Rescuing files on a time machine sparesbundle image

I have a Time Machine backup on a Time Capsule that is obviously corrupt -- when Time Machine runs, deletes a previous backup and then stops and ejects the time machine disk image. I ran Disk Utility on it for over 12 hours, and it definitely found problems, but the repair process never ended.
I think I should start with a new sparebundle image (Time Machine was using one that I had created manually to limit the maximum size), but I'd like to try to copy the files from the old sparseimage file to the new one. Is this possible? Since the two files would have the same name (Nameofbackupmachine_ethernetaddress.sparsebundle), I would have to copy the old image to my desktop and then copy its contents using Disk Utility to the Time Capsule, right?

Pondini wrote:
odysseus wrote:
I'd like to try to copy the files from the old sparseimage file to the new one. Is this possible?
Probably not. And you really don't want to, anyway.
The Finder won't copy everything properly for the new backups to work with TM, because of the unusual structure of TM backups, using "multi-links." You can use the Restore tab of Disk Utility to duplicate a partition from one disk to another, but that won't work on a Time Capsule.
Ah, I was hoping that Disk Utility could do the duplication.
Even if it would, it would copy whatever is corrupted (or fail when it encountered it), and you'd be no better off.
Unless you think your TC is failing, Your best bet is to use Airport Utility to erase it and let TM start over.
Wait a second. The spareimage file is certainly corrupt, but why do I need to erase the entire TM? I have other stuff there as I use it as a file server.

Similar Messages

  • How to get my files back from time machine on a new computer

    My laptop has been stolen so i bought a new one.
    I would like to keep the clean install but also i would like to restore my files from my time machine (on a time capsule)
    How can i do that ?

    After you do a clean install, when you first boot up, Setup Assistant will open and you can restore everything from Time Machine.
    Set up a New Mac
    Migration Assistant/Set Up Assistant - Mavericks

  • How do I access my back up files from the time machine if my computer was stolen?

    Hi, how do I access my back up files from the time machine if my mac book pro was stolen? I have a mac book air and mac too. But not sure how I can get back all the files from the stolen computer from my time capsule

    On the Mac Book Air or other Mac that you have, use Migration Assistant to transfer files from the Time Machine backups of the Mac that was taken.
    Macintosh HD > Applications > Utilities > Migration Assistant

  • PSE13 repeatedly crashing when opening more than one file at a time to layer images. [was: Feeling very frustrated.]

    Just bought Photoshop Elements 13.  I have a Macbook Pro that meets all the requirements.  I have installed and reinstalled the program but it just keeps crashing.  The program will load, when I choose the expert tab and try to open more than one file at a time to layer images it just crashes and says "Photoshop Elements has closed unexpectedly" Can anyone help me please?

    mikeobe wrote:
    OK, kinda slooow here, I hope I'm not trying your patience!? If I understand you correctly, install dummy drivers and then the drivers that came with my printer, Designating NO default printer! Then when I need to use the printer I will have to declare which one each and every time?
    Or, just intall by new printer but do not Delcare it as the Default printer, I guess in this instance there would be NO default printer?
    You may not even have the problem!
    Have you installed the new printer yet?
    There are many more people who don't see it happen than those who do.
    PS: there is always a default printer.

  • Installed new SSD. How do I get my files back from Time Machine?

    Hi all, if you take the time to read my issue, thanks a lot. I appreciate any help you can offer, and sorry if anything is unclear...
    The 1tb drive eventually failed on my 2009 27", quad core i7 imac. I had USB backup using time machine to an external 2 tb disk.
    Repair guy took my mac to his shop, and installed a new samsung 1tb SSD.
    He had trouble reinstalling from my time machine backup - so he's just installing Yosemite (I was using 10.8.x?) and giving it back to me with a fresh install of Yosemite.
    When he tried to use time machine to restore my system to how it was, he started the process, and it said that it would take 13 hours, so he left it overnight.
    When he returned, he found a white screen with a frozen mouse pointer. He did a hard reboot, and then could not access the drive at all - the system would not allow him to read the drive and he had to take the drive out, reformat from another mac, and then install Yosemite again.
    Now he has suggested that I simply drag and drop all my folders from the USB time machine backup into my computer, and seems to think this will get things back to how they were. I'm not sure that it works like that though...I'd expect certain applications need to be installed, settings changed, permissions granted, passwords entered...that kind of thing.
    Now I have a choice - whether to
    A) reinstall my applications one at a time, and then copy the data from my backup drive.
    B) manually drag and drop all the files from the most recent backup folder into the "computer" folder. (This was his suggestion)
    C) attempt some kind of migration using the Migration assistant.  (I believe this is what the guy tried- he started it off, it said "13 hours remaining) he left it running overnight, and came back to a static white screen with frozen mouse, he powered down, then when he switched it back on, the screen did not load any OS (not sure whether it had booted into some kind of BIOS, but he said it was so unresponsive that he had to remove the drive and reformat it from another computer).
    D) Try some other application for intelligently restoring my apps and data from the Time Machine backup.
    To be honest, my main concern is screwing things up badly! I'm veering towards reinstalling my apps, even if it means fixing up preference settings and typing in codes etc... I would rather take a slow and steady approach rather than a "risk having to take it back to the shop/take it apart" approach.
    Also, is migration different from restoring from time-machine?
    Perhaps you could advise me? Many thanks

