Rescue & Recovery blue screen on T60 with XP and SSD

Hi everyone.
On my T60 (2008-VPT) with Windows XP SP3, I installed an SSD (Verbatim 240 GB). I've done a clone of the old HD on the new SSD and than I installed it on the T60.
All is fine, but when I try to do a backup with Rescue & Recovery 4.23, after 1 hour BLUE SCREEN appair.
With the paging file the message was KERNEL_STACK_INPAGE_ERROR, I set No paging file, but another time blue screen, without precedente message but only with code error 0x000000F4 (0x00000003, 0x898E9DA0, 0x898E9F14, 0x805D22AA).
Any Idea?
Thank's a lot for your help
Fabrizio
Solved!
Go to Solution.

Hi
Welcome to Lenovo Community
Please try to uninstall the Rescue & Recovery  then reinstall the same
And try backup again
Hope This Helps
Cheers!!!

Similar Messages

  • Blue Screen of Death with XP and E1000

    I am getting the blue screen of death on my Thinkpad running XP and wireless G with E1000 router.  I have narrowed it down to issues with my wireless connection, but am wondering if I setup the router incorrectly.  Any suggestions?

    My XP ThinkPad didn't quite get to that blue-screen point, but it was no fun. The driver update mentioned previously is important (I updated both wired and wireless drivers at the same time) as is fully updating/patching XP.
    Access Connections was causing me more trouble than it was worth, so I uninstalled that.
    I think those were the three crucial steps (on the computer side anyway) that finally got things working.

  • I have an iMac from 2008.  When I start I get gray screen with apple and turning gear. Next blue screen. Then light blue screen with turning gear. Back to blue screen.  Now just back and forth blue to light blur

    I have an iMac from 2008.  When I start I get gray screen with apple and turning gear. Next blue screen. Then light blue screen with turning gear. Back to blue screen.  Now just back and forth blue to light blur

    Reinstall OS X:
    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
    Reinstalling Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Continue button.
    Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

  • I get a blue screen; tried the single boot and get "audit space low"; how to I get the computer to start again?

    I get a blue screen; tried the single boot and get "audit space low"; how to I get the computer to start again?

    In the text you say you are using Snow Leopard. Snow Leopard will not operate on a G4 (or any Mac with a PowerPC processor). Leopard OS 10.5 is the max OS for PowerPC processor Macs. Your profile shows OS 10.5.6. What OS are you using (or trying to use)?
    Will the PB boot using a systen install DVD?
     Cheers, Tom

  • .mov from 4S is black screen when played with QT and QT 7/lion

    Q1. .mov from 4S is black screen when played with QT and QT 7 on lion/mac book pro.
    Q2   Also I want to burn it in DVD with common video format. Any recomment free burner software?
    Very very very urgent!! Please help.

    Hello there,
    I have a similar problem! Windows 7 shutdown unexpectedly and since that I can not reboot in windows anymore only with safe mode where everything is a mess.
    Also when it's trying to reboot in windows a blue window appears,says something about drivers  and it is counting something (79.78...till100)but  I m not able to read it cause it disappears immidiately and then black screen and then it turns to reboot in mac which works fine.
    I m sorry if I confused you with my english...
    If anyone knows please help!
    Thanks

  • My wifes ipad 1 went to a blue screen. I restored it and still nothing.  Is there any other fixes?

    My wifes ipad 1 went to a blue screen. I restored it and still nothing.  Is there any other fixes?

    My guess, based on your info and the fact that the shuffle is an older model, is that the shuffle's battery is worn out and not holding a charge.  When you plug it in, it functions because it is getting power from the USB connection and appears to charge.  When you disconnect it, it goes dead because battery does not hold the charge.
    Since you have already tried doing a Restore, the problem is hardware and not software.  Unless you want to do the work yourself
    http://www.ifixit.com/Guide/Installing+iPod+Shuffle+2nd+Generation+Battery+Repla cement/3656/1
    the cost for replacing the battery probably exceeds the $50 for a new 4th gen shuffle.

  • I have a blue screen on my iphone 5s and turn off !! what can i do !????

    I have a blue screen on my iPhone 5s and it turn off ,, what can I do to turn it on ???

