Resend Text Settings question - N8 Belle

Is there a way i can set the resend time for txt? you know when the message failed to send it will automatically send message again after 5mins, but 5 mins is too long., i want it to resend after a minute or so. 5 mins and this resend became so useless to me

 As far as I know there isn't an option to alter the resend time. What I tend to do is to manually resend the text immediately by opening the message again and tap on send.
Ray.

Similar Messages

  • Premiere rendering text with question mark

    my Premiere rendering text with question mark. it looks fine at first but then it changes. Ow! the text file is a after effects files that I opened up in premiere.

    thats okay i found the problem. it was the text in after effects. the box around the text was to small.

  • Different rich text/plain text settings for different accounts?

    I use Mail for both my work email (MS Exchange) and my personal email (webmail/IMAP). Many of my coworkers use Outlook's rich text formatting options, so I need to have my work emails go out as rich text. However I'd like to have my personal emails go out as plain text.
    I can set Mail to create new messages in plain text, but to reply in the same format of the original message. That takes care of everything EXCEPT when I compose a new message using my work address... in that case it goes out as plain text, and my coworkers complain that they can't use formatting, because their copies of Outlook are in turn configured to reply in the same format as the original message.
    So ideally what I'd like is to have two different formatting settings for my two different accounts. Anyone know how this might be done? Any plugins, etc., that might accomplish this?

    Since you are running Jaguar, Jaguar and Panther Mail do not support composing in HTML and this includes when forwarding a message received that was composed in HTML.
    Since Jaguar and Panther Mail do not support composing or forwarding HTML, you can't embed images or photos in the message body anyway.
    RTF with Tiger Mail is really HTML and although Tiger Mail does not include an HTML composer/editor, you can copy/paste HTML format from a web page and forward HTML received.
    Images/photos and single page PDF attachments are revealed as inline or viewed in place within the body of the message by default which cannot be turned off. This applies to received and sent messages which is not the same as being embedded. Embedded requires HTML and an embedded attachment is not a true attachment. All Mail.app versions render HTML received but you cannot attach a photo or image as embedded with Jaguar or Panther Mail so it doesn't matter if you use RTF or Plain Text in regards to photo/image or single page PDF attachments which appear as inline or viewed in place within the body of the message by default regardless.
    When you use Plain Text for message composition, the receiving mail client renders the text in whatever font the reader chooses.
    IMO, everyone should use Plain Text for message composition. Messages would be boring to some but the majority if not all problems experienced with email would be eliminated if HTML was banned from message composition.

  • 2 project settings questions

    Hello again
    Still experimenting with PrE8 trial version. This is my first experience with a video editor so learning all from scratch. I have a couple of questions regarding the project setting you need to chose when you create a new project. I understand these settings define the "working" enviroment for the editing process - in other words the resolution and all the other characteristics (format, frame rate, etc) that the project will use
    1) I have a camera that´s 1920x1080 30p (progressive) , the GoPro HD. When I look in the new project presets, all 1920 x 1080 presets available seem to be specifically designed for interlaced video. This is indicated by the names of the presets, and by their descriptions as well.  There is only 1 progressive preset, of a lower resolution (720p)
    Nevertheless, I tried using the HD 1080i preset, loaded some 1920x1080 progressive mp4 files, and apparently it works perfectly well. In fact when I go to edit>project settings>general window,  the project attributes indicate progressive video !!!
    Is there really any difference (or specific requirement)  in a project preset for interlaced vs progressive video? ( I am beginning to suspect that there is really no difference,  and that the coding ( i vs p) does not really form part of the project settings, and that the project will take both forms of input media)
    any thoughts on this?
    2) The GoPro has a non-standard resolution mode, HD with 4:3 aspect ratio : 1280x960 30p
    There is no project setting preset that will match this, how can I create one myself ?
    The PrE help says this is possible, but I can't find how. ( Edit>project settings will not let me change the resolution)
    from the help
    If your source footage requires a custom project preset, you can create one. The procedure for creating a preset differs if you’re changing settings for an open project versus establishing settings for a new project. Presets you create can be applied to new projects, and if you want to back up or distribute  preset files, you can find them in the Settings subfolder of the  Adobe Premiere Elements folder on your hard disk.
    http://help.adobe.com/en_US/PremiereElements/8.0/Win/Using/WS09e4b3c48f3a79fc19b622510385d 4355c-7fde.html
    Again thanks so much for your time and your help ,  much appreciated.
    Gonza