    Restart the computer and hold the Command & R keys.
    Thanks - I didn't know how to do that!
    I did that, and it went through the steps for restoring from the time machine backup. I didn't click on "restore" just yet... My concern is that when the guy in the shop tried that, it resulted in the serious failure that required the drive to be removed and formatted from another computer.
    I'm wondering what might have caused that - is it possible that the external drive had a failure, or (more likely) that the drive caddy it sits in briefly lost power or something?
    Also, can you tell me if simply drag-dropping the files from the time-machine backup would result in everything returning to its initial state? Or is that (as I suspect) a bad idea?
    Right now I have a fresh Yosemite install which works. I'd rather have that, and slowly restore my files and apps manually than risk getting the same result as the guy in the shop. Do you think that restoring from the restore partition is worth trying again?

  • How can I restore files from a time machine back-up of my iMac to an EXTERNAL hard drive connected to MacBook Pro. Using Migrat

    I would like to restore files from a time machine back-up of my iMac to an EXTERNAL hard drive connected to MacBook Pro. When I tried using Migration Assistant it only gives me my internal hard drive as an option to restore to. The internal hard drive on my macbook isnt large enough to store the files.

    Welcome to Apple Support Communities
    OS X can only restore data to the drive where Time Machine backed up files from.
    If you want to restore files from the Time Machine backup onto an external drive, your only option is to access to the Time Machine drive manually (open a Finder window and choose your Time Machine drive in the Finder sidebar), navigate through its folders and copy the files you want to the external drive

  • I accidentally deleted my media files from iTunes and Trash when I was trying to move the files to an external hard drive. Is there a way to restore the media files from a Time Machine backup or from iTunes Match? What are the steps to do this?

    I accidentally deleted my media files from iTunes and Trash when I was trying to move the files to an external hard drive. Is there a way to restore the media files from a Time Machine backup or from iTunes Match? What are the steps to do this?

    If you have been backing up on Timemachine.
    All you need to do is enter time machine... Then the rest is obvious.
    Find the iTunes folder and hit 'Restor'.
    If not the only way to get all your iTunes music back is to enter iTunes Store.
    On the right hand side you should see 'Purchased'.
    Click 'purchased' and there you have it.

  • Restore files from last Time Machine backup after HD erase and install

    I just had to do an "erase and install" ... trying to restore files from my last Time Machine backup but after completing the Airport Utility setup / configure steps, it says "waiting to restart" for a few minutes and then says it cannot find TIme Capsule after restart (though TC never restarted). I'm pretty desperate to get my files back as it's Sunday night and my business needs to be up and running by morning. Any help would be greatly appreciated ... even if it's saying I need to take TC into a Mac store to have them retrieve my files.

    While in Time Machine, press the key combination shift-command-C. The front window will show all mounted volumes. All snapshots should now be accessible. Select the one you want and navigate to the files you want to restore.

  • I just received my new Mac Mini and want to migrate files from my Time Machine. I assume the old OS is on Time machine and I don't want it to supersede the new Yosemite OS. Do I have to Do anything special?

    I just received my new Mac Mini and want to migrate files from my Time Machine. I assume the old OS is on Time machine and I don't want it to supersede the new Yosemite OS. Do I have to Do anything special?

    Using Migrations Assistant will only move the data and other things over, it will not bring over a previous version of the Os since the 2014 model can run anything earlier than Yosemite.

