Rescue and Recovery Capability to recover other operating systems

Hello Folks,
I have a question regarding R&R. I have a thinkpad T520 running windows 7. It came with a 500GB hdd and I allocated 50GB of that to a Linux system. I bought a 1 TB HDD and would like to replace the one inside, and this brings me to my question;
*Does the R&R tool take a complete image of my hdd, meaning if I was to recover my backup to a new hdd, would I be able to access my Linux installation and all the files in that partition as well, or is it specific to the windows system only.
*If the above is indeed not possible, is there a way to change my settings on R&R to do it or do I have to resort to another paid 3rd party software to do that for me.
Please help as I can't afford to lose anything on the Linux system as I need it for research.
Thanks in advance,
Solomon

Hello and welcome,
I can't answer directly so apologies for crashing your thread. I'd be very surprised if R&R recognized anything but windows-flavored partitions. I don't have one of my old multi-boot ThinkPads at hand to test or I would.
IIRC backup is one of the reasons I finally gave up on multi-boot and went to a pure Windows setup running Linux and Solaris as virtual machines. It makes for a very simple backup process.
Having said that, I actually use Acronis for backup. It can handle multi-OS backups but in my experience I always had to repair the Linux partition after a restore.
Is the virtual machine approach something that would work for you? If not you might use one of the Linux backup approaches to save that partition separately.
Regards,
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Similar Messages

Rescue and Recovery, restoring files from a vista system to a new Windows 7 system.

I had been using rescue and recovery to back up the system on my Thinkpad X300, up until a few months ago. The OS was vista, and I have since upgraded to Windows 7. Yesterday, my laptop was stolen, and have lost a good amount of important data. Before I go shelling out $$$ for a new thinkpad, My question is, will I be able to use Rescue and Recovery on a Windows 7 system for files that were backed up on a system running vista?

mottowa2, welcome to the forum,
sorry to hear your ThinkPad was stolen, not a nice thing to happen
I think the important factor is how / where you have saved your R&R backups. I'm guessing you copied them to other media?
On the download site for R&R v.4.3, which is only compatible with W7, it states;
If you want to retain the ability to restore from backups created with a previous version of Rescue and Recovery, you must create a copy of your backup files on bootable, external recovery media before installing the latest version.
To archive your backups, complete the following procedure:
From the Rescue and Recovery main screen, click Backup, and then select Copy backups from hard drive from the drop-down list.
Select the medium you want to save your backup files to by clicking the appropriate radio button. The backup files that will be copied are listed on the user interface.
Click OK to continue
2. You will need blank removable media when copying backups from the hard drive to CD or DVD. Make sure that you label each disc as it is created, and that you store them together in a safe place.
Note: You will be prompted to make the external media bootable at the beginning of the process.
I believe, and sincerely hope, that all may not be lost.
Let us know
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Rescue and Recovery 4 and X31 HPA Restore Your Backups

Good morning!
Installed a new hard drive on my X31. I used a purchased set of official restore media to do a clean install of Windows XP with the HPA Predesktop Area in place.
Two weeks later all of my Windows and ThinkPad updates are complete and I am ready for a clean backup.
I installed Rescue and Recovery 4.23 and after a false start, I successfully made a backup to a USB Hard Drive that will boot into ThinkVantage Rescue and Recovery. The Windows software seems to be fully functional.
On normal bootup, however, if I use F11 or the Access IBM button, I am taken to the original Predesktop HPA interface -- so the partition is really there. The Factory Restore appears to now be functioning if I ever wanted to use it.
My problem (or questions) relates to the "Restore Your Backups" icon. When I select it, I get the message: "IBM Rapid Restore PC is not installed. Press the enter key to reboot to Windows and install IBM Rapid Restore PC."
Therefore, that portion of the HPA is not accessible.
And, therefore, other than a factory restore, there is no way to run restore from the HPA.
So, here are my questions:
1. Is there anyway to put the Rescue and Recovery 4 predesktop area in this HPA?
2. If so, would it wipe out the Factory Restore option?
3. Should I have made at least one backup with "IBM Rapid Restore PC" before the "Rescue and Recovery 4" installer removed it?
4. Is there any space on the HPA I can recover?
5. Is there a tool or method to delete the "Restore Your Backups" icon if it is non-functional?
This may all seem not that important but I do care about this awesome X31 and I really would like to know how all of these competing technologies interface with each other.
Thanks for any help.,
Charlie

