Rescue and Recovery 4.31 - How to make backup for 2nd hard disk drive?

What should I do that R & R version 4.31 (Windows 7, 64 bit) make backup for second hard drive?
On the screen "Set Schedule and Preferences' in the options "Include partition" I don't have partition D: on my notebook and , of course, it can't be selected.
ThinkPad W701ds, with two built-in disk drive (C: and D, backup is performed on the "USB External Storage Device '.
Solved!
Go to Solution.

see this post http://forums.lenovo.com/t5/General-Discussion/Back-up-to-external-HD-7/m-p/322465#M9269
Thinkpad R61 7733-1GU
Thinkpad X61T 7762-54U
Thinkpad X60T 6363-4GU
Did a member help you today? Thank them with a Kudo!
If a post answers your question, please mark it as an "Accepted Solution"!
Regards,
GMAC

Similar Messages

How I can backup from another Hard disk through my Macbook air?

How I can backup datas from another external storage disk by using My Macbook Air?

How I can backup from another hard disk through my Macbook air in Time Capsule?

Lenovo rescue and recovery will not run a new backup

Tried several times to make a new backup using "rescue and recovery" (i've done this regularly over the years) .. But "rescue and recovery" freezes and then shuts the computer down. This has happened at least 4 times so far.
x201....3249-CTO....i7....4GB RAM....64-bit OS....Windows 7

1. What are the current and previous versions of R&R? When it was upgraded?
2. Did you have the such issue with previous R&R version?
3. Did you try to uninstall previous version and install the new one? Or reinstall the current version? How current vesrsion is upgraded from the previous one - manually or using System Update?
4. Was your OS version upgraded from previous one? I mean as an example XP -> W7
x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
Do it well, worse becomes itself
Русскоязычное Сообщество English Community Deutsche Community Comunidad en Español

How do I backup an external hard disk ( Lacie ) attached to my Mac to time capsule

I have an 2TB Lacie External Hard Disk attached to my Mac using a Thunderbolt cord.
I recently purchased Time capsule and the Technician setup my Time Machine to backup my Mac.
I want to now Also Backup my Lacie ( external Hard Disk ) to my Time Capsule ??

Open the Time Machine pane of System Preferences and remove it from the list of items set to be excluded. It needs to be formatted as Mac OS Extended (Journaled).
(111304)

How can I backup my network hard disk?

I have Time Machine which backs up my local hard disk to a Time Capsule, no problem. However, I also have a networked hard drive, which I would like to back up to another hard drive or DVD. Is it possible to this in Mac OS X? If not, does anyone know of any (free) third-party software to do this easily?

Did you reformat or repartition the disk before using it as your Time Machine volume? Are the previous contents on the drive different from your machine's contents? Also, please verify your OSX and state the model of your Macbook Pro.

How to copy bookdmarks to new hard disk drive

recently changed hdd on my laptop, used window s easy transfer to copy file , but my bookmarks and passwords were not copied, plese help

See:
*https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Rescue and Recovery failed destination network location can no longer be reached

