Rescue and Recovery issue on T430s

Hi everyone,
i have a problem with the recovery of system backup wich was saved on an external hdd,
i got an replacement laptop from lenovo and am now trying to restore the system.
i have missplaced the boot dvd and created a new one but when i boot from that one R&R can not fimd the backup on my usb drive.
when i try to boot from the usb drive i get a "ntldr missing" error.
has anyone had a similar issue? i am running out od ideas.
thanks in advance.
dean

I can't give great detail as to specifics as I have just recently took over this network.  I can add a 4th machine to the list now as of today.  I can restore back to the original backup from when the machine was initially installed and still get this malware.  i'm going to be replacing a machine in the next few days that has no detectable malware or other issues now.  I'm going to restore a backup on it and see what happens.
I guess this will be a pretty good test.  If a restore on this otherwise ok machine comes back clean I know I am crazy.  If it has this malware in it, then I know there is a problem for sure.  I'll post back here witht he results.

Similar Messages

  • Ericsson H5321gw and Rescue and Recovery issues on Win8.1 (64bit), T430s

    When will have Rescue and Recovery® for Win8.1 (64bit) on T430s? the existing version seems only work on Win7,
    and also the official Ericsson H5321gw/C5621gw Mobile Broadband Driver for Windows 8.1 is not working, when will have update?
    Official link
    http://support.lenovo.com/en_US/downloads/detail.p​age?DocID=DS032425
    Pls help!

    Hi Itai,
    Thanks for posting in MSDN forum.
    Please double check If the UAC is off, so Enhanced Protected Mode doesn't do anything.
    See this thread with similar question:
    http://stackoverflow.com/questions/21458588/ie-tabs-are-not-running-in-64-bit-mode-even-after-enabling-enhanced-protected-mo
    Best regards,
    Kevin

  • Rescue and Recovery Issues!

    Hello All,
    I purchased a T60p about a year and a half ago along with the 3yr. extended warranty.  I have been trying to recover a saved backup on my hard disk since I have had some problems with Windows but have run into a serious problem.  I have tried to restore from rescue and recovery but keep getting a password entry dialog box.  I didn't set one up since I've owned the computer and this is confirmed by the dialog box that states for me to set one up and try again.  I even tryed to use the "forgot password" option and it still sends me around in circles for a password entry.  I have contacted customer service several times and got a set of rescue and recovery discs to set it up to factory state but the password thing still comes up on bootup even from the CD.  The last suggestion from customer service was to purchase a SATA drive-to-USB cable to back up the data to another computer.  But other than seeing the contents of the drive directories I cannot back it up (probably a protected partition).  I am at a loss here and was wondering if anyone could help.
    The files on this hard drive are vital for me to recover as they contain lots of personal pictures of family (some now gone), CAD work, as well as other irreplaceable info.
    Can anyone suggest a course of action?  Is there a service that can retrieve the data?  I have no problem reloading the applications I just need the data files.
    Couple of questions:
    Why can't I reinstall Windows from the discs sent to me from Lenovo (only the R&R disc is bootable)?
    Can I reinstall Windows on the drive without loosing the data on the R & R partition?
    Please Help!
    Nemo
    Message Edited by Nemo on 09-04-2008 05:07 PM
    Lenovo Type 8743-CTO Built in 2007 w/ 3 yr. Extended Warranty

    Hi Nemo,
    My questions may be totally irrelevant, but I'm going to ask them anyway. Just in case.
    Some versions of R&R, when launched, would ask if you want to set a password or protect the backups with your windows password. As you don't mention having tried your windows log-in password, if you have / had one, have you tried using it or, if set up, the default admin account password?
    Also what about the good old enter key i.e. no password, or trying "admin"?
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Rescue and recovery issue

    Within past 24 hours, several complaints about previously stable t60's running Win XP Pro--On startup, hibernation icon is lit and rescue and recovery box displays with only a Yes and No box, no title bar-  (Click YES and a restore commences).  Conflict with a new Win patch or known issue?  Are we unique?

    I can't give great detail as to specifics as I have just recently took over this network.  I can add a 4th machine to the list now as of today.  I can restore back to the original backup from when the machine was initially installed and still get this malware.  i'm going to be replacing a machine in the next few days that has no detectable malware or other issues now.  I'm going to restore a backup on it and see what happens.
    I guess this will be a pretty good test.  If a restore on this otherwise ok machine comes back clean I know I am crazy.  If it has this malware in it, then I know there is a problem for sure.  I'll post back here witht he results.