  • File Vault and Time Machine

    Hi, I am new mac users, and I need to know how to secure my time machine drive so if you plug in to other mac should ask for password, by googling some info, I found some trick to set our mac with file vault, so all user data will be encrypted.
    but after my imac sets file vault, time machine only works for shared folders, and not realtime backup my main data and system, it inly backup when I log out or shut down my mac.
    so I assume my backup data from my time machine will not work for restoring file as normal time machine backup
    any solution for this? thanks

    Time Machine and File Vault aren't a particularly good combination.
    See #25 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum), for details and some possible alternatives.

  • I need to drag a file from my time machine backup to a usb

    I need to drag a file from my time machine backup to a usb

    You can restore it to the original location as a copy, if you have a newer version there that you want to keep. So Restoring a file from TM won't over-write a newer file.

  • Files Missing From Time Machine Backup

    I had a system crash and I'm trying to move the files from my time machine backup onto my new computer.
    The problem is that many of my files, which I know where on my desktop in folder at the time of the backups, seem to be missing. I can find the folder, but about three quarters of the files from it are gone. The ones that are in it appear to be mostly newer files that I had created not long before the last backups and the crash. As far as I go back, the files seem to be missing.
    Anyone know what might be going on?
    Does it have to do with which user I'm logged in as? Would that change what files I can see?
    Any suggestions?
    Thanks.

    Thanks for the comment. I did use the Migration Asst. to move her data and most did move, but key information, like the Safari Bookmarks, the addresses in the Address Book, and every file in the Documents folder were all missing. I finally called Apple and the tech there solved the problem. The source of the problem is that when she registered the new Mac mini, she used a slightly different User name, which then made it impossible for the new Mini to communicate with the external Backup data. The tech walked me through a multiple step process that involved adding a suffix to the original user name and so on, which has made available all the original data on the new mini.
    This is the second time in the last few years that a change in the administrator user name has created an enormous problem. While Apple notes that this user name is important, there should be a more thorough explanation of how it functions and the serious consequences that can occur if is not husbanded properly.

  • How to restore an Apple Mail draft file from a time machine backup

    How do I restore a single Apple Mail draft file from a time machine backup?

    Never mind. Just figured it out. I restored the single file, but after that I'm receiving dozens of old notifications of new Mail. Not sure why.

  • Restoring a single file from a File Vault in time machine

    I need to restore a single preference file from the TIme Machine.
    I use FileVault and when I go more than 1 day back, all I have is a single file (user.sparsebundle)
    How do I get to individual files?
    Thanks

    see the following link for instructions
    http://www.macosxhints.com/article.php?story=2007111404402514&query=time%2Bmachi ne%2Bfilevault

  • Can I selectively recover files from my Time Machine Back-up?

    After installing the most current apps from the App Store, OS X 10.8.5, Safari and iTunes,my system became disfunctional. I did not back up my system before this happened. Before these updates, I had the spinning beach ball on opening and closing apps and applications quiting or freezing. Eventually, after trying to repair by various means, I couldn't access my desktop. I went into Recovery mode and did a backup of my corrupt system and reinstalled OS. I have a good basic system now but now I would like to know, "Can I selectively recover files from my Time Machine Back-up?"

    The basic answer is Yes, but it depends on what files. Can you give an example of what type of files and where they were located.

Maybe you are looking for

  • Battery last 3 hours..no use

    my 6 month old Curve 8900 started acting up yesterday around the time of the network outage. it died very quickly yesterday after i took it off the charger at work around noon....it was in the red by about 4 or 5 with literally NO use. then last nigh

  • All captions messed up -- "A" in box

    My kid brought a software application from school and tried to run it on our iMac. since inserting it in the DVD drive, the machine is totally messed up. The system shows the letter "A" inside a box in place of every character used for every system p

  • How do I embed MS Word in a browser frame

    I am writing an applet from which I want to control MS-Word. I can't quite see how to embed Word into a frame so that my applet is rendered in a left frame while Word is running in a right hand frame. Can anyone help me with this.

  • Spool request to Excel

    Hi Gurus, I want to download spool request into excel file. Is there any function module or program is available for that? Thanks, Amal

  • Can't Connect to any Wi-Fi Network

    So today (9th Oct 2013) i connected to my works wifi perfectly fine, been using it all morning. then at luch time i left the building and turned mobile data on (and 3G). when i returned it didnt connect to the wifi. and is now displaying a "Unable To