Rescued Old Imac G5

Almost 4 years ago I posted the following discussion:
Mdn2005
        31-Oct-2008 22:56    
The other day my imac was frozen which is highly unusual and since then it has not been right. I can boot into safe mode and i have trawled these discussions and other forums for solutions. I have tried them all and i still cannot resolve the problem.
1-Is the problem hardware or software?
2-Has anyone managed to resolve this issue?
Please help.
Imac G5 revb 2ghz 20inch, Mac OS X (10.4.11)
The outcome was that the logic board had failed and had to be replaced.
The machine sat in the box for the next 3 years and one day I decided to open it up and after doing some reading online narrowed the issue down to blown capacitors on the logic board.
After order replacement capacitors from the US I dismantled the machine, soldered off the blown capacitors, replaced them and I now have a perfectly good running Imac G5.
If anyone would like info, advice or help in undertaking this repair please do not hesitate to contact me.
Mdn

Apologies for the misunderstanding I posted this to assist other users and this was not clear in my post.
The outcome when I resolved the issue was as follows:
The  logic board had failed and had to be replaced which I did not do due to the cost vs benefit factor.
The machine sat in the box for the next 3 years and one day I decided to open it up and after doing some reading online narrowed the issue down to blown capacitors on the logic board.
After ordering replacement capacitors from the US I dismantled the machine, soldered off the blown capacitors, replaced them and I now have a perfectly good running Imac G5.
If anyone would like info, advice or help in undertaking this repair please do not hesitate to contact me.
Mdn

Similar Messages

  • New imac doesn't locate old imac hard drive via usb port

    I have an old iMac from ~2006 that recently stopped reading the harddrive.  I pulled the HD out and connected it to my new imac via USB port but I can't locate it.  The HD spins/powers up so I know the connector is strong enough to supply power.  We connected it to my husband's PC and he can see that there is a harddrive but cannot see any files to read.  He even tried Catacombe to try to read files but it didn't work.  My first issue is how can I locate my HD on the new mac?  But the main issue is how can I pull data/pictures off of the old harddrive and import them to my new computer.  I don't hear any clicking sounds from the harddrive so it seems to be working.  I can't reformat it because I don't want to lose the pictures on it.  I don't need the old harddrive to work/write.  I just need to pull the information off of it.  TIA.

    I was not familiar with catacombae , but now I am .
    You have a problem with either a corrupt file system on the hd or a hardware problem with the hd.  I'd say try mounting in disk utility.  Try reparing filesystem on hd.  Try one of the disk repair utilities.  Some have a free trail that let's you know if they can do anything.  You pay to get the data.  Seek profession help.  Pay $$$.
    How to mount with disk utility.
    Repair the file system.  see repair disk button on lower right.
    here are some more data recovery apps.  I left out a few & am posting my complete list.
    Perhaps Disk Warrior will be of some help:
    http://www.alsoft.com/DiskWarrior/
    "Stellar Phoenix Macintosh - Mac data recovery software, recovers data from damaged, deleted, or corrupted volumes and even from initialized disks."
    They have a trial version, so I guess you can see if your data can be recovered...
    http://www.stellarinfo.com/mac-data-recovery.htm
    "Data Rescue II is the best data recovery software on the market for recovering files from a problem hard drive. Data Rescue II works when other tools fail. Data Rescue II is also completely safe to use since it does not attempt any risky repairs to the drive while its scanning."
    http://www.prosofteng.com/products/data_rescue.php
    FileSalvage is an extremely powerful Macintosh application for exploring and recovering deleted files from a drive or volume.  FileSalvage is designed to restore files that have:
    -- been accidentally deleted.
    -- become unreadable due to media faults.
    -- been stored on a drive before it was re-initialized/formatted.
    http://subrosasoft.com/OSXSoftware/index.php?main_page=product_info&products_id= 1
    "TestDisk is a free data recovery utility. It was primarily designed to help recover lost data storage partitions and/or make non-booting disks bootable again when these symptoms are caused by faulty software, certain types of viruses or human error (such as accidentally erasing a partition table)."
    http://en.wikipedia.org/wiki/TestDisk
    Wondershare Data Recovery for Mac
    "Recover lost photos, video, documents, email and archive files from any Mac-based hard drive or external hard drive, iPod, USB drive, SD card, digital camera, mobile phone, and MP3/MP4 player, due to accidental deleting, formatting, virus infection, improper operation, unexpected power failure, and other unknown reasons. Also, iPhone recovery allows you to recover lost photos, videos, SMS, contacts, note, calendar and call history from iTunes backup file. With the free trial, you can preview all your recovered images, videos, music, documents and archive files prior purchasing this Mac Data Recovery."
    http://software.bigbigsoft.com/data-recovery-mac

  • I have an old Imac G4 from 2003. I haven't used it in years, but I would like to start. What are my options for getting it up to date? Is it even worth the trouble/cost? I was hoping to at least get it running Snow leopard, if not Lion. Options?