  • Issues with a T61 harddisk, UNMOUNTABLE_BOOT_VOLUME, cannot also get in the Rescue and Recovery

    Dear Lenovo Support Community,
    I have a T61 with XP pro on it. This is the history of my harddisk problems with it:
    (the harddisk is HDD0 Fujitsu MHW21160BJ G1 and everything in laptop (HW and SW) are same as the factory sold one)
    1. Unfortunately I had not made any recovery cd/dvd when the computer was healthy
    2. Some time ago, after a crash, and during the chkdsk in the following boot up, harddisk showed 12kb bad sector
    3. Due to more crashes and not being able to login once, went to rescue & recovery and only recovered OS to an old and healthy state. Kept my data, lost all the new programs installed but got the OS fine and running. --> I guess the bad thing that may have happened is that recovered OS may have used those bad sectors as well, but this is just a guess.
    4. Problems, slow downs, the 12kb bad sector, issues kept coming back every couple or few weeks. Repeated the rescue and recovery OS installations another two times.
    5. Few days ago, all was good, but needed to restart, but this time a blue screen came up with UNMOUNTABLE_BOOT_VOLUME. This screen comes up even if I try to go into safe mode, with networking, or even with only DOS prompt.
    6. Tried to go to rescue and recovery (version 4), it took a really long time and was telling me that something wrong with the file \minit\setupapi.log and after a long long time that it got in the page for rescue and recovery, it was not doing anything by clicking on any of the buttons.
    7. Took the hard out, connected it through an external enclosure to another computer, the main drive could not be read at all, I/O error, not distinguishable.
    8. But the SERVICE drive was understood and I could even run chkdsk /F F:\ on it and it repaired the file mentioned above (\minit\setupapi.log).
    9. Put the hard back into T61, went to rescue & recovery, this time the error on the file was not showing up, but since the step #8, I have not been able to get pass the initial screen of rescue & recovery. It doesn't go in at all.
    10. Found it through Google search, the famous post on this forum about fixing the Master Boot Record. Got the little program, burned on a CD, went through all of its steps, finished as described in the famous thread, but I am not sure if it has been any help to me so far.
    11. In few other occasions, connected the hard through the external enclosure to another computer and found online and used programs like Disk Doctors Windows Recovery Data and EASEUS Data Recovery Wizard and was able to just read inside both NTFS main disk and FAT32 service disk (windows can also read the service disk but cannot read the main disk). Using the free version of EASEUS, I could even read and save my personal data since my last backup, so I am good to even format the T61 hard but still I don't want to give up on that.
    12. While the lenovo harddisk is in it, in a restart went to BIOS (F1) and ran the harddisk diagnosis, It said: "Pass: Controller Diag, Error code 0000: Read verification failed". And after the "Test complete", it gave a red message in the middle of screen that "<<< An error was found. Call for service >>>"
    13. As mentioned in #1, I don't have Lenovo's recovery Windows XP CD(s) for T61, but I have some other windows xp installation CD's, I thought I can put them in CD drive, boot up from CD, and try to recover or repair the windows, It seems that they tell me there is no harddisk in your computer!! When I press "R" to go to recovery console, it tells me: "Setup did not find any hard drives installed in your computer."
    My questions for dear members of this forum are:
    1. Can I recover my T61 harddisk with the above description? It is being read nicely with the recovery programs, so it should have not been damaged seriously. Please guide me to other things that I can try?
    2. I can see and read the Service part of the drive from Windows (no recovery program needed) while connecting the drive through external enclosure to another computer. Can I run a program from the Service part of disk and make those T61 Recovery CD and DVD?
    3. If I purchase the Recovery CD(s) from Lenovo, would they be doing any magic or help in my case described above?
    4. Can I make recovery CD(s) from another T61 laptop and use them for mine?
    Thanks all for reading my long post and helping me. God Bless.
    Best Regards,
    AL_K

    Step One: Install windows
    Step Two: run system update
    Step Three: Your done (optionally have a beer and relax)
    Sorry, step three was a bit of humor I added.
    Actually these recovery CDs were produced before the first T61 was made, probably in 2006. The T61 line was replaced in 2008.
    You can activate with the code on your COA, I've done it many times, just make sure you do a full (new) installation, not an upgrade, from an oem disc.
    If you do end up using the original product recovery disc set, your steps are more like this...
    1. Install disc one...   wait 30-60mins
    2. Install disc two...   wait 30-60mins
    3. Install disc three...  wait 30-60mins
    4. Install disc four...   wait 30-60mins
    5. Install disc five...  wait 30-60mins
    6. Install disc six...   wait 30-60mins
    7. Install disc seven...   wait 30-60mins
    8. Install disc eight...  wait 30-60mins
    9. download latest service pack for windows and install (over an hour)
    10. Install (replace old version)  system update and run.
    11. go to windows update and update several years worth of patches and hotfixes. (1-4 hours)
    12. kick back and have a warm beer and cold pizza, if there is any left after I finished hours ago and celibrated already.
    Also, after going through all that, you've not only installed windows, then replaced nearly the entire operating system, but you've also used valuable harddisc space to make several redundant copies of the outdated files, drivers and apps. 
    Please understand, I'm not saying the recovery discs are a bad design, they work great, and back in 2006-7-8-9 I'd happily go through all that work, but today all the stuff on them is to old so it's futile to go through all that. It would be really nice if Lenovo updated the install discs, and we could download the latest version to use, but they basically just leave them untouched after the model line is released, so nothing on that disc is newer then about 2006.
    I'll also add that both George and I have done this well over 100 times each, so we wouldn't be suggesting this if it wasn't the best option, but in the end you'll have a working system no matter which route you take to get there, so the only question to ask yourself is...
    Do you like your beer cold and your pizza hot  
    Good luck, and enjoy your endeavours
    ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