> ... it does not support X30 or X31, this could be part of the problem.
It also says that it *** may *** work on other systems. My experience is that if the IBM/Lenovo software supports the X32 (and RNR4 does), then it will work just fine on the X31 (example: Access Connections; exceptions: drivers that are specific to the very few hardware differences like CDC daughter cards -- Bluetooth).
The existing version was uninstalled and it was "way older" than what is covered in those special instructions (thanks, I did check it out -- no directory or utility present).
This is probably the end point for me -- good advice: "If that does not work, and if R&R under Windows works, you might create Recovery media and then boot from that if you want to restore from backups."
So, here is one new idea and one new confusion:
The last "official" RNR that supports the X31 was version 3.1 but it contains this somewhat cryptic (to me) caveat:
Consideration 12
computers that have a hidden protected area (HPA), also referred
to as PARTIES, and have the Rescue and Recovery program installed
will not be able to boot into either the PARTIES or Rescue and
Recovery workspace after recovering the original factory contents.
To enable the PARTIES area again, restore a backup using either the
Rescue and Recovery program in the Windows environment or by booting
from rescue media and then uninstall the Rescue and Recovery program.
My thought: Should I uninstall RNR4, install RNR3.1, and then upgrade to RNR4?
My confusion: There are apparently two types of predesktop areas: HPA and Type 12.
Do RNR3 and RNR4 only use Type 12? If so, can it coexist with the HPA, can it replace the HPA on its own, or do RNR3 and RNR4 not install the Type 12 space nor update the HPA if the installer finds an intact HPA?
To recap, what I have now is an HPA as it would have existed in 2004. I have a working RNR4 in Windows. The Access IBM button and F11 boot to the HPA. What I would like is an RNR4 predesktop area that can do a factory restore.
Any more help would be greatly appreciated!
Thanks,
Charlie

Problems with Rescue and recovery

Hi,
I have a T500 (2082 52G) with XP running. Having had problems with some software I tried to use Rescue and Recovery 4 to recover from an earlier backup. However, the Recovery still is at 0 % after 3 hours. Do I have an opportunity to shut down the system or cancel the recovery without crashing anything? I read "Dont shut down during the process" at the beginning. As I am business user it is _most_ important not to loose any data.
Any reply is much appreciated!
Regards,
Peter

Hi,
any advice please ?
thx

Can the rescue and recovery function be infect with a trojan virus?

I had some trouble with trojan viruses. My scan software detected malware on my system which I deleted with the help of the antivirus software antivir (free version) and with the software malwarebytes.
My thinkpad r51 is still running and virus scans do not show any problems any more. But I am not quite sure if I can trust the scans. So I am thinking about to format the harddisk and setup a new system. Or to use the rescue and recovery function which says that the system will be put back to its initial state. Is it really possible to bring the system back to its original state with help of rescue and recovery? ? I am a little bit afraid that the rescue and recovery function might be infected too? How does the function work? Can the system really be put back to its original state?
Any help appreciated, thanks!
Tom
Solved!
Go to Solution.

Hi,
if you have a virus on your system, then there is a realy small chance, that the virus got also into the Service Partition.
So in this situation if you want to restore the system , then after the restore finish, the virus should surely be gone.
Service partition is a protected partition, which content can not be accessed just like that .
Rgrds

Rescue and recovery not working

I wiped my hard drive and installed Ubuntu. Now I need Vista back to use some testing software for my state bar exam. Rescue and Recovery discs as well as f11 system restore keep giving me a startup error. Is Vista gone for good? Lenovo wants to charge me $45 to send discs that will work. Can get an an .iso for this version (Vista Business 64 SP1, I think) somewhere and use my product activation key on the bottom of the PC? I don't have time to search the forums and i'm not really an expert. Please help.
Solved!
Go to Solution.

http://www.mydigitallife.info/2009/04/29/windows-vista-with-sp2-rtm-slipstreamedintegrated-dvd-iso-i...
something here should work for you.
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Recovering backup data from a previous version of Rescue and Recovery

Dear All,
can you please advice how can I restore the system&data (Windows 7)
I created recovery CDs and did the full backup (USB drive)
I changed disk (diagnostic reported warnings for the old one)
I recovered system from CD
I wanted to recover full backup/image from USB drive, however
after reboot R&R 4 starts and error message "... backup taken with previous version..." is displayed.
I wanted to recover single file (R&R 4.31) from USB drive, however
error message "The list box identifierwas not found" is displayed
What shall I do? upgrade R&R to 4.51? downgrade R&R to 4 (where are downloads)? something else? what R&R versions exist for W7?
thanks in advance.

