Resampling tips&tricks

Hello dear all!
There are 2 sound cards  on my PC: hda_intel (ALC888 from Realtek) and SBLive 5.1
1. I could that ALSA make software resampling (44.1 to 48 kHz) when sound playing through SBLive and do not resampling if using hda_intel. How asoundrc must be configured in this case?
2. In my OS (Kubuntu 10.04) installed not latest version of ALSA libs. How I can know exactly which version of ALSA using. I mean are there any incompatibilities between for instance 1.0.23 ver of ALSA  and 1.0.24 of alsa-lib, alsa-plugins (I have choose right version of alsa-lib, alsa-plugins and install them).
3. Is it possible to use OSS and ALSA both? I could that hda_intel uses ALSA, SBLive -­ OSS. How exactly?
Thank you in advance

Thank you for your reply and detailed config.
1. I need separate settings for each sound card.
2. "Is your SBLive a hardware-mixing model".
SBLive 5.1 supports hardware mixing streams but with current ALSA settings it does not - I don't know why.
3. "Whereas surround51 doesn't use dmix". I have 4 satellites, subwoofer.
I try these
blop and cmt was installed by Synaptic.
4./etc/asound.conf was created and then I paste to it follow text:
pcm.upmix_20to51 {
    type plug
    slave.pcm lowpass_21to21
    slave.channels 3
    ttable {
        0.0     1       # left channel
        1.1     1       # right channel
        0.2     0.5     # mix left and right ...
        1.2     0.5     # ... channel for subwoofer
pcm.lowpass_21to21 {
    type ladspa
    slave.pcm upmix_21to51
    path "/usr/lib/ladspa"
    channels 3
    plugins {
        0 {
            id 1098 # Identity (Audio) (1098/identity_audio)
            policy duplicate
            input.bindings.0 "Input";
            output.bindings.0 "Output";
        1 {
            id 1672 # 4 Pole Low-Pass Filter with Resonance (FCRCIA) (1672/lp4pole_fcrcia_oa)
            policy none
            input.bindings.2 "Input";
            output.bindings.2 "Output";
            input {
                controls [ 300 2 ]
pcm.upmix_21to51 {
    type plug
    slave.pcm surround51
    slave.channels 5
    ttable {
        0.0     1       # front left
        1.1     1       # front right
        0.2     1       # rear left
        1.3     1       # rear right
        2.5     1       # subwoofer
    hint {
            show on
            description "Upmix channel"
A problem is: when I try to check sound in SystemSettings/Multimedia a message displayed : "The device Upmix channel does not work", and sounds played by snd_hda_intel. So this settings does not applyed to snd_emu10k1.
Where is my mistake? I should use Creative SBLive (snd_emu10k1).
Thank you in advance

Similar Messages

  • Did you know-? Animation Tips & Tricks

    Did you  know that you can animate any object you create in Project ROME – and  that it's easy to do too? Just follow these quick steps (and be sure to  have your timeline showing – View > Show Timeline):
    1.Select the object you want to animate
    2.Click on the stop watch in the upper left of the timeline
    3.Drag the top arrow within the timeline to indicate how long you want the animation to talk place (e.g., 10 seconds)
    4.Animate!
    You can drag the selected object to create an animation path, change the object's color or even transparency. Check out this latest video on more about creating animation: http://bit.ly/9m4ug4. Let us know how this works for you and if you have any suggestions or questions along the way!
    Thanks again for your feedback!
    Sarah
    Sarah
    Forum Moderator

    Hi Romans,
    Did you all get a chance to experiment  with the tips & tricks we posted yesterday? If you did, what did you  think? Did you discover anything interesting or find something you  didn't like? What tips & trick can you share? Please keep providing  us with your feedback. It's great to hear everyone's concerns, praises  and suggestions, and it's immensely valuable! 
    And for those of you who haven't experimented yet….get rolling and try it out now!
    Thanks,
    Sarah
    Sarah
    Forum Moderator