  • Installing Rescue and recovery 4.5 on my t430s

    Hello, there,
    my t430s has win7-32bit installed. 
    Now I'd like to make my own recovery DVD, I downloaded the rescue & recovery 4.5 and tried to install it on my laptop, while error occured during the installation process, it prompts me to check in the installation fold if the right tvt file is there. 
    I tried both english/german version but in vain. the same error happend each time.
    Under the extraction folder, I found the following files:
    Z936ZAB1025GR00.tvt, rnr_grlic, tvtrnr, tvtrnr_1025, Z936ZAB1025US00.tvt.
    looks ok but I don't know why it's not working.
    btw, the bios was just updated.
    Anyone could help me out?
    Thanks in advance.
    bests,
    jeff

    Hi Bob,
    which version of client security do you have?
    From Lenovo site: "Rescue and Recovery 4.1 is only compatible with Client Security Solution 8.0 or later."
    or
    have you tried uninstalling 4.0 and then 4.1 new?
    Regards
    Andy
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Power on and hard disk password issue with rescue and recovery ?

    I have set a power on and hard disk password to prevent any unauthorized user to boot the computer and thats works fine but the problem is that it can be bypassed very easily by pressing the THINKVANTAGE blue button and going through the initial screen of the rescovery process.
    When you reach the main screen of the recovery process just press on "restart system" and on the next boot up you won't be asked for a password and it will boot into Windows. Is there any way to prevent a user to initiate a rescue and recovery to bypass the password or even better a patch that will trigger the password screen as soon as the blue THINKVANTAGE button is pressed ?

    I just recently discovered this problem as well.
    I'm hoping someone can help us with this.

  • X220 factory restore issue with Rescue and Recovery

    I have X220 which I enjoyed very much for the last one year. Warranty is just expired and unfortunately the system starts act crazy. I decided to reformat and go back to factory setting stage by using Rescue and Recovery. I could get to the Full Restore and could click full factory restore. The system ask me to restart but instead reformat the HD, the previous OS kicks in and reboot as previous setting. Please help!!!

    Are you sure Q: partition is absolutely empty? Normally .WIM files on partition Q: are stored in hidden directory FactoryRecovery.
    Check out Lenovo Factory Recovery Discs within Control Panel for creating factory image media.
    x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
    x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
    Do it well, worse becomes itself
    Русскоязычное Сообщество   English Community   Deutsche Community   Comunidad en Español

  • Rescue and recovery files prompt issues

    Hi all, I want to ask if there is a method to config rescue and recovery so it will automatically skip/retry files when it ran into trouble backing up?
    At the moment R & R prompt me every time it tries to backup a file and failed. It gives me option to skip or retry backing up, that is fine with me other than the fact that I run my backup mostly at night expecting to have it done when I wake up so I can take my laptop to work. Now most of the times I have to cancel it when I woke up (because it is still at 2% or something) and I just do not have time to sit and go through all the prompts it has.
    I have search the forum and there was a similar post last year when someone suggest to keep all those files in exclude list. This might work given time but it will takes me hours to sit through all the prompts and copy all the files names manually before I can try this solution. I wonder if there is a configuration file somewhere where I can instruct R & R to automatically skip/retry in this situation?
    Thanks!

    The school probably loaded a custom opertaing system image which most likely does not include the restore partition.
    You will need to find a set of recovery discs if you want a factory image. Alternatively, You can load plain windows if you find an OEM install cd and use the product key number on the COA sticker located on the bottom of your Thinkpad. The drivers download from here.
    T60 2623-D7U, 3 GB Ram. Dual boot XP and Linux Mint.
    T400 2765-T7U Windows 7
    Registered Linux User #160145
    FYI: I am not employed by Lenovo

  • Deleting Rescue and Recovery backups

    I using WinXP+SP3 and Rescue and Recovery 4.  I launch Rescue and Recovery via Start-Programs-ThinkVantage-Rescue and Recovery.  In the Window that opens I click 'Change schedule, name a backup, delete backups'. Another Windown opens and I can see my backups listed at the bottom of this Window.   When I select a backup to delete,  a small Window opens that asks if I'm sure I want to delete the backup.  I say 'yes'.  Another Windown opens that says 'Please wait while the backups are deleted'.
    My issue is Rescue and Recovery seems to hang and never finishes the  backup deletion.  I see the access light on my external drive blink at first so Rescue and Recovery seems to be doing something at first but the 'Please wait while the backups are deleted' never closes.  I let the delete run all night and when I got up, the Window was still there.  I tried to delete another backup and got the same result.
    What is causing the problem?  I can see the contents of my external drive in Windows Explorer so I know my PC can access it.