    I have an old Imac G4 from 2003. I would like to start using it again, however it is so out of date and runs too slowly. What are my options to update it? I really don't want to invest a ton of money - I might as well get a new one, so if there are any reasonable ways to get it to run Snow Leopard or even Lion, please help. I've also considered using a mac mini? Is that worth it either? I'm not sure which way to go here. I don't want to trash it, I feel like it can be a great computer if updated.

    Presumably it is running tiger 10.4.11?
    It may be able to run Leopard 10.5:
    Leopard system requirements:
    http://support.apple.com/kb/SP517
    But that is as far as the old PPC Macs can go, and Leopard can cost up to $200 on Amazon.

  • Old imac hard drive crashed... how to put ipod tunes into new imac's itunes

    I'm sure this is something that's been revisited a number of times already... My "old" imac (2 years old -- yes I'm ****** but let's not go there) hard drive ceased living. I literally lost everything (had all data backed up, whew!).
    Anyway, how can I put my itunes library, which is on my ipod, onto my new itunes on my new imac?
    Thanks in advance for your help, Craig

    You can't do this using regular Apple software (it's designed to work in one direction only). However if you Google "transfer from ipod to itunes" several helpful links come up with utilities you can download to do this.
    But if you have protected music on your iPod, do remember to "authorise"" your new HD first.

  • How do I use my old iMac as a third display on my new MacBook pro?

    I have both an iMac 2006 and a new 2011 MacBook Pro. I would like to use the old iMac as a second, prhaps third, monitor. How do I tturn my perfectly good iMac into a regular monitor?
    Also, within my setup, I have an extra 19" vga display and a new Yiynova 19" interactive pen display. I would like to use my macbook pro as the main coputer and the rest as displays.
    ppleas help.

    Welcome to Apple Support Communities
    If your iMac has got Mini-DVI, you have a 17, 20 or 24-inch iMac that doesn't support Target Display. Late 2009 and Mid 2010 27-inch iMacs, and iMacs with Thunderbolt can be used as external displays. Read > http://support.apple.com/kb/PH11302?viewlocale=en_US&locale=en_US
    If your old iMac doesn't support Target Display mode, you can use ScreenRecycler to use your old iMac as an extended display for the new iMac. The only thing you need is that both Macs are connected to the same network

  • Memory upgrade on an old iMac G 3 without Slot-Loading

    Hallo, i have got an old imac G 3 233 Mhz without the slot loading option and i would like to upgrade my memory, what do i have to do for installing the memory and where do i find it, i've no user manual of this computer and i did'nt find one for the old model from 1998
    Pleas help

    Welcome To Discussions Rebecomp!
    See if this iMac: Installing Memory (1 of 2), has the info you need.
    Good Luck!
    ali b

  • How to connect my new MacBook Air to a LaCie hard disk with TIme Capsule backup from my old Imac? LaCie has USB 2.0, FireWire and eSata ports.

    How can I connect my new MacBook Air to a LaCie hard disk with TIme Capsule backup from my old Imac? LaCie has USB 2.0, FireWire and eSata ports.

    You can direct connect your MBA to the LaCie via USB 2 cable.  If you have an Apple Airport Router you can USB connect the LaCie drive to the router and then use Airport Utility to configure it.  Time Machine can access it either way.

  • Is it possible to screen share an old iMac running 10.4 with a new Mac Mini running Yosemite

    Is it possible to screen share an old iMac running 10.4 with a new Mac Mini running Yosemite. I am trying to bring the old iMac screen up on the Yosemite system

    Hello! Not out of the box: OS X Mountain Lion: About screen sharing  You'll have to look for third-party options like Teamviewer

  • How can i use my old iMac as a extended desktop display for my new iMac?

    I recently purchased a 21.5 in iMac and wanted to use my old iMac as a extended desktop. My new iMac has thunderbolt and USB 3.0 connections while my old iMac has firewire (400 and 800), USB 2.0 and mini-DVI. Is this posible?

    Welcome to Apple Support Communities
    If your iMac has got Mini-DVI, you have a 17, 20 or 24-inch iMac that doesn't support Target Display. Late 2009 and Mid 2010 27-inch iMacs, and iMacs with Thunderbolt can be used as external displays. Read > http://support.apple.com/kb/PH11302?viewlocale=en_US&locale=en_US
    If your old iMac doesn't support Target Display mode, you can use ScreenRecycler to use your old iMac as an extended display for the new iMac. The only thing you need is that both Macs are connected to the same network

  • Is it possible to use the old iMac 2010 21inch as an external monitor for my 15inch Macbook retina?