  • Overclocking the i7 in Tips & Tricks

    Harm Millaard, the hardware guru from the PrPro forum has just posted a LINK to his overclocking the i7 guide, in the Tips & Tricks sub-forum.
    If you're considering doing this, you might want to give it a read.
    Good luck,
    Hunt

    My i7 rig is with a socket 1156 board, an Asus P7P55D mobo, and an 860 CPU. I know the Corsair DDR3 memory @ its stock 1.65v simply doesn't run at 1600mhz like it says on its box - 1333mhz seems to be its stability wall.
    I upgraded my Q6600 and Asus P5B deluxe rig because so many people said to never consider overclocking on an editing rig. Was that over-cautious advice?

  • Elgato EyeTV Hybrid tips & tricks

    I didnt know where else to put this so im posting this here. I'm looking for any tips & tricks or whatever you want to call it with the Elgato EyeTV Hybrid for Mac. Reason this being is because im using an Xbox 360 with this and i feel my experience could be much better, with quality and responce time.
    I know all the Converting/Encoding whichever is all being done by the iMac so i suppose id have to live with the response time but is there anything i can do to the settings for quality? Anything you want to suggest please do, id be happy to try it and give feedback.
    Thanks

    There is no interface with the Eyetv to the Dish receiver that would permit channels to return. Your Eyetv is only as good as the channel the reciever is set to. In other words, your Eyetv will retrieve any channels that are not regulated by a reciever to interpolate them, ie: "Over the air" and/or a "straight cable connection" without a set top box. Whether it be a Dish network or a local cable company, any circumstance of a set top box will not be compatible with Eyetv for the lack of it's abilty to change the channels on that box. The only circumstance I have ever seen is when a viewing/recording device has an IR blaster that transmits the channel selection to that set top box and changes the channels much the same as you would with a remote. That being said, there is still the issue of that particular device knowing the IR codes to your particular box.
    Your Eyetv is good for "Over the Air" and/or a straight Cable coax connection only. Sorry.
    Mac Mini   Mac OS X (10.4.8)  
    Mac Mini   Mac OS X (10.4.8)  

  • Business Workplace - "Tips & Tricks"

    I've just noticed a very, very cool feature in Business Workplace. When you go to your Inbox, and you hover over "Tips & Tricks," something appears, a bit like a Windows tooltip, except far more useful and far less annoying.
    Does anyone know how I can get such a feature into an ABAP programme I write myself? It looks like it should be easy - probably something like set a property on an object and watch it happen. But I can't work it out, I think I must be looking in the wrong place...

    Hi Robert,
    The Preview Pane utilizes HTML controls. A new item for the "Tips & Tricks" is selected every time you click on a different workitem or deadline message. Function module SIN_WI_PREVIEW_TIPS gets the tip and builds the HTML.
    Cheers,
    Ramki Maley.

  • Tips & Tricks to manage time to contribute in SCN

    Hi SCN Mates,
                 The question of managing time to contribute in SCN and be in the top list of contributors is always a challenge, I wonder how other guys are managing it along with project work and personal life.
    Through this thread I would like to ask all top contributors to share few tips on how do you manage your time to contribute in SCN and be in top?
    I know with dedication and knowledge, at same time everyone will have their office work at priority after family/personal time.
    Also contributing for an hour daily is also not possible because you never know whether you get ideas within an hour ;-).
    Anyway, share your tips & tricks...
    Thanks,
    Umashanakr