    rmbowma, welcome to the forum,
    delete the last backup on it's own first, you should then be able to delete other backups.
    Please remember that they are incremental backups, you can't delete for instance backups 2-5 leaving 1 & 6 as 6 is dependent on 2-5.
    Hope this helps
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Help with Lenovo Rescue and Recovery 4.31

    Hello,
    I work for a company that uses Ghost images for deploying laptops. We have recently decided to try the Lenovo Rescue and Recovery software built in with the new T520s when doing our local backup before sending the laptop out to the user.
    What we decided to try is building the base image, creating the backup locally on the computer using R&R, dumping the image to our server using Ghost and then imaging other laptops with that image.
    Our reasoning for creating the local backup first, is that time is not that big of an issue when creating the initial image, and neither is imaging other laptops because we create spares that we have built and ready to go out. What we would then do is apply any updates since the laptop was imaged, and have R&R create an incremental backup again, which would only take a few minutes and the laptop would be ready to ship.
    Upon using this method, we have found that you cannot view the original first backup created in R&R on a laptop that it was not created with. The backup content is there, as the drive space is used and booting into a DOS prompt and browsing the C:\RRbackups\SZ\<UID>\ folder shows the data.
    What I'm looking to know is how the R&R software generates that UID, and if anything can be done to allow the other laptops to recognize, whether it's rename the folder with a UID that the new laptop is going to use, or if it's something within the software files that's changable. Or even the registry.
    Any ideas or suggestions would be great.
    Thanks!

    kylejg, welcome to the forum,
    R&R is a little system specific. How many systems are you expecting to deploy using the method you describe?
    It might be worth taking a look at the "Big Brother" of R&R namely Image Ultra Builder as it should be able to, with ease, realise exactly that which you are aiming for.
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Thinkvantage Rescue and Recovery - old backups still showing in R&R

    When I initially set up my network and installed Rescue and Recovery, I created a network share that I did my backup to.  I reconfigured my network and deleted the network share (and the subsequent backup data) outside of Rescue and Recovery and did not delete the backups from within Rescue and Recovery.   Now, my problem is that R&R still thinks that those backups are supposed to exist and when I do a Delete Backups, they show in the list, but I cannot delete them.  If this were the only issue (showing in the list) I would just write it off as an annoyance.  The issue I have is without that network share defined and active, when you start R&R it appears to hang for several minutes and does not appear to be starting - after a few minutes, it pops up a window asking to define the network path.
    Before I try uninstalling and re-installing (which I think I have done at least once), is there a way to clean up R&R and what it thinks about this network share and the subsequent backups?

    Please take a look at this thread. I'm not 100% sure it's exactly what you're looking for, but may point you at the right place to look.
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • How to restore backed up files after I used Rescue and Recovery

    Hi there lenovo community,
    so I'm struggling to find a solution on how to open these files right here:
    Link to image
    First of all, the program I used to back up my hard drive was the Rescue and Recovery that my lenovo desktop came with. I used an external hard drive (WD My Passport, specifically) to back up my old hard drive. The problem that I'm facing right now is how I can open these files, they seem to be not working with any of the option programs the "open with" thingy offers me. If anyone knows  an easy solution for this please please respond to me immediately.. I would really really appreciate it.  I have important documents there.  
    Thanks,
    Enrico
    Moderator note: large image(s) converted to link(s):  About Posting Pictures In The Forums

    Hello CP101, It seems this file extention is a priority file format.
    Here  is a link that has some information on how to resolve the issue.
    I would suggest reading all the suggestions, as some have different methods for resolving this issue.
    Please click the White Kudos star on the left, to say thanks.
    Please mark Accept As Solution if it solves your problem.

  • Recovering backup data from a previous version of Rescue and Recovery

    Dear All,
    can you please advice how can I restore the system&data (Windows 7)
    I created recovery CDs and did the full backup (USB drive)
    I changed disk (diagnostic reported warnings for the old one)
    I recovered system from CD
    I wanted to recover full backup/image from USB drive, however 
    after reboot R&R 4 starts and error message "... backup taken with previous version..." is displayed.
    I wanted to recover single file (R&R 4.31)  from USB drive, however
    error message "The list box identifierwas not found"  is displayed
    What shall I do? upgrade R&R to 4.51? downgrade R&R to 4 (where are downloads)? something else? what R&R versions exist for W7?
    thanks in advance.

