Rescue and Recovery to USB

Hi, in preparation for my new machine, got a quick question.
I though i read somewhere that you could make the rescue and recovery onto usb stick?
Anyone with experience with this, either doing it or if it can be done.
Lenovo x120e E-350, XT Momentus Hybrid 500gb , 4gb Ram, 1x1 WiFi, Win7 64 Home Premium SP1

if you don't want to do all that above just formate to NTFS file system then when you start the backup you will be prompted to create rescue media select yes this will allow the USB to boot to predesktop recovery environment
Thinkpad R61 7733-1GU
Thinkpad X61T 7762-54U
Thinkpad X60T 6363-4GU
Did a member help you today? Thank them with a Kudo!
If a post answers your question, please mark it as an "Accepted Solution"!
Regards,
GMAC

Similar Messages

Recovering backup data from a previous version of Rescue and Recovery

Dear All,
can you please advice how can I restore the system&data (Windows 7)
I created recovery CDs and did the full backup (USB drive)
I changed disk (diagnostic reported warnings for the old one)
I recovered system from CD
I wanted to recover full backup/image from USB drive, however
after reboot R&R 4 starts and error message "... backup taken with previous version..." is displayed.
I wanted to recover single file (R&R 4.31) from USB drive, however
error message "The list box identifierwas not found" is displayed
What shall I do? upgrade R&R to 4.51? downgrade R&R to 4 (where are downloads)? something else? what R&R versions exist for W7?
thanks in advance.