W510, running Windows 7 Pro SP1, updated with ThinkVantage including BIOS 1.37 along with Rescue and Recovery 4.31 yesterday. Using Backup locations "Local hard drive" had not problem, but when it was set to "Network", it gave me "The backup failed because the destination network location can no longer be reached.". Prior to running RR, I manually mounted the shared drive on W510 and could read and write files. The user that mounted the shared drive was not "Administrator" but has Administrator privilege. The network shared drive was a folder on an Windows XP SP3 computer.The shared drive had Full Control granted to Everyone as well as for Sharing. I rebooted W510 before starting RR. After the "network location can no longer be reached" error popped up, a long while later, RR actually wrote some files in the shared drive and then finally it aborted. It created on the shared drive RRBackups\SZ\<UUID>\... (among other folders and files); under <UUID> there's a common\rr.log with:
Sun May 22 01:56:39 2011 RescueRecovery: Running: C:\Program Files (x86)\Lenovo\
Rescue and Recovery\br_funcs.exe backup level=0 destination="\\192.168.0.1\W510_
backup\RRbackups\SZ\D0D186C05DAE11E0-9303F5C431248DAC" drive=C: location=16 nice
=0 pw=0 uuid=0 compress encrypt
Sun May 22 02:04:15 2011 RescueRecovery: br_funcs returned error code 0x501
Sun May 22 02:04:15 2011 RescueRecovery: Running: C:\Program Files (x86)\Common
Files\Lenovo\mnd\mapdrv.exe *
Sun May 22 02:04:15 2011 RescueRecovery: Get the shutdown flag from service is 0
Sun May 22 02:04:48 2011 RescueRecovery: CRRBackup::removeLevel() - DeleteFile(\
\192.168.0.1\W510_backup\RRbackups\SZ\D0D186C05DAE11E0-9303F5C431248DAC\common\b
t0.dat) failed. Error 3
Sun May 22 02:04:48 2011 RescueRecovery: In GetBackupFolderName, UUID is D0D186C
05DAE11E0-9303F5C431248DAC!
Sun May 22 02:04:48 2011 RescueRecovery: In CreateSpecialBackupFolder, get szBackupFolder is C:\RRbackups\SZ\D0D186C05DAE11E0-9303F5C431248DAC
Sun May 22 02:04:48 2011 RescueRecovery: CreateSpecialBackupFolder: szBackupFolder= C:\RRbackups, szMidiumFolder = C:\RRbackups\SZ
The events don't make sense:
a) Why would RR says "network location can no longer be reached" - the wording suggests that it was OK, but now it isn't.
b) The br_funcs returns Error 0x501 (NOT_IMPLEMENTED or NOT_SUPPORTED), but RR still attempted to call mapdrv.
c) Apparently mapdrv was successful otherwise it shouldn't try to delete the t0.dat on the shared drive (which didn't exist - hence Error 3 (PATH_NOT_FOUND)) and unless it has reached the remote computer, it wouldn't know the file wasn't there.
I'm curious to find out if anyone has run into this problem and how to fix it.

It errored out after it has already created some folders and files as indicated in the first post.Tried the same steps several times just make sure it was repeatable by closing Rescue and Restore app and starting it again. The network between the share host and my W510 was a direct RJ45 cable connection, so zero hop. In the end I used Windows 7 Backup and Restore to do full backup, using the same \\server\sharename, the network share was mapped without a problem. But then Windows 7 Restore CD wasn't able to map network share - giving me 0x800704cf. Googling shows lots questions raised on this but no fix.
Update:
Last night, I gave it a shot again. For some reason, RR was able to mapped the network share using \\IPaddress\sharename (this time I used a different folder and a diferent sharename). OK great, but after 10 hrs it's at 88% completion, did my math, estimated elasped time is 12 hrs, Wow! The image backup with Windows 7 Backup took 5 hr 51 min with 132GB in the WindowsImageBackup folder. RR is 2x slower!
On the other hand, as it's still running, the est. backup folder size is 106GB. RR does a better job in compression - a 20% reduction in size compared with Windows' at the cost of 2x time.
Going back to the Windows 7 Restore CD 0x80704cf error when mapping the network share, found an Internet user posting that he succeede by providing a NIC driver.

Rescue and Recovery 4.52 - Makes Full Image Backups?

So, this may seem like a simple question to some, but I can not find a conclusive answer yet.
I have Lenovo's Rescue and Recovery 4.52 - Windows 7 (64 bit) for my Lenovo T540. Will Rescue and Recovery 4.52 create a full image backup such that if in the event my hard drive crashes, I can reinstall the entire operating system, programs, etc at one time, without having to reinstall individual software programs?
I just don't want to install Rescue and Recovery 4.52 because it is a large program, without it being able to do a full image backup.
Thanks

In my personal opinion, Rescue and Recovery is obselete. For Win7 and later, my advice is to use Windows built-in backup and restore. You can create both a complete system image (what you are asking about), and also backup individual files/folders in your libraries.
http://windows.microsoft.com/en-us/windows7/products/features/backup-and-restore
Rescue and Recovery was great for XP and earlier OS when there wasn't any built-in backup and restore functions. But for Win7 and later, my advice is to use the OS built-in feature. Hope this helps.

Rescue and Recovery with T40 booting the system (XP) without restoring factory configuration

(plus bas en français)
Hi,
I've a T40 which I want to restore the factory configuration.
I've installed the up-to-date version of Rescue and Recovery but :
- when launching Rescue & Recovery from XP, it does not offer to restore the factory configuration
- at least, this is feasible when I press the "Access IBM" blue button when starting the computer...
- ... even if factory configuration restore is available there, it does not work. Indeed, it asks me to confirm and then starts the computer again without restoring anything.
Can someone help me please ?
Bonjour,
J'ai un T40 pour lequel je souhaite restaurer la configuration usine.
J'ai installé la toute dernière version de Rescue and Recovery mais :
- quand je lance Rescue & Recovery depuis XP, je n'ai pas la possibilité de restaurer la configuration usine.
- à la rigueur, c'est pas grave car quand j'appuie sur le bouton bleu "Access IBM" lors du démarrage du pc, Rescue & Recovery me propose de restaurer la configuration d'usine... mais ne fonctionne pas. En effet, après avoir confirmé l'opération, le système redémarre et lance XP sans avoir restaurer quoi que ce soit.
Quelqu'un peut m'aider svp ?

