Rescue & Recovery Unable to backup ....

Hello,
I have used Rescue & Recovery for many years and love it. It has save me multiple times.
I recently installed Google Desktop. There are about a dozen Google Desktop files that R&R says it is unable to backup. I have to manually say "skip" to get the backup to complete successfully. This is a pain.
Q1) Is their a way to add these files to a R&R "exclude" list so R&R does not attempt to back them up? I do not need them in my R&R backup, as they can easily be recreated.
Q2) Or alternately, is their an adjustment I can make to Google Desktop so that R&R will backup these Google Desktop files?
Thank you for your assistance.

you can exclude files in R&R go to advance mode and at the top of that click on advance then exclude files
Thinkpad R61 7733-1GU
Thinkpad X61T 7762-54U
Thinkpad X60T 6363-4GU
Did a member help you today? Thank them with a Kudo!
If a post answers your question, please mark it as an "Accepted Solution"!
Regards,
GMAC

Similar Messages

Rescue & Recovery lists no backups on Iomega USB eGO disk

Hi,
I have been using an Iomega eGO external USB drive for backups.
I have been able to list and remove backups (when required) when in Windows 7 and running Rescue & Recovery, but I am unable to get a list of backups when booting from a Recovery DVD into Rescue & Recovery.
Basically I am replacing the unencrypted hard drive with an SSD that supports encryption.
The aim was to use a full backup made immediately prior to removing the HDD to restore the full system.
When booting from the recovery DVD, the Rescue & Recovery utility doesn't list any backups, even when the tick box for listing backups for other systems is checked.
It makes no difference whether selecting ALL locations or External USB Drive.
Any ideas?
Backups aren't much good if you can't retrieve them.
If my old disk had failed then I'd be in a worse state than this. I can't say that I'm impressed.
Solved!
Go to Solution.

Hello and welcome,
Has R&R been updated since you made your bootable DVD? It's possible there's a version mismatch between your backups and your R&R DVD.
You might try burning a new rescue CD - or whatever it's called on your machine, "bootable media" maybe. That may be able to find your backups.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Can you install Windows 7, then revert to a backup image of Vista with Rescue & Recovery?

I have a copy of 7 I want to put on my T61. I've partitioned the OS into one partion, and the files into another.
I've made backup copies of the OS with Rescue & Recovery already, so can I install Windows 7 over Vista, then if I find I don't want to stick with it, recover back to Vista?
T61 15.4" T9300 (2.5GHz 6MB L2) Windows 7 Professional x64 4GB Memory, NVidia Quadro NVS 140M

When you get to BOOTCAMP, that has to be changed from FAT to NTFS but you have to click Advanced Option.... button in order to change to NTFS.
The GPT error message can happen if you have more than one internal hard drive (say SSD and TB model).
If you didn't use Assistant, and some have managed, undo the partition.
Paragon CampTune $19 can also assist with installing Windows, creating the partition - but may not work with Lion, though you aren't there yet.

Rescue & Recovery resets backup time

I'm on a Windows 7 64 bit x230 laptop. Rescue & Recovery 4.50 keeps resetting my backup time to noon, I keep setting it to middle of the night when it would be convenient to do a backup. Why is it doing this? I have tried resetting the schedule in both advanced rescue & recovery and the basic page. Yes, I am hitting save or apply.