Thank you for coming back to my issue.
Creation date of \RRbackups: Jun 11, 2013
USB backup is Win7 backup.
What shall I look for in folder\rr.log? I am copying here the last unsuccesful recovery attempt>
Mon Jun 17 23:38:32 2013 RescueRecovery: In GetBackupFolderName, get local UUID!
Mon Jun 17 23:38:32 2013 RescueRecovery: loadBackups() - will check file m_iLocation=1, szBackups=C:\RRbackups\SZ\816B916B3551CB11-818F8F29B139CFE8\common\backups.dat
Mon Jun 17 23:38:32 2013 RescueRecovery: loadBackups() - deleteRegistryKey SOFTWARE\Lenovo\Rescue and Recovery\Backups\Local, C:\RRbackups\SZ\816B916B3551CB11-818F8F29B139CFE8\common\backups.dat
Mon Jun 17 23:38:32 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:36 2013 RescueRecovery: Running: C:\Program Files (x86)\Lenovo\Rescue and Recovery\rrstrigger.exe -start
Mon Jun 17 23:38:37 2013 RescueRecovery: Getting GUI mask is 16
Mon Jun 17 23:38:38 2013 RescueRecovery: Running: C:\Program Files (x86)\Lenovo\Rescue and Recovery\rrstrigger.exe -start
Mon Jun 17 23:38:39 2013 RescueRecovery: OnInitDialog on Parent Panel and the nCount is 0
Mon Jun 17 23:38:39 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:39 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:39 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:39 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:39 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:39 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:39 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:39 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:39 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:39 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:39 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:39 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:39 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:39 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:39 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:39 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:39 2013 RescueRecovery: In GetBackupFolderName, get local UUID!
Mon Jun 17 23:38:39 2013 RescueRecovery: In GetBackupFolderName, get local UUID!
Mon Jun 17 23:38:39 2013 RescueRecovery: ClientGetSecondDiskInfo nSize=10
Mon Jun 17 23:38:39 2013 RescueRecovery: ServiceGetSecondDiskInfo nSize=10
Mon Jun 17 23:38:39 2013 RescueRecovery: ServiceGetSecondDiskInfo can not get RR_REGKEY_BACKUP_SECOND_DRIVE_SER_NUM=BackupSecondDriveSerNum
Mon Jun 17 23:38:39 2013 RescueRecovery: Enter FindLocalDrive
Mon Jun 17 23:38:40 2013 RescueRecovery: winGetDriveData find a (usb)
Mon Jun 17 23:38:42 2013 RescueRecovery: GetSecondBackupfolder iBackupDrive=-1 via FindSecondDrive
Mon Jun 17 23:38:44 2013 RescueRecovery: ClientGetSecondDiskInfo nSize=10
Mon Jun 17 23:38:44 2013 RescueRecovery: ServiceGetSecondDiskInfo nSize=10
Mon Jun 17 23:38:44 2013 RescueRecovery: ServiceGetSecondDiskInfo can not get RR_REGKEY_BACKUP_SECOND_DRIVE_SER_NUM=BackupSecondDriveSerNum
Mon Jun 17 23:38:44 2013 RescueRecovery: Enter FindLocalDrive
Mon Jun 17 23:38:44 2013 RescueRecovery: winGetDriveData find a (usb)
Mon Jun 17 23:38:47 2013 RescueRecovery: GetSecondBackupfolder iBackupDrive=-1 via FindSecondDrive
Mon Jun 17 23:38:48 2013 RescueRecovery: winClientIsUSBDrive begin
Mon Jun 17 23:38:48 2013 RescueRecovery: winClientIsUSBDrive 1
Mon Jun 17 23:38:48 2013 RescueRecovery: Get USB Drive message
Mon Jun 17 23:38:48 2013 RescueRecovery: winClientIsUSBDrive 2
Mon Jun 17 23:38:48 2013 RescueRecovery: winClientIsUSBDrive begin
Mon Jun 17 23:38:48 2013 RescueRecovery: winClientIsUSBDrive 1
Mon Jun 17 23:38:48 2013 RescueRecovery: Get USB Drive message
Mon Jun 17 23:38:49 2013 RescueRecovery: winGetDriveData find a (usb)
Mon Jun 17 23:38:49 2013 RescueRecovery: Get USB Drive message(winServiceIsUSBDrive)
Mon Jun 17 23:38:49 2013 RescueRecovery: winClientIsUSBDrive 2
Mon Jun 17 23:38:49 2013 RescueRecovery: In GetBackupFolderName, get local UUID!
Mon Jun 17 23:38:49 2013 RescueRecovery: D:\RRbackups\SZ\816B916B3551CB11-818F8F29B139CFE8
Mon Jun 17 23:38:49 2013 RescueRecovery: In GetBackupFolderName, get local UUID!
