Resend AS2 messages from the Seeburger Workbench

Hello,
We have a EDI integration scenario where we are sending an asynchronous AS2 message via the Seeburger EDI adapter. As part of sending the message, we also request a synchronous MDN.
In cases where we have successfully sent the message but not received an MDN back (due to an error in the target system), is it possible to resend the original message from the Seeburger Workbench?
Thanks
Manish

Hi,
no it's not possible. The adapter will try to re-send the message a couple of times and then will mark the message as failed.
I think you can re-send it from RWB if you have the right authorizations.
Horia

Similar Messages

Error while parsing AS2 message: DECRYPTION_ERROR in Seeburger Workbench

Dear all,
In our production SAP PI 7.1 server, we are getting the below error in the Seeburger Workbench screen.
Error:
State Error on receive, task will not be retried
"State Description Error while parsing AS2 message: DECRYPTION_ERROR # com.seeburger.ediint.edi.EDIMessageException: message decryption failed: failed to decrypt message: provider BC not found"
Imp points to note are:-
1. This error is not specific to one interface. 3-4 interface messages have this error.
2. And even for a particular interface that has this error, we could see that some messages are getting processed without any issues, and some error out, so we are not in a position to conclude anything.
Because of the above issue, many business critical messages are pending to be processed.
If any one has encountered this before error, pls share your inputs to resolve this or any workarounds to temporarily handle the issue will be appreciated.
Thanks,
Younus

Hello Younus,
We are facing exactly same problem in some of our scenarios.
It is strange that this error doesn't occur all the time ,only some messages fail with this error.
I know ,this is a worst approach,but as we couldn't find any solution,we have adopted a workaround to request partner to resend the message and this works well .
Thanks.
Regards,
Shweta

How Can I delete multiple messages from the same address in Mac Mail

Hope this is in the correct Community. Hope someone can help me to delete multiple email messages from the same email address.
At the moment I can do it by holding down the Command key and highlighting each email, but that can be difficult with many messages
to delete. Is there a quicker way?
Thanks for any help on this.

Thanks for the reply, appreciate your input. I did find another way of doing it and that is to highlight the first e-mail, hold down the shift key and click on the last one. That highlights them all and then they can all be deleted. Your ideas also work of course and I thank you for that. Cheers.

How to delete message from the fodler of AOL account using Java mail

Hello All,
I am using Java MAil API in my application, i want to delete message from AOL account's folder,
when i set the folder as "Recently Deleted" or "Trash" , i get an exception as "folder does not exist".
when i tested , some times mail is moving into Recently Deleted folder, but not every time.
this is happening in both the interface as AOl Interface or my application.
when i use folder.close(true) after setting the flag of message as DELETED. it completely remove the message from the acount.
but i want to let the message be remained in the Recently Deleted folder. what should i do.
i dont want to remove the message completely from the account.I am using IMAP also.

You'll need to figure out what the real name of the "Recently Deleted" folder is on the AOL IMAP server
(assuming it's a real folder and not some sort of "virtual" folder), then copy the message into that folder.
See the folderlist.java demo program as a way to explore the names of all the folders on the server.

How can I get rec'd text messages from the same subscriber not be appended

Hi,
Is there a way to configure the Apple iphone so that text messages from the same subscriber are displayed separately rather than appended to each other? In this way accidentally deleting one message wouldn't delete the entire history of messages from this subscriber.
When I launch the SMS service by pressing the green SMS button I am met by a screen that says Text Messages. On the left of this there is a button that says Edit and on the right there is one that is for writing a new message. Down the page are my messages all grouped by the originator of each messages. If I choose one I see that all messages from this source are present appended one after the other. There is also the option now to Clear on the top right hand corner. It is this Clear option I am worried about. If I choose Clear I am asked for a confirmation and then lo and behold as expected all my messages from this subscriber are deleted.
This is a work phone for support purposes and most of the texts will be from the telephone operator (i.e. the one same number) saying we have an email waiting to be read with a subject title giving a little description. I want to be in a position so that I don't accidentally delete the entire history of messages, say some evening when I'm tired or Monday morning if I 'm a bit asleep. Ideally I would prefer that each text message would stand alone in the Text Messages window irrespective of the originator and not be appended in a group fashion. Is there a way to do this?
Kind regards,
M

There is no way to do that on the iPhone. Messages will always be grouped into a 'conversation' based on the sender/recipient. Only Apple can change that behavior.
You can submit feedback to Apple: http://www.apple.com/feedback/iphone.html.

