Rerun registration process

Hi folks,
is there a way to re-run registration process in order to fill void fields or change address?
Thanks,
G.

You can change your registration data with Apple here: http://register.apple.com
You'll have to sign in with your Apple ID and have the serial number at hand.

Similar Messages

  • Cannot finalise registration process of CS6 due to Adobe ID error

    I have just installed 13 copies of CS6 in our studio, 12 successfully but one is having problems. The registration process goes smoothly using our relevant Adobe licences, the problem occurs when we have to enter the Adobe ID at the end of the process. The two option sappear, sign in later or sign in now. Once we click sign in now it just becomes the spinning wheel of boredom, can't do anything. of course the problem is that it says you have 7 days to do so before it makes the application inoperable.
    So what is wrong and how do I fix this and what does an Adobe ID have to do with this whole thing anyway? We have the legal licences, why do we also need an Adobe ID to complete the process
    Graham

    I had the same issue & contacted Tech Support several times before finally they found that it must be my "corporate network" setup.
    This is in part becuase Adobe is now requiring that you use your Adobe ID to register CS6.  See the link below:
    Adobe ID Required for Photoshop CS6 Beta and Upcoming CS 6 Products
    http://blogs.adobe.com/oobe/2012/03/adobe-id-required-for-photoshop-cs6-beta-and-upcoming- cs-6-products.html
    After several "live" chats with Adobe support they gave me a link to directions for a work around.  The problem was our "corporate network" setup, so this will occur on each machine that you install CS6 on while connected to a "corporate network".
    To work around the CS6 registration error on a "corporate network" you must do one of the following: disable the proxy server, disconnect from the internet completely to use the Offline Activation option, or use an alternate outside internet source to complete the CS6 registration.
    Adobe Tech Support directed me to a forum on how to disable the proxy server, but really all you need to do is unplug your internet source, and then you can generate the codes that are needed to complete the registration with the Offline Activation option. This worked for me, I'm all set now.
    See the links below:
    Forum link from Adobe Tech Support
    http://forums.adobe.com/thread/1005256
    Offline Activation
    https://exception.licenses.adobe.com/aoes/aoes/v1/t1?locale=en

  • User Management Setup: Registration Process not visible in Access request f

    Hi,
    We are trying to setup a autorisation flow for our responsibilities by using User Management.
    For this I added some roles to the MISC Role category.
    Then I created a registration process for these roles.
    After that I would expect to see the acces request in the Additional acces request page. Unfortunately I don't.
    When I run the view object behind the page, I notice that column umx_reg_services_vl.reg_funtion_id is empty for the roles I added. The seeded authorization that was allready present has a value for this column, and is presented in the screen.
    I am wondering how to add a value into this reg_function_id column. I cannot seem to find the functionality in the User management pages.
    We are on 12.1.2
    Can someone help me out?
    Kind regards,
    Wilro

    Hi,
    You will need to have required permission (atleast read permission) for displaying this content. Access denied is showing at com.sap.portal.system/security/sap.com/NetWeaver.Portal/high_safety/com.sap.portal.heartbeats/components/PortalHeartbeat
    Go to System Admin -> Permissions -> Portal permissions. Expand security zone folder -> sap.com and the subsequent folders in the above path (sap.com/NetWeaver.Portal/..) . Right click the last folder in that path as mentioned above and provide read permissions to the delegated content admin role.
    Regards,
    Harini S

  • How to create custom "new user registration" process?

    Hello,
    I need to allow new users self-registration, but they must provide a little bit more information during registration. So I need to change or create new registration process.
    How can I do this?