The windows task scheduler has the launch entry for RNR scheduled backups.
Go to Control Panel, Admin tools, task scheduler. Double click the task scheduler library, then you will see a list of folders. Double click the TVT folder. You will see an entry called LaunchRnR. Right click this entry, and do Properties.
Please post the current Trigger contents. Does it say weekly or such, at NOON as you describe?
Look in C:\SWshare\rr.log for the following entries:
Tue Jun 12 13:56:42 2012 RescueRecovery: C:\Program Files (x86)\Common Files\Lenovo\Scheduler\tvtsetsched.exe
Tue Jun 12 13:56:42 2012 RescueRecovery: update task="LaunchRnR" trigger=RnRTrigger triggertype=weekly time=2012-06-01T07:00:42 day=0 action=RnRAction actiontype=exe argument="BACKUP location=L name="Scheduled" scheduled"
Tue Jun 12 13:56:42 2012 RescueRecovery: Running: C:\Program Files (x86)\Common Files\Lenovo\Scheduler\tvtsetsched.exe update task="LaunchRnR" trigger=RnRTrigger triggertype=weekly time=2012-06-01T07:00:42 day=0 action=RnRAction actiontype=exe argument="BACKUP location=L name="Scheduled" scheduled"
Tue Jun 12 13:58:52 2012 RescueRecovery: In GetBackupFolderName, UUID is CC5F1FA34DEF30F6-B487057ED9063ADC!
Tue Jun 12 13:58:52 2012 RescueRecovery: C:\Program Files (x86)\Common Files\Lenovo\Scheduler\tvtschedinterface.dll
Tue Jun 12 13:58:52 2012 RescueRecovery: g_pTVTSchedulerInterface is NULL!
Tue Jun 12 13:58:52 2012 RescueRecovery: Get back from GetTaskNextRunTime and return value is 0, next run time is 2012-6-17 7:0:42
After you set your desired backup schedule, check your log for the above messages. ie, RC=0. Then check task scheduler for matching launch schedule. Please post the portion of RR.log containing the above messages.

Rescue & Recovery Backup Failing on T60

Hi all -- I'd appreciate any help on the following problem:
I've been performing regular backups of my T60 to an external HDD via USB for about a year now. I've been using Rescue & Recovery version 3.10.0022.00. Everything's been fine until a couple of weeks ago when after about 20 minutes into the backup, a message popped up that said "Backup did not complete sucessfully."
The R&R help files are worthless in terms of any sort of troubleshooting information.
I have 99 GB of space left on the external drive (at least according to R&R), and the HDD that I'm backing up has signficantly less data than 99 GB so I don't think space is a problem. (Curiously, before I ran the first backup that failed, R&R said I had about 110 or 120 GB free, and only after failing the first time and subsequent times did it say I only had 99 GB free).
I've read of people solving some of their R&R problems by reinstalling, but I'm afraid that the newly installed software won't recognize the backups already taken, and I'll be forced to delete them. I don't want to do this for several reasons.
Can anyone help?
Many thanks.

Hi, eacuni.
I have no solution to this but am sharing your experience.
I am running Windows XP on a T60 FDG1951. Ever since I installed XP Service Pack 3 Rescue and Recovery has not been working properly while before that time I never had problems creating backups. Since installing SP3, Rescue and Recovery aborts backing up 100% of the time, showi ng an error message that simply states either that creating the backup was unsuccessful or - even more simply - that it was aborted. No explanation offered.
Uninstalling Rescue and Recovery and newly installing the most recent version (4.21.0016.00), as the IBM/lenovo helpdesk suggested, didn't help any, either. Nor can it be a problem of a lack of space on my hard drive: I'm creating (trying to create, that is) my backups on an external USB drive with a lush 220 GB free.
So can anyone of you out there please help poor eacuni and me?
Thanks!
Thomas

Rescue & Recovery can't find by backups - EXCEPT in the restore function. Help

I recently optimized   files, including placement
on disk - machine now flies. I wanted to start from scratch with R&R). So,
deleted all backups on Local and USB.
I launched a Base Backup - initiated manually, shut down,
rebooted, came back up could not view backups - Message 'NO BACKUPS
FOUND' hen trying from 'view all back-ups', or 'delete backups' from Advanced
menu. However I can find them using RESTORE FROM BACKUP.
Repeated starting with a new backup, same results exactly, except
now I have two BASE backups. I even booted to the TV R&R
environment maybe find things there. No luck - no ability to initiate a backup from Boot TV
environment, but could restore from the two backups.
I see no other choice other than uninstall 3.01? Do you? However, the newest
version out there is 4.22.. Any reason why I shouldn't upgrade to the
newest release? I read all the warning, installation notes, bugs, etc., none seem to apply to me.
If anyone has any ideas, I would appreciate it, or if you know any
reason why 4.22 is not a good option...?
Thanks in advance
Rescue & Recovery version 3.01 T60 machine type = 2623 - Model -
D7U
Solved!
Go to Solution.