Thank you for coming back to my issue.
Creation date of \RRbackups: Jun 11, 2013
USB backup is Win7 backup.
What shall I look for in folder\rr.log? I am copying here the last unsuccesful recovery attempt>
Mon Jun 17 23:38:32 2013 RescueRecovery: In GetBackupFolderName, get local UUID!
Mon Jun 17 23:38:32 2013 RescueRecovery: loadBackups() - will check file m_iLocation=1, szBackups=C:\RRbackups\SZ\816B916B3551CB11-818F8F29B139CFE8\common\backups.dat
Mon Jun 17 23:38:32 2013 RescueRecovery: loadBackups() - deleteRegistryKey SOFTWARE\Lenovo\Rescue and Recovery\Backups\Local, C:\RRbackups\SZ\816B916B3551CB11-818F8F29B139CFE8\common\backups.dat
Mon Jun 17 23:38:32 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:36 2013 RescueRecovery: Running: C:\Program Files (x86)\Lenovo\Rescue and Recovery\rrstrigger.exe -start
Mon Jun 17 23:38:37 2013 RescueRecovery: Getting GUI mask is 16
Mon Jun 17 23:38:38 2013 RescueRecovery: Running: C:\Program Files (x86)\Lenovo\Rescue and Recovery\rrstrigger.exe -start
Mon Jun 17 23:38:39 2013 RescueRecovery: OnInitDialog on Parent Panel and the nCount is 0
Mon Jun 17 23:38:39 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:39 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:39 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:39 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:39 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:39 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:39 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:39 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:39 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:39 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:39 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:39 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:39 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:39 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:39 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:39 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:39 2013 RescueRecovery: In GetBackupFolderName, get local UUID!
Mon Jun 17 23:38:39 2013 RescueRecovery: In GetBackupFolderName, get local UUID!
Mon Jun 17 23:38:39 2013 RescueRecovery: ClientGetSecondDiskInfo nSize=10
Mon Jun 17 23:38:39 2013 RescueRecovery: ServiceGetSecondDiskInfo nSize=10
Mon Jun 17 23:38:39 2013 RescueRecovery: ServiceGetSecondDiskInfo can not get RR_REGKEY_BACKUP_SECOND_DRIVE_SER_NUM=BackupSecondDriveSerNum
Mon Jun 17 23:38:39 2013 RescueRecovery: Enter FindLocalDrive
Mon Jun 17 23:38:40 2013 RescueRecovery: winGetDriveData find a (usb)
Mon Jun 17 23:38:42 2013 RescueRecovery: GetSecondBackupfolder iBackupDrive=-1 via FindSecondDrive
Mon Jun 17 23:38:44 2013 RescueRecovery: ClientGetSecondDiskInfo nSize=10
Mon Jun 17 23:38:44 2013 RescueRecovery: ServiceGetSecondDiskInfo nSize=10
Mon Jun 17 23:38:44 2013 RescueRecovery: ServiceGetSecondDiskInfo can not get RR_REGKEY_BACKUP_SECOND_DRIVE_SER_NUM=BackupSecondDriveSerNum
Mon Jun 17 23:38:44 2013 RescueRecovery: Enter FindLocalDrive
Mon Jun 17 23:38:44 2013 RescueRecovery: winGetDriveData find a (usb)
Mon Jun 17 23:38:47 2013 RescueRecovery: GetSecondBackupfolder iBackupDrive=-1 via FindSecondDrive
Mon Jun 17 23:38:48 2013 RescueRecovery: winClientIsUSBDrive begin
Mon Jun 17 23:38:48 2013 RescueRecovery: winClientIsUSBDrive 1
Mon Jun 17 23:38:48 2013 RescueRecovery: Get USB Drive message
Mon Jun 17 23:38:48 2013 RescueRecovery: winClientIsUSBDrive 2
Mon Jun 17 23:38:48 2013 RescueRecovery: winClientIsUSBDrive begin
Mon Jun 17 23:38:48 2013 RescueRecovery: winClientIsUSBDrive 1
Mon Jun 17 23:38:48 2013 RescueRecovery: Get USB Drive message
Mon Jun 17 23:38:49 2013 RescueRecovery: winGetDriveData find a (usb)
Mon Jun 17 23:38:49 2013 RescueRecovery: Get USB Drive message(winServiceIsUSBDrive)
Mon Jun 17 23:38:49 2013 RescueRecovery: winClientIsUSBDrive 2
Mon Jun 17 23:38:49 2013 RescueRecovery: In GetBackupFolderName, get local UUID!
Mon Jun 17 23:38:49 2013 RescueRecovery: D:\RRbackups\SZ\816B916B3551CB11-818F8F29B139CFE8
Mon Jun 17 23:38:49 2013 RescueRecovery: In GetBackupFolderName, get local UUID!
Mon Jun 17 23:38:49 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:49 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:49 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:49 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:49 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:49 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:53 2013 RescueRecovery: Set LOCAL to UUID and reload backup before delete backup!
Mon Jun 17 23:38:53 2013 RescueRecovery: In GetBackupFolderName, get local UUID!
Mon Jun 17 23:38:53 2013 RescueRecovery: loadBackups() - will check file m_iLocation=1, szBackups=C:\RRbackups\SZ\816B916B3551CB11-818F8F29B139CFE8\common\backups.dat
Mon Jun 17 23:38:53 2013 RescueRecovery: loadBackups() - deleteRegistryKey SOFTWARE\Lenovo\Rescue and Recovery\Backups\Local, C:\RRbackups\SZ\816B916B3551CB11-818F8F29B139CFE8\common\backups.dat
Mon Jun 17 23:38:53 2013 RescueRecovery: ServiceGetSecondDiskInfo nSize=10
Mon Jun 17 23:38:53 2013 RescueRecovery: ServiceGetSecondDiskInfo can not get RR_REGKEY_BACKUP_SECOND_DRIVE_SER_NUM=BackupSecondDriveSerNum
Mon Jun 17 23:38:53 2013 RescueRecovery: Enter FindLocalDrive
Mon Jun 17 23:38:53 2013 RescueRecovery: winGetDriveData find a (usb)
Mon Jun 17 23:38:53 2013 RescueRecovery: GetSecondBackupfolder iBackupDrive=-1 via FindSecondDrive
Mon Jun 17 23:38:55 2013 RescueRecovery: loadBackups() - will check file m_iLocation=32, szBackups=\common\backups.dat
Mon Jun 17 23:38:55 2013 RescueRecovery: loadBackups() - can't found file m_iLocation=32, szBackups=\common\backups.dat
Mon Jun 17 23:38:55 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:55 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:38:55 2013 RescueRecovery: In GetBackupFolderName, get local UUID!
Mon Jun 17 23:38:55 2013 RescueRecovery: ClientGetSecondDiskInfo nSize=10
Mon Jun 17 23:38:55 2013 RescueRecovery: ServiceGetSecondDiskInfo nSize=10
Mon Jun 17 23:38:55 2013 RescueRecovery: ServiceGetSecondDiskInfo can not get RR_REGKEY_BACKUP_SECOND_DRIVE_SER_NUM=BackupSecondDriveSerNum
Mon Jun 17 23:38:55 2013 RescueRecovery: Enter FindLocalDrive
Mon Jun 17 23:38:56 2013 RescueRecovery: winGetDriveData find a (usb)