    As far as your goal is only to extend user attributes:
    1) Check the membership module
    2) View source on the Registration page
    3) Create your new registration page with
    new user ldap attributes as input fields names
    and test your new template with membership module
    PS: For more customization you have to write your
    own module or extend membership module.
    Cheers,
    Alex :-)

  • User Registration Process: Task Assingment for a Self-Request User

    Hi guys,
    Doubt: In the User Registration Process Can I configure the Target User's Manager as the Assignee of the Awaiting Approval Data? I understood that I can do that because the user has not been created yet. Does it make sense? I need to send the approval to the user's manager and he/she will be responsible to complement the user info.
    Scneario: In the User Registration Process, that Awaiting Approval Data has been configured with a Task Assignement Adapter. This adapter reads the Manager Login in the request info and sets this values as the "Adapter return value for key". Also, the adapter has another task that sets the "Adapter return value for key type". The adapter is working ok.
    Problem: When the adapter is run, OIM outputs a message that says adapter was run. I don't know why, but OIM runs the adapter many times, where it should run once. Also, the task is been assigned to the SelfREg user.
    What do I have to do to get my task assignment adapter working as expected?
    Thanks,

    Yeap. Sorry! I've searched for my problem but I haven't seen that post.
    More problems with hard-coded-based development of OIM. A process must be a process, a task must be a task, a form must be a form etc. A product like OIM can not have internals and hard-coded instructions. And dont have statements like: If the object is something of OIM, don't allow this and that; else, allows the user do whatever :-)
    Thanks kevin.

  • What does the registration process expect as my screen name?

    What does the registration process expect as my screen name?
    i used
    BILL-PC
    WKYBURZ
    [ email address removed by admin ]
    nothing works
    my conclusion : it is a bug

    Trevor,
    it worked
    it seems that if you make a mistake the first time around .. it goes into
    some strange buggy loop
    doing it from scratch worked
    remember that
    thanks again
    Bill Kyburz

  • Use the survey's information (self-registration process - ROS)

    Dear Experts,
    We use the self-registration process (ROS).
    After the vendor register him self, he gets a survey to fill and send back to the SRM system.
    Some can please help me how I can use the information that the vendor write in the survey?
    (with or without the BW system).
    Best Regards
    Eyal Weinreb
    HP

    Hi,
    Buyer can look at the data in Supplier Preselection.
    http://help.sap.com/saphelp_srm70/helpdata/EN/45/e76729b3544ebde10000000a11466f/frameset.htm
    If you are looking for more analytics side, please check the transaction ROS_QSTN_SURVEY and help for Web Survey.
    http://help.sap.com/saphelp_nw70/helpdata/en/a5/73863c593a8767e10000000a114084/frameset.htm
    Regards,
    Masa

  • Best technique to use for complex online registration process development

    I am just starting Flex 4.5. Trying to develop an adjustable "course enrollment system" where admin has rights to name the sections of the course and set their prices. Prices will differ based on whether the applicant belongs to a certain pricing group (ex student or pensioner or full time employed)
    The applicant has to through 4 screens of forms, then presented with his final cost for all courses he has decided to attend, display a confirmation message and email the results email to both the coordinator of the course and the applicant.
    I have a question, what is the best technical strategy to use when developping something like that ?
    At the moment I am thinking of creating a custom component for every screen of application process and using the main.mxml file to switch between the screens (switch between the states of main.mxml which display a required custom component within them and not displaying all other custom components)
    Then a value data object would be extracted from every custom component and at the end of the registration process all the information is extracted from multiple value data objects and send by email through an smtp protocol programmed into the flex application)
    It seems so compliated to use states in main.mxml within which custom components are loaded. There must be an easier way to facilitate my
    Admin menu and registration process. Would you have a batter idea ?
    Thank you for your time spent reading my post,