After deciding to recover a large amount of disk space, and start over with a new BASE - so deleted off all backups (I have a set on DVD's). Used the Delete Backups under the Advanced tab. Version 3.01.0037.
Ran a new base backup (successful), but when trying to look at it using every available function in R&R - it could not find any backup " ". Kept on messing around until low and behold, when attempting to do a restore, it finds the backups and lets me restore from it. I could have lived with it but every backup it took (I tried two more) were each bases meaning big consumer of harddrive space.
Mistake one - called Lenovo (3 year contract), they suggested upgrade to most current version of R&R 4.21 or 4.22. Walked me through it (no worries) and got new one installed. PS: Version 4 has some new very slick features. Ran backup (I monitored using Task Manager - processes) - ran for a couple of hours never consuming more than one % of CPU. Cancel button inoperative - eventually had to shut down machine. When booted up again, R&R Processes continue to run and all attempts to start R&R unsuccessful.
Back to Lenovo - eventually tried with 3 other release versions (all R4), same results. They suggest reimage platform and start over. Note: I had no problems whatsoever until trying to recover space from R&R by deleting backups.
Gave up on Lenovo and reinstalled V3.01.0042 (most recent R3 version). Everything appears to run fine. Doing backups, can see them, tried a couple of restores, everything worked perfectly.
New variable. Was convinced that XP sp/3 had been out there long enough, over a year,so decided to install. First thing, take a new backup even though the base was less than 48 hours old.
It became evident very evident that SP/3 had caused a lot of instability to my machine. BSOD's all over the place, so decided to go back. My first approach, go back by restoring to my last backup using R&R. (at least the Window System since everything else had not changed). I started in Windws to select which backup and what I wanted to do.    R&R then shut down Windows and began firing up the R&R boot space in order to do the Windows restore.
Here's the reason I ended up at this NTLDR post, was after stopping temporarily with the delete of the MBR, I thought I might reinstall version 3.02.0042 and see if that had any impact on the MBR. So, I installed it, ran a delta backup which ran quick since hadn't changed much, then shut down and attempted to boot into the R&R Recovery Space. Low and Behold, I get the NTLDR is Compressed - message . Which took me here.
I followed your advice and downloaded the files and burned them to a diskette, ran the diskette, then tried to boot into the recovery space.
To my surprise, Version 4 of R&R fired up (where did that come from when I had uninstalled all version 4's using the Add/Remove program function). And of course, once it was all loaded it gave me the message that it couldn't find the backup Record where it expected it to be (it was on an external USB drive).
So now, I need to figure out how to get rid of Version 4 on the MBR so I can load it again with the right version. Lenovo suggested to be that could be accomplished by doing the following:
Uninstall R&R v 3.01 - using add/remove programs
Boot into Bios - Disable Pre-Desktop - save and exit.
Uninstall R&R v 3.01 - using add/remove programs
Boot into Bios - Disable Pre-Desktop - save and exit.
Reboot into Windows
Right click on My Computer, select Manage - get to Disk Manager - select the Service partition of the C hard drive (the MBR) and Delete the Service partition.
Install the new 3.01version of R&R (and it will also rebuild the with the proper version - the only one it now knows about.)
I got as far as the Delete the Service Partition, but the computer would not let me delete it. In fact, it would allow me to delete the primary NTFS partition, but the delete was grayed out on the Fat32 Service Partition.
So, my next step is to install Norton Partition Magic and use that to remove the Fat32 Service Partition. But before I do so I need to know that what I am doing has a good potential to solve the problems I am having, and not just compounding the problems to the point where I will have no choice but to reload with a factory image and manually bring it forward (not fun)
One question i had for you, on the NTLDR diskette, you didn't have anything on it that would load R&R v4 into the MBR did you? I didn't think so.
do you think the solution suggested will work? And any potential pitfalls I should be aware of,or if you have a better idea, I am all ears.
Thanks so much in advance for your assistance.
Regards
Fred J
Message Edited by andyP on 11-15-2008 09:09 PM