    Hi there mayan hassan,
    I would recommend taking a look at the troubleshooting steps found in the article below. 
    iOS: Not responding or does not turn on
    -Griff W.

  • I have a blue screen on my ipod 4g and it will not do anything? What do i do?

    I have a blue screen on my ipod 4g and it will not do anything? What do i do?

    Try resetting:
    Hold the home and power buttons at the same time until the Apple boot logo appears. No data will be lost.
    If that doesn't work, just let the battery drain. Once you charge it back up it should work as normal.

  • Tips for blue screen (BSOD) errors with Windows Vista and Intel Turbo Memory on X61/X61s

    Important note: The symptoms and solutions described below address only a small subset of the possible causes for blue screen errors, aka BSOD.
    This information can help address blue screen errors specifically
    related to Turbo Memory, but may not solve errors related to other
    issues. Please read through the instructions completely, make sure they
    apply to your system, and after attempting the solutions please post
    back with your feedback for the community.
    Some users may experience random blue screen errors with ThinkPad
    systems running Windows Vista with Intel Turbo Memory hardware. These
    blue screens may occur during normal usage on the system or they may
    occur when booting into Windows Vista. Blue screens related to the
    Intel Turbo Memory hardware may reference a stop code of 8086 with
    memory address locations of {0, 0, 0, 0}.
    There are two main steps that you can take to help resolve blue screen issues related to Intel Turbo Memory.
    Step 1: Update Intel Turbo Memory Driver
    If the driver version is before version 1.0.1.1004-7.0.3.1001, please
    update to this version.
    To determine what version of the Intel Turbo Memory driver is installed:
    1.    Click Start, then click Control Panel.
    2.    Click System and Maintenance.
    3.    Click System.
    4.    Click Device Manager.
    5.    Expand the Storage controllers category.
    6.    Double-click Intel Flash Cache Logic Chip.
    7.    Click the Driver tab. Then you will see the driver version (for example, 1.0.1.1004).
    The new driver and installation instructions can be found here.
    Note: The Intel Matrix Storage Driver is updated with this package.
    Step 2: BIOS version
    If your BIOS version is older than those listed below, please update to the version listed.
    How to check your BIOS version:
    Turn off the system.
    Turn on the system.
    While the To interrupt normal startup, press the blue ThinkVantage button message is displayed at the lower-left area of the screen, press the F1 key.
    The
    BIOS Setup Utility menu will be displayed. If you have set a supervisor
    password, the BIOS Setup Utility menu appears after you enter the
    password.
    Check BIOS Version and Embedded Controller Version.
    Turn off the system.
    System BIOS versions:
    ThinkPad X61 or X61s - BIOS version 1.06 (7NET25WW)
    Please
    remember that these updates do not solve every possible system blue
    screen, but they do resolve several problems related to the Intel Turbo
    Memory driver.
    Tim Supples
    Lenovo Social Media
    Got a question? Don't PM me, post it on the forum!
    Lenovo Blogs
    X60 Tablet SXGA+ primary, Z61p fully loaded workhorse