    I am just starting Flex 4.5. Trying to develop an adjustable "course enrollment system" where admin has rights to name the sections of the course and set their prices. Prices will differ based on whether the applicant belongs to a certain pricing group (ex student or pensioner or full time employed)
    The applicant has to through 4 screens of forms, then presented with his final cost for all courses he has decided to attend, display a confirmation message and email the results email to both the coordinator of the course and the applicant.
    I have a question, what is the best technical strategy to use when developping something like that ?
    At the moment I am thinking of creating a custom component for every screen of application process and using the main.mxml file to switch between the screens (switch between the states of main.mxml which display a required custom component within them and not displaying all other custom components)
    Then a value data object would be extracted from every custom component and at the end of the registration process all the information is extracted from multiple value data objects and send by email through an smtp protocol programmed into the flex application)
    It seems so compliated to use states in main.mxml within which custom components are loaded. There must be an easier way to facilitate my
    Admin menu and registration process. Would you have a batter idea ?
    Thank you for your time spent reading my post,

  • Initial Setup Problem - Starting the SLD Registration process

    Hi,
    we are installing our PI development system. During initial configuration with "NWA --> Configuration Management --> Scenarios --> Configuration Wizard --> Netweaver initial setup" the wizard stands still at Step 68 (of 561) "Starting the SLD Registration process".
    We have restarted the system but after starting again the wizard it stands still again.
    Same problem on our PI quality assurance system.
    PI 7.11 on Windows 2008 R2 with MSSQL 2008 R2.
    Steps of installation:
    1) Installation of PI 7.11
    2) Postworks ABAP (License, TMS, Profiles, rz04, ...)
    3) Kernelupdate to 106
    4) Updates SPS7 ABAP
    5) Updates SPS7 JAVA
    6) Run NWA Initial Setup with J2EE_ADMIN
    Could someone help?
    Thanks
    Regards
    Thomas Mühl

    Then possibly the password was set wrong somewhere (since the "-" character is not blocked). Its advisable to check all service users passwords, to prevent other issues like this one to occur. Please check the OSS note "999962 - PI 7.10: Change passwords of PI service users" for more information on this.

  • Examples of a TRM Sales Tax registration process

    Hi.  I would be grateful for an example of a Sales Tax registration process using TRM.  I have looked at the Solution Map and the ES web service bundle material, but they have very little detail.   Other 'create business partner' documentation is too generic - i.e. individual, not organisation.   A typical example of a real business process scenario would be great.  Perhaps I'm looking in the wrong place?  Guidance welcome!
    Regards,
    Nick

    Hi Nick,
    you can process tax calculation in FI. See link :http://help.sap.com/erp2005_ehp_04/helpdata/EN/36/41913ab525fb23e10000000a114084/frameset.htm
    BR, Tomislav

  • After i register my imac it just goes back to the very beginning of the registration process

    I lost my password and when thru the process of the whole rm var/db/.applesetupdone  thing to reset my admin password. it takes me thru the registration process but when it gets to the end it just starts over completely at the beginning of the registration process. does anyone have an suggestions?

    Boot up in single user mode.  See if /var/db/.applesetupdone  exists.
    The name is:
    -rw-------
    1 root 
    wheel     
    1K Dec 13  2010 .AppleSetupDone
    If not create one:
    mac $ pwd
    /var/db
    mac $ sudo cat .AppleSetupDone
    Password:
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
            <key>Address</key>
            <dict>
                    <key>AreaCode</key>
                    <string>111</string>
                    <key>City</key>
                    <string>burg</string>
                    <key>Company</key>
                    <string></string>
                    <key>CountryName</key>
                    <string>United States</string>
                    <key>ExistingEmailAddress</key>
                    <string></string>
                    <key>FirstName</key>
                    <string>Robert</string>
                    <key>LastName</key>
                    <string>Last</string>
                    <key>LocalPhoneNumber</key>
                    <string>111111</string>
                    <key>StateProv</key>
                    <string>St</string>
                    <key>StreetAddr1</key>
                    <string>111 S Street</string>
                    <key>StreetAddr2</key>
                    <string></string>
                    <key>ZipPostal</key>
                    <string>11111</string>
            </dict>
            <key>RegistrationInfo</key>
            <dict>
                    <key>AppleSpam</key>
                    <string>NO</string>
                    <key>Location</key>
                    <string>B</string>
                    <key>Occupation</key>
                    <string>13</string>
                    <key>OthersSpam</key>
                    <string>NO</string>
            </dict>
    </dict>
    </plist>
    mac $

  • Is the registration process for CS5 Design Premium different than CS4?