    Unfortunately you will not be able to use the video from those "sports" camcorders directly in Premiere Elements. It's just not compatible with the program.
    http://forums.adobe.com/thread/415317?tstart=0
    As you can see from this FAQ, there are three options for converting the video:
    1) Convert it a DV-AVI using MPEG Streamclip. It's a free program, but the DV-AVI it outputs will not be hi-def. It will be standard video, but it will be editable in Premiere Elements.
    2) Convert it to a standard def DV-AVI using Quicktime Pro, a $29 download from Apple.com,and edit in Premiere Elements.
    3) Use Quicktime Pro to do your editing. The video will remain a high-def MP4.
    The best solution, of course, is if the camcorder itself comes with its own editing software. That's software you KNOW will work with the camcorder's footage.
    But, short of that, you'll need to use one of the hybrid solutions above. But you will not be able to edit the footage directly in Premiere Elements. Sorry.

  • Pages Text Box Question

    Can I create a text box in Pages that can automatically scale vertically to fit the text inside?
    I'm trying to create a modular element for a template that someone can paste any amount of text into without having to manually change the vertical scale of the text box.

    Answered my own question.
    Instead of creating a text box, create a table cell.

  • Another white balance presets/settings question

    (this is related to two other posts regarding white balance presets, but didn't want to hijack those threads with my own specific questions...)
    i've got a canon s70, and have been messing around with a friends copy of aperture. the raw files of my camera are recognized (though the aperture camera support page identifies it as not optimized support), but the problem is that the white balance settings in camera are ignored.
    when i view a raw file from my camera in aperture, the exif data shows that it is recognizing different white balance settings (various numbers are displayed here, for example, 1 for auto, 3 for tungsten, 6 for manual, etc). however, the temp. and tint settings are the same for all the images, regardless of wb setting (5278K temp, -18 tint).
    so, here are my questions:
    - is there any setting i'm missing that would let aperture correctly interpet the wb temp for a specific setting? in another thread regarding canon cameras and wb someone stated that aperture reads wb 'as shot', but it seems odd that it would recognize these different wb settings but apply the same temp and tint calculations across the board.
    -i noticed that i can create white balance presets and apply them manually. i was wondering if it's possible to apply preset wb settings automatically. for example, is it possible to create an approximate wb setting for 'tungsten' (3), and then have it applied to all images with the '3' setting, either automatically on/immediately after import, or through an applescript or automator action?
    while i could use lightroom, atm lightroom is lacking some features that i crucial to my wider image management/workflow needs (though it does correctly interpret my white balance settings). aperture seems like the best bet for me, but i would rather not go through my library of raw files and manually change the wb settings for each image.
    thanks in advance for any help.

    I don't know about your other white balance issue, but yes, you can apply a white balance to a selection of images.
    Create a set of WB presets (one for daylight, cloudy, fluorescent, tungsten etc.). This takes moments and will be available on any future occasion.
    Select and apply your WB preset to an image
    Fine tune as needed (since in-camera auto white balance or presets often do not nail it)
    Select Lift/Stamp tool
    Click on your adjusted image
    In the Lift/Stamp HUD, deselect all adjustments except the WB
    Select all target images
    Click "Stamp Selected Images" button in the Lift/Stamp HUD

  • Text field questions: 1. Scrolling 2. Multiple Lines

    Hello,
    I am creating a form with Adobe LiveCycle Designer 7.
    I have two questions:
    1. When I have a text field, and I enter the text in the PDF view, it will keep going until I stop. This causes the text field to become a scroll box. How do I stop that? I want the text to stop when there is no more room left. I understand there is a length limit, but that mean I have to count the number of characters, and also estimate as to what amount off room each character takes. For example, 'i' takes a lot less room than 'Q' with the default font.
    2. I want my text field too look like this:
    TEXT FIELD: ____________________________________
    How do I do that? I can only get the caption to, when set to left, be in the middle of the field. Also I cannot see the literal 'multiple lines'.
    Thanks a lot!