    Dear Tim,
    First off, many thanks for the tips for resolving BSOD with Vista + Turbo Memory on X61.  I've been suffering from this BSOD for countless times since I bought in my X61 7673-CW9 in April 2008.
    Even prior to having the pleasure to visit this wonderful forum, I followed both steps as indicated, and updated my Intel Turbo Memory driver to 1.5.0.1013 and my BIOS to 7NETB4WW (2.14).  However, the BSOD recurrs.
    For the past two months, I've recovered my system to factory default settings using Rescue and Recovery for over twenty times, each time with the latest Intel Turbo Memory driver and BIOS.  Notwithstanding that, BSOD recurrs.
    During these painful experiences, I tried two options: 1) making my X61 up-to-date by using System Update and Windows Update (including Vista SP1 or excluding Vista SP1); 2) keeping my X61 the status as factory default (i.e. without updating through either System Update or Windows Update (the automatic/scheduled update function of both is turned off)).  In either case, BSOD recurrs.
    I'm 100% positive that the BSOD does not arise from any hardware or software/firmware I install.  I never install any hardware (e.g. RAM).  And, it is not caused by any software/firmware I install: the clear and unequivocal evidence is that at one time,I encountered BSOD while having restored back to factory setting and booting for the first time.
    I live in Taiwan, and I seldom heard this BSOD here.  All of my friends (as most of Taiwan residents) using X61 operate in Traditional Chinese environment, whereas I operate in English environment.  In Taiwan, when booting for the first time after purchase/recovery, the Windows Vista Business system provides for lanuage choice (Traditional Chinese or English), and, once chosen, the language cannot be altered later on (unless, of course, the system is restored back to factory default settings).
    My system specs are the same as the day I purchased it and are listed below (as I'm not sure if my machine type X61 7673-CW9 is applicable outside Taiwan):
    Processor: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.4GHz
    Memory: 1.00 G.B.
    System: Windows Vista Business (32-bit)
    Hard Drive: 160 G.B. @ 7,200 r.p.m.
    And, of course, with Intel Turbo Memory 1 G.B.
    I contacted the Lenovo support staff here in Taiwan for countless times, but they seem to be clueless.  I learned that some friends at this forum downgraded their OS back to Windows XP, but I chose not to.  The reason is simple: my purchase price for X61 7673-CW9 includes the Intel Turbo Memory, which cannot function under Windows XP (at least so far).
    Therefore, I just wish to share my experience here and perhaps I can get some advice from you and other friends here.  Any advice will be tremendously and enormously appreciated.
    Kevin Chen @ Taiwan

  • Blue screen on T60

    Hello, hopefully someone can help with a problem I'm having with my T60 thats running Windows XP. I get this blue screen with an error message and I don't know how to fix it.. [IMG]http://i217.photobucket.com/albums/cc287/gabriel0398/0913081246a.jpg[/IMG]
    Does anyone have any ideas? Thanks!

    Welcome to the forum!
    Try pressing F8 while booting and getting into the Safe Mode. From there, choose "last known good configuration" and try to get into Windows.
    Good luck and keep us posted. 
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • Rescue & Recovery Backup Failing on T60

    Hi all -- I'd appreciate any help on the following problem:
    I've been performing regular backups of my T60 to an external HDD via USB for about a year now. I've been using Rescue & Recovery version 3.10.0022.00. Everything's been fine until a couple of weeks ago when after about 20 minutes into the backup, a message popped up that said "Backup did not complete sucessfully."
    The R&R help files are worthless in terms of any sort of troubleshooting information.
    I have 99 GB of space left on the external drive (at least according to R&R), and the HDD that I'm backing up has signficantly less data than 99 GB so I don't think space is a problem. (Curiously, before I ran the first backup that failed, R&R said I had about 110 or 120 GB free, and only after failing the first time and subsequent times did it say I only had 99 GB free).
    I've read of people solving some of their R&R problems by reinstalling, but I'm afraid that the newly installed software won't recognize the backups already taken, and I'll be forced to delete them. I don't want to do this for several reasons.
    Can anyone help?
    Many thanks.

    Hi, eacuni.
    I have no solution to this but am sharing your experience.
    I am running Windows XP on a T60 FDG1951. Ever since I installed XP Service Pack 3 Rescue and Recovery has not been working properly while before that time I never had problems creating backups. Since installing SP3, Rescue and Recovery aborts backing up 100% of the time, showi ng an error message that simply states either that creating the backup was unsuccessful or - even more simply - that it was aborted. No explanation offered.
    Uninstalling Rescue and Recovery and newly installing the most recent version (4.21.0016.00), as the IBM/lenovo helpdesk suggested, didn't help any, either. Nor can it be a problem of a lack of space on my hard drive: I'm creating (trying to create, that is) my backups on an external USB drive with a lush 220 GB free.
    So can anyone of you out there please help poor eacuni and me?
    Thanks!
    Thomas

  • IPOD causes "Blue Screen of Death" with physical memory dump

    Plugged in the IPOD into USB port on computer. It shows "found USB device" and then 5-10 seconds later I get the blue screen of death and a notification that there is a driver error and a physical memory dump as occurred.
    Spent two hours with Apple people and Dell people this morning and nothing. I have updated drivers, flashed my bios, uninstalled and then reinstalled the latest version of Itunes.
    Any help would be greatly appreciated.

    what numerical and text codes are you getting with it? (ie 0x[zeros/letters/numbers] CAPSANDUNDERSCORES)
    if the blue screen mentions a specific file, let us know what that is called too. (exact spelling, please.)
    here's a reference on the sorts of things i'm asking about:
    Troubleshooting Windows Stop Messages
    if you're just seeing a flash of a blue screen, we can use this technique to make hidden blue screens appear for us:
    1) Open your system control panel (Start->Control Panels->System).
    2) Select the "Advanced" tab.
    3) Click the "Startup and Recover" section's "Settings" button
    4) Verify that under "System Failure" the "Automatically restart" checkbox is not checked.