A message from the creator of Skype?

Hello,
a freind of mine got this kessage and I wanted to know if it is official. (I am guessing no, but better safe than sorry).
<<< Hi , this is a message from the creator of Skype and it tells you a little bit about what is going to happen to Skype on the 15th of March. Please don't send this back to the person you recieved it from. Dear Skype members, Skype is supposed to be closing down March 15th because it is becoming very overpopulated. There have been many members complaining that Skype is becoming very slow. Records show that there are many active Skype members and also many new members. We will be sending this message around to see if members are active or not. If you are active please send to 15 other users using copy+paste to show that you are still active. *Those who do not send this message within 2 weeks
will be deleted without hesitation to make more space. Send this message to all of your friends to show that you are still active and you will not be deleted. Founder of Skype...remember to send this to 15 other people so your account SEND THIS MESSAGE TO 15 FRIENDS TO KEEP YOUR SKYPE ACCOUNT—
Thank you. Peace Out.

Hi!
First of all, would the creator of Skype acually want you to send this message to 15 people? How the heck would he know!!!
1. He wouldn't know how many people it was sent to, you could've sent it to only 1!!
2. He wouldn't know the people the message was sent to.
3. Would he know if you EVEN GOT THE MESSAGE IN THE FIRST PLACE?!?!?
This is actually a scam circulating all over IMs connected to the internet. This is just a chain letter. Look at all the typos in this. So, the next time you see 'Send this to 15 people or else', DELETE.
Br,
BlackIncerator

Error message from the source system, Caller 09 contains an error message.

Hi,
Guru's, i got an error massage when my process chain is running(Daily) in BIW 7.0, the error got in Data Loading from source to PSA or data targets. The errors having the below details
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request. "
Can any body help me out of this situation what to do and how to resolv ethe problem.
Thanks and Regards,.
Taps....

Caller 09 is a very common issue - please search the forums before posting....
Arun

Ever since I enabled iMessage on my Mac Airbook, I can no longer receive text messages from the iMessage people on my iPhone, only on my iMessage now!! How do I get the messages to reach both iMessage and iPhone??

Ever since I enabled iMessage on my Mac Airbook, I can no longer receive text messages from the iMessage people on my iPhone, only on my iMessage now!! How do I get the messages to reach both iMessage and iPhone??

We are suffering very similar issues when communicating from my iphone to a friend who has both iphone and iPad enabled.
As long as I reply to an existing text chain, then it is visible on the target iphone. If I SMS the phone number, it gets routed to the IPAD!! And NO, I should not have to disable imessage when I want to send an SMS!!

Java - Axis2: How to get an error code / error message from the Javascript via SOAP