Unable to install Rescue & Recovery on X201 Think Pad

I have just bought a pre-owned Think Pad X201-3680-FZ2 laptop with Windows 7 professional, and for my own peace of mind wanted to restore it to factory settings before I start using it.
There are no recovery disks so I have downloaded the Rescue & Recovery 4.52 Setup but when I run the programme it gets to a certain point and then I receive the error message Error 25014. There was an error installing the Rescue and Recovery boot manager. Return code: 6
I have searched for a solution to this problem online, and see that I am not alone, but the responses I find either do not seem to apply to me as the other programmes mentioned are not installed, or I do not understand them.
I am not a computer expert, just a domestic / home office user, so need a solution in very easy to understand terms. The Think Pad I have came with no instruction manuals, and as far as I can see, all the programmes installed relate to the operation of the Think Pad itself. There does not seem to be Rescue & Recovery already installed on the ThinkPad.
Does anyone have a solution to this which they could explain to me in simple terms, please?

What are the partitions labels?
According to the information you've provided:
1. you have fresh installed OS in OEM reduction, it's activated from the BIOS, it's not a Lenovo preloaded image
2. two recovery partitions (recovery workspace and partition for the stored image) were removed during the new OS installation.
Also, needed bootloader was removed so you are facing error regarding R&R installation. Perhaps OS was installed w/o complete drive cleaning.
Are there any archives on the drive? Try to find files with .wim extension (like sdrivebackup.wim and cdrivebackup.wim). It's the only chance previous owner saved preloaded image.
Nevertheless, don't worry, no problem to perform fresh installation
x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
Do it well, worse becomes itself
Русскоязычное Сообщество English Community Deutsche Community Comunidad en Español

Unable to Access Rescue & Recovery for Factory Restore

Hi!
Problem: Can't access {Rescue & Recovery (F11?)} on startup.
Keep in mind that my "Thinkvantage Toolbox" freezes everytime I try to launch it while I'm logged in. I can access the BIOS but when I try to either press F11 to get to Rescue and Recovery I get an error asking me if I wanna do a windows resume or a stuck key, same goes for the ThinkVantage button on startup that is.
Is it all linked to the fact that when I'm logged in and try to open ThinkVantage Toolbox it freezes? I tried to update everything from Lenovo and did nothing changed.
Help ! Thanks!!

Hi,
I assume your problem is that when you press F11 at system start up, you can entering RnR PDA as expected?
If this is the issue, I need your help to provide below info for further analyze.Thanks.
1.
under windows cmd line with admin privilege:
bcdedit /enum all > c:\bcd.txt
=> this will generate a file named bcd.txt under C:\, please collect it and send to me.
2. Get me the disk partition layout info by below way:
    steps:
    a. run diskpart.exe with admin privilege
     b. type list vol and enter
     c. type sel disk 0 and enter ( if there are more than one hard disks please choose the disk number of which C partition lies)
     d. type list par and enter
     e. get me a picture of all of the output..
3. find bmgr32.exe from " C:\Program Files (x86)\Common Files\Lenovo\BMGR" or 32bit system from " C:\Program Files\Common Files\Lenovo\BMGR".
     run this command : bmgr32.exe /info > c:\bmgr32.txt and get me the "C:\bmgr32.txt"