  • Blue screen of death with windows seven

    Ok to begin, I understand that Im using a release candidate operating system but I would appreciate any help.
    When I'm watching a slow I get a blue screen of death. With the fallowing error details:
    Problem signature:
      Problem Event Name: BlueScreen
      OS Version: 6.1.7100.2.0.0.256.1
      Locale ID: 1033
    Additional information about the problem:
      BCCode: 124
      BCP1: 00000000
      BCP2: 8556301C
      BCP3: B6602000
      BCP4: 05000135
      OS Version: 6_1_7100
      Service Pack: 0_0
    I did not have this trouble when I was using windows Vista.
    My pc specs are:
    9600 Phenom BE
    9600 Nvidia GT
    Gigabyte motherboard
    Please let me know if you can help.

    princezuda wrote:
    I read the info you wrote and it said version 6.1.7400 if it is windows 7 shouldn't it be version 7?
    Windows 7 really is version 6.1 (Vista was 6.0).
    Same as Windows XP was version 5.1 (Windows 2000 was 5.0).

  • Blue screen of death with HDD Hardware Test error on iMac HELP!!

    My iMac is not starting up.  It just get the blue screen of death during startup.  It is a 2.66 mghz duo with 2gb 800 ram.  I was able to get the Hardware test to run and got an error of 4M0T/2/40000004: HDD-1560.  I am assuming it is an error with the internal hard drive since I have nothing else hooked up to the mac other than the keyboard and mouse right now.  Does this code mean my hard drive is completely shot?  Any help would be appreciated.

    4M0T/2/40000004: HDD-1560.  
    Either failing or failed   
    You can have Apple replace the drive at a nearby Apple store or an Apple certified repair shop.
    Apple - Support - Check Your Service and Support Coverage

  • Blue Screen of Death with v.8 upgrade.  Please help!!!

    I tried upgrading to itunes v.8, but got blue screen of death. I've tried several times, with the same result. I tried suggestion on here...I went to itunes.exe and changed compatability to XP, but when I click it, it says there is a problem that needs to be repaired in Programs & Features...when I go to Programs & Features, itunes isn't even listed. Please help, we have 3 ipod devices that we can't update now.

    UPDATE: I have found and installed v.7.7...seemed to install OK. Wouldn't run though. Went into Programs & Features and did repair...said it was successful, but still won't run. I am SO stuck!

Maybe you are looking for

  • Photos published to iWeb '08 from iPhoto as a gallery not showing up

    Last night, from my home computer, after installing iLife 08, I made 2 new webpages using the new photo gallery feature from iPhoto. It seemed too good to be true. It published pretty quick considering that there were 20+ 2.3mb photos. it seemed to w

  • BPM error when opening a business rule task

    I am using a created installation of BPM 12c from the ( summer camp ). I am in the BPM composer and I now get the following error whenever I do a right click on a bussiness rule task and then select Open Business Rule "A connection to the server has

  • OVM 3.0.1 - directory structure & adding resources

    Afternoon everyone, I've got OVM 3.0.1 up and running, so far so good. I had a question about the repository directory structure. If this has been addressed already, my apologies. In OVM 2.x, it was possible to copy over a variety of data (.iso's, .i

  • Error Referencing XML Source

    Using NetBeans' Build > Generate Javadoc for Project ... init: Warning: Leaving out empty argument '-windowtitle' Generating Javadoc Javadoc execution C:\Program Files\netbeans-5.5.1\projects\Jesdisciple\nbproject\build-impl.xml:392: Javadoc returned

  • How many times do I need to restart my iPhone or iPad so the iMessage of iOS7 is like iOS6?

    iMessage isn't working! I hate to restart my device every time that the message keep "sending" iOS7 is the worst of the worst update that apple have ever done.