Hi
In our Java applicsation we call a Javascript in a Indesign CS Server using the following code:
--- SNIP BEGIN ---
// calls the remote service on the indesign server
try {
// create service
ServiceStub oIndsgnSrvStub = new
ServiceStub(sIndesignServer);
// create service parameter
ServiceStub.RunScriptParameters
oIndsgnSrvRSParams = new ServiceStub.RunScriptParameters();
// create arguments with source- and target-file for parameter
ServiceStub.IDSPScriptArg[] oIndsgnSrvSArgs = new ServiceStub.IDSPScriptArg[2];
oIndsgnSrvSArgs[0] = new
ServiceStub.IDSPScriptArg();
oIndsgnSrvSArgs[0].setName("xml-input");
oIndsgnSrvSArgs[0].setValue(sSourceFile);
oIndsgnSrvSArgs[1] = new
ServiceStub.IDSPScriptArg();
oIndsgnSrvSArgs[1].setName("output-file");
oIndsgnSrvSArgs[1].setValue(sTargetFile);
// define service parameter
oIndsgnSrvRSParams.setScriptArgs(oIndsgnSrvSArgs);
oIndsgnSrvRSParams.setScriptFile(sScriptFile);
oIndsgnSrvRSParams.setScriptLanguage("javascript");
oIndsgnSrvRSParams.setScriptText("");
// create runscript
ServiceStub.RunScript oIndsgnSrvRS = new ServiceStub.RunScript();
// set parameter
oIndsgnSrvRS.setRunScriptParameters(oIndsgnSrvRSParams);
//$$$ there should be an answer returned by the InddSrvr
// execute SOAP call
ServiceStub.RunScriptResult oIndsgnSrvRes = oIndsgnSrvStub.RunScript(oIndsgnSrvRS);
if(oIndsgnSrvRes.getErrorNumber() == 0) {
oServerProdJob.setProdState(CBP_Constant.REMOTEPRODUCTIONSTATE_SUCCESS);
bOK = true;
} else {
oServerProdJob.setProdState(CBP_Constant.REMOTEPRODUCTIONSTATE_FAILURE);
bOK = false;
//$$$ should be set, if there is something returned by inddsrvr
//oServerProdJob.setErrorMsg(sErrorMsg);
} catch(Exception e) {
sError += e.getMessage() + "\n";
bOK = false;
--- SNIP END -----
The problem is that we don't get the error code and/or the error message from the Javascript in oIndsgnSrvRes. The error code is always 0 if I set an Integer value as return in the Javascript. If I set a String, there is an Exception in the Java application.
Here is the Java script we use:
--- SNIP BEGIN ---
main();
main()
var sError = "";
var sXMLInput = "";
var sLayoutPath = "";
// get the SDKCodeSnippetRunner object
var cbpAdapter = app.cbpCbpadapterObject
if (cbpAdapter) {
sXMLInput=app.scriptArgs.get("xml-input");
sLayoutOutputFile=app.scriptArgs.get("output-file");
sError = cbpAdapter.doProcess(sXMLInput, sLayoutOutputFile);
return sError; // This give an Exception; if I return an Integer the ScriptResult is always 0
--- SNIP END -----
If I try this with the test application from Adobe I get the error code correctly. But in the Java application, using SOAP, I can't get the error code.
What could be wrong?
Any ideas?
Thanks a lot for the support.
Kind regards
Hans

user11340104 wrote:
Hello -
i am calling sqlplus from a bash shell script. If the sql statement generates an error, how can I return that error code (unsuccessful) back to the bash shell?
Well, let google be your friend,
http://www.google.co.in/search?rlz=1C1GGLS_enIN327IN327&sourceid=chrome&ie=UTF-8&q=sqlplus+error+codes
There are many threads I guess talking about the same issue.
HTH
Aman....

Message from the IP_IN_QUEUE is automatically dequed

Hi all,
There are 2 messages in the IP_IN_QUEUE. I tried to dequeue it from BPEL using the AQ Adapter, but it is not dequeing. One of the reason could be the Payload structure of the existing messages in the IP_IN_QUEUE is different from the Payload structure of the schema imported in the BPEL Designer.
So I thought of Enqueue a new message into the IP_IN_QUEUE and then thought of dequeue with the same message structure from BPEL thru AQ Adapter.
I am able to enqueue a new message. I can able to see a new record inserted into the table IP_QTAB for the queue IP_IN_QUEUE, corresponding to this new enqueue message. But after some times, this message is automatically dequeued from IP_IN_QUEUE(i.e the corresponding row is automatically removed IP_QTAB)
Can any one tell me how the message can be automatically dequeued from IP_IN_QUEUE. Also suggest if there are any way to find what are all the messages dequeued from IP_IN_QUEUE and what process dequeues them.
Any help is highly appreciated.