    Thank you for coming back to my issue.
    Creation date of  \RRbackups: Jun 11, 2013 
    USB backup is Win7 backup.
    What shall I look for in  folder\rr.log? I am copying here the last unsuccesful recovery attempt>
    Mon Jun 17 23:38:32 2013 RescueRecovery: In GetBackupFolderName, get local UUID!
    Mon Jun 17 23:38:32 2013 RescueRecovery: loadBackups() - will check file m_iLocation=1, szBackups=C:\RRbackups\SZ\816B916B3551CB11-818F8F2​9B139CFE8\common\backups.dat
    Mon Jun 17 23:38:32 2013 RescueRecovery: loadBackups() - deleteRegistryKey SOFTWARE\Lenovo\Rescue and Recovery\Backups\Local, C:\RRbackups\SZ\816B916B3551CB11-818F8F29B139CFE8\​common\backups.dat
    Mon Jun 17 23:38:32 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Mon Jun 17 23:38:36 2013 RescueRecovery: Running: C:\Program Files (x86)\Lenovo\Rescue and Recovery\rrstrigger.exe -start
    Mon Jun 17 23:38:37 2013 RescueRecovery: Getting GUI mask is 16
    Mon Jun 17 23:38:38 2013 RescueRecovery: Running: C:\Program Files (x86)\Lenovo\Rescue and Recovery\rrstrigger.exe -start
    Mon Jun 17 23:38:39 2013 RescueRecovery: OnInitDialog on Parent Panel and the nCount is 0
    Mon Jun 17 23:38:39 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Mon Jun 17 23:38:39 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Mon Jun 17 23:38:39 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Mon Jun 17 23:38:39 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Mon Jun 17 23:38:39 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Mon Jun 17 23:38:39 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Mon Jun 17 23:38:39 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Mon Jun 17 23:38:39 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Mon Jun 17 23:38:39 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Mon Jun 17 23:38:39 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Mon Jun 17 23:38:39 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Mon Jun 17 23:38:39 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Mon Jun 17 23:38:39 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Mon Jun 17 23:38:39 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Mon Jun 17 23:38:39 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Mon Jun 17 23:38:39 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Mon Jun 17 23:38:39 2013 RescueRecovery: In GetBackupFolderName, get local UUID!
    Mon Jun 17 23:38:39 2013 RescueRecovery: In GetBackupFolderName, get local UUID!
    Mon Jun 17 23:38:39 2013 RescueRecovery: ClientGetSecondDiskInfo nSize=10
    Mon Jun 17 23:38:39 2013 RescueRecovery: ServiceGetSecondDiskInfo nSize=10
    Mon Jun 17 23:38:39 2013 RescueRecovery: ServiceGetSecondDiskInfo can not get RR_REGKEY_BACKUP_SECOND_DRIVE_SER_NUM=BackupSecond​DriveSerNum
    Mon Jun 17 23:38:39 2013 RescueRecovery: Enter FindLocalDrive
    Mon Jun 17 23:38:40 2013 RescueRecovery: winGetDriveData find a (usb)
    Mon Jun 17 23:38:42 2013 RescueRecovery: GetSecondBackupfolder iBackupDrive=-1 via FindSecondDrive
    Mon Jun 17 23:38:44 2013 RescueRecovery: ClientGetSecondDiskInfo nSize=10
    Mon Jun 17 23:38:44 2013 RescueRecovery: ServiceGetSecondDiskInfo nSize=10
    Mon Jun 17 23:38:44 2013 RescueRecovery: ServiceGetSecondDiskInfo can not get RR_REGKEY_BACKUP_SECOND_DRIVE_SER_NUM=BackupSecond​DriveSerNum
    Mon Jun 17 23:38:44 2013 RescueRecovery: Enter FindLocalDrive
    Mon Jun 17 23:38:44 2013 RescueRecovery: winGetDriveData find a (usb)
    Mon Jun 17 23:38:47 2013 RescueRecovery: GetSecondBackupfolder iBackupDrive=-1 via FindSecondDrive
    Mon Jun 17 23:38:48 2013 RescueRecovery: winClientIsUSBDrive begin
    Mon Jun 17 23:38:48 2013 RescueRecovery: winClientIsUSBDrive 1
    Mon Jun 17 23:38:48 2013 RescueRecovery: Get USB Drive message
    Mon Jun 17 23:38:48 2013 RescueRecovery: winClientIsUSBDrive 2
    Mon Jun 17 23:38:48 2013 RescueRecovery: winClientIsUSBDrive begin
    Mon Jun 17 23:38:48 2013 RescueRecovery: winClientIsUSBDrive 1
    Mon Jun 17 23:38:48 2013 RescueRecovery: Get USB Drive message
    Mon Jun 17 23:38:49 2013 RescueRecovery: winGetDriveData find a (usb)
    Mon Jun 17 23:38:49 2013 RescueRecovery: Get USB Drive message(winServiceIsUSBDrive)
    Mon Jun 17 23:38:49 2013 RescueRecovery: winClientIsUSBDrive 2
    Mon Jun 17 23:38:49 2013 RescueRecovery: In GetBackupFolderName, get local UUID!
    Mon Jun 17 23:38:49 2013 RescueRecovery: D:\RRbackups\SZ\816B916B3551CB11-818F8F29B139CFE8