Restoration of Lenovo T500 to new hard drive using Rescue & Recovery

I bought a new hard drive and I have been having a frustrating time trying to migrate the image of my hard disk to the new drive. When I bought my T500, it came with Windows Vista Business 64, but I have since downgraded it to Windows XP Pro.
Up to now, I was faithfully using Norton Ghost 14 to back up my drive to my USB Western Digital MyBook Mirror Edition 1TB drive. However, I get errors when I try to restore the image to my new drive (and I will be posting that issue to Norton's forum).
While I have not completely given up on Norton Ghost, I decided I might be able to restore the image using the Rescue & Recovery software. I downloaded and installed R&R 4.21.0016.00. After I installed it, I backed up my system to the MyBook Mirror Edition.
I then shut down the computer and put in the new hard drive (a Western Digital Scorpio Black WD5000BEKT). I used a disc that I burned from the ThinkVantage Create Recovery Media utility to boot the machine. While the environment loads just fine, it does not detect my USB hard drive. NOTE: I didn't make my USB drive bootable, I only stored the backup files there.
I tried going into the PC Doctor utility and discovered that there is an "unidentified" USB device under the mouse section, which I presume is the MyBook.
I have hunted high and low for an answer to this both on Lenovo and Western Digital's web sites, but I can't seem to come up with a reason why my drive is not visible to R&R, or a way to load the WD drivers into this recovery environment. I found http://forum.lenovo.com/t5/ThinkVantage-Technologies/Rescue-and-Recovery-does-not-recognize-USB-driv..., and I followed the instructions - there is a minus sign next to the USB boot device in the bios. However, saving the bios and rebooting the computer (as the post suggested) does nothing to change that setting.
I have tried upgrading the bios to the latest version, but still no luck detecting the USB drive.
I am thinking about resorting to buring a backup of my entire system to DVDs and then restoring using the DVD drive. However, since my current backup is 60GB, I imagine that will take 15 discs.
Whether that fixes my immediate problem or not (that is, transferring to my new drive), I still don't have an answer for a long term solution in case of hard drive failure. Ghost is not working with my current configuration. And if I use R&R for backup, it will do me no good if I cannot get it to connect to my USB drive to recover. Furthermore, as far as I can tell there is no way to burn an existing restoration point to DVD - meaning I would have absolutely no way to restore if my hard drive failed.
I have been working on this migration for 3 full days already, and since I had my system images backed up I thought that this would be a trivial task. Any suggestions at this point would be welcomed.

I'm experiencing the same problem. I wanted to restore single files from an USB disk. Two larger file (500MB each) went through that process quite fast (3 minutes). A folder with many small files takes forever.
What's strange is that my notebook hard drive is at 100% activity all the time, while the USB disk is hardly read.
Message Edited by gerik on 10-29-2008 02:33 PM