Hi,
There are no automatic processes that dequeue messages from the IP_IN_QUEUE. When you dequeue a message from the IP_IN_QUEUE, you must make sure that the consumer name matches. The default consumer name is b2buser when B2B Server enqueues to the IP_IN_QUEUE. However, the default can be overrided by the Document Routing ID in the Document Definition Parameters page. If you are enqueuing from BPEL, you may have selected something totally different. I do not know of ways to track how the message is dequeued. You may want to post that question to the Oracle AQ forum.
One suggestion is setup the tutorial so that you have the end to end scenario working. You can use the deq.bat or deq.sh in the $ORACLE_HOME/ip/tutorial/X12/runtime directory (for example, if you use the X12 tutorial) to dequeue messages from IP_IN_QUEUE. The default consumer name b2buser is assumed. After you are able to do that, then you want to try dequeueing using BPEL.
Eng

MQ Adapter does not clear the rejected message from the queue

Hi All,
I'm using a MQ Adapter to fetch the message from the queue without any Backout queue configured. However, whenever there is any bad structured message found in the queue, MQ adapter rejects the message and moves the message to the rejmsg folder but does not clear it off the queue, as a result of which it keeps retrying the same hence, filling the logs and the physical memory. Somehow we do not have any backout queue configured so I can move the message to blackout queue. I have tried configuring the jca retry properties and global jca retry as well but to no avail.
- Is it not the default behaviour of MQ Adapter to remove the rejected message from the queue irrespective of Backout queue is configured or not? The same behaviour working well with the JMS and File Adapter though.
- Is there any way I can make MQ Adapter delete the message from that queue once it is rejected?
Regards,
Neeraj Sehgal

Hi Jayson,
Check this URL which answers a problem with com.sap.engine.boot.loader.ResourceMultiParentClassLoader problem:
http://209.85.175.132/search?q=cache:RnFZ9viwuKkJ:https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.sdn.folder.sdn!2fcom.sap.sdn.folder.application!2fcom.sap.sdn.folder.roles!2fcom.sap.sdn.folder.navigationroles!2fcom.sap.sdn.role.anonymous!2fcom.sap.sdn.tln.workset.forums!2fforumtest!2fcom.sap.sdn.app.iview.forumthread%3FQuickLink%3Dthread%26tstart%3D45%26threadID%3D1020700+com.sap.engine.boot.loader.ResourceMultiParentClassLoader&hl=en&ct=clnk&cd=3&gl=in&client=firefox-a
Please check that the JDK compliance level is at 5.0
Window->Preferences->Java->Compiler->Compiler compliance level set this to 5.0
Set the installed JRE to the one you have mentioned JDK 5.0 update 16
Window->Preferences->Java->Installed JRE's->
Click on the add button to select the path of your JDK.
once completed click on the check box next to it.
regards,
AKD

Need to read messages from the log instead of displaying

Hi,
I need to read all the messages from the log with a particular log no..
i was able to display it using FM BAL_DSP_LOG_DISPLAY..But i want to collect the messages instead of displaying..To display according to my requirement..
Thanks in advance

Use this for reading :
BAL_LOG_MSG_READ
Regards
Neha

HT1277 How do I make Mail remove junk/deleted messages from the server? The only option tht works for me now is the "Remove from server" button at Account Info Messages on server.

How do I make Mail remove junk/deleted messages from the server? The only option tht works for me now is the "Remove from server" button at Account Info > Messages on server. What am I doing wrong?

Mail > Preferences… > Accounts > Advanced > Remove copy from server after retrieving a message

Database Connection Error: Cannot obtain error message from the server

I have a SQL statement that wants to add a temp table to the database.   The SQL statement works fine but when I try to add it via 'Add Command' feature in Crystal XI R2, I get the following error message:
Database Connection Error: Cannot obtain error message from the server
Any ideas?
Thanks in advance,
Zack H.

Hi Raghavendra,
I am using this in the 'Add Command' feature but I get the error message displayed in the subject line:
CREATE TABLE #TibetanYaks(
YakID char(4),
YakName char(20) )
INSERT INTO #TibetanYaks (YakID, YakName)
SELECT LastName, FirstName
FROM      Employee
WHERE      EmployeeID between '2000' and '3000'
I haven't tried to add this as a stored procedure but I imagine it will work as I have no problems yet with stored procedures. I simply want to be able to use temporary tables for the sole purpose of that session and not creating anything static in the database.
By the way, even though I get the error message, when I look on the backend database, I see that the temporary table was successfully created...its just not brought across correctly in Crystal.
Any ideas?
Zack H.