    I have answer for the first question....all you need to do is copy the following JS code to enter event of each field that you have trouble with.
    var acroSOM = this.somExpression.substr(15, this.somExpression.length - 1);
    var acroField = event.target.getField(acroSOM);
    acroField.doNotScroll = true;
    I doubt there is an answer other than NO (in LC 7) for your second question.
    Good luck,
    SekharN

  • Sequence settings question

    I recently learned that whenever exporting a Quicktime file via the Quicktime Conversion method and selecting the NONE compression setting, that recompression occurs, although the selection indicates NONE (go figure). If I want to export a sequence, what selection should I use. And also, what about the Quicktime Video settings in the Sequence Settings dialogue box? What selection should I use when editing in, say, uncompressed 10bit or 8bit?
    I'm a little confused. Maybe there is an article or something out there that explains all the differences in Quicktime that someone knows about.
    Thanks, as usual, for all the help.
    Van
    G5 Dual 2Ghz    

    In a recent post, I was asking about a workflow issue I was having and the question came up. Instead of nesting a sequence, I exported it as a Quicktime movie using the Quicktime Conversion selection rather than the self-contained movie option and re-imported it, and I was concerned about any quality loss I might be introducing by doing it that way. In the "Conversion" dialogue box, you can select the codec, and I was selecting NONE. I was told not to use that setting because it recompressed the footage.
    The original sequence I was exporting was uncompressed 8bit, and the original footage was d-beta captured as NTSC 8bit.

  • PRE9 Project Settings questions

    I just got PRE9 and I am working on my first video.  The question I have is
    about project settings and resolutions, etc.  I want to output the video to both DVD and to a file that can be copied to a USB thumb drive and plugged into my l 55in HDTV for playback.  it doesn't have to be HD video, but I do want it in 16:9 widescreen atleast.
    Any suggestions?
    Thanks.

    The project setting needs to match your video source (i.e. what you are putting *IN* to PRE9). So what is the source of your clip and what settings did your camera use at the time of shooting? How did you get it into PRE9? Ideally can you run one of your video clips through the free GSpot tool and post the screen shot here.
    Getting your video output to any output (widescreen or standard) is a feature of the Share tab in PRE9. To output it to two formats (DVD and data file for your USB thumb drive) is two separate Shares that will be found under Share> Disc and Share> Computer (or possibly Share> Mobile Phones and Cameras).
    Give us a bit more detail about where and how you want to play that USB thumb drive version.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children

  • Dynamic text - newbie question

    hello,
    i'm reviewing a lesson on Lynda.com. The subject is loading
    dynamic text from an external text file. Every time I try to access
    the dynamic text i've placed on the stage, I get an error: "Cannot
    access a property or method of a null object reference."
    I have two layers. Display and Actions. (Actions at the top.)
    The display layer has a keyframe in frame 1. on it, is a large
    instance of dynamic text. The instance name I've given it is
    "external_txt".
    Actions has a keyframe. In this frame i've got Lynda's action
    script, which is:
    var textLoader:URLLoader = new URLLoader();
    var textReq: URLRequest = new
    URLRequest('text/htmlText.txt');
    function textLoaded(event:Event):void
    external_txt.text = textLoader.data;
    textLoader.load(textReq);
    textLoader.addEventListener(Event.COMPLETE, textLoaded);
    in frame 2 of the Actions layer, I have a single command:
    stop();
    When I run this I can never assign a value to my dynamic
    text. Even if I try:
    function textLoaded(event:Event):void
    external_txt.text = 'smith';
    // external_txt.text = textLoader.data;
    --I get the error about the null object reference. For some
    reason I can not get my AS to set a property to the dynamic text on
    my stage.
    my publish settings are AS 3.0.
    does anyone have an idea what i'm doing wrong? Thanks.

    hi Ned,
    you've helped me again. Thanks.
    Putting stop in the first frame makes it now work. I don't
    really understand why, though.
    I had a 'stop' in frame 2 of my actions layer. so, when i ran
    what I started out with, with 'stop' in frame 2, when the playhead
    reaches frame one why can't I assign a value to the dynamic text
    instance?
    thanks.