Mon Jun 17 23:38:56 2013 RescueRecovery: winGetDriveData find a (usb)
Mon Jun 17 23:38:56 2013 RescueRecovery: In GetBackupFolderName, get local UUID!
Mon Jun 17 23:38:56 2013 RescueRecovery: D:\RRbackups\SZ\816B916B3551CB11-818F8F29B139CFE8
Mon Jun 17 23:38:56 2013 RescueRecovery: loadBackups() - will check file m_iLocation=8, szBackups=D:\RRbackups\SZ\816B916B3551CB11-818F8F29B139CFE8\common\backups.dat
Mon Jun 17 23:38:56 2013 RescueRecovery: loadBackups() - deleteRegistryKey SOFTWARE\Lenovo\Rescue and Recovery\Backups\USB, D:\RRbackups\SZ\816B916B3551CB11-818F8F29B139CFE8\common\backups.dat
Mon Jun 17 23:38:58 2013 RescueRecovery: GetSecondBackupfolder iBackupDrive=-1 via FindSecondDrive
Mon Jun 17 23:38:59 2013 RescueRecovery: winClientIsUSBDrive begin
Mon Jun 17 23:38:59 2013 RescueRecovery: winClientIsUSBDrive 1
Mon Jun 17 23:38:59 2013 RescueRecovery: Get USB Drive message
Mon Jun 17 23:38:59 2013 RescueRecovery: winClientIsUSBDrive 2
Mon Jun 17 23:38:59 2013 RescueRecovery: winClientIsUSBDrive begin
Mon Jun 17 23:38:59 2013 RescueRecovery: winClientIsUSBDrive 1
Mon Jun 17 23:38:59 2013 RescueRecovery: Get USB Drive message
Mon Jun 17 23:39:00 2013 RescueRecovery: winGetDriveData find a (usb)
Mon Jun 17 23:39:00 2013 RescueRecovery: Get USB Drive message(winServiceIsUSBDrive)
Mon Jun 17 23:39:00 2013 RescueRecovery: winClientIsUSBDrive 2
Mon Jun 17 23:39:00 2013 RescueRecovery: In GetBackupFolderName, get local UUID!
Mon Jun 17 23:39:00 2013 RescueRecovery: D:\RRbackups\SZ\816B916B3551CB11-818F8F29B139CFE8
Mon Jun 17 23:39:00 2013 RescueRecovery: In GetBackupFolderName, get local UUID!
Mon Jun 17 23:39:00 2013 RescueRecovery: ClientGetSecondDiskInfo nSize=10
Mon Jun 17 23:39:00 2013 RescueRecovery: ServiceGetSecondDiskInfo nSize=10
Mon Jun 17 23:39:00 2013 RescueRecovery: ServiceGetSecondDiskInfo can not get RR_REGKEY_BACKUP_SECOND_DRIVE_SER_NUM=BackupSecondDriveSerNum
Mon Jun 17 23:39:00 2013 RescueRecovery: Enter FindLocalDrive
Mon Jun 17 23:39:01 2013 RescueRecovery: winGetDriveData find a (usb)
Mon Jun 17 23:39:03 2013 RescueRecovery: GetSecondBackupfolder iBackupDrive=-1 via FindSecondDrive
Mon Jun 17 23:39:04 2013 RescueRecovery: winClientIsUSBDrive begin
Mon Jun 17 23:39:04 2013 RescueRecovery: winClientIsUSBDrive 1
Mon Jun 17 23:39:04 2013 RescueRecovery: Get USB Drive message
Mon Jun 17 23:39:05 2013 RescueRecovery: winClientIsUSBDrive 2
Mon Jun 17 23:39:05 2013 RescueRecovery: winClientIsUSBDrive begin
Mon Jun 17 23:39:05 2013 RescueRecovery: winClientIsUSBDrive 1
Mon Jun 17 23:39:05 2013 RescueRecovery: Get USB Drive message
Mon Jun 17 23:39:05 2013 RescueRecovery: winGetDriveData find a (usb)
Mon Jun 17 23:39:05 2013 RescueRecovery: Get USB Drive message(winServiceIsUSBDrive)
Mon Jun 17 23:39:05 2013 RescueRecovery: winClientIsUSBDrive 2
Mon Jun 17 23:39:05 2013 RescueRecovery: In GetBackupFolderName, get local UUID!
Mon Jun 17 23:39:05 2013 RescueRecovery: D:\RRbackups\SZ\816B916B3551CB11-818F8F29B139CFE8
Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:39:05 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:39:05 2013 RescueRecovery: OnPaint on Parent Panel and the nCount is 0
Mon Jun 17 23:39:09 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:39:09 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:39:12 2013 RescueRecovery: winClientIsUSBDrive begin
Mon Jun 17 23:39:12 2013 RescueRecovery: winClientIsUSBDrive 1
Mon Jun 17 23:39:12 2013 RescueRecovery: Get USB Drive message
Mon Jun 17 23:39:12 2013 RescueRecovery: winClientIsUSBDrive 2
Mon Jun 17 23:39:12 2013 RescueRecovery: winClientIsUSBDrive begin
Mon Jun 17 23:39:12 2013 RescueRecovery: winClientIsUSBDrive 1
Mon Jun 17 23:39:12 2013 RescueRecovery: Get USB Drive message
Mon Jun 17 23:39:13 2013 RescueRecovery: winGetDriveData find a (usb)
Mon Jun 17 23:39:13 2013 RescueRecovery: Get USB Drive message(winServiceIsUSBDrive)
Mon Jun 17 23:39:13 2013 RescueRecovery: winClientIsUSBDrive 2
Mon Jun 17 23:39:13 2013 RescueRecovery: In GetBackupFolderName, get local UUID!
Mon Jun 17 23:39:13 2013 RescueRecovery: D:\RRbackups\SZ\816B916B3551CB11-818F8F29B139CFE8
Mon Jun 17 23:39:13 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:39:13 2013 RescueRecovery: LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
Mon Jun 17 23:39:15 2013 RescueRecovery: In GetBackupFolderName, get local UUID!
Mon Jun 17 23:39:16 2013 RescueRecovery: winGetDriveData find a (usb)
Mon Jun 17 23:39:16 2013 RescueRecovery: In GetBackupFolderName, get local UUID!
Mon Jun 17 23:39:16 2013 RescueRecovery: D:\RRbackups\SZ\816B916B3551CB11-818F8F29B139CFE8
Mon Jun 17 23:39:16 2013 RescueRecovery: loadBackups() - will check file m_iLocation=8, szBackups=D:\RRbackups\SZ\816B916B3551CB11-818F8F29B139CFE8\common\backups.dat
Mon Jun 17 23:39:16 2013 RescueRecovery: loadBackups() - deleteRegistryKey SOFTWARE\Lenovo\Rescue and Recovery\Backups\USB, D:\RRbackups\SZ\816B916B3551CB11-818F8F29B139CFE8\common\backups.dat
Mon Jun 17 23:39:16 2013 RescueRecovery: Restore executed: location=8 level=0
Mon Jun 17 23:39:17 2013 RescueRecovery: In GetBackupFolderName, get local UUID!
Mon Jun 17 23:39:17 2013 RescueRecovery: In CreateSpecialBackupFolder, get szBackupFolder is C:\RRbackups\SZ\816B916B3551CB11-818F8F29B139CFE8
Mon Jun 17 23:39:17 2013 RescueRecovery: CreateSpecialBackupFolder: szBackupFolder= C:\RRbackups, szMidiumFolder = C:\RRbackups\SZ
Mon Jun 17 23:39:17 2013 RescueRecovery: Running: icacls "C:\RRbackups" /inheritance:r
Mon Jun 17 23:39:17 2013 RescueRecovery: Running: icacls "C:\RRbackups" /grant:r *S-1-5-18OI)(CI)F /T /C
Mon Jun 17 23:39:17 2013 RescueRecovery: icacls Legacy folder: C:\RRbackups\*
Mon Jun 17 23:39:17 2013 RescueRecovery: icacls Legacy folder: "C:\RRbackups\SZ" /inheritance:d
Mon Jun 17 23:39:17 2013 RescueRecovery: Running: icacls "C:\RRbackups\SZ" /inheritance:d
Mon Jun 17 23:39:17 2013 RescueRecovery: Running: icacls "C:\RRbackups\SZ" /grant:r *S-1-1-0OI)(CI)F /T /C
Mon Jun 17 23:39:17 2013 RescueRecovery: Running: icacls "C:\RRbackups\SZ" /inheritance:d
Mon Jun 17 23:39:17 2013 RescueRecovery: Running: icacls "C:\RRbackups\SZ" /grant:r *S-1-1-0OI)(CI)F /T /C
Mon Jun 17 23:39:17 2013 RescueRecovery: Running: icacls "C:\RRbackups" /remove *S-1-1-0
Mon Jun 17 23:39:17 2013 RescueRecovery: Running: icacls "C:\RRbackups" /remove *S-1-5-32-544