Mon Jun 17 23:38:49 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:49 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:49 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:49 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:49 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:49 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:53 2013 RescueRecovery: Set LOCAL to UUID and reload backup before delete backup!
Mon Jun 17 23:38:53 2013 RescueRecovery: In GetBackupFolderName, get local UUID!
Mon Jun 17 23:38:53 2013 RescueRecovery: loadBackups() - will check file m_iLocation=1, szBackups=C:\RRbackups\SZ\816B916B3551CB11-818F8F29B139CFE8\common\backups.dat
Mon Jun 17 23:38:53 2013 RescueRecovery: loadBackups() - deleteRegistryKey SOFTWARE\Lenovo\Rescue and Recovery\Backups\Local, C:\RRbackups\SZ\816B916B3551CB11-818F8F29B139CFE8\common\backups.dat
Mon Jun 17 23:38:53 2013 RescueRecovery: ServiceGetSecondDiskInfo nSize=10
Mon Jun 17 23:38:53 2013 RescueRecovery: ServiceGetSecondDiskInfo can not get RR_REGKEY_BACKUP_SECOND_DRIVE_SER_NUM=BackupSecondDriveSerNum
Mon Jun 17 23:38:53 2013 RescueRecovery: Enter FindLocalDrive
Mon Jun 17 23:38:53 2013 RescueRecovery: winGetDriveData find a (usb)
Mon Jun 17 23:38:53 2013 RescueRecovery: GetSecondBackupfolder iBackupDrive=-1 via FindSecondDrive
Mon Jun 17 23:38:55 2013 RescueRecovery: loadBackups() - will check file m_iLocation=32, szBackups=\common\backups.dat
Mon Jun 17 23:38:55 2013 RescueRecovery: loadBackups() - can't found file m_iLocation=32, szBackups=\common\backups.dat
Mon Jun 17 23:38:55 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:55 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:55 2013 RescueRecovery: In GetBackupFolderName, get local UUID!
Mon Jun 17 23:38:55 2013 RescueRecovery: ClientGetSecondDiskInfo nSize=10
Mon Jun 17 23:38:55 2013 RescueRecovery: ServiceGetSecondDiskInfo nSize=10
Mon Jun 17 23:38:55 2013 RescueRecovery: ServiceGetSecondDiskInfo can not get RR_REGKEY_BACKUP_SECOND_DRIVE_SER_NUM=BackupSecondDriveSerNum
Mon Jun 17 23:38:55 2013 RescueRecovery: Enter FindLocalDrive
Mon Jun 17 23:38:56 2013 RescueRecovery: winGetDriveData find a (usb)
Mon Jun 17 23:38:56 2013 RescueRecovery: winGetDriveData find a (usb)
Mon Jun 17 23:38:56 2013 RescueRecovery: In GetBackupFolderName, get local UUID!
Mon Jun 17 23:38:56 2013 RescueRecovery: D:\RRbackups\SZ\816B916B3551CB11-818F8F29B139CFE8
Mon Jun 17 23:38:56 2013 RescueRecovery: loadBackups() - will check file m_iLocation=8, szBackups=D:\RRbackups\SZ\816B916B3551CB11-818F8F29B139CFE8\common\backups.dat
Mon Jun 17 23:38:56 2013 RescueRecovery: loadBackups() - deleteRegistryKey SOFTWARE\Lenovo\Rescue and Recovery\Backups\USB, D:\RRbackups\SZ\816B916B3551CB11-818F8F29B139CFE8\common\backups.dat
Mon Jun 17 23:38:58 2013 RescueRecovery: GetSecondBackupfolder iBackupDrive=-1 via FindSecondDrive
Mon Jun 17 23:38:59 2013 RescueRecovery: winClientIsUSBDrive begin
Mon Jun 17 23:38:59 2013 RescueRecovery: winClientIsUSBDrive 1
Mon Jun 17 23:38:59 2013 RescueRecovery: Get USB Drive message
Mon Jun 17 23:38:59 2013 RescueRecovery: winClientIsUSBDrive 2
Mon Jun 17 23:38:59 2013 RescueRecovery: winClientIsUSBDrive begin
Mon Jun 17 23:38:59 2013 RescueRecovery: winClientIsUSBDrive 1
Mon Jun 17 23:38:59 2013 RescueRecovery: Get USB Drive message
Mon Jun 17 23:39:00 2013 RescueRecovery: winGetDriveData find a (usb)
Mon Jun 17 23:39:00 2013 RescueRecovery: Get USB Drive message(winServiceIsUSBDrive)
Mon Jun 17 23:39:00 2013 RescueRecovery: winClientIsUSBDrive 2
Mon Jun 17 23:39:00 2013 RescueRecovery: In GetBackupFolderName, get local UUID!
Mon Jun 17 23:39:00 2013 RescueRecovery: D:\RRbackups\SZ\816B916B3551CB11-818F8F29B139CFE8
Mon Jun 17 23:39:00 2013 RescueRecovery: In GetBackupFolderName, get local UUID!
Mon Jun 17 23:39:00 2013 RescueRecovery: ClientGetSecondDiskInfo nSize=10
Mon Jun 17 23:39:00 2013 RescueRecovery: ServiceGetSecondDiskInfo nSize=10
Mon Jun 17 23:39:00 2013 RescueRecovery: ServiceGetSecondDiskInfo can not get RR_REGKEY_BACKUP_SECOND_DRIVE_SER_NUM=BackupSecondDriveSerNum
Mon Jun 17 23:39:00 2013 RescueRecovery: Enter FindLocalDrive
Mon Jun 17 23:39:01 2013 RescueRecovery: winGetDriveData find a (usb)