E30 - Rescue & Recovery "Rejuvenate" still at 0% after 20 hours

Dear Sirs,
How long can R&R "Rejuvenate" stay at "System restore in progress... 0%" before I should begin to worry? I started a Rejuvenate on my E30 about 20 hours ago, and for at least 19 of those hours it's been sitting at 0%. (And yes, I'm beginning to worry!)
In terms of details:
1) I purchased this E30 from Lenovo in August 2011. It's a fairly basic machine with two 500GB HDDs in RAID 1; the drive is about 27% full; and I've done regular backups (to a 500 Lenovo USB external hard drive) via Rescue & Recovery without ever encountering any problems.
2) I have never defragmented the disc (at least until this current "Rejuvenate" attempt).
3) Just prior to the Rejuvenate, I (by way of a test) did a full Restore (via Rescue and Recovery) of my machine to a backup I made earlier in the day. This Restore proceeded without at hitch, and took about 90 minutes. The machine worked normally after the Restore, and had correctly reverted to the state it was in when I made the backup -- so everything seemed fine.
4) I then restarted the machine, restarted R&R, and selected the Rejuvenate option. The first Rejuvenate steps seemed to go well: first came a small incremental backup, and then the "Capturing current settings" step proceeded pretty rapidly. The next step (according to the "Rescue and Recovery Progress" window) is "Restoring Files" -- and the machine has stayed on this step for the past 19+ hours.
5) On my screen, there are two windows atop a "Lenovo -- Rescue and Recovery 4 -- ThinkVantage Technologies" background. One window is "Rescue and Recovery Progress", and inside that window is the word "Rejuvenation", and then five steps. The first step is "Capturing current settings", and there's a green check mark next to it. The second step is "Restoring files", and there's a blue arrow pointing to it. Three more steps (e.g., "Apply saved system-wide settings", etc.) sit below, without any markings. The other window is "Progress", on which there's a completely empty horizontal bar graph, below which are the words "System restore in progress... 0%". I've tried Alt-Tab, and no other windows are visible anywhere.
6) The machine is not frozen: I can move the mouse icon freely, and can drag the two progress windows about the screen.
7) The HDD LED on the front panel of the E30 tower emits a brief low-power flash at precise 1-second intervals (question: is the machine polling the disc or the optical drive?). At various times in the day, this LED has briefly but fully brightened in the random, flashing way that it does when the discs are being written to (e.g., about an hour ago it was starting to seem normal, and I was beginning to feel relieved) -- but now it's reverted to its 1-second dim flashing, without any bright bursts at all.
8) The red light on the external USB Drive is mostly continuous bright red, but this light flickers randomly and frequently, as if the external drive is actually doing something. These flickers, however, can happen (and usually do happen) without any corresponding change in the E30's front panel LED's regular 1-second "ticks".
9) Unfortunately, the above info pretty much exhausts all my knowledge about computers, and I have no access to an IT expert (I'm a freelance writer who has to run CAD models on occasion, and this E30 sits in my bedroom "office"). I've searched the Lenovo forums for threads on this "0%" issue, and apart from the Alt-Tab suggestion to look for hidden windows, I haven't understood anything in them (sorry). Also, in hindsight, I wish I had put a backup on something other than the external USB drive -- e.g., presumably if I do something drastic like turn the E30 off, I corrupt both the E30 drive and the external drive backup files, yes?
And, so.....am I in trouble? Have I done something wrong? And if so, is there any way I can get my computer working again? Or is R&R working properly, and the Defragmentation part of the Rejuvenate is just taking a long time (because I've used the E30 for over three years without ever defragmenting or rejuvenating)? Any advice (or even reassurance) would be greatly appreciated!
Thank you very much (and Congratulations on the new P-series Thinkstations -- I saw them when I logged on to compose this query; may you please all have great success with the new machines!).
Yours, - W
P.S. -- in the time it's taken to compose this query, the front panel HDD LED has begun to occasionally flash again (random, intermittent, full power flashes, separated by long periods of 1-second "ticks") -- so things are sort of working, yes? =)

Right -- the "Rejuvenate" process has finally ended, 43.5 hours after I started it. =)
(The user interface is really confusing -- even after I thought things were done, windows would spontaneously pop up and tell me to reboot the computer; it took 4 reboots before a final pop up said "Rejuvenation Successful"....)
Questions for the Experts:
     This was a painful process: among other things, I've been minus my workstation for two solid days, and at no point did I have any idea when and if the computer would begin to work again. Hence....
1) Is "Rejuvenation" worth the trouble? Is this something you'd recommend people use, or should I avoid the option in the future?
2) Should I regularly Defragment my disk? The Rejuvenation program has now set my Defragmenter scheduler to come on every week (previously, the Defragmenter was turned off). Is regular disk defragmentation something you would recommend?
3) How is "Rejuvenation" different from a simple Backup + Defragmentation? Is the Rejuvenation somehow more thorough or more effective? I ask because of how painful the Rejuvenation process was this time around: if it really doesn't do anything the Defragment tool doesn't, then I'd prefer to avoid it in the future.
     Sorry for the naive newbie questions(!) -- I just happen to love my E30 (which I specced out according to recommendations given to me on this forum, three years ago -- thank you for all the help!), and I'd like to maintain it properly. =)
     Thank you in advance for any recommendations!
               - W