    When I installed my CS4 Design Premium the program would ask me to register from time to time until I finally did it to stop the reminder from coming up.
    Is the  CS5 Design Premium registration process the same?

    I can't imagine why not, but you really should call Adobe sale to make sure you've got all the proper credentials.
    Bob

  • Why is the whole registration process so convoluted?

    I seem to be doing cartwheels galore to register my machines. I understood that there would be issues with my being behind a proxy, but I find myself entering redundant data over and over again.
    More to the point, I have many questions:
    1 - What is the difference between sconadm and the java regclient as far as registration process? Shouldn't these 2 functions be merged? Shouldn't they use a common pool of information?
    2 - Why do I need to run the java discovery in disconnected mode and then run the browser version in order to get my boxes registered?
    3 - Can I add the missing information to the ProductRegistrationData.xml file prior to registering the information? This includes system_serial_no, serial_no, vendor, system_contract_id, contract_id, address_1, address_2, city, state_province, country_territory, and postal_code. This saves manual editing on the web site.
    Thanks.

    Thanks for the response. Hopefully I can talk about the inventory part in this forum since the vast majority of my issues lie in that area.
    In response to point #2, I am behind a firewall which seems to effect the registration process. If I try to register the machines straight from the browser, it seems to nab all of my proxy information from there and then ignores my machines because it thinks they are all out on the Internet. So I am forced to use the BigAdmin method of registering my gear in disconnected mode (http://www.sun.com/bigadmin/sundocs/articles/screginvdm.jsp).
    Another area of frustration is the lack of required software checks in the running of apps and loading of software. In point, the java client for registration needs to use the JRE 1.5.0_13. This is not checked for when executed and causes the proxy features to not necessarily work correctly. The installation of the SUNWservicetagu package does not check for the required PICL libraries. These libraries were not installed on boxes which used the SUNWCall cluster but were installed if the full blown SUNWCXall cluster was used. The effect of not having the PICL packages installed is that these boxes return a value of -1 to the registration client.
    As far as your response to point #3, I would think that being able to programatically insert data into fields would be a tremendous time saver for anyone with large volumes of machines who wants to make use of this inventory tool. Otherwise, there is no point to performing this task. Also, having a command line interface like sconadm for doing this registration would be prefered over the java client for sending this data.

  • Worst Forum Registration Process Ever

    I just survived the worst forum registration process ever, my ID has to be 9 characters long, for real?  Talk about discouraging participation, mission accomplished, on that note, hi there, glad to be here behind the Iron Curtain sorta speak.

    I just survived the worst forum registration process ever, my ID has to be 9 characters long, for real?
    There are a number of well-designed forums (aside from Cisco) that requires a minimum of 9 characthers.  Some will only accept emails.

  • Online Number registration process logs me out so ...

    When stepping through the online number registration process I can select a number in Australia but when I go to finalise I get logged out.
    When I login again I am at the main screen and so I navigate to the online numbers and try to activate and I get logged out again... round and round I go!
    I've tried Crome and Safari so don't think it is a browser issue.
    Please help!?

    * Websites remembering you and automatically log you in is stored in a cookie.
    * Create an allow cookie exception (Tools > Options > Privacy > Cookies: Exceptions) to keep such a cookie, especially for secure websites and if cookies expire when Firefox is closed.
    * In [[Private Browsing]] mode all cookies are session cookies that expire if that session is ended, so websites won't remember you.
    * Do not use [[Clear Recent History]] to clear the "Cookies" and the "Site Preferences"
    Clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
    * http://kb.mozillazine.org/Cookies

Maybe you are looking for