hey sylvain,
for the Rescue and Recovery to work, did you make a backup of the system via recovery media ?
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Can't burn recovery disc.. using Rescue and Recovery

Hi, I want to try new Windows 7 on my T61 (7659-A55).
so i tried to make product recovery discs, but it gives me error that process is failed. (Cannot go back to the factory setting right now...)
My CD/DVD RW works fine and i even tried to use differen version of Rescue and Recovery..
How can I get the recovery discs??

amitie92 wrote:
so i tried to make product recovery discs, but it gives me error that process is failed. (Cannot go back to the factory setting right now...)
How can I get the recovery discs??
When I had problems creating recovery media for my T60p I called Lenovo to ask for assistance. After giving the CSR a description of the errors I was encountering and what I tried to do about them, he decided it would be easier for both of us if Lenovo sent me a set of media. YMMV.
Cheers... Dorian Hausman
X1C2, TPT2, T430s, SL500, X61s, T60p, A21p, 770, 760ED... 5160, 5150... S360/30

Rescue and Recovery not recognizing USB DVD writer on X200

I have a SAMSUNG SE-S084B USB CD/DVDRW that reads/burns DVD-R ok in ImgBurn. I already have backup made on the hard drive by RR.
I tried to use the Rescue and Recovery Advanced mode -> menu-Advanced -> "Copy backup from hard drives" to make a set up of backup on the DVD-Rs. However, RR doesn't recognize my USB DVD writer, and therefore I cannot proceed the backup.
Please advise how to make backups on a DVD for Thinkpad X200. Thanks a lot!

I got it!
You just need to be patient. It can take up to two hours.
I wasted about 30 minutes in the fine quality customer support of inner-city Atlanta just to be told it takes that long. 30 minutes.
I am extremely unimpressed with Atlanta customer service, and the rep's advice after 25 minutes was that he was going to send me a couple more recovery disks! He had no idea about anything I was talking about. I complained to the manager who finally told me to just wait. However when I complained to him he thought it was a joke.
Customer service in Lenovo, especially their Atlanta location is a farce. You're welcome for me having to sit through that.

Rescue and Recovery 4 DOES NOT RESCUE/COPY LARGE FILES?!

