in error.
ODI-1519: Serial step "Finalize Flexfield (InternalID:50500)" failed because child step "EXEC_TABLE_MAINT_PROC (InternalID:51500)" is in error.
ODI-1217: Session EXEC_TABLE_MAINT_PROC (107500) fails with return code 20000.
ODI-1226: Step TABLE_MAINT_PROC fails after 1 attempt(s).
ODI-1232: Procedure TABLE_MAINT_PROC execution fails.
ODI-1228: Task TABLE_MAINT_PROC (Procedure) fails on the target ORACLE connection BIAPPS_DW.
Caused By: java.sql.SQLException: ORA-20000: Error creating Index/Constraint : W_FLEX_SQL_G_U1 => ORA-01452: cannot CREATE UNIQUE INDEX; duplicate keys found

Hi,
The first error happened is
ORA-12516, TNS:listener could not find available handler with matching protocol stack...
The above is due to the listener been disconnected while the LP is executing. This can be solved by restarting the load.
The second error happened is
ORA-20000: Error creating Index/Constraint : W_FLEX_SQL_G_U1 => ORA-01452: cannot CREATE UNIQUE INDEX; duplicate keys found
The above is due to the duplicate records found in the table w_flex_sql_g. You can solve this by deleting the duplicated records in that table like referred in the below link
OBIEE, Endeca and ODI: BIApps and ODI 11.1.1.7.1 Full Load
Regards,
Saro

Rman to handle table restore for batch rerun

Hi all,
11.2.0.1
Our batch process sometimes need to be rerun or reprocess due to erroneous process/output.
For the rerun process, we need to import back 1 table affected, from the last night backup.
Is RMAN capable of restoring a single table on the PROD database without affecting other tables?
Or this can be done only thru expdp, and that is why we need also to backup this table daily using this tool?
Thanks a lot,
zxy

yxes2013 wrote:
So I am justified that I have to use expdp as a means of backing-up single table? Contrary to what they say that expdp can not be used as backup tool?
Thanks,
As Fran and many, many, many others have pointed out on many, many, many other threads, export cannot be considered a backup of the database because it cannot be used to restore a database. You must have a live, healthy, functioning database up and running in order to have something in which to import.
That does not mean that export has not place in a normal backup regimen. Most DBA's will include a periodic export along with their regular rman backups. For exactly the type of scenario you describe. So if you know going in that a batch job may need to be rolled back, it is perfectly justifiable to begin that batch job with an expdp step to export the tables that are involved. On the other hand, if there is no other processing occurring between the time this batch job starts and the time you discover you need to 'reset' and run it again, a database PIT recovery from rman backup, or a database flashback might be a preferable solution.
As in all things, the answer is 'it depends' and only your organization can decide ...

How to rerun P45 once the live run happend and XML files generated

Hi All,
I have run the P45s live run and upon clicking on the B2A manager button, it has taken me to the efiling screen but the efiling has ended up with connection error with the Government Gateway due to the expiry of certificate
We have now installed a new certificate and while trying to submit the P45s we have an issue.
I have reset the IT65 to original status by deleting the OT record that was created and the deletion of Leaver date.
It allows me to run the P45s but the B2A manager button does not appear.
How do i proceed with efiling. Please advise.
Many Thanks in advance
Veena

Hi Veena,
An earlier post by you regarding P45 is as below
Starter report P45(3) / P46 efiling for UK
from my understanding though i have not worked on GB Payroll you have said that you deleted IT 65 details of leaver,however there must be clusters generated in system from where the earlier data needs to be deleted and may be that is why you are facing the issue.
In Indian payroll when we execute text file for efiling of tax after challan mapping all the data compiles and sits in PCL cluster and therefore we are unable to generate form 16 with proper output,here we delete the clusters and rerun again the mappings and then check form 16.
Hope this might help you,Experts have suggested you earlier also,they may correct me for this.
Salil

Rerun tts import with ASM

I am doing a data migration from one platform to another (itanium, shared file system to linux ASM). I went through the process to import all datafiles into ASM with Rman, and I was ready to import the metadata.
I messed up, and forgot to create the system trigger setting the proper date format for some default column values.. My import worked but many of the objects failed creation. Now I have a database with the tablespaces imported, but I want to rerun my import. If I drop the tablespaces including contents (to remove the metadata), I will lose my datafiles and I will have to start over.
1) is there anyway to drop a tablespace without dropping the datafiles so I can rerun ??
2) is there anyway to rerun a transportable tablespace import once it has a partial success ??
3) what is my best option.
At this point, I am probably going to shutdown the database, and remove the non-imported tablespaces (system, undo, etc), recreate the database, then rerun the import with the new "shell" leaving the TTS datafiles I already copied over intact.. This is time consuming, and I am hoping to find a better solution
Any ideas would be appreciated.

1. Straight from the documentation ([DROP TABLESPACE|http://download.oracle.com/docs/cd/B14117_01/server.101/b10759/statements_9004.htm|DROP TABLESPACE]):
Oracle Database removes from the data dictionary all metadata about the
tablespace and all datafiles and tempfiles in the tablespace. The
database also automatically drops from the operating system any
Oracle-managed datafiles and tempfiles in the tablespace. Other
datafiles and tempfiles are not removed from the operating system
unless you specify INCLUDING CONTENTS AND DATAFILES.
HTH!

Rerun f.5d & f.5e

Similar Messages

Maybe you are looking for