Rescue and Recovery 4.3 on Windows 7 Pro

I've just upgraded my ThinkPad R61 to Win 7 Pro, successfully installed all Win 7 ThinkVantage software and here starts my problem:
When I try to create a backup using RnR 4.3 I get "Gathering system settings and data. Please wait" window, r2r.exe is working for a few minutes and that's it. Nothing more after 11 hours. I thought it may be related to ESET Smart Security, but no.
Part of rr.log:
Wed Nov 04 23:47:02 2009 RescueRecovery: Running: C:\Program Files\Lenovo\Rescue and Recovery\rrstrigger.exe -start
Wed Nov 04 23:47:02 2009 RescueRecovery: Getting GUI mask is 16
Wed Nov 04 23:47:04 2009 RescueRecovery: Running: C:\Program Files\Lenovo\Rescue and Recovery\rrstrigger.exe -start
Wed Nov 04 23:47:04 2009 RescueRecovery: Getting GUI mask is 16
Wed Nov 04 23:47:07 2009 RescueRecovery: Set LOCAL to UUID and reload backup before create backup!
Wed Nov 04 23:47:07 2009 RescueRecovery: In GetBackupFolderName, get local UUID!
Wed Nov 04 23:47:07 2009 RescueRecovery: loadBackups() - deleteRegistryKey SOFTWARE\Lenovo\Rescue and Recovery\Backups\Local, C:\RRbackups\SZ\0000000000000000-0000000000000000\common\backups.dat
Wed Nov 04 23:47:07 2009 RescueRecovery: loadBackups() - deleteRegistryKey SOFTWARE\Lenovo\Rescue and Recovery\Backups\Second, \common\backups.dat
Wed Nov 04 23:47:08 2009 RescueRecovery: loadBackups() - deleteRegistryKey SOFTWARE\Lenovo\Rescue and Recovery\Backups\USB, \common\backups.dat
Wed Nov 04 23:47:08 2009 RescueRecovery: In GetBackupFolderName, get local UUID!
Wed Nov 04 23:47:08 2009 RescueRecovery: C:\Program Files\Common Files\Lenovo\Scheduler\tvtschedinterface.dll
Wed Nov 04 23:47:08 2009 RescueRecovery: g_pTVTSchedulerInterface is NULL!
Wed Nov 04 23:47:08 2009 RescueRecovery: Get back from GetTaskNextRunTime and return value is 0, next run time is 2009-12-1 12:0:54
Wed Nov 04 23:47:08 2009 RescueRecovery: Set LOCAL to UUID and reload backup before delete backup!
Wed Nov 04 23:47:08 2009 RescueRecovery: In GetBackupFolderName, get local UUID!
Wed Nov 04 23:47:08 2009 RescueRecovery: loadBackups() - deleteRegistryKey SOFTWARE\Lenovo\Rescue and Recovery\Backups\Local, C:\RRbackups\SZ\0000000000000000-0000000000000000\common\backups.dat
Wed Nov 04 23:47:08 2009 RescueRecovery: loadBackups() - deleteRegistryKey SOFTWARE\Lenovo\Rescue and Recovery\Backups\Second, \common\backups.dat
Wed Nov 04 23:47:09 2009 RescueRecovery: loadBackups() - deleteRegistryKey SOFTWARE\Lenovo\Rescue and Recovery\Backups\USB, \common\backups.dat
Wed Nov 04 23:47:17 2009 RescueRecovery: Loc=1 NoPrimary=0
Wed Nov 04 23:47:17 2009 RescueRecovery: In GetBackupFolderName, UUID is 0000000000000000-0000000000000000!
Wed Nov 04 23:47:17 2009 RescueRecovery: loadBackups() - deleteRegistryKey SOFTWARE\Lenovo\Rescue and Recovery\Backups\Local, C:\RRbackups\SZ\0000000000000000-0000000000000000\common\backups.dat
Wed Nov 04 23:47:17 2009 RescueRecovery: In GetBackupFolderName, UUID is 0000000000000000-0000000000000000!
Wed Nov 04 23:47:17 2009 RescueRecovery: loadBackups() - deleteRegistryKey SOFTWARE\Lenovo\Rescue and Recovery\Backups\Local, C:\RRbackups\SZ\0000000000000000-0000000000000000\common\backups.dat
Wed Nov 04 23:47:22 2009 RescueRecovery: Get the shutdown flag from service is 0
Wed Nov 04 23:47:22 2009 RescueRecovery: Get the shutdown flag from service is 0
Wed Nov 04 23:47:29 2009 RescueRecovery: Running: C:\Program Files\Common Files\Lenovo\msgbox.exe /t=56 /id=65 /wait
Wed Nov 04 23:47:29 2009 RescueRecovery: In CreateSpecialBackupFolder, get szBackupFolder is C:\RRbackups\SZ\0000000000000000-0000000000000000
Wed Nov 04 23:47:29 2009 RescueRecovery: CreateSpecialBackupFolder: szBackupFolder= C:\RRbackups, szMidiumFolder = C:\RRbackups\SZ
Wed Nov 04 23:47:29 2009 RescueRecovery: Running: icacls "C:\RRbackups" /inheritance:r
Wed Nov 04 23:47:29 2009 RescueRecovery: Running: icacls "C:\RRbackups" /grant:r *S-1-5-18OI)(CI)F /T /C
Wed Nov 04 23:47:29 2009 RescueRecovery: icacls Legacy folder: C:\RRbackups\*
Wed Nov 04 23:47:29 2009 RescueRecovery: icacls Legacy folder: "C:\RRbackups\SZ" /inheritance:d
Wed Nov 04 23:47:29 2009 RescueRecovery: Running: icacls "C:\RRbackups\SZ" /inheritance:d
Wed Nov 04 23:47:29 2009 RescueRecovery: Running: icacls "C:\RRbackups\SZ" /grant:r *S-1-1-0OI)(CI)F /T /C
Wed Nov 04 23:47:29 2009 RescueRecovery: Running: icacls "C:\RRbackups\SZ" /inheritance:d
Wed Nov 04 23:47:29 2009 RescueRecovery: Running: icacls "C:\RRbackups\SZ" /grant:r *S-1-1-0OI)(CI)F /T /C
Wed Nov 04 23:47:30 2009 RescueRecovery: Running: icacls "C:\RRbackups" /remove *S-1-1-0
Wed Nov 04 23:47:30 2009 RescueRecovery: Running: icacls "C:\RRbackups" /remove *S-1-5-32-544
Wed Nov 04 23:47:30 2009 RescueRecovery: getting index is 1
Wed Nov 04 23:47:32 2009 RescueRecovery: BackupThread Started. There are 1 partitions to back up
Wed Nov 04 23:47:32 2009 RescueRecovery: Running: C:\Program Files\Lenovo\Rescue and Recovery\instapps.exe /capture
Wed Nov 04 23:47:33 2009 RescueRecovery: Running: C:\Program Files\Lenovo\Rescue and Recovery\Migration\bin\r2r.exe /c "C:\SWSHARE\capture.sma"
Thanks in advance for any help.

