Rescue & Recovery system lost after system restoring

Hi,
I have a X61 7673-a22 and my RnR environment is now the latest edition.
Yesterday I had a factory state restore and I cannot find my RnR within Vista. I downloaded the installation package from the support site but it cannot be installed as my existing RnR environment is newer than the one I downloaded!
Hmm... as the download site is quite messy, I downloaded the latest one I found, but not necessarily the lastest one provided.
Without the RnR installed in my Vista I cannot make backups of my new system. Any help or information is appreciated, thank you!
Message Edited by zkJoker on 04-24-2009 09:06 PM

S1nfullman wrote:
As a last ditch effort to solve a problem I was having I did a complete wipe and os x leopard reinstall. That part went fine but when I did the restore from time machine it keeps hanging on the last step of transfering information. It gets stuck on less than a minute remaining transfering files to support applications. I tried to restart it and then restore again but it says the disk is too full so I'm guessing files are there but bringing the system up without restoring doesn't let me access my information. I tried the whole process again and the same thing happens.
I'm desperate here. My system is unusable and I can't access my files. Any ideas on how I can get past the final hang or what might be wrong?
no idea. if you can't make the automated migration from TM work I suggest you do an erase and install and migrate what you need from the TM backup by hand.
see this link on what to restore from your home directory
http://discussions.apple.com/message.jspa?messageID=6185507
you'll also have to reinstall your apps.
I'm running an original MacBook pro.

Similar Messages

Logical System Conversion after system refresh failed

Hello,
Logical System Conversion after system refresh couldn't complete as the printer was locked. This job was run in the background. In SM37, the job log of RBDLSMAP shows as job finished, but it took only 40 seconds. Now I see that the logical system got changed(Converted) in the client settings scc4 but I know that this client being a production client and would run for couple of hours. Here is the job log information.
02/18/2009 16:09:33 Job started                                                                     00           516          S
02/18/2009 16:09:33 Step 001 started (program RBDLSMAP, variant &0000000000000, user ID ABCD)      00           550          S
02/18/2009 16:09:33 Output device PRN1 is locked in the SAP system                                  PO           349          I
02/18/2009 16:10:19 Job finished                                                                    00           517          S
When try to rerun bdls again, it shows that it is already available and it says "The new logical system name is already assigned to the current client".
Any suggestions on this?
Thanks,
Mahesh

Hi ,
Rerun the BDLS again as this took very little time.
When you try to run again it popsup message saying it already exists just delete that and again put the Logical system name and run it will run that time.
May be while scheduling the job you gave for spool I am not sure why is it looking for Printer which is locked.
Thanks.

Logical System Name after System Copy

Hello,
I have three questions about the logical system name after system copy.
Q1) When I change SID D22 to S11 during system copy,
do I have to change the logical system name of all clients in the target system? The target system is used for test, and the landscape has S11 and Virtial system. The target system S11 does not communicate with the source system D22.
Q2) If the answer for Q1 is YES, is it correct that the following procedure for changing logical system name?
1.Tr-CD:BD54
Add new logical system name for all clients in the target system.
2.Tr-CD:SCC4
As for all clients, select new logical system name with F4 help.
Q3) If the answer for Q1 is YES, do I have to add new RFC connection entries with SM59 for all clients in the target system?
I refer to the guide "Homogeneous and Heterogeneous
System Copy for SAP Systems Based
on SAP Web Application Server
ABAP 6.40 SR1".
thanks,
Keishi

Hi Keishi,
As a good and ideal practice the answer to your first question Q1 is yes. Infact I would say that in case you are using ALE then it is must
For Q2 there has to be an additional step which is most important one. Running BDLS transaction which would allow you to change logical systems in relevant tables from the one of source system to target system.
For Q3 the answer is agaain yes and you can have two approaches>
1. manually recreate all the RFC destinations after sys. copy.
2. Export all the RFC destination data relevant tables before system copy and then reimport them after sys. copy.
Regards.
Ruchit.