Hello all,
Thank you in advanced for helping me out/any helpful advice you may have.
System:
Windows XP Professional
T61
4 GB RAM
2.50 Ghz Dual Core Intel Processor
120 GB Hard Drive
140m nVidia Quadro video card (256 MB available memory I believe)
Problem Summary:
I ran into the unlucky computer problem of having a Microsoft.net framework addon for Firefox 3.5.3 result in a fatal interaction leaving me unable to boot up in both safe and normal mode. If you do have this addon, please uninstall it NOW, so that it does not happen to you. There is no current fix or patch for it as far as I know. Luckily, I have the (formerly) fantastic Rescue and Recovery 4 to backup my files and fix things.
So in sequence of what I did:
Tried several different attempts to fix problem to no avail (via google searches on the Rescue and Recovery Browser)
Decided that it would be best to just reformat the drive and start a clean install.
I had not done a real back up recently (several months due to my own carelessness and being busy).
I chose to do a full factory restore using the 'Rescue My Files' option, since I had never done a backup using the included Lenovo Software, I usually just ran my own manual ones in Windows.
To be on the safe side, I just decided to transfer my entire hard drive directory 'C:' to my 500 GB External Western Digital Hard Drive. I know I didn't really NEED all the files (like program files I would just need to reinstall anyway). I just wanted to return my computer to how it was as fast as possible.
Rescue and Recovery registered as copying all my data (rougly 50-60 GB) of data to my external USB Hard Drive.
I then unplugged my External USB Drive From the computer once it said it was complete. Rescue and Recovery proceeds with the factory restore.
Things are going well, factory restore is successful, no problems yet.
Once Windows was functional again and I had remade my usernames and settings just as it was before the crash, I plugged in my External HD again to restore my files.
Every file that I copied was there EXCEPT FOR MY MOST IMPORTANT ONES. It appears the directory, 'C:\Documents and Settings\Justin\My Documents'
AND
'C:\Documents and Settings\Justin\Desktop'
DID NOT COPY. I DID A DOUBLE CHECK, and the program said that all files had transferred successfully and I saw the directories on the USB Hard Drive in the Rescue and Recovery View. (I did not do a double check on another windows computer with my USB Hard Drive, however as I did not have access to one at the time and I was trusting in the Lenovo software, which did actually manage to rescue all the files, except for my most important ones.)
Is there anyway way that:
That because these files were so large (probably account for 50% of all data copied to my external USB Drive or 10-15 GB a piece), that the Rescue and Recovery file simply "passed over them"? The other files appeared to copy perfectly fine.
There was an error with the program, like a file size limit cap that Rescue and Recovery cannot surpass so they were just skipped over?
My own carelessness? Are all the root files not selected when you choose the entire 'C:' Drive as a directory? I did just choose to copy/rescue the entire 'C:' Drive and everything else (besides my two most important files) seemed to copy over so I do not beleive that this is the case.
I did not individually, select each file in the 'C:\Documents and Settings' because I assumed that it would select each of the root files within it. (Is that not the case?)
That the files are 'hiding' somewhere due to their large size?
Most importantly of all:
IS THERE ANYWAY THAT I CAN RECOVER MY DATA? There is about 2 years worth of photos, music, documents, etc. that I would like to have back that I do not have a recent back up of.
If anything, does anyone know WHY this happened? It was my understanding that Lenovo Rescue and Recovery was some of the best software for emergency crashes out there. And now it has failed me miserably. I'd at least like to know why it happened so that I may not repeat my mistake (or put too much faith in Lenovo) for the future.
I've run some data recovery software but I know it will not recovery all the files that I once had in their state before my hard drive was reformatted back to factory settings.
Thank you,
-nofeet3
Justin

Hello , and ARGH !
I AM HAVING THE EXACT SAME PROBLEM RIGHT NOW !
If anybody could help this would really be appreciated .
Here is the story
Lenovo SL500
Windows XP SP3 I think
Specs maybe not too important
My computer has some corrupted file and will not boot in normal or safe mode . When I try to do either , it starts booting , but before it finishes the load-up-windows screen , it displays an error message which says
" lsass.exe - System Error
the endpoint format is invalid "
and then goes no further , and the machine simply restarts itself again and would do this indefinitely if I didn't stop it .
SO when it starts booting and shows the Lenovo Logo , I press the Lenovo Help/Tool Button to enter Rescue and Recovery [not sure what version it is , I cannot find information within it] and it gives me the option to Rescue files before recovering the system . I have the same problem as Nofeet3.
It rescues all the small files
BUT WILL NOT RESCUE ANY OF MY IMPORTANT FILES
CERTAINLY IT DOES NOT RESCUE ANYTHING BIG [or bigger than roughly 2mb]
It rescues picture files BUT WILL NOT RESCUE MUSIC FILES !!
It may not even rescue bigger picture files , but I haven't noticed any pictures it has not copied since I can't go through ALL my picture files to see exactly what it has / hasn't copied.
However , not a single music file is copied.
It will NOT show up on the hard drive . What is strange , is when I try to plug the hard drive back in to try and copy the music files again , as I tried it a few times , it asks me if I would like to Write these files over the files already there , as though it has already copied. I check the hard disk , and these fils have definitely NOT copied onto the Disk . They are nowhere to be found .
I don't think the files are hiding , but if they are , maybe somebody could tell me where.
I suspect though that Rescue and Recovery has "recorded" the files as having been copied , some kind of record , EVEN THOUGH THEY HAVEN'T !! Or if they have , they are absolutely invisible . WEIRD !
nofeet3
It is NOT because you selected the whole C drive , and is not due to any carelessness on your part. I have selected all files individually , and have tried time and time and time again , when I plug the ext hard drive into my other laptop to see if the files copy , they don't . I have tried this over and over and over again desperately all today , it is not working , even going so far as to select individual files rather than bigger directories to try and transfer in smaller in smaller batches ,just in case it couldn't handle large transfers all at once . That is not the case either . It just simply will not transfer files roughly bigger than 2mb . NO MUSIC !! THIS IS VERY FRUSTRATING !!
I am not sure at present whether this program can rightly be called "Rescue and Recover". It is one of the main reasons I selected Lenovo , and this is not a good demonstration of it's abilites at all .
PLEASE HELP ME !!
ANY HELP WOULD BE HIGHLY APPRECIATED !!
Thanks so much in advance for any help anybody can give , and best regards ,
Carl .