I have:
1. Instslled a new 160GB, 7200 RPM Lenovo HDD
2. Clean installed Win 7 Ultimate (retail) x64
3. Clean installed all Lenovo and Microsoft Win 7 x64 updates
On my:
Lenovo T61p, T7700 2.4 Ghz, 4 GB Ram
I downloaded Rescue and Recovery..tvtvrnr43_en.exe and saved it to my desktop.
When I go to install the RnR I get the following error message:
"Microsoft Visual C++2005 Redistributal (x64) SP1 needs to be installed before you can install RnR".
One of Microsoft's important updates was the above MS Visual C++ which I installed.
I phoned Lenovo support in Atlanta and they said they offer no support on a retail version of Win 7. They
said that I was "missing some kernal" that came with the original OEM software which isn't on a retail clean
install. I'm baffeled since all other Lenovo Win 7 updates were able to be installed and are working properly.
I'm stuck. Any Suggestions please.
Thanks,
Altoid666
T530,Core i7-3820QM,16GB Ram, Intel 530 SSD 240GB, Blutooth 4.0,Ultimate-N 6300, 15.6 FHD, Nvidia NVS 5400M., All software current.,
Windows 7 Ultimate x64 , SP1. Office 2013 Professional

Rescue and Recovery 4.5: Boot Environment does not list Backups on USB Drive

Hello,
I have a fresh installed Windows 7 on a X 230 and am now setting up my backup. The notebook came without an OS so I installed Win7, all drivers and the Thinkvantage Software myself. Then I made a backup with Rescue and Recovery 4.5 to an external USB 3.0 HDD. The Backup is listed in the Windows program, but when I boot to Rescue and Recovery, the backup is not listed.
Since there arent any options I could change during the backup or the recovery, I have no idea what went wrong..
Thanks!

In the standalone boot of RNR, go to the advanced GUI, chose Restore. After a few screens, you will see a restore from location, default is Local Hard drive. This is a drop down list. USB option is available in the drop down list. The USB must be connected during the standalone boot. If the backup is NOT the same UUID as your system, check the box that says show backups from all systems.
Also read my post dated Nov 22,2011 . RNR backup reverts to local. This may not apply to USB backups.

Rescue and Recovery 4.3 on Win7 doesn't see a backup on external USB hard drive - Model W510

I've run the Rescue and Recovery utility within Windows 7 on two different external USB hard drives thinking that maybe it was a usb drive issue. When I open the R And R utility in expert mode I can see that both backups exist on their respective drives. I planned on updating my hard drive so I made a full hd backup and the R&R startup disc to boot the laptop from. The bios recognizes either external hard drive at boot with no problems. It shows the names and "+" sign next to drives. So I booted the drive at startup off the DVD drive with the R&R startup disc after I was sure that the bios recognized either external drives. Then when I choose a "Full" restore is of course asks me if I want to use hd, cd/dvd, or external usb drive which I choose the later. It then should show me the backup that I created earlier just as it did when I ran the utility from the Win7 environment so I can choose it to restore from. But I get a blank box showing no backups when I run the 4.3 R&R Startup disc. Again if I boot to Win7 and go into the R&R utility I can see the backup on the exact same USB external drive. Then boot off the CD startup recovery disc and it shows NO BACKUP! Help please! I want to shelf my old hard drive "as is" and create the Restore onto the new hard drive but the utility isn't working for me.
Thanks for any help.

Hmmm,
Seems like that _should_ work. Here's a way you might be able to finesse it: go to the advanced R&R menu in Win 7 and create rescue media on your USB drive. It's essentially the same process as creating the CD - it makes the USB drive bootable and puts a copy of R&R there.
There _should_ be an option to "preserve existing data" but be prepared to lose your existing backup and make it again.
Then just boot the external USB drive and see if R&R recognizes a backup image on the same drive from which you booted.
That's the way I usually migrate to new drives. Maybe it will get around your mysterious problem.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Possible to create a rescue and recovery USB disk?

When you create rescue and recovery media, there's an option showing "USB hard disk drive". However, the target drive list is always empty. How could I get it work? I have plugged my usb-hard disk to my laptop (T400).
BTW, it's possible to create the recovery disk using my usb key?

Probably a good question for ForumNokia. If you mean start up a thread and run in the background while your MIDlet UI does other things, then sure, why not. If you mean that you want to exit your MIDlet, but leave a thread running in the background, then I don't believe you can do this on series 40. S60 is another story since it supports multiple tasks.

Rescue and Recovery Not Finding Backups On USB Drive During Restore

Currently running Windows 7 Pro 64-bit on a W510. Rescue and Recovery cannot find my backups on the USB drive when trying to restore. They can be seen when not in restore mode. There are two partitions on the USB drive. The second contains the backups. I also tried plugging the drive into a server to access it as a network drive with the same result. R&R version 4.30.0025.00. I do not believe it has changed since I started the backups.
Solved!
Go to Solution.

Just a think, I'm pretty sure is about your version of R&R. Just between R&R4.30 and 4.31 is not compatible.
Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

Rescue and Recovery not recognizing USB DVD writer on X200

I have a SAMSUNG SE-S084B USB CD/DVDRW that reads/burns DVD-R ok in ImgBurn. I already have backup made on the hard drive by RR.
I tried to use the Rescue and Recovery Advanced mode -> menu-Advanced -> "Copy backup from hard drives" to make a set up of backup on the DVD-Rs. However, RR doesn't recognize my USB DVD writer, and therefore I cannot proceed the backup.
Please advise how to make backups on a DVD for Thinkpad X200. Thanks a lot!

I got it!
You just need to be patient. It can take up to two hours.
I wasted about 30 minutes in the fine quality customer support of inner-city Atlanta just to be told it takes that long. 30 minutes.
I am extremely unimpressed with Atlanta customer service, and the rep's advice after 25 minutes was that he was going to send me a couple more recovery disks! He had no idea about anything I was talking about. I complained to the manager who finally told me to just wait. However when I complained to him he thought it was a joke.
Customer service in Lenovo, especially their Atlanta location is a farce. You're welcome for me having to sit through that.