    People who become Top Contributors fall into two main categories
    Category 1 - There is no need to know anything about SAP at all, but since they are SAP professionals at the end of the day, they know enough to get points. They spend all their time on SCN, Must follow every single member of HCL. Must go to each blog and like it ,and write "thank you". They  read every question posted on the forum, whether they know anything about it or not, and reply to it. They have excellent google skills, so they google the answer and post links in reply to every question. They could vary their approach by becoming active in Coffee Corner as well. Soon they will have million points and be a top contributor.
    Unfortunately, this method is not for those who have family/work/other commitments which are more important.
    Category 2 - These people have built up a tremendous amount of knowledge after years of practising in the business. They are genuine experts. They do not come into SCN with the sheer intent of accumulating points. However, when they do come in, and see fit to respond to a post, it is invariably the correct answer or  very helpful, that they get marked accordingly. These people post thoughtful blogs or comments or documents or discussions, which are useful and appreciated by the community and they get marked accordingly. Sooner or later, without really trying, but by simply practising their profession, these people accumulate enough points to become Top Contributors.
    These people do not have a set strategy intended to accumulate points, but they do have a set strategy of being good and knowledgeable at their job. They manage their work/life balance in a way that suits them to achive this goal.
    I am afraid there is no fixed way to achieve lofty goals with little or no effort.
    There is a 3rd category, who are pretty decent in their knowledge and sporadically answer questions when they feel like, and who randomly get points for their responses, and they will never become top contributors, however, they are not too worried about it, and they do get to spend time with their families/other interests. This is a technicality that need not detain us.
    YMMV
    Hope this helps.

  • ECC 6.0 Upgrade - Tips, Tricks, Lessons Learned needed (Esp. in SD, LO, MM)

    Greetings Experts!
    I am searching for information and/or documentation in regards to tips, tricks, lessons learned, and "steps to take" while upgrading to ECC 6.0 (from 4.6c, to be specific).
    We have the install guides, and I'm currently looking at the ERP Solution browser to discern the differences between the two releases... however, we're in need of information on specific actions or things to look for after the technical upgrade. I am having trouble finding any SAP documentation of this kind.
    Links to SAP documentation are highly desired. Personal documentation in this regard would be highly appreciated as well! My e-mail address is in my profile.
    Many, many thanks in advance!
    Cheryl

    Try these links. It might be of interest to you:
    https://wiki.sdn.sap.com/wiki/display/HOME/ERP2005+Upgrade
    http://help.sap.com/erp2005_ehp_02/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/7308da46-0d01-0010-30aa-b61527ba008c?rid=/library/uuid/9cfdd546-0d01-0010-6688-ba8ddc48edc9 [original link is broken]
    http://www.id.unizh.ch/dl/sw/sap/upgrade/Master_Guide_Enh_Package_2005_1.pdf
    http://www.sap.com/solutions/business-suite/erp/pdf/ERP_Upgrade_Guide.pdf
    Hope this will help you.
    Ashish

  • OracleWorld broken links - Tips,Tricks,Techniques

    I get a broken-link error when attempting to retrieve either of these files:
    OracleWorld 2003: Top 10 Most Popular Sessions
    4. Oracle Database: Tips, Tricks, and Techniques
    40118_sgeorge_Tips and tricks for DBA V2.ppt
    40118 - sgeorge Tips and tricks whitepaper 2003.doc

    Hi Ronald,
    Apologies for the delay in responding to you.
    The Documentation Feedback forum is for issues relating only to the OTN Documentation pages at:
    http://otn.oracle.com/documentation/index.html
    Perhaps you could try the Member Feedback forum instead at: Community Feedback (No Product Questions)
    Regards,
    Les