Myself Source system problem after System Copy

Hi All,
We recently did a system copy (Production -> Dev). After the logical system rename is done, the myself source system is showing up as a External SAP system, in source system tree under SAP instead of BI. I'm not able to restore/activate it. Any inputs on this problem is appreciated.
Thanks & Regards,
Sree

Problem was with inconsistency in the RSBASIDOC table. Solved by deleting invalid entry and running BDLS again for this specific table.

Change logical system names after system copy

Hi!
We successfully installed SAP ECC 6.0 system as system copy.
All the logical system names of old system have been copied to new system.
Question
What is the approach to change the logical system names for new SAP system?
a) just via tcode SCC4
b) via BDLS
c) other tcodes, reports
Thank you very much!
regards
Jürgen

Hi,
Go though the system copy guide.
http://service.sap.com/instguides
After system copy,
If you need to change logical system names in the system that results from the copy, change the logical system names as described in SAP Notes 103228 and 544509.
https://service.sap.com/sap/support/notes/103228
https://service.sap.com/sap/support/notes/544509
Before running BDLS to change the logical system name, you have to define the correct logical system name in the new copied system. in tcode BD54.
- while running BDLS, execute in background.
Regards,
Debasis.

Logical system names after system copy

Hi!
I installed a new SAP system via System Copy (SAPINST) approach.
As a consequence the old logical system names have been copied.
Question:
What is the appropriate approach (tcode, report) to change the logical system names of each clients of SAP system?
Thank you very much!
regards
Jürgen

Logical System Names
When data is distributed between different systems, each system within a network has to be clearly identifiable. The u201Clogical systemu201D deals with this issue.
A logical system is an application system in which the applications work together on a common data basis. In SAP terms, the logical system is a client.
Since the logical system name is used to identify a system uniquely within the network, two systems cannot have the same name if they are connected to each other as BW systems or as source systems, or if there are plans to connect them in any way.
Although SAP does not recommend that you connect test systems to production systems, a test system can have the same name as a production system. This makes copying production systems to test systems a lot simpler.
You are only allowed to change the logical system name of a system if the system is not connected to any other systems, because changing the logical system name would render all the connections to other systems useless.
In BW, you make the settings for the logical system names in the BW Customizing Implementation Guide under Business Information Warehouse ® Connections to other Systems ® General Connection Settings. In the source system, you make the settings for the logical system in the Implementation Guide under Cross Application Components ® Distribution (ALE) ® Basic Settings.
Note SR047 lists names that cannot be given to BW systems, because they are reserved for internal use.
Logical system names must contain capital letters and numbers only. SAP recommends the following naming convention for logical system names: .

Restore Photoshop Elements 2 updates lost after System Recovery

I have a copy of Photoshop Elements 2 that came over on the Mayflower in my computer... Last week I had to do a system recovery (restoring to factory settings). I was able to load in the disc without trouble, but the updates to the original software are no longer available. How can I restore the updates I've used and enjoyed over the past what...7 years? Is there a "Key" I can buy, a secret handshake...or maybe a guy who knows somebody who knows a guy?
The program was running in XP.... Stop laughing.

Updates are here
http://www.adobe.com/support/downloads/product.jsp?product=40&platform=Windows
But there seems to be only a minor one for PSE2.

Recovery of lost non-system datafile

Hello All,
I have simulated a test environment where I have remove one of the non-sys datafile. For this first I have took the full database backup including archivelog and then remove the datafile from OS level. After that I manually created that datafile in mount state. I put the datafile in offline mode.
When I'm trying to recover the datafile, Oracle shows me error.
Please figure me out, where I was wrong.
Below are steps which I had did.
SQL> create tablespace TTS datafile '/u01/app/oracle/oradata/test/test.dbf' size 10M;
RMAN> backup database plus archivelog;
host $ rm /u01/app/oracle/oradata/test/test.dbf
sql>startup mount
sqll> alter database create datafile '/u01/app/oracle/oradata/test/test.dbf';
sql> alter database datafile '/u01/app/oracle/oradata/test/test.dbf' offline;
sql> recover datafile '/u01/app/oracle/oradata/test/test.dbf';
ORA-00279: change 1080487 generated at 11/06/2012 11:51:50 needed for thread 1
ORA-00289: suggestion :
/u01/app/oracle/fast_recovery_area/TEST/archivelog/2012_11_06/o1_mf_1_13_%u_.arc
ORA-00280: change 1080487 for thread 1 is in sequence #13
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
AUTO
ORA-00308: cannot open archived log
*'/u01/app/oracle/fast_recovery_area/TEST/archivelog/2012_11_06/o1_mf_1_13_%u_.arc'*
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Thanks,
rohit gupta
http://dbarohit.blogspot.in/