Framed IP Attribute missing in Accounting-Start messages from the ISG

Framed IP Attribute missing in Accounting-Start messages from the ISG for the TAL Users. Account-Logon users and Interim updates have the Framed-IP though.
We have the following command already enabled: aaa accounting include auth-profile framed-ip-address aaa accounting delay-start
Any ideas or workarounds please?
Debug:
Aug 27 19:36:02.213: RADIUS(00000181): Send Accounting-Request to X.X.X.X:1813 id 21647/201, len 406
Aug 27 19:36:02.213: RADIUS: authenticator 23 FC FF 1B AC 01 77 B6 - 89 FE E2 9A 4E AA 0B 32
Aug 27 19:36:02.213: RADIUS: Acct-Session-Id     [44] 10 "000001BB"
Aug 27 19:36:02.213: RADIUS: Framed-Protocol     [7]   6   PPP                       [1]
Aug 27 19:36:02.213: RADIUS: Vendor, Cisco       [26] 20
Aug 27 19:36:02.213: RADIUS:   ssg-service-info   [251] 14 "NBWAUTHSVC01"
Aug 27 19:36:02.213: RADIUS: Vendor, Cisco       [26] 34
Aug 27 19:36:02.213: RADIUS:   Cisco AVpair       [1]   28 "parent-session-id=000001BA"
Aug 27 19:36:02.213: RADIUS: User-Name           [1]   22 "[email protected]"
Aug 27 19:36:02.213: RADIUS: Acct-Status-Type    [40] 6   Start                     [1]
Aug 27 19:36:02.213: RADIUS: Vendor, Cisco       [26] 25
Aug 27 19:36:02.213: RADIUS:   Cisco AVpair       [1]   19 "portbundle=enable"
Aug 27 19:36:02.213: RADIUS: Vendor, Cisco       [26] 23
Aug 27 19:36:02.213: RADIUS:   ssg-account-info   [250] 17 "SX.X.X.X"
Aug 27 19:36:02.213: RADIUS: Calling-Station-Id [31] 19 "00-15-00-73-XX-XX"
Aug 27 19:36:02.213: RADIUS: NAS-Port-Type       [61] 6   Virtual                   [5]
Aug 27 19:36:02.213: RADIUS: NAS-Port            [5]   6   0
Aug 27 19:36:02.213: RADIUS: NAS-Port-Id         [87] 11 "0/2/0/200"
Aug 27 19:36:02.213: RADIUS: Vendor, Cisco       [26] 46
Aug 27 19:36:02.213: RADIUS:   Cisco AVpair       [1]   40 "remote-id-tag=020a00000a050001000800c8"
Aug 27 19:36:02.213: RADIUS: Vendor, Cisco       [26] 36
Aug 27 19:36:02.213: RADIUS:   Cisco AVpair       [1]   30 "vendor-class-id-tag=MSFT 5.0"
Aug 27 19:36:02.213: RADIUS: Service-Type        [6]   6   Framed                    [2]
Aug 27 19:36:02.213: RADIUS: NAS-IP-Address      [4]   6   X.X.X.X
Aug 27 19:36:02.213: RADIUS: Ascend-Session-Svr-K[151] 10
Aug 27 19:36:02.213: RADIUS:   39 45 41 39 39 36 44 44          [ 9EA996DD]
Aug 27 19:36:02.213: RADIUS: Event-Timestamp     [55] 6   1346096162
Aug 27 19:36:02.213: RADIUS: Nas-Identifier      [32] 24 "LAB-RAS01"
Aug 27 19:36:02.213: RADIUS: Acct-Delay-Time     [41] 6   0
Thanks in advance.

It seems you already have tac case opened for this issue? Let me know if that is not the case.

Resend AS2 messages from the Seeburger Workbench

Similar Messages

Maybe you are looking for