  • [Tips & Tricks] Beginners guide to Bloodborne

    There is no doubt Bloodborne will be a difficult game. But do not fear, it's not unbeatable and as long as we stand together as a community we will manage it!
    Let's use this guide to help all the beginners and newbies, especially those who have never played a Demon Souls or Dark Souls game. 
    We will collect all your tips and add them to the:
    *BEGINNERS GUIDE*
    To BLOODBORNE
    #1 Learn how to parry by firing your gun at the right moment! - @LordRoss &
    This can not be stressed enough. It is the most important skill to master if you wish to boss this game so it needs to reiteration. A well-timed parry will open up your opponent for a vicious riposte. This comes in most handy against large opponents who you can take out with very few killer blows rather than chipping away at his health with pin-pricks.
    #2 Learn to chain attacks.
    Due to the new trick weapon system, where each weapon has two functions, you can now chain moves in a way you never could in any Souls game. When you press L1 your weapon will switch from one combat style to another, usually from a quick, short-range attack to a slow, long-range attack.
    The thing is if you press L1 while in the middle of a combo the transition from one style to another itself becomes an attack which will link one style to another. Try start off with two, short range R1 (weak) attacks, press L1 to switch style, adding damage, and follow through into a long-range R2 (strong) attack.
    Remember that on two-handed and dual-wield styles R2, your usual button for firing your gun, now also becomes an attack instead of that button becoming idle. 
    #3 Charge attacks to drop enemies from behind. - JynXten
    In the Souls games back-stabbing was a simple matter of getting behind the enemy and stabbing him in the back. Now you need to charge your attack by holding R2 for a couple of seconds 'til your weapon gives off a glint at which point you let go to deliver a powerful blow which will drop your enemy to his knees so you can ram your blade between his shoulder blades.
    Press forward lightly on the left stick to sneak up on opponents.

    #3 Learn to chain attacks.
    Due to the new trick weapon system, where each weapon has two functions, you can now chain moves in a way you never could in any Souls game. When you press L1 your weapon will switch from one combat style to another, usually from a quick, short-range attack to a slow, long-range attack.
    The thing is if you press L1 while in the middle of a combo the transition from one style to another itself becomes an attack which will link one style to another. Try start off with two, short range R1 (weak) attacks, press L1 to switch style, adding damage, and follow through into a long-range R2 (strong) attack.
    Remember that on two-handed and dual-wield styles R2, your usual button for firing your gun, now also becomes an attack instead of that button becoming idle.

  • Keyboard Tips & Tricks

    Hello,
    First of all Happy Holidays to all.
    I have an old keyboard (the kind that was shipped out with the first iMacs 233-350MHz, the ones before the pro keyboards came out.)
    I was wondering if anyone of you can give some tips on shortcuts that can be done on this old keyboard. I already know the shortcuts command+q, command+w, command+e ect. -- I am looking for more shortcuts that people are unaware of such as F12=Eject (like the eject button on the pro keyboard) -- things of that nature.
    Maybe my question can help someone else turn there old keyboard somewhat into a pro keyboard.
    Thanks,
    Sean

    Sean R....
    Actually your Mac OS "Help" has a list for each OS version that you list in your specs.
    Now for other tricks that depends on your needs. For example some iMac(s) here may not eject using the F12 key. There is other petty software available to do the same thing depending on what OS you are using.
    Mac OS 10 from around 10.2 has Menu Extras nested back in a few folders. [your HD] / System / Core Services / Menu Extras/ -. from here you can click on Eject.menu and an eject icon should appear in your upper tool bar menu. Volume.menu may get set that way (speaker icon) or via Sound preferences. A mouse controled slider appears when selected.
    ...Ron