Hello John/Azar,
Thanks!
I can restore/recover the datafile from database full backup.
But in my test case, I want to recover the datafile by first creating it manually(that what I have showed).. and then trying to recover it.
I'm doing this because I have read about this steps.
John,
I've already tried to recover that datafile with RMAN, but no luck.
Below are the error message.
RMAN> recover datafile 6;
Starting recover at 06-NOV-12
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=39 device type=DISK
allocated channel: ORA_DISK_2
channel ORA_DISK_2: SID=38 device type=DISK
allocated channel: ORA_DISK_3
channel ORA_DISK_3: SID=40 device type=DISK
starting media recovery
archived log for thread 1 with sequence 17 is already on disk as file /u01/app/oracle/fast_recovery_area/TEST/archivelog/2012_11_06/o1_mf_1_17_89kdrhjx_.arc
archived log for thread 1 with sequence 18 is already on disk as file /u01/app/oracle/fast_recovery_area/TEST/archivelog/2012_11_06/o1_mf_1_18_89kphznq_.arc
unable to find archived log
archived log thread=1 sequence=13
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 11/06/2012 15:07:53
RMAN-06054: media recovery requesting unknown archived log for thread 1 with sequence 13 and starting SCN of 1080487
regards,
rohit gupta
http://dbarohit.blogspot.in/

Network savings are lost after system restart

I am new to Unix. I have an Ultra1 170E with Solaris 7. I configured the network with ifconfig hme0 plumb; ifconfig hme0 131.107.x.xxx netmask 255.255.255.0 broadcast 131.107.x.255. However, each time I restart the system it only retains 127.0.0.1. Thanks in advance for your help.

Check the following files:
/etc/hostname.hme0 and /etc/hosts file on your system.
The /etc/hosts file should have the ip address and hostname.
The /etc/hostname.hme0 file should have the ip address of this
machine.
After ensuring the above, reboot the system and it should
show up correctly.
Thanks
-Manish

Operating system problem after system recovery

i have PURCHASED HP-ENVY-M6-1125DX (IN-USA) IT CAME WITH - WINDOWS8 OS .(BOUGHT IN BEST BYE)
RECENTLY I UPGRADED TO WINDOWS8.1 PRO PREVIEW. SINCE THIS VERSION OF OS WAS ASKING THE ACTIVATION KEY,
I HAVE RECOVERED MY LAPTOP TO FACTORY SETTINGS BY USING RECOVERY PARTITION PRESENT IN MY HARDDISK.
BUT NOW THE OS IS WINDOES 8 BUILD9200, AND THIS OS IS ALSO ASKING FOR ACTIVATION KEY.
PLEASE HELP US IN SOLVING THIS PROBLEM.

Hello Mahantesh-uppin,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you are having issues reactivating your Windows 8 Product Key after a factory recovery. I would recommend that you review and follow the instructions in the HP Support document: Windows 8 Product Activation. This document will walk you through reactivating your Windows 8.
I hope I have answered your question to your satisfaction. Thank you for posting this issue on the HP Forums. Have a great weekend!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Solaris 11 Express - nsswitch.conf settings lost after system reboot

I have made the follow changes to my /etc/nsswitch.conf file below. everything work good until i reboot the system, i look in the nsswitch.conf file and see that the setting are back to default. What am i doing wrong?
Changes
passwd: files winbind
group: files winbind
Default
passwd: files
group: files

Hi,
please use the search function.
Have a look at the 2nd last post:
Re: resolv.conf - blank every new start of machine or waking up from sleep
Bye