    Is it possible to use the old iMac 2010 21inch as an external monitor for my 15inch Macbook retina? E.g. Using a mini-display cable to connect from the imac mini display port to thunderbolt port on my macbook.

    Apple shows only the 27" version supporting Target Display Mode.
    <http://support.apple.com/kb/HT3924>

  • My 5yr old iMac will not connect to the Internet. All other computers in the house will, including my Mac pro and iPad. What should I do?

    My 5yr old iMac will not connect to the Internet. All other computers at home will, including my Mac Pro and iPad. I'm at my wits end. What should I do?

    Which OS are you using (update your user profile).Try a
    SMC RESET
    http://support.apple.com/kb/HT3964
    Shut down the computer.
    Unplug the computer's power cord and ALL peripherals.
    Wait 15 seconds.
    Attach the computers power cable.
    Wait another 5 seconds and press the power button to turn on the computer.
    The 5 second timing is important to a successful reset.

  • I have a problelm- I am planning on buying a new iMac in March. I would like to everything in my old iMac. The problem is that I believe I have malware in my old iMac. Is there a way to transfer the material to the new iMac without the malware?

    How can I transfer material from my old imac to a new imac without ransferring malware or viruses?

    Download and run Etrecheck.  Copy and paste the results into your reply. It's a diagnostic tool that was developed by one of the most respected users here in the ASC to help identify the more obvious culprits.

  • I had a data migration done from old iMac to new iMac, how do I use that file to find my old email contacts, Safari bookmarks, etc ?

    I recently had a data migration from old iMac to new iMac 11.2
    How do I use that data file to get old email contacts, Safari bookmarks, etc ?

    FireWire cables are dirt cheap and that's how you should be doing the migration. You might have to start over, wiping the new machine's HD, and restoring the software as described in the Everything Mac manual that came with it. See Best Practices and Setup new Mac for more details.

  • I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.

    I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.

    Hi mshields1162,
    Great question, and welcome to Apple Support Communities.
    First, you may want to choose to have the sidebar displayed for familiarity:
    iTunes 11: Frequently used features
    http://support.apple.com/kb/HT5649
    Afterwards, your device should be displayed if connected:
    We'll want to click on it, and choose the Music tab at the top. Let's make sure "Sync Music" is checked:
    Afterwards, you'll have the option to sync either the entire music library (for your first iPod), or "Selected playlists, artists, albums, and genres" (for the secondary device). Upon selecting this option, four larger option boxes will appear allowing you to pick and choose what content will be synced. For audiobooks, you may need to do the above in the "Books" section. For a visual instruction on how to do this, see the following:
    iTunes 10: Sync to your iPod
    http://support.apple.com/kb/VI72
    Thanks,
    Matt M.

  • Can I hook up New Mac Mini to my old imac?

    Can I hook up New Mac Mini to my old imac to share the display? I want to upgrade my iMac since I can not add more memories... but thought may be I can add New Mac Mini and use that along with my old iMac.. Will this work?

    If your configuration supports Target Display mode, use that. If not, not without a standalone monitor and a product such as ScreenRecycler.
    (82038)

Maybe you are looking for

  • SAP Java Connectivity Builder -NoClassDefFoundError com.sap.aii...Reference

    Hi there, I'm trying to generate Java Proxies for SAPJCO using the SAP Java Connectivity Builder (JCB). I got it from the NetWeaver 6.20 Release. The tool installs and runs properly but after putting in the connection properties and klicking "next",

  • Master Data Loading Error

    Hi, While loading the master data from R/3 below error message getting. Error Message:DUMP:ABAP/4  Processor:ASSIGN_TYPE_CONFLICT. Thanks, Jayapal.

  • Network controller & PCI driver

    Hi! I just reinstalled my windows 8. But after it's finished, then my wifi is not listed. And i've checked on my device manager, my network controller and pci are not installed. Is it the main cause of my wifi being not listed? If it's right, then wh

  • Sap b1 roles and responsibilities

    Hi can anyone give me roles and responsibilities of SAP BUSINESS ONE Co-ordinator. cheers, srikanth.

  • Looking 4 who wants to be a millionaire THEME

    Hi fellows; I'm producing an amateur video-show similar to the show "Who wants to be a millionaire" through Imovie 11 ... but I don't really know how can I manage to reproduce the show theme into my production (you know, question, 4 possible answers,