  • Some tips/tricks for  KinTwom

    First I want to say I got this phone yesterday, and I just love it. I found some things customizable on there and didn't know if anyone else had taken notice to them themselves.
    First, I know that the social networks were removed from the sliding option
    But there is a work around for that. When you open your browser select the address bar, and click the <-- key on your keyboard. type in facebook.com and log in as you normally do. then when that page loads, click on the star in the address bar area on the right side.. it will give you the option to "pin to apps" this will give you instant access to your facebook.. or any site you wish. I do not know how many you can pin. But this is an option to add your social sites to your apps window. 
    Secondly
    I love the color schemes included, and although we arent able to customize the look, or make our own scheme colors.. you can however move the apps around. use 2 fingers and tap on apps screen, this will make the apps collapse.. you can then touch and hold to drag them anywhere on the screen.. put two fingers on it again and it will save and relock the apps. this is great for putting your most used apps at the top of the screen or anywhere you want them on that front screen
    Zune is great, I am really enjoying it.. I have already figured out how to use the zune software with my phone, and move and delete pictures and music. If some of you don't understand how syncing works, when you plug your phone into your computer and your zune opens, you will notice your lock screen says "connected" to disconnect, unlcock screen.. or something like that.. if you unlock your phone screen, you will not be connected to the pc for syncing. I am thinking this is why people are complaining about not being able to sync their phones with the software or that the software isn't recognizing it.. if you do unlcock the screen, just unplug the phone and plug it back in, it will recognize it again. Keep it connected, and it will sync photos, videos, and music. back and forth. To delete music and videos off your phone.. in zune, click on "phone" in the very top navagation area then click on the media type.. you will then see what is on your phone.. right click on the item & select delete.
    ALSO.. you DON"T need a ZUNE pass to enjoy the features of the zune.. there is a work around for that too.. in zune, go to marketplace, and select music or videos.. when you click on a song or music video, you can purchase it with microsoft points I purchased 400 points for $4.99 and was able to download one video and 2 songs I liked.. the zune pass is $14.99 a month for 10 songs.. thats rediculous... and expensive.
    So,.Just purchase the credits seperately, your better off.. when you used all your points.. they have larger quanities you can purchase.. you will see these options when your in the check out area of purchasing them. you can choose how many points you want... AND the points you purchase can be shared across zune and xbox live as well for you gamers.
    I LOVE the threaded texting.. I do not care about forwarding messages to people.. I personally hate getting those kind of texts myself... I dont care that you cant delete one message at a time.. I personally enjoy the simplicity of deleting the entire conversation at once..having this phone after having regular phones. this thing is the easiest, simplist phone I ever got... And it is great. 
    When I was activating the phone I had to have tech support help me, (because of area I live in) so they had me dial that ##number to go deeper into the phones settings.. I noticed that windows items are still in there... like the cloud server information.. I am thinking that these phones were reintroduced for a reason. There may just be updates and options down the road, why else would they keep all of microsofts product in the phone? It's just a thought. But anyways.. I have read so many people complaining about the volume keys not locking when the phone locks.. That doesn't bother me at all.. I never use the alarm.. don't care about it. I never make calls with my phone because I have poor reception where I live.., THIS IS THE BEST TEXTING PHONE!!!!!!!!!!!! at verizon... the other feature phones do NOT have threaded texting at all.. not even the cosmos touch do not believe what reviewers are saying on youtube about the LG cosmos touch.. they obviously don't know what "threaded" texting actually means. there is no threaded texting on that phone... that is why i sent it back and got the kinTwo instead..... with this phone.. you click on the bubble that pops up from a message you recieved, and wa-la conversation screen appears.. no need to go through 5 button clicks to send anything like those other feature phones(blah). you click on messages, click on the conversation and start typing thats all there is to that. awesome. LOVE IT!!!!!
    It is VERY true that you DON'T need a data plan to have this phone.. but it would make sense to get the cheapest data plan.. that way if your not near a wifi connection you can still use the browser.. but it isn't a must have. I have nationwide messaging, which includes unlimited data.. so I am good to go either way. There are settings, you can turn off data roaming, turn off wifi and all that.. so you can choose how you want to utilize the options of your KinTwom. The browser has pinch zooming like a "droid" and it is pretty fluid too. This phone feels like a smartphone when I use it. I just LOVE it!
    I read all the specs, and all the reviews of this phone before I ordered it, so I already knew what was capable and what wasn't and I have no complaints about it on those things. I think I know why the volume doesn't lock when you lock the device, because it is a music player.. and if someone were to use it as a music player, it would be more of a hassle to turn down the music in situations if it was locked.. BUT.. there however should be a settings option in the sound menu to lock it on phone lock.. that way people who do not use it for music, can choose to lock the sound. just a thought for verizon.
    I hear people talking about there wont be any updates or anything like that to these phones simply because microsoft backed out of them.. people are not thinking clearly.. these aren't the original kin phones, they arent depleating their left over inventory.. these are reintroduced as feature phones with smartphone features removed, . and I highly doubt verizon would have people use phones that would forever be out of date.. or not updated. I read in this forum that someone did get some sort of modem update on their device... so updates are probable from verizon. What I would like to see, is the ability to change the app icons using photos downloaded or taken via camera..the same as we can for our favorite contacts. that would be a sweet thing to be able to do. just a suggestion.
    My only issue is if I put my camera setting to night mode the camera will be slower for some weird reason, not sure why that is.. so I will just leave it on auto.  But i love this phone.. it is the best feature phone I have ever owned in my life. Before you buy the phone.. get familuar with the specs and functions of it.. don't go blindly purchasing this phone thinking it's an android or something like that.. this is NOT  smartphone... but it is pretty ****** close to it with some of the features it has and the look of it.
    Hope this post helps some people! =)
    If anyone has any other tricks or tips that havent been mentioned yet.. feel free to post them here. 