Mon Jun 17 23:39:03 2013 RescueRecovery: GetSecondBackupfolder iBackupDrive=-1 via FindSecondDrive
Mon Jun 17 23:39:04 2013 RescueRecovery: winClientIsUSBDrive begin
Mon Jun 17 23:39:04 2013 RescueRecovery: winClientIsUSBDrive 1
Mon Jun 17 23:39:04 2013 RescueRecovery: Get USB Drive message
Mon Jun 17 23:39:05 2013 RescueRecovery: winClientIsUSBDrive 2
Mon Jun 17 23:39:05 2013 RescueRecovery: winClientIsUSBDrive begin
Mon Jun 17 23:39:05 2013 RescueRecovery: winClientIsUSBDrive 1
Mon Jun 17 23:39:05 2013 RescueRecovery: Get USB Drive message
Mon Jun 17 23:39:05 2013 RescueRecovery: winGetDriveData find a (usb)
Mon Jun 17 23:39:05 2013 RescueRecovery: Get USB Drive message(winServiceIsUSBDrive)
Mon Jun 17 23:39:05 2013 RescueRecovery: winClientIsUSBDrive 2
Mon Jun 17 23:39:05 2013 RescueRecovery: In GetBackupFolderName, get local UUID!
Mon Jun 17 23:39:05 2013 RescueRecovery: D:\RRbackups\SZ\816B916B3551CB11-818F8F29B139CFE8
Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:39:05 2013 RescueRecovery: OnPaint on Parent Panel and the nCount is 0
Mon Jun 17 23:39:09 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:39:09 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:39:12 2013 RescueRecovery: winClientIsUSBDrive begin
Mon Jun 17 23:39:12 2013 RescueRecovery: winClientIsUSBDrive 1
Mon Jun 17 23:39:12 2013 RescueRecovery: Get USB Drive message
Mon Jun 17 23:39:12 2013 RescueRecovery: winClientIsUSBDrive 2
Mon Jun 17 23:39:12 2013 RescueRecovery: winClientIsUSBDrive begin
Mon Jun 17 23:39:12 2013 RescueRecovery: winClientIsUSBDrive 1
Mon Jun 17 23:39:12 2013 RescueRecovery: Get USB Drive message
Mon Jun 17 23:39:13 2013 RescueRecovery: winGetDriveData find a (usb)
Mon Jun 17 23:39:13 2013 RescueRecovery: Get USB Drive message(winServiceIsUSBDrive)
Mon Jun 17 23:39:13 2013 RescueRecovery: winClientIsUSBDrive 2
Mon Jun 17 23:39:13 2013 RescueRecovery: In GetBackupFolderName, get local UUID!
Mon Jun 17 23:39:13 2013 RescueRecovery: D:\RRbackups\SZ\816B916B3551CB11-818F8F29B139CFE8
Mon Jun 17 23:39:13 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:39:13 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:39:15 2013 RescueRecovery: In GetBackupFolderName, get local UUID!
Mon Jun 17 23:39:16 2013 RescueRecovery: winGetDriveData find a (usb)
Mon Jun 17 23:39:16 2013 RescueRecovery: In GetBackupFolderName, get local UUID!
Mon Jun 17 23:39:16 2013 RescueRecovery: D:\RRbackups\SZ\816B916B3551CB11-818F8F29B139CFE8
Mon Jun 17 23:39:16 2013 RescueRecovery: loadBackups() - will check file m_iLocation=8, szBackups=D:\RRbackups\SZ\816B916B3551CB11-818F8F29B139CFE8\common\backups.dat
Mon Jun 17 23:39:16 2013 RescueRecovery: loadBackups() - deleteRegistryKey SOFTWARE\Lenovo\Rescue and Recovery\Backups\USB, D:\RRbackups\SZ\816B916B3551CB11-818F8F29B139CFE8\common\backups.dat
Mon Jun 17 23:39:16 2013 RescueRecovery: Restore executed: location=8 level=0
Mon Jun 17 23:39:17 2013 RescueRecovery: In GetBackupFolderName, get local UUID!
Mon Jun 17 23:39:17 2013 RescueRecovery: In CreateSpecialBackupFolder, get szBackupFolder is C:\RRbackups\SZ\816B916B3551CB11-818F8F29B139CFE8
Mon Jun 17 23:39:17 2013 RescueRecovery: CreateSpecialBackupFolder: szBackupFolder= C:\RRbackups, szMidiumFolder = C:\RRbackups\SZ
Mon Jun 17 23:39:17 2013 RescueRecovery: Running: icacls "C:\RRbackups" /inheritance:r
Mon Jun 17 23:39:17 2013 RescueRecovery: Running: icacls "C:\RRbackups" /grant:r *S-1-5-18OI)(CI)F /T /C
Mon Jun 17 23:39:17 2013 RescueRecovery: icacls Legacy folder: C:\RRbackups\*
Mon Jun 17 23:39:17 2013 RescueRecovery: icacls Legacy folder: "C:\RRbackups\SZ" /inheritance:d
Mon Jun 17 23:39:17 2013 RescueRecovery: Running: icacls "C:\RRbackups\SZ" /inheritance:d
Mon Jun 17 23:39:17 2013 RescueRecovery: Running: icacls "C:\RRbackups\SZ" /grant:r *S-1-1-0OI)(CI)F /T /C
Mon Jun 17 23:39:17 2013 RescueRecovery: Running: icacls "C:\RRbackups\SZ" /inheritance:d
Mon Jun 17 23:39:17 2013 RescueRecovery: Running: icacls "C:\RRbackups\SZ" /grant:r *S-1-1-0OI)(CI)F /T /C
Mon Jun 17 23:39:17 2013 RescueRecovery: Running: icacls "C:\RRbackups" /remove *S-1-1-0
Mon Jun 17 23:39:17 2013 RescueRecovery: Running: icacls "C:\RRbackups" /remove *S-1-5-32-544