Rescue and Recovery: No backups available for "local hard drive" with Full Restore

I can see all my backups in "view all backups" and can restore individual files, although when I select the option for "full restore", it reboots my PC and brings up the Rescue and Recovery interface which gives me the option for "full restore". When I select "full restore", it asks me to select the source.
As my backups are stored on my local hard drive, I select that source, however the scroll box is empty (no backups available for selection).
Can anyone recommend a solution to fix this problem, or should I remove and re-install Rescue and Recovery, then create new backups (and hope they appear in the list for full restore)?
I am running Rescue and Recovery 4.21.0016.00 on a Lenovo T61p with XP SP3.
Thanks.
Gary Grathen

Also, I have RnR 4.00.0117.00.
Where do I find and how do I delete these massive files?
Note from Moderator: Please update your profile with your correct country location as per the forum rules. Products, options and services vary from market to market. Knowing your location helps us help you.
Message Edited by nonny on 04-24-2008 02:15 PM

Rescue And Recovery On Clean Install Of Windows XP Service Pack 2

Hey,
I have recently purchased a refurbised IBM ThinkPad T40 2373-82M laptop computer. When I received the computer it did not have any recovery partition or recovery CD's that came with it. I then installed my own personal copy of Windows XP Service Pack 2 on the machine and installed drivers and applications individually by downloading them off the Lenovo support website. However, I have attempted to install the latest version of the ThinkVantage Rescue And Recovery Program (Version 4.20) on my computer but I end up with the following error: 'There is not enough free space on the computer to install or upgrade the Rescue and Recovery environment'. When I did a full clean install on the system I deleted all partitions that were on the computer at the time during the Windows XP installation and made a single NTFS partition. There were two 20GB partitions on the hard drive when I bought it, but neither of them were the IBM Rescue and Recovery partition. Could it be possible for me to install this software on my laptop, and make a Rescue and Recovery partition, now and make it the same way it would of been when it left the IBM factory?
Any help would be greatly appreciated.
Cheers
Ash.

asin123 wrote:
I hope this solution is easy to follow and helps anyone who has had the same problems as me.
Thanks for coming back and sharing the solution with others!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Jane
2015 X1 Carbon, ThinkPad Slate, T410s, X301, X200 Tablet, T60p, HP TouchPad, iPad Air 2, iPhone 5S, IdeaTab A2107A, Yoga Tablet, Yoga 3 Pro
I am not a Lenovo Employee.
I AM one of those crazy ThinkPad zealots!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

Rescue And Recovery Installation On Clean Install Of Windows XP Service Pack 2

Hey,
I have recently purchased a refurbised IBM ThinkPad T40 2373-82M laptop computer. When I received the computer it did not have any recovery partition or recovery CD's that came with it. I then installed my own personal copy of Windows XP Service Pack 2 on the machine and installed drivers and applications individually by downloading them off the Lenovo support website. However, I have attempted to install the latest version of the ThinkVantage Rescue And Recovery Program (Version 4.20) on my computer but I end up with the following error: 'There is not enough free space on the computer to install or upgrade the Rescue and Recovery environment'. When I did a full clean install on the system I deleted all partitions that were on the computer at the time during the Windows XP installation and made a single NTFS partition. There were two 20GB partitions on the hard drive when I bought it, but neither of them were the IBM Rescue and Recovery partition. Could it be possible for me to install this software on my laptop, and make a Rescue and Recovery partition, now and make it the same way it would of been when it left the IBM factory?
Any help would be greatly appreciated.
Cheers
Ash.
Message Edited by asin123 on 04-04-2008 10:45 PM
Moderator Note; Please do not duplicate posts - Thread locked.
Message Edited by andyP on 04-04-2008 02:11 PM

asin123 wrote:
I hope this solution is easy to follow and helps anyone who has had the same problems as me.
Thanks for coming back and sharing the solution with others!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Jane
2015 X1 Carbon, ThinkPad Slate, T410s, X301, X200 Tablet, T60p, HP TouchPad, iPad Air 2, iPhone 5S, IdeaTab A2107A, Yoga Tablet, Yoga 3 Pro
I am not a Lenovo Employee.
I AM one of those crazy ThinkPad zealots!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

Rescue and Recovery 4.31 - How to make backup for 2nd hard disk drive?

Similar Messages

Maybe you are looking for