    I know this stuff is 3 months old but I just got mine and hadn't yet used the pin function so now I know.
    I hope you are right Nancy that it will have updates, but I really doubt it. This is the norm for Microsoft when stuff they put out bombs. Dish Network had a DVR receiver many years ago that had Microsoft software installed and it was buggy to say the least. They updated it a few times but then abandon it. For a few years Microsoft wouldn't release the code to Dish Network to allow DN to fix the bugs. It was a real "Hate Microsoft" time for those users. DN had to put out their own coded DVR receivers and let the Microsoft ones die.
    I think VZ made a deal with MS and removed the stuff MS wasn't supporting. Then VZ put them out without needing a data package to unload them.

  • DB2 zOS database export tips & tricks

    Does anyone have compiled or know of the existence of a list of tips, pointers, tricks, etc. for the process of exporting a DB2 zOS database (for use in a later import into a DB2 LUW system)?
    Most appreciated any help you may provide.
    Regards,
    Julio Porras.

    I just uploaded a document with the steps that I followed for the DB2 z/OS database export.
    Mind I did this back in October, 2008 (see my original post date).
    You can find the document here:
    http://scn.sap.com/docs/DOC-45835
    I hope you find it helpful.
    Regards,
    JP.

  • Tips & Tricks for daily forum reading?

    At one point in time I used to visit the Arch forums quite actively in my efforts to contribute back to the community.  More recently, I've stopped reading the forums but I now wish to get back into the "swing of things" and read/write the forums daily.  I'm curious as to any tips or tricks the forum "regulars" know about to better tackle daily forum viewing.
    The 2 helpful things I know about are..
    Show new posts since last visit
    and the lesser known about...
    Arch Forum RSS Feed
    How do you guys and gals participate in the forums so much and still have time to be a dev, work, eat, sleep.. rofl  you get the picture! Tell us your secret strategy!

    I recommend the Vimperator Firefox extension.  Once you couple that with the It'sAllText extension you can zip through the forums very easily.
    Why do you need It'sAllText? Simply hit ctrl + I
    But you can only change tabs while gvim is open with the most recent version of vimperator.
    @topic
    open every sub-forum in a new tab
    open every interesting topic in a new tab
    --> work through all the tabs (usually just closing them without reading anything )
    Last edited by jordi (2008-06-11 13:16:37)

  • Library Performance Discussion - Tips & Tricks?