Step by step instructions for recovering your system using ThinkVantage Rescue and Recovery

Official Instructions for using ThinkVantage Rescue and Recovery.
Message Edited by carbon_unit on 11-04-2008 03:24 PM
T60 2623-D7U, 3 GB Ram. Dual boot XP and Linux Mint.
T400 2765-T7U Windows 7
Registered Linux User #160145
FYI: I am not employed by Lenovo

I installed Win 7 Pro 64 on my T400, ran TVSU and installed R&R 4.3. Fortunately, I didn't read those instructions first, or I might not have done it
Have you tried just installing R&R? If it needs anything else, it should ask for it during the install. IIRC, it does require the VCC+ package.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Can not restore factory operating system by Rescue and Recovery lenovo 3000 N200 - please HELP!!!

Hello,
I am in very big problem hope you can help my with it!
i have lenovo 3000 N200 Notebook , my operating system since yesterday i have been formated the partition C after Rescue and Recovery didn't help and install a diffrent OS, i didn't delete the lenovo Partition!!
now i can't access the Rescue and Recovery
my qustion is - can i some how restore the factory OS by Rescue and Recovery??
TNX
Tal,

The only other option, before calling service and ordering recovery disks, is to try the Rescue and Recovery - Recovery repair diskette. And yes, a floppy drive will be required.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Rescue and Recovery AND Create Recover Media crash

Hi,
I need some guidance on my problems with Think Vantage. I am new to this forum and overwhelmed by the volume of information.
My problem. "Rescue and Recovery" AND "Create Recover Media" crash when I attempt to use them.
I have a Lenovo N100 0768A27 running XP. Everything is up-to-date. I have no other problems!
I have downloaded the System Tool Box but that does not want to work either.
I am running R&R version 3.01.1037.00 and I think Client Security 6.1.44.0 but is does not show in my application list only when I logon.
I must confess to turning RR off for a while as I was short of space.
I have tried updating RR to version 4.2 but cannot de-install original version.
I would appreciate some direction on who to step thru this problem and what info to use.
Regards
Garry
Moderator Note: Edited subject to match content.
Solved!
Go to Solution.

hey Thegazzman00,
welcome to the forums and for this, was there any error when it crash or when you were trying to upgrade to version 4.2 ?
If yes, could you provide a screenshot for us ? Many thanks for that.
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Recovering Rescue and Recovery data from a T61p with the GPU failure problem

My t61p has the GPU (1 long 2 short beeps) problem described in another thread. Apart from getting the laptop fixed, which will take several weeks, I have a more pressing problem getting my data back from this laptop.
I have been using Lenovo Rescue and Recovery religiously for the last two years to create monthly incremental backups on a USB drive. While I am trying to get my laptop repaired, I would like to at least recover my files from the backup and start working on a different machine.
I was told by Lenovo support that the only way to get to the data is to connect the drive to another T61p, running the exact same version of Rescue and Recovery I had on my original T61p. For one, I have to idea what version of R&R I had on my laptop. Secondly, I am in no position to get another T61p just to recover the data.
I would have thought that there would be a version of R&R that I could run on any Windows machine, and recover the data, but apparently that's not so.
Does anyone have any suggestions about how I can recover my data?
Thanks.

Hi,
the basic and most importatnt information, in this case is, that RnR can detect/read backups that have been captured using the very same version as you are using right now.
So in case you captured your backup using version xx.xx.xxx1 you cannot restore, or recover your backup using the version xx.xx.xxx2. You need to us the very same version.
As Win7 uses different version of RnR, this is the root cause.
Hope this helps.
Cheers

Rescue and Recovery tool - problem with recovering files stored on USB memory stick

I recently had to use the Lenovo Care Rescue and Recovery tool to restore my 300 N200 to a previously backed up state.
As part of the Rescue and Recovery I selected the option to save user data in My Documents to a USB memory stick before restoring to the backup. This seemed to be successful (tool confirmed that 300MB of files were saved). But when I wanted to restore the files from the USB memory stick back to the laptop none of the folders/files is visible.
I checked the memory status of the USB memory stick and this confirms that 300MB space is taken up - but no files visible!!!
Can anyone help??

ttt

Issues with a T61 harddisk, UNMOUNTABLE_BOOT_VOLUME, cannot also get in the Rescue and Recovery