    Mon Jun 17 23:38:49 2013 RescueRecovery: In GetBackupFolderName, get local UUID!
    Mon Jun 17 23:38:49 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Mon Jun 17 23:38:49 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Mon Jun 17 23:38:49 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Mon Jun 17 23:38:49 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Mon Jun 17 23:38:49 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Mon Jun 17 23:38:49 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Mon Jun 17 23:38:53 2013 RescueRecovery: Set LOCAL to UUID and reload backup before delete backup!
    Mon Jun 17 23:38:53 2013 RescueRecovery: In GetBackupFolderName, get local UUID!
    Mon Jun 17 23:38:53 2013 RescueRecovery: loadBackups() - will check file m_iLocation=1, szBackups=C:\RRbackups\SZ\816B916B3551CB11-818F8F2​9B139CFE8\common\backups.dat
    Mon Jun 17 23:38:53 2013 RescueRecovery: loadBackups() - deleteRegistryKey SOFTWARE\Lenovo\Rescue and Recovery\Backups\Local, C:\RRbackups\SZ\816B916B3551CB11-818F8F29B139CFE8\​common\backups.dat
    Mon Jun 17 23:38:53 2013 RescueRecovery: ServiceGetSecondDiskInfo nSize=10
    Mon Jun 17 23:38:53 2013 RescueRecovery: ServiceGetSecondDiskInfo can not get RR_REGKEY_BACKUP_SECOND_DRIVE_SER_NUM=BackupSecond​DriveSerNum
    Mon Jun 17 23:38:53 2013 RescueRecovery: Enter FindLocalDrive
    Mon Jun 17 23:38:53 2013 RescueRecovery: winGetDriveData find a (usb)
    Mon Jun 17 23:38:53 2013 RescueRecovery: GetSecondBackupfolder iBackupDrive=-1 via FindSecondDrive
    Mon Jun 17 23:38:55 2013 RescueRecovery: loadBackups() - will check file m_iLocation=32, szBackups=\common\backups.dat
    Mon Jun 17 23:38:55 2013 RescueRecovery: loadBackups() - can't found file m_iLocation=32, szBackups=\common\backups.dat
    Mon Jun 17 23:38:55 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Mon Jun 17 23:38:55 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Mon Jun 17 23:38:55 2013 RescueRecovery: In GetBackupFolderName, get local UUID!
    Mon Jun 17 23:38:55 2013 RescueRecovery: ClientGetSecondDiskInfo nSize=10
    Mon Jun 17 23:38:55 2013 RescueRecovery: ServiceGetSecondDiskInfo nSize=10
    Mon Jun 17 23:38:55 2013 RescueRecovery: ServiceGetSecondDiskInfo can not get RR_REGKEY_BACKUP_SECOND_DRIVE_SER_NUM=BackupSecond​DriveSerNum
    Mon Jun 17 23:38:55 2013 RescueRecovery: Enter FindLocalDrive
    Mon Jun 17 23:38:56 2013 RescueRecovery: winGetDriveData find a (usb)
    Mon Jun 17 23:38:56 2013 RescueRecovery: winGetDriveData find a (usb)
    Mon Jun 17 23:38:56 2013 RescueRecovery: In GetBackupFolderName, get local UUID!
    Mon Jun 17 23:38:56 2013 RescueRecovery: D:\RRbackups\SZ\816B916B3551CB11-818F8F29B139CFE8
    Mon Jun 17 23:38:56 2013 RescueRecovery: loadBackups() - will check file m_iLocation=8, szBackups=D:\RRbackups\SZ\816B916B3551CB11-818F8F2​9B139CFE8\common\backups.dat
    Mon Jun 17 23:38:56 2013 RescueRecovery: loadBackups() - deleteRegistryKey SOFTWARE\Lenovo\Rescue and Recovery\Backups\USB, D:\RRbackups\SZ\816B916B3551CB11-818F8F29B139CFE8\​common\backups.dat
    Mon Jun 17 23:38:58 2013 RescueRecovery: GetSecondBackupfolder iBackupDrive=-1 via FindSecondDrive
    Mon Jun 17 23:38:59 2013 RescueRecovery: winClientIsUSBDrive begin
    Mon Jun 17 23:38:59 2013 RescueRecovery: winClientIsUSBDrive 1
    Mon Jun 17 23:38:59 2013 RescueRecovery: Get USB Drive message
    Mon Jun 17 23:38:59 2013 RescueRecovery: winClientIsUSBDrive 2
    Mon Jun 17 23:38:59 2013 RescueRecovery: winClientIsUSBDrive begin
    Mon Jun 17 23:38:59 2013 RescueRecovery: winClientIsUSBDrive 1
    Mon Jun 17 23:38:59 2013 RescueRecovery: Get USB Drive message
    Mon Jun 17 23:39:00 2013 RescueRecovery: winGetDriveData find a (usb)
    Mon Jun 17 23:39:00 2013 RescueRecovery: Get USB Drive message(winServiceIsUSBDrive)
    Mon Jun 17 23:39:00 2013 RescueRecovery: winClientIsUSBDrive 2
    Mon Jun 17 23:39:00 2013 RescueRecovery: In GetBackupFolderName, get local UUID!
    Mon Jun 17 23:39:00 2013 RescueRecovery: D:\RRbackups\SZ\816B916B3551CB11-818F8F29B139CFE8
    Mon Jun 17 23:39:00 2013 RescueRecovery: In GetBackupFolderName, get local UUID!
    Mon Jun 17 23:39:00 2013 RescueRecovery: ClientGetSecondDiskInfo nSize=10
    Mon Jun 17 23:39:00 2013 RescueRecovery: ServiceGetSecondDiskInfo nSize=10
    Mon Jun 17 23:39:00 2013 RescueRecovery: ServiceGetSecondDiskInfo can not get RR_REGKEY_BACKUP_SECOND_DRIVE_SER_NUM=BackupSecond​DriveSerNum
    Mon Jun 17 23:39:00 2013 RescueRecovery: Enter FindLocalDrive