    Over the years, my iTunes library (mp3s-only) has amassed to staggering 1.25Tb. Inevitably, I running into severe performance issues, where selecting songs, searching for songs, tagging and streaming to AirTunes has become a complete pain. My current set-up: all the songs on a 2Tb, FW800 drive hooked up directly into my 2009 MBP
    I wanted to start this topic to aggregate tips and tricks on how to deal with such libraries and what are the best set-up to squeeze out a decent performance.
    To start off with some questions:
    1) Would a RAID set up work?
    2) Is the ‘once and for all’ solution a Mac Pro, 8-core, 32Gb RAM with a 4Tb Raid drive?
    3) What are the options available for external storage and decent iTunes performance?
    4) Are there ‘library file’ tweaks possible?
    5) Options to turn off in iTunes that use computing power?
    6) Where does the ‘spinning rainbow ‘come from?
    Thanks in advance!!

    Gijno wrote:
    Over the years, my iTunes library (mp3s-only) has amassed to staggering 1.25Tb.
    i hear you. my library is now in excess of 1.3 TB
    Inevitably, I running into severe performance issues,
    luckily, i am not having any performance issues
    My current set-up: all the songs on a 2Tb, FW800 drive hooked up directly into my 2009 MBP
    i use two of these drives (one as main, the other as backup). these drives are very fast and extremely quiet. the main drive is hanging off a *standard config* mini (2009).
    I wanted to start this topic to aggregate tips and tricks on how to deal with such libraries and what are the best set-up to squeeze out a decent performance.
    To start off with some questions:
    1) Would a RAID set up work?
    can't comment on that. i am very happy with the performance of the LaCie.
    2) Is the ‘once and for all’ solution a Mac Pro, 8-core, 32Gb RAM with a 4Tb Raid drive?
    i don't think you need such a machine - though i'd love to have one myself
    3) What are the options available for external storage and decent iTunes performance?
    see above.
    4) Are there ‘library file’ tweaks possible?
    unnecessary, IMHO.
    5) Options to turn off in iTunes that use computing power?
    none really, AFAIK. what does +activity monitor+ says when these problems occur ?
    6) Where does the ‘spinning rainbow ‘come from?
    something else on your machine is not +playing game+.
    i would start with creating a (temporary) new admin account, logging into that, and check if the performance issues persist. you may have to populate iTunes on the temporary account with a few tunes.
    reinstalling iTunes is another option (this will not touch your music or iTunes library files). click here for instructions.
    also, when was the last time you ran a +verify disk+ using disk utility ? have your repaired permissions ? what's the size of your startup disk and how much space is left ?

  • Free Business Catalyst Developer Tips & Tricks / Screencasts

    Hey gang! I'm a front-end developer at Simpleflame and I've recently launched my own personal blog which will consist of Business Catalyst developer tips and tricks. The screencasts will be geared towards development mainly. Please swing by and check it out.. see ya there!
    Visit: joe-watkins.io

    You only see that if you have a partner account.

Maybe you are looking for

  • COGS update on other GL Account at the time of Free goods or Sample goods

    Hello, In sales process, Usually the at the time of Delivery, material document is created as DR COGS CR INVENTORY But in the case of free goods or bonus goods or samples: the account should not determines COGS instead it should determine another GL

  • Using system keycodes instead of JAVA virtual keycodes

    I want to implement a key scramble and I need a method to read the system key codes instead of the virtual keys produced by KeyEvent and its methods.Does anybody knows how can this be done?

  • Error using "Microsoft ODBC for Oracle" driver

    I am trying to connect to Oracle 10g Express Edition from Access 2003 on Windows XP. I created a DSN using "Microsoft ODBC for Oracle" driver. When I try to connect using ADO, I get this error: [Microsoft][ODBC Driver Manager] Driver's SQLSetConnectA

  • HOW TO set the input range for analog in (DAQ)?

    How can I set the input range of a - NI DAQ USB 6259 - analog voltage input? I wish to control it directly in my VI. Is it possible to set different ranges for different input channels? Thank you, Roberto

  • Appending notes to report

    hi all I am in customizing the teststand using C#. I want to add some notes at the end of report. Where  can i do that. i have tried to append the notes in axExecutionViewMgr_DisplayReport event like the bellow void axExecutionViewMgr_DisplayReport(o