Dear Lenovo Support Community,
I have a T61 with XP pro on it. This is the history of my harddisk problems with it:
(the harddisk is HDD0 Fujitsu MHW21160BJ G1 and everything in laptop (HW and SW) are same as the factory sold one)
1. Unfortunately I had not made any recovery cd/dvd when the computer was healthy
2. Some time ago, after a crash, and during the chkdsk in the following boot up, harddisk showed 12kb bad sector
3. Due to more crashes and not being able to login once, went to rescue & recovery and only recovered OS to an old and healthy state. Kept my data, lost all the new programs installed but got the OS fine and running. --> I guess the bad thing that may have happened is that recovered OS may have used those bad sectors as well, but this is just a guess.
4. Problems, slow downs, the 12kb bad sector, issues kept coming back every couple or few weeks. Repeated the rescue and recovery OS installations another two times.
5. Few days ago, all was good, but needed to restart, but this time a blue screen came up with UNMOUNTABLE_BOOT_VOLUME. This screen comes up even if I try to go into safe mode, with networking, or even with only DOS prompt.
6. Tried to go to rescue and recovery (version 4), it took a really long time and was telling me that something wrong with the file \minit\setupapi.log and after a long long time that it got in the page for rescue and recovery, it was not doing anything by clicking on any of the buttons.
7. Took the hard out, connected it through an external enclosure to another computer, the main drive could not be read at all, I/O error, not distinguishable.
8. But the SERVICE drive was understood and I could even run chkdsk /F F:\ on it and it repaired the file mentioned above (\minit\setupapi.log).
9. Put the hard back into T61, went to rescue & recovery, this time the error on the file was not showing up, but since the step #8, I have not been able to get pass the initial screen of rescue & recovery. It doesn't go in at all.
10. Found it through Google search, the famous post on this forum about fixing the Master Boot Record. Got the little program, burned on a CD, went through all of its steps, finished as described in the famous thread, but I am not sure if it has been any help to me so far.
11. In few other occasions, connected the hard through the external enclosure to another computer and found online and used programs like Disk Doctors Windows Recovery Data and EASEUS Data Recovery Wizard and was able to just read inside both NTFS main disk and FAT32 service disk (windows can also read the service disk but cannot read the main disk). Using the free version of EASEUS, I could even read and save my personal data since my last backup, so I am good to even format the T61 hard but still I don't want to give up on that.
12. While the lenovo harddisk is in it, in a restart went to BIOS (F1) and ran the harddisk diagnosis, It said: "Pass: Controller Diag, Error code 0000: Read verification failed". And after the "Test complete", it gave a red message in the middle of screen that "<<< An error was found. Call for service >>>"
13. As mentioned in #1, I don't have Lenovo's recovery Windows XP CD(s) for T61, but I have some other windows xp installation CD's, I thought I can put them in CD drive, boot up from CD, and try to recover or repair the windows, It seems that they tell me there is no harddisk in your computer!! When I press "R" to go to recovery console, it tells me: "Setup did not find any hard drives installed in your computer."
My questions for dear members of this forum are:
1. Can I recover my T61 harddisk with the above description? It is being read nicely with the recovery programs, so it should have not been damaged seriously. Please guide me to other things that I can try?
2. I can see and read the Service part of the drive from Windows (no recovery program needed) while connecting the drive through external enclosure to another computer. Can I run a program from the Service part of disk and make those T61 Recovery CD and DVD?
3. If I purchase the Recovery CD(s) from Lenovo, would they be doing any magic or help in my case described above?
4. Can I make recovery CD(s) from another T61 laptop and use them for mine?
Thanks all for reading my long post and helping me. God Bless.
Best Regards,
AL_K

Step One: Install windows
Step Two: run system update
Step Three: Your done (optionally have a beer and relax)
Sorry, step three was a bit of humor I added.
Actually these recovery CDs were produced before the first T61 was made, probably in 2006. The T61 line was replaced in 2008.
You can activate with the code on your COA, I've done it many times, just make sure you do a full (new) installation, not an upgrade, from an oem disc.
If you do end up using the original product recovery disc set, your steps are more like this...
1. Install disc one... wait 30-60mins
2. Install disc two... wait 30-60mins
3. Install disc three... wait 30-60mins
4. Install disc four... wait 30-60mins
5. Install disc five... wait 30-60mins
6. Install disc six... wait 30-60mins
7. Install disc seven... wait 30-60mins
8. Install disc eight... wait 30-60mins
9. download latest service pack for windows and install (over an hour)
10. Install (replace old version) system update and run.
11. go to windows update and update several years worth of patches and hotfixes. (1-4 hours)
12. kick back and have a warm beer and cold pizza, if there is any left after I finished hours ago and celibrated already.
Also, after going through all that, you've not only installed windows, then replaced nearly the entire operating system, but you've also used valuable harddisc space to make several redundant copies of the outdated files, drivers and apps.
Please understand, I'm not saying the recovery discs are a bad design, they work great, and back in 2006-7-8-9 I'd happily go through all that work, but today all the stuff on them is to old so it's futile to go through all that. It would be really nice if Lenovo updated the install discs, and we could download the latest version to use, but they basically just leave them untouched after the model line is released, so nothing on that disc is newer then about 2006.
I'll also add that both George and I have done this well over 100 times each, so we wouldn't be suggesting this if it wasn't the best option, but in the end you'll have a working system no matter which route you take to get there, so the only question to ask yourself is...
Do you like your beer cold and your pizza hot
Good luck, and enjoy your endeavours
ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