Newbie Query regarding creation of Recovery disks and Backups

Hello ppl/Admins,
Some clarification required (my questions might seem dummy ...but i have no choice).
I'm a newbie and just received my first laptop ever Lenovo 3000 N200 0769 (WinXP).
My queries are:
1) If i create a 'Complete Backup' under Lenovo care application will that include the entire hidden partition? Or do i need to use some other software like Norton Ghost to backup the entire image of the hard drive?
2) Is there a way to only backup the hidden partition?
3) I have noticed in other threads users refering to system and recovery disks, what/how are they used/created (i dont see any
create recovery disk option under lenovo care button)? How does a recovery or system disk differ from a backup?
My sole intention is to save/backup the hidden partition so that i could restore the laptop into its factory settings if things go wrong, so if anyone could help....it will be much appreciated.
Thanks!

Hi atomic, if you look under the lenovo program file you will see two different entries that relate to restore / recovery, I'm not at my machine now to directly tell you what is called, other than one is towards the top half and the other nearer the bottom.
The one at the bottom has two options, the first is to create recovery media (I'm presuming this is for if rescue & recovery fails to boot up).
Under this there is then a 2nd option that refers to creating a restore cd, of which it will only let you make s single copy under MS licencing. I'm of the impression that if required and used, it will take a user back to factory restore settings i.e. original factory restore as it arrived. This I'm presuming will image the partition as well.
As for the other recovery option higher up the menu, this is for actuslly creating backups and restoring system and/or files.

Launching Rescue & Recovery from a Command Line

Question - I would like to know how I can launch Rescue & Recovery from a command line.
Issue that is prompting the question - My laptop was sitting in my computer bag overnight. The battery was fully charged. I BELIEVE that it was in suspend mode at the time. When I opened it in the morning, there was a message on the screen saying that a backup had not completed successfully. I then noticed that the battery had run down completely.
My Plan - I would like to launch Rescue & Recovery (as well as the Defrag utility) from Windows Task Scheduler. If I do, then all schedule tasks will be launched and controlled using the same process. Windows Task Scheduler also provides two key scheduling criteria that the IBM Rescue & Recoverry or the IBM Maintenance Manager utilities do not provide -
#1 - Run this task only when the PC is on AC power.
#2 - Run this task ony when the computer is idle (so that it doesn't slow down the PC if I happen to be working on it)
Background Concerns -
- Having a backup job automatically start when the computer is in my computer bag will run down my battery when I least expect it.
- The PC may could also be damaged due to overheating, since the sides of the computer bag block the ventilation holes.
Additional Info
- If I go to the ThinkVantage Productivity Center and select the Quick Link for "Backup Now" this will indeed launch a backup on demand. I assume that selecting this option is calling a specific executable file.
- However, the only two applicable executable files that I see in the C:\Program Files\Lenovo\Rescue and Recovery directory are "mr_gui.exe" and "wizrr.exe". Both of these files launch an interface that requires the user to make a selection. As a result, it doesn't look as if either of these files would work for unattended operation, unless there is some sort of switch that I can put in that will automatically start the backup process.
- I called the support line (only once so far), but that particular rep did not know of any way to launch Rescue & Recovery other than from the standard R&R user interfaces.
Any help is greatly appreciated,
Mathew

The correct way to invoke a JSP is to make a request to the Server.
Normally you would use your browser to do this.
On a unix system, you can use the wget command to invoke a url without using a browser.

T42 rescue & recovery

Hi all,
I've just purchased my first thinkpad - a refurbished T42. It's nice!
I'm preparing to wipe the whole drive and install linux and decided to make a set of rescue & recovery discs. I used the IBM utility, which created the following:
- 1 disc: ibm rescue & recovery with rapid restore
- 6 discs: ibm product recovery
I decided to test it just for fun and was dismayed, upon pressing "restore factory contents", to be greeted by the following:
The IBM Product Recovery function has been removed from this system.
wtf?
The BIOS setting for the recovery partition is "Normal" (as opposed to disabled, or password-protected)
...and when I looked at the partition, it looked like a normal FAT32 partition with about 4 gigs of files.
So... what to do? Should I back up the active windows partition (as opposed to the rescue partition) before deleting windows?
Thanks!
~David.