Rescue and Recovery tool - problem with recovering files stored on USB memory stick

I recently had to use the Lenovo Care Rescue and Recovery tool to restore my 300 N200 to a previously backed up state.
As part of the Rescue and Recovery I selected the option to save user data in My Documents to a USB memory stick before restoring to the backup. This seemed to be successful (tool confirmed that 300MB of files were saved). But when I wanted to restore the files from the USB memory stick back to the laptop none of the folders/files is visible.
I checked the memory status of the USB memory stick and this confirms that 300MB space is taken up - but no files visible!!!
Can anyone help??

ttt

Rescue and Recovery -- USB external hard drive

Can anyone recommend the best external hard drive to use for Thinkvantage Rescue and Recovery? I've been doing some research and I'm concerned about the Maxtor "one touch" software. If I choose to purchase a Maxtor external hard drive should I go in and delete any software on the drive before I back up from Rescue and Recovery? I have been having a lot of problems with Rescue and Recovery -- it's difficult to delete past backups, and I get hangups. But eventually it usually backs up. I have read reviews for the Maxtor one touch software and it sounds like it doesn't work well for restoring an entire system (problems with certain files, such as hidden files, etc.). But maybe that's not true? Also, do you recommend that I delete all previous backups before running a Rescue and Recovery backup? If not, if I ever had to restore from it, would it automatically use the most current backup?
Thanks in advance for any advice! I'm a novice, but I want to make sure that everything is backed up properly.

Herik,
I'm not sure I'm looking in the right place - the folders you specified don't exist, or they aren't where you indicated. I can only get to "Rescue and Recovery" in the HK - Local Machine registry folder - nothing further there. Here's what I have:
http://files.iclippy.com/109436/1251279402.jpg
Am I looking in the right place?
Note from Moderator: Image(s) >50k converted to link(s).
E
Thinkpad R40 2897-54U running Windows XP Pro

Rescue and Recovery Won't Open on My R61i Laptop

Computer: 2008 Lenovo R61i Laptop with Windows XP, SP 3, 2 GB RAM, Intel Duo Core processor, 34 GB free on the hard drive
I had been wondering why my 160 GB hard drive was filling up even though I only have 10 GB of documents, photos, and videos saved, so I downloaded a little program called windirstat, and it told me that 50 GB was being used for RRbackups. Google told me what that is, and I opened it and checked to see how many backups were there (it said 5, counting an initial "basic" backup). I attempted to delete the newest one, but I can't tell if the process finished, and now I can't get Rescue and Recover to even open. I have defragged my hard drive, I have tried it in SAFE MODE, nothing works.
Here are my questions and additional info:
Is the initial "basic" backup where the backup of the Windows XP operating system is located? (I'm guessing that if the answer is "yes," then I don't want to delete that backup.) The size of this backup is 36 GB.
If so, could that backup be moved to an external hard drive and still be usable?
I also have Go Back (keeps a compressed image of my hard drive on the same drive for restoration of files and reverting the hard drive to a previous status). I have used this program for years and would rather use it that Rescue and Recovery for incremental backups because it's automatic and updates more often.
I also now use Carbonite, so I may need to rethink how I should use R & R and GoBack.
I'm thinking that I would like to keep the R&R initial back for Windows files but tell R&R to not to any more backups, then continue to use GoBack and Carbonite.
The primary problem at the moment is that R&R won't open at all, so I can't delete any backups and I can't tell it to stop trying to do incremental backups. HELP!
Thanks in advance,
Jim King

Hi,
can you please describe, how did you tried to delete the RnR backup? Using GUI, or manually in the RRbackups?
NOTE: The files stored in the RRbackup are encrypted and each file has also a metadata file, that conatins the informations on the purpose of that one file and some other usefull informations for RnR so that the restore can work.
Here are the answers on your questions:
1) If I understand it correctly, then the answer is YES. In case you have placed all the RnR backups localy, then the basic/initial backup and also the other incremental backups are stored exactly in the RRbackups folder.
2) YES, you can move it, BUT not manually. You need to use the RnR GUI to copy/move the backup on a network drive, or USB HDD. You can read more about this option in the Manual for RnR (sorry I don't want to describe it in here, as this is a bit longer description). So please review following guide:
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkvantage_en/rnr43dg.pdf
Page 61 describes this process using the rrcmd.exe utility.
3) I think, this is just a note
4) same here
5) In this case, it's of course possible to keeep just the original/inicial backup. In case you don't want to do any other backups, then you just make sure, that you dissable the scheduler of RnR and don't do any other backups.
6) For this situation, the crucial point is, what did you deleted in the RRbackups. However, the first point, that I would do is to reinstall, or repair RnR. NOTE: Please use the same package, or the package, that is stored on your system. From Add/REmove programs.
Please let me know, if you have any add questions to this situation.
Cheers

How to restore Thinkpad T43 or R52 using rescue and recovery CD's

The genuine IBM Recovery CD Set will re-install your ThinkPad T43 or R52 (listed types only) with the original pre-load factory software, including Windows XP Professional with a legal, valid license, and all the original IBM Drivers and applications.
1. Set your Laptop to Boot From the CDROM Drive.
IT MAY ALREADY BE set to boot from CD if a bootable disc is in the drive so try and see if it does first with the disc labed 'rescue and recovery'. If it does then just skip to step 2. If it does not then you will have to enter the computers BIOS setup to tell it to.
NOTE: When in the BIOS SETUP DONT CHANGE ANYTHING ELSE if you are not absolutely sure what you are changing.
ACCESSING THE BIOS:
During startup at the first screen (says "IBM Thinkpad") press F12 then F1 to enter the bios setup program.
Use keys to navigate to 'startup' then to 'boot'. Press enter and following instructions in the right hand panel move the items to make your CD or DVD drive (Atapi CD0) AHEAD of your main hard drive (IDE HDD0). It doesn't matter if 'legacy floppy or USB are ahead of either of them if they are not connected. PRESS F-10 TO SAVE AND EXIT the bios setup program.
2.Restart the computer with the first disc i.e. Rescue and Recovery CD already in the drive. The recovery program will come up. A smaller window will come up.
3.Follow the on screen prompts.
Choose to restore to Factory Specifications to Install OS, Applications and Drivers
At some point it may ask if there is a supplemental disk. This is the one that says 'Lenovo'.
4.Follow on screen prompts (i.e. insert disk 1)
5.The prompts will continue to ask for the discs in numbered order.
6. Follow the instructions on the screen to restore laptop to factory settings
7. Do not boot directly to the hard drive until the entire recovery process is complete i.e until you have used all the recovery cds for the set.
8. During the recovery process the computer will reboot multiple times. Do not do anything to interrupt the process unless you are asked to insert any specific disk.
AT THE END:
Promps may ask for the supplemental disc again, follow the on screen prompts.
Computer will restart, you may see the original recovery screen. BE PATIENT, The files still have to expand. You may not see any prompts for a couple of minutes.
SOMETIMES: (I dont know why)
After loading all the discs and after it takes you to the recovery program if nothing happens AFTER A GOOD PERIOD OF TIME, BE PATIENT, remove all discs and click on restore factory contents AGAIN. It will expand all the files (takes a while) and restore your system.
Afterwards computer will restart multiple times as it continues to load windows, programs and drivers. Follow all the on screen prompts until it is done.
Once everything is done go to microsoft (All Programs > Windows update) and load all new service packs and updates.
Partially taken from the internet and written for a customer. Tried and tested. PLEASE ADD TO KNOWLEDGEBASE.
NOTE: instructions may also be valid for other Model Thinkpads.