    Mon Jun 17 23:39:01 2013 RescueRecovery: winGetDriveData find a (usb)
    Mon Jun 17 23:39:03 2013 RescueRecovery: GetSecondBackupfolder iBackupDrive=-1 via FindSecondDrive
    Mon Jun 17 23:39:04 2013 RescueRecovery: winClientIsUSBDrive begin
    Mon Jun 17 23:39:04 2013 RescueRecovery: winClientIsUSBDrive 1
    Mon Jun 17 23:39:04 2013 RescueRecovery: Get USB Drive message
    Mon Jun 17 23:39:05 2013 RescueRecovery: winClientIsUSBDrive 2
    Mon Jun 17 23:39:05 2013 RescueRecovery: winClientIsUSBDrive begin
    Mon Jun 17 23:39:05 2013 RescueRecovery: winClientIsUSBDrive 1
    Mon Jun 17 23:39:05 2013 RescueRecovery: Get USB Drive message
    Mon Jun 17 23:39:05 2013 RescueRecovery: winGetDriveData find a (usb)
    Mon Jun 17 23:39:05 2013 RescueRecovery: Get USB Drive message(winServiceIsUSBDrive)
    Mon Jun 17 23:39:05 2013 RescueRecovery: winClientIsUSBDrive 2
    Mon Jun 17 23:39:05 2013 RescueRecovery: In GetBackupFolderName, get local UUID!
    Mon Jun 17 23:39:05 2013 RescueRecovery: D:\RRbackups\SZ\816B916B3551CB11-818F8F29B139CFE8
    Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Mon Jun 17 23:39:05 2013 RescueRecovery: OnPaint on Parent Panel and the nCount is 0
    Mon Jun 17 23:39:09 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Mon Jun 17 23:39:09 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Mon Jun 17 23:39:12 2013 RescueRecovery: winClientIsUSBDrive begin
    Mon Jun 17 23:39:12 2013 RescueRecovery: winClientIsUSBDrive 1
    Mon Jun 17 23:39:12 2013 RescueRecovery: Get USB Drive message
    Mon Jun 17 23:39:12 2013 RescueRecovery: winClientIsUSBDrive 2
    Mon Jun 17 23:39:12 2013 RescueRecovery: winClientIsUSBDrive begin
    Mon Jun 17 23:39:12 2013 RescueRecovery: winClientIsUSBDrive 1
    Mon Jun 17 23:39:12 2013 RescueRecovery: Get USB Drive message
    Mon Jun 17 23:39:13 2013 RescueRecovery: winGetDriveData find a (usb)
    Mon Jun 17 23:39:13 2013 RescueRecovery: Get USB Drive message(winServiceIsUSBDrive)
    Mon Jun 17 23:39:13 2013 RescueRecovery: winClientIsUSBDrive 2
    Mon Jun 17 23:39:13 2013 RescueRecovery: In GetBackupFolderName, get local UUID!
    Mon Jun 17 23:39:13 2013 RescueRecovery: D:\RRbackups\SZ\816B916B3551CB11-818F8F29B139CFE8
    Mon Jun 17 23:39:13 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Mon Jun 17 23:39:13 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Mon Jun 17 23:39:15 2013 RescueRecovery: In GetBackupFolderName, get local UUID!
    Mon Jun 17 23:39:16 2013 RescueRecovery: winGetDriveData find a (usb)
    Mon Jun 17 23:39:16 2013 RescueRecovery: In GetBackupFolderName, get local UUID!
    Mon Jun 17 23:39:16 2013 RescueRecovery: D:\RRbackups\SZ\816B916B3551CB11-818F8F29B139CFE8
    Mon Jun 17 23:39:16 2013 RescueRecovery: loadBackups() - will check file m_iLocation=8, szBackups=D:\RRbackups\SZ\816B916B3551CB11-818F8F2​9B139CFE8\common\backups.dat
    Mon Jun 17 23:39:16 2013 RescueRecovery: loadBackups() - deleteRegistryKey SOFTWARE\Lenovo\Rescue and Recovery\Backups\USB, D:\RRbackups\SZ\816B916B3551CB11-818F8F29B139CFE8\​common\backups.dat
    Mon Jun 17 23:39:16 2013 RescueRecovery: Restore executed: location=8 level=0
    Mon Jun 17 23:39:17 2013 RescueRecovery: In GetBackupFolderName, get local UUID!
    Mon Jun 17 23:39:17 2013 RescueRecovery: In CreateSpecialBackupFolder, get szBackupFolder is C:\RRbackups\SZ\816B916B3551CB11-818F8F29B139CFE8
    Mon Jun 17 23:39:17 2013 RescueRecovery: CreateSpecialBackupFolder: szBackupFolder= C:\RRbackups, szMidiumFolder = C:\RRbackups\SZ
    Mon Jun 17 23:39:17 2013 RescueRecovery: Running: icacls "C:\RRbackups" /inheritance:r
    Mon Jun 17 23:39:17 2013 RescueRecovery: Running: icacls "C:\RRbackups" /grant:r *S-1-5-18OI)(CI)F /T /C
    Mon Jun 17 23:39:17 2013 RescueRecovery: icacls Legacy folder: C:\RRbackups\*
    Mon Jun 17 23:39:17 2013 RescueRecovery: icacls Legacy folder: "C:\RRbackups\SZ" /inheritance:d
    Mon Jun 17 23:39:17 2013 RescueRecovery: Running: icacls "C:\RRbackups\SZ" /inheritance:d
    Mon Jun 17 23:39:17 2013 RescueRecovery: Running: icacls "C:\RRbackups\SZ" /grant:r *S-1-1-0OI)(CI)F /T /C
    Mon Jun 17 23:39:17 2013 RescueRecovery: Running: icacls "C:\RRbackups\SZ" /inheritance:d
    Mon Jun 17 23:39:17 2013 RescueRecovery: Running: icacls "C:\RRbackups\SZ" /grant:r *S-1-1-0OI)(CI)F /T /C
    Mon Jun 17 23:39:17 2013 RescueRecovery: Running: icacls "C:\RRbackups" /remove *S-1-1-0
    Mon Jun 17 23:39:17 2013 RescueRecovery: Running: icacls "C:\RRbackups" /remove *S-1-5-32-544