Source System Problem after system refresh in RSA1 trx

Hi,
We have R/3 4.7 Test source system created in our SCM 2007 Test System. The source system check was OK.
The R3 Test system was refreshed with Production data few days back and now my source system is not working. When i perform Source System check it says:
BI unknown in source system
BI IDoc type ZSSB006 is not the same as source system IDoc type
I performed following steps in R3 Test system after its system refresh:
1. Created logcal system and created RFC.
2. Created port in trx we21.
3. Created partner profile in trx we20.
4. For the outbound parameter RSSEND, I had to create idoc type that should be same as in my SCM system i.e. ZSSB006.
5. Created idoc type using trx we30 as a copy of RSSEND and added entry in table EDIMSG. Now, i could also create outbound parameter RSSEND with idoc type ZSSB006.
After performing the above steps i also replicated the datasources for the R3 Test source system, but its still showing above error.
I also checked the RSBASIDOC table in SCM test system. It has correct entry for my source system. But there is no such entry in RSBASIDOC table in the R3 test system.
Someone pls help me.
Regards,
Chintan

Hi
Need to restore the All Dalaload connection settings after refresh the system which either R/3 or SCM.
RSA1 -> select the Source system -> Right click -> Restore , It'll ask the connecon paramters like RFC , method of activations. Then check the connection test of the Source system .
Check the the note for further info...
Note 886102 - System Landscape Copy for SAP BW and NW BI
Hope halp you...
Regards,
Sureshram

Incorrect Source System name after System Copy

Hello Friends,
When we copied Source system from Production to our Qulaity system, the DTP s are still displaying Production Source system.
We are in BI7.0 SP13 . I have run TC BDLS to convert Old Source system to new Source system.
But still displaying Old source system .
Please help me with this Issue .
Any advice appreciated .
Thanks

Hi,
Take a look at OSS notes below.
o 184447 Building a BW-system landscape
o 121163 BDLS: Converting logical system names
o 369758 BDLS: New functions and better performance
o 524554 Storing destinations in the BW environment
o 325470 Activities after client copy in BW source systems
o 538052 Maintenance of Myself destination in BW
o 305527 Details for correct BW Source System Connection
o 325525 Copying and renaming systems in a BW environment
o 184971 Notes on BW source system connections
o 184754 Procedure after BW database copy
o 305527 Details for correct BW Source System Connection
o 547314 FAQ: System Copy procedure
o 140276 Error in source system assignment
Regards.

Source System Problem after System Refresh

Hi,
We have R/3 4.7 Test source system created in our SCM 2007 Test System. The source system check was OK.
The R3 Test system was refreshed with Production data few days back and now my source system is not working. When i perform Source System check it says:
BI unknown in source system
BI IDoc type ZSSB006 is not the same as source system IDoc type
I performed following steps in R3 Test system after its system refresh:
1. Created logcal system and created RFC.
2. Created port in trx we21.
3. Created partner profile in trx we20.
4. For the outbound parameter RSSEND, I had to create idoc type that should be same as in my SCM system i.e. ZSSB006.
5. Created idoc type using trx we30 as a copy of RSSEND and added entry in table EDIMSG. Now, i could also create outbound parameter RSSEND with idoc type ZSSB006.
After performing the above steps i also replicated the datasources for the R3 Test source system, but its still showing above error.
I also checked the RSBASIDOC table in SCM test system. It has correct entry for my source system. But there is no such entry in RSBASIDOC table in the R3 test system.
Someone pls help me.
Regards,
Chintan

Hi Chintan,
Can you please check IDOC in your Target system. It should be the same type. Better you do the Partner profile steps.
Also please check have correctly created the idoc in Inbound or Outbound.
Consider the case like if its exist in BW as Out bound then its connected to Inbound IDOC of R/3 and vice a versa.
Please elaborate your refresh activites. Normally IDOC setting never get changed in you refresh activites.
Just check your BW system patch level and search for Notes.
Regards,
Mahesh

New photos lost after backup restore

My son deleted some old photos from my iphone 4. I did a 'restore from back up' and here they are. However, I lost the latest photos. I haven't synced the phone after the back up. IS here any chance to find those pictures that disappeared?
Thanks

That is so sad. I lost pictures of my holidays with my son. Hundreds of them. Thank you for reply.
There is nothing that can be done?

Rescue & Recovery system lost after system restoring

Similar Messages

Maybe you are looking for