NNNNN wrote:
SOMETIMES: (I dont know why)
After loading all the discs and after it takes you to the recovery program if nothing happens AFTER A GOOD PERIOD OF TIME, BE PATIENT, remove all discs and click on restore factory contents AGAIN. It will expand all the files (takes a while) and restore your system.
IIRC this was the normal recovery/restore procedure for older ThinkPads. First the recovery image is installed, then the machine reboots to Rescue and Recovery to use that image to restore the rest of the hard drive. User input is required at that point to select restore.
Newer machines combine both operations.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Rescue and Recovery 4.5. Rescue media can't boot from FAT32 64GB flash drive.

T530 Windows 7. I did a full (base) backup to a 64GB USB flash drive formatted FAT32. R&R started by indicating “Rescue and Recovery Medium being created” and after a few hours finished the backup. When I click on ‘View all backups’ I can see the backup created. I then tested the flash drive to see if it’s bootable but the screen only shows rapidly moving white font gibberish over black background. I did the same as a test on a 8GB USB flash drive formatted NTFS (I had to stop the backup since 8GB was not enough space) but had no trouble booting from it. Both flash drives have the folders: boot, efi, Preboot, RRbackups, tvtos and files: bootmgr, bootmgr.efi, fcopy.ini. In other words, the only difference seems to be that it works with 8GB NTFS but not with 64GB FAT32. Is that the issue or just coincidence?
Solved!
Go to Solution.

The readme file for RNR 4.5.1 states:
Consideration 7
Unable to boot from a 64 GB USB memory key
When you create rescue media on a 64 GB USB memory key and then boot your computer from the memory
key, an error message is displayed, saying, ?¡ãError loading Operating System.?¡À
To solve the problem, change the 64 GB USB memory key to one with less storage capacity.
===
The question is.. is your Flash USB a memory key?
I would reformat the 64GB to NTFS, then run the Create Rescue Media option onto it. Then try to boot the USB.
There is another post out here stating on certain USB sticks, you have to PREFORMAT it, using diskpart command, before using the Create Rescue Media option..
This link might help:
http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-74246

Rescue and Recovery 4 DOES NOT RESCUE/COPY LARGE FILES?!

Hello all,
Thank you in advanced for helping me out/any helpful advice you may have.
System:
Windows XP Professional
T61
4 GB RAM
2.50 Ghz Dual Core Intel Processor
120 GB Hard Drive
140m nVidia Quadro video card (256 MB available memory I believe)
Problem Summary:
I ran into the unlucky computer problem of having a Microsoft.net framework addon for Firefox 3.5.3 result in a fatal interaction leaving me unable to boot up in both safe and normal mode. If you do have this addon, please uninstall it NOW, so that it does not happen to you. There is no current fix or patch for it as far as I know. Luckily, I have the (formerly) fantastic Rescue and Recovery 4 to backup my files and fix things.
So in sequence of what I did:
Tried several different attempts to fix problem to no avail (via google searches on the Rescue and Recovery Browser)
Decided that it would be best to just reformat the drive and start a clean install.
I had not done a real back up recently (several months due to my own carelessness and being busy).
I chose to do a full factory restore using the 'Rescue My Files' option, since I had never done a backup using the included Lenovo Software, I usually just ran my own manual ones in Windows.
To be on the safe side, I just decided to transfer my entire hard drive directory 'C:' to my 500 GB External Western Digital Hard Drive. I know I didn't really NEED all the files (like program files I would just need to reinstall anyway). I just wanted to return my computer to how it was as fast as possible.
Rescue and Recovery registered as copying all my data (rougly 50-60 GB) of data to my external USB Hard Drive.
I then unplugged my External USB Drive From the computer once it said it was complete. Rescue and Recovery proceeds with the factory restore.
Things are going well, factory restore is successful, no problems yet.
Once Windows was functional again and I had remade my usernames and settings just as it was before the crash, I plugged in my External HD again to restore my files.
Every file that I copied was there EXCEPT FOR MY MOST IMPORTANT ONES. It appears the directory, 'C:\Documents and Settings\Justin\My Documents'
AND
'C:\Documents and Settings\Justin\Desktop'
DID NOT COPY. I DID A DOUBLE CHECK, and the program said that all files had transferred successfully and I saw the directories on the USB Hard Drive in the Rescue and Recovery View. (I did not do a double check on another windows computer with my USB Hard Drive, however as I did not have access to one at the time and I was trusting in the Lenovo software, which did actually manage to rescue all the files, except for my most important ones.)
Is there anyway way that:
That because these files were so large (probably account for 50% of all data copied to my external USB Drive or 10-15 GB a piece), that the Rescue and Recovery file simply "passed over them"? The other files appeared to copy perfectly fine.
There was an error with the program, like a file size limit cap that Rescue and Recovery cannot surpass so they were just skipped over?
My own carelessness? Are all the root files not selected when you choose the entire 'C:' Drive as a directory? I did just choose to copy/rescue the entire 'C:' Drive and everything else (besides my two most important files) seemed to copy over so I do not beleive that this is the case.
I did not individually, select each file in the 'C:\Documents and Settings' because I assumed that it would select each of the root files within it. (Is that not the case?)
That the files are 'hiding' somewhere due to their large size?
Most importantly of all:
IS THERE ANYWAY THAT I CAN RECOVER MY DATA? There is about 2 years worth of photos, music, documents, etc. that I would like to have back that I do not have a recent back up of.
If anything, does anyone know WHY this happened? It was my understanding that Lenovo Rescue and Recovery was some of the best software for emergency crashes out there. And now it has failed me miserably. I'd at least like to know why it happened so that I may not repeat my mistake (or put too much faith in Lenovo) for the future.
I've run some data recovery software but I know it will not recovery all the files that I once had in their state before my hard drive was reformatted back to factory settings.
Thank you,
-nofeet3
Justin