  • Rescue and Recovery 4.5. Rescue media can't boot from FAT32 64GB flash drive.

    T530 Windows 7. I did a full (base) backup to a 64GB USB flash drive formatted FAT32. R&R started by indicating “Rescue and Recovery Medium being created” and after a few hours finished the backup. When I click on ‘View all backups’ I can see the backup created. I then tested the flash drive to see if it’s bootable but the screen only shows rapidly moving white font gibberish over black background. I did the same as a test on a 8GB USB flash drive formatted NTFS (I had to stop the backup since 8GB was not enough space) but had no trouble booting from it. Both flash drives have the folders: boot, efi, Preboot, RRbackups, tvtos and files: bootmgr, bootmgr.efi, fcopy.ini. In other words, the only difference seems to be that it works with 8GB NTFS but not with 64GB FAT32. Is that the issue or just coincidence?
    Solved!
    Go to Solution.

    The readme file for RNR 4.5.1 states:
    Consideration 7
    Unable to boot from a 64 GB USB memory key
    When you create rescue media on a 64 GB USB memory key and then boot your computer from the memory
    key, an error message is displayed, saying, ?¡ãError loading Operating System.?¡À
    To solve the problem, change the 64 GB USB memory key to one with less storage capacity.
    ===
    The question is.. is your Flash USB a memory key?
    I would reformat  the 64GB to NTFS, then run the Create Rescue Media option onto it.  Then try to boot the USB.
    There is another post out here stating on certain USB sticks, you have to PREFORMAT it,  using diskpart command, before using the Create Rescue Media option..
    This link might help:
    http://support.lenovo.com/en_US/detail.page?Legacy​DocID=MIGR-74246

Maybe you are looking for