Rescue and Recovery Won't Open on My R61i Laptop

Computer: 2008 Lenovo R61i Laptop with Windows XP, SP 3, 2 GB RAM, Intel Duo Core processor, 34 GB free on the hard drive
I had been wondering why my 160 GB hard drive was filling up even though I only have 10 GB of documents, photos, and videos saved, so I downloaded a little program called windirstat, and it told me that 50 GB was being used for RRbackups. Google told me what that is, and I opened it and checked to see how many backups were there (it said 5, counting an initial "basic" backup). I attempted to delete the newest one, but I can't tell if the process finished, and now I can't get Rescue and Recover to even open. I have defragged my hard drive, I have tried it in SAFE MODE, nothing works.
Here are my questions and additional info:
Is the initial "basic" backup where the backup of the Windows XP operating system is located? (I'm guessing that if the answer is "yes," then I don't want to delete that backup.) The size of this backup is 36 GB.
If so, could that backup be moved to an external hard drive and still be usable?
I also have Go Back (keeps a compressed image of my hard drive on the same drive for restoration of files and reverting the hard drive to a previous status). I have used this program for years and would rather use it that Rescue and Recovery for incremental backups because it's automatic and updates more often.
I also now use Carbonite, so I may need to rethink how I should use R & R and GoBack.
I'm thinking that I would like to keep the R&R initial back for Windows files but tell R&R to not to any more backups, then continue to use GoBack and Carbonite.
The primary problem at the moment is that R&R won't open at all, so I can't delete any backups and I can't tell it to stop trying to do incremental backups. HELP!
Thanks in advance,
Jim King

Hi,
can you please describe, how did you tried to delete the RnR backup? Using GUI, or manually in the RRbackups?
NOTE: The files stored in the RRbackup are encrypted and each file has also a metadata file, that conatins the informations on the purpose of that one file and some other usefull informations for RnR so that the restore can work.
Here are the answers on your questions:
1) If I understand it correctly, then the answer is YES. In case you have placed all the RnR backups localy, then the basic/initial backup and also the other incremental backups are stored exactly in the RRbackups folder.
2) YES, you can move it, BUT not manually. You need to use the RnR GUI to copy/move the backup on a network drive, or USB HDD. You can read more about this option in the Manual for RnR (sorry I don't want to describe it in here, as this is a bit longer description). So please review following guide:
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkvantage_en/rnr43dg.pdf
Page 61 describes this process using the rrcmd.exe utility.
3) I think, this is just a note
4) same here
5) In this case, it's of course possible to keeep just the original/inicial backup. In case you don't want to do any other backups, then you just make sure, that you dissable the scheduler of RnR and don't do any other backups.
6) For this situation, the crucial point is, what did you deleted in the RRbackups. However, the first point, that I would do is to reinstall, or repair RnR. NOTE: Please use the same package, or the package, that is stored on your system. From Add/REmove programs.
Please let me know, if you have any add questions to this situation.
Cheers

Rescue and Recovery 4.0 on t43: can't access rescued files in Windows

Strange issue. My hard drive had a serious problem and I had to replace it. Before I did, I ran a rescue files operation, which apparently completed successfully. The problem is, my Documents and Settings folder does not appear in Windows or in DOS. If I run rescue and recovery from the USB recovery media, I can see the folders and all the files in Documents and Settings, and even open some of them using the internal browser. But when I start windows and open the hard drive, all of the other files (Windows, Program files etc) and folders are there, but Documents and Settings is not visible. Ditto for browsing using the command prompt. Really strange. As of now, I cannot recover my documents to my new hard drive. What should I do?

I had this same problem with my rescued Music folder in Vista SP1. Just figured it out!
Go into "Folder Options" in the Control Panel in XP or Vista (should be the same. Use Classic View) and uncheck "Hide Protected Operating System Files". This shows System files and folders.
Head to wherever you rescued those elusive files to.
Since I rescued the Music folder to my USB external drive, the folder F:/Users/Music so on and so forth, is now visible. The simplest way to get these files onto your desktop, Documents, etc (since you can't make them not hidden), is to simply copy the entire folder.
I suggest heading back to Folder Options and checking "Hide Protected Operating System Files" again. Don't want to accidentally delete something you don't want to!
Problem solved! I hope this helps! I just finished copying the files as i wrote this, and can confirm it works for me. Let me know how it goes for you!
Ryan
update: You will need to keep the "Hide Protected Operating System Files" unchecked until you have finished working with the files. To change the files/folders to "not hidden" check out this post: http://www.winvistaclub.com/forum/windows-vista-tips-tutorials/20554-create-super-hidden-system-fold...
You can only go one file/folder at a time. But for ALL 3,000+ music files in F:\Users\Ryan\Music\iTunes.... I only had to unhide Users, Ryan, and Music so it wasn't so bad.
Message Edited by manunited518 on 12-24-2008 09:22 PM

Rescue and Recovery Capability to recover other operating systems

Similar Messages

Maybe you are looking for