I think the key thing with backups is not to trust anybody. Backup at least 2 independant ways - Maybe ghost to DVD and factory backup and file copy - thats 3.
I think I struck this problem once. The backup partition has to be on the hard drive and in the right partition - maybe the first primary partition or second primary - I forget.
You are best to ghost that partition separately too.
If you have your XP code you can always build it from scratch by downloading all the drivers. Takes me about a day to build up a system like this though.
T61P WUXGA NVidia Quadro FX 570M Graphics T7800 @ 2.60GHz XP SP2 2gb RAM Advanced Doc Matrox QID LP PCIe
T42P UXGA 2373 KXM Old advanced dock with PCI with Matrox 4 monitor card A31P UXGA - 2 UltraBay Ports!
A21P UXGA PIII 850MHz 770ED 233MHz 760ED 133MHz - my first Thinkpad Compaq LTE Lite - My first laptop

Terrible bug with Rescue & Recovery 4.5

Hello all,
Just a notice to all users, I had a terrible bug with Lenovo Rescue & Recovery. Everything went well, until the restore: I have one SSD for system and one micro sata for data. The system drive had two partitions (created by Lenovo at the origin, a system (C) partition and a Lenovo recovery partition). When I tried to restore a previous version of the system drive that I backuped with Lenovo R&R, it restored the system on C: and restored the recovery partition... on D:, erasing all my data! In addition, the MBR was missing on the system. And cherry on the cake, I could not use the backup a second time when I tried, because R&R did not find the backup again.
I was particularly disappointed because as the backup went so smoothly, I did not do a data backup before restore, my previous backup being three days old, so I lost three days of work.
I had previous bad experience with Windows backup & restore, windows software could not find the restore, but at least it did not erase data.
Thierry

I agree with the TERRIBLE bug comment.
It amounts to:
(1) restore Q partition
(2) C drive.
I will repeat my other posts. I ordered pc, with 320 GB and 160 Gb Hdd. From factory, C went to 320MB. Factory install goes to 1st HDD it finds, in my case 320 GB.
So you have discovered a new, how does it work?
1 HDD (c), 1 sata (for data). It used factory recovery items, and waxed the sata( and made it bootable). Then got smarter, and restored C to HDD, unbootable.
Did someone not test this? Dont expect a new version of RNR. not supported on win 8. Acronis, $$ well spent.
Dumb.
Next time, unplug the loved sata before a FULL HDD restore. (not a c drive restore). Sad. unplug loved!
==
Did not find backup 2nd time around. Discussed in other posts from myself. What is your windows platform RNR backup location set to? If local, change it to USB or where ever you think they are at.

Rescue & Recovery issues trying to transfer files

I have an annoying issue. My lappy woke up this morning with the CI.DLL error and I get the error screen saying that this was deleted and I'm unable boot. Tried booting in safe and still did not work. So I went into rescue & recovery to restore and I wanted to transfer some files I had on my hard drive that were not backed up. I have an external hard drive and I've done this before; transferring files before I do a complete restore. I tried it this morning, selected the files I want transferred and then it pulls up a screen that says 0% complete, files could not be transferred??? Any ideas? Would this be caused by the error above? Thanks.

wmarkw, welcome to the forum,
It is unlikely that someone with a solution will browse by in 37 minutes, this is a peer to peer forum. I have moved your post here as your issue is more R&R than hardware related it will hopefully be seen by more members who use R&R.
As a thought, are you able to remove the hard drive and copy the files you need by attaching it to another system?
Message Edited by andyP on 10-21-2008 06:42 PM
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Rescue & Recovery Unable to backup ....

Similar Messages

Maybe you are looking for