Hello , and ARGH !
I AM HAVING THE EXACT SAME PROBLEM RIGHT NOW !
If anybody could help this would really be appreciated .
Here is the story
Lenovo SL500
Windows XP SP3 I think
Specs maybe not too important
My computer has some corrupted file and will not boot in normal or safe mode . When I try to do either , it starts booting , but before it finishes the load-up-windows screen , it displays an error message which says
" lsass.exe - System Error
the endpoint format is invalid "
and then goes no further , and the machine simply restarts itself again and would do this indefinitely if I didn't stop it .
SO when it starts booting and shows the Lenovo Logo , I press the Lenovo Help/Tool Button to enter Rescue and Recovery [not sure what version it is , I cannot find information within it] and it gives me the option to Rescue files before recovering the system . I have the same problem as Nofeet3.
It rescues all the small files
BUT WILL NOT RESCUE ANY OF MY IMPORTANT FILES
CERTAINLY IT DOES NOT RESCUE ANYTHING BIG [or bigger than roughly 2mb]
It rescues picture files BUT WILL NOT RESCUE MUSIC FILES !!
It may not even rescue bigger picture files , but I haven't noticed any pictures it has not copied since I can't go through ALL my picture files to see exactly what it has / hasn't copied.
However , not a single music file is copied.
It will NOT show up on the hard drive . What is strange , is when I try to plug the hard drive back in to try and copy the music files again , as I tried it a few times , it asks me if I would like to Write these files over the files already there , as though it has already copied. I check the hard disk , and these fils have definitely NOT copied onto the Disk . They are nowhere to be found .
I don't think the files are hiding , but if they are , maybe somebody could tell me where.
I suspect though that Rescue and Recovery has "recorded" the files as having been copied , some kind of record , EVEN THOUGH THEY HAVEN'T !! Or if they have , they are absolutely invisible . WEIRD !
nofeet3
It is NOT because you selected the whole C drive , and is not due to any carelessness on your part. I have selected all files individually , and have tried time and time and time again , when I plug the ext hard drive into my other laptop to see if the files copy , they don't . I have tried this over and over and over again desperately all today , it is not working , even going so far as to select individual files rather than bigger directories to try and transfer in smaller in smaller batches ,just in case it couldn't handle large transfers all at once . That is not the case either . It just simply will not transfer files roughly bigger than 2mb . NO MUSIC !! THIS IS VERY FRUSTRATING !!
I am not sure at present whether this program can rightly be called "Rescue and Recover". It is one of the main reasons I selected Lenovo , and this is not a good demonstration of it's abilites at all .
PLEASE HELP ME !!
ANY HELP WOULD BE HIGHLY APPRECIATED !!
Thanks so much in advance for any help anybody can give , and best regards ,
Carl .

Rescue and Recovery 4.3 for Windows 7, installation

Hello,
I purchased my system June 16, 2009 with Vista downgraded to XP Pro so I was not able to purchase a upgrade disk from Lenovo.
This week I purchased the Windows 7 64 bit Home Premium upgrade package at a local store.
I did the upgrade (clean install) Windows 7 64 bit Home Premium on my ThinkPad T400 type 2764-CTO. Also successfully installed all Win 7 64 bit ThinkVantage software with System Update 4.
I downloaded Rescue and Recovery 4.3 for Windows 7
The documentation for the installation of R&R 4.3 is difficult to comprehend and I could not find a post on this board that deals with my topic.
The recommended procedure before installing Rescue and Recovery on computers running the 64-bit version of Microsoft Windows 7 is:
you must download and install the Microsoft Visual C++ Redistributable Package (x64) SP1.
That was done with no problems!
To make the Rescue and Recovery program work with Sysprepbackup in the Windows 7 operating system, you must download and install the Sysprepbackup accessory package.
The Sysprepbackup operation changes in the Windows 7 operating system because a new version of Windows Recovery Environment (Windows RE) is built in the Windows 7 operating system. When you run the System Preparation Tool (Sysprep) and use the /generalize option, the Sysprep operation disables Windows RE by removing the Boot Configuration Data (BCD) entry to the Rescue and Recovery Pre Desktop Area (PDA). To make the Rescue and Recovery program work with Sysprepbackup in the Windows 7 operating system, you must download and install the Sysprepbackup accessory package.
and here starts my problem installing the package!
Instruction:
To install the accessory package in the Windows 7 operating system and take a Sysprepbackup on a USB hard disk drive, do the following:
Type the following commands to start the Sysprepbackup process using administrative privileges: cd "\Program Files\Lenovo\Rescue and Recovery" rrcmd sysprepbackup location=U name="sysprep backup" The "...run sysprep now..." message displays. Note: Before you take a Sysprep backup on the USB hard disk drive, make sure that there is at least one backup on your local hard disk drive.
Go to the C:\Windows\Systme32\Sysprep directory and launch the sysprep.exe file. The System Preparation Tool window opens.
Be sure to select Quit from the Shutdown Options drop-down list box. Click OK to save the setting. The Sysprep process begins.
When the Sysprep process is completed, run the msi file that you downloaded using administrative privileges. Wait until the package is successfully installed.
Restart your system. Then, it will automatically boot to the PDA to continue with the Sysprepbackup process on the USB hard disk drive. For the detailed parameters about the restore operation commands using RRCMD, refer to the Rescue and Recovery 4.3 Deployment Guide. Software versions to use with this release.
3.At the end Install the Rescue and Recovery 4.3 package.
Ok that should be simple to do.
What is "Sysprepbackup" and do I need to follow the installation procedure above to be able to install and run Rescue and Recovery 4.3 for Windows 7. I dont think I need to or want to do a "Sysprepbackup on a USB hard disk drive". or may be I will when I understand what it is.
Can I simply install the Microsoft Visual C++ Redistributable Package (x64) SP1 and the the Rescue and Recovery 4.3 package.
Thank you
Solved!
Go to Solution.

I installed Win 7 Pro 64 on my T400, ran TVSU and installed R&R 4.3. Fortunately, I didn't read those instructions first, or I might not have done it
Have you tried just installing R&R? If it needs anything else, it should ask for it during the install. IIRC, it does require the VCC+ package.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Rescue and Recovery to USB

Similar Messages

Maybe you are looking for