  • Text cursor question

    Recently moved from OS9 to OSX 10.5.8... and I've having a devil of a time with the text cursor and effectively selecting text (releasing the mouse usually releases the selected text and I seem to have to select text way under the line to actually get it to stick consistently).
    Back in the day, cursors had a "hot spot", which was the actual active pixel within the cursor's image.
    Has the "hot spot" changed a bit in the OS X text cursor, compared to OS 9?
    I'm having the same problems in almost every app.
    Am I barking up the wrong tree here?
    If not, is there some utility that can allow me to adjust the "hot spot"?
    Thanks!

    Are you using a mouse with your Macbook Pro? Are you using the Mighty Mouse or a 3rd party mouse? Have you checked your mouse settings through System Preferences or if using a 3rd party mouse the Preference Pane within System Preferences?
    is there some utility that can allow me to adjust the "hot spot"?
    Check Versiontracker, Macupdate and Google.

  • Settings questions

    I'm trying to understand this side of the ecosystems as the last iPod I had was the Classic 80GB. Soon to have the Touch, so I had some more questions.
    Amazon Appstore for Android has 30 apps for free every now and then. Is there anything like that on iTunes?
    Are there apps to limit time usage?
    Is there a way to restrict Settings, iMessage, Mail, and AirDrop?
    Thanks

    There are many free apps and the App store has a free. Frequently paid apps are free for a day or so
    You can restricts some things:
    Re: How to reset forgotten Restrictions password with iPhone restore?

  • Where are System preferences- Keyboard- Text settings saved?

    I am trying to find the Settings of my System preferences->Keyboard->Text on my drive. I deleted my whole user library, and after reloading i still find my settings in the pane( so my conclusion is they are not in the ~/Library location. Does anyone have any idea where these settings are saved on the hard drive?

    Hello Eric,
    yes, restart is done after removing the user library. Still, the shortcuts are in the system preferences pane.
    To explain why I'm after these files: I'm not trying to clear the settings, i'm actually trying to find the file, so i might safe/load them on different users.
    My biggest bet did not work: ~/Library.
    Is there any other location where I will find saves user settings?

  • Default Camera Raw settings question

    For a long time, I did not understand why do photos in Bridge that were shot in RAW appear satureted for a second and then become dull...as I understand, the first thumbnail isn't made from actual Raw with no settings, but the second one is, so it's not as "pretty".
    My question is - is there a way to set the default RAW settings so that images shot in RAW would look like the ones shot in JPG? Because i mostly shoot in RAW+JPG and I'd like the RAW duplicates to look as pretty as JPG ones by default. Is the only option manually setting RAW settings and applying it as a default?
    Thanks

    The short answer is No.
    The longer answer is Nearly, it depends.
    The full answer is:
    The initial image you see is the integrated thumbnail in the raw file, which is created at capture by the camera using its picture settings. This is not the "correct" version of the image (as there is no right or wrong way to convert raw to jpeg, just different ways). It is the version provided by the camera manufacturer using the chosen picture settings. Some may say it's the correct version, some will disagree. I say that, if you have chosen to shoot raw, you must be disagreeing to an extent.
    Adobe's default conversion will not look like the camera's conversion. Adobe has its own idea of how your picture should convert, but it sees it only as a starting point. If you'd rather have a different starting point, closer to the camera's version, you can. Adobe provides Camera profiles designed to approximate the different camera picture settings, like Camera Standard, Camera Neutral, Camera Portrait, etc., and you can use those intead. They are nearer, but not exactly. Find them on the Camera Calibration tab in Camera Raw.
    You can make these different settings default by opening a new photo in Camera Raw, changing the camera profile, tweaking any basic exposure settings, and then clicking on the little menu icon on the far right, and select Save New Camera Raw Defaults.
    But, again, I suggest that you shouldn't be trying to duplicate the jpeg, otherwise why shoot raw in the first place? Just try to get the default how you think it should look.

  • Text Edit Question:  How Do I Create/Save PLAIN TEXT??

    I've been using Macs now for over a year, and this is still an annoying quibble that I haven't sorted out. I don't know if this is the right place to raise this question or not, but there don't seem to be any other places for it, so it goes here.
    How do create and save a simple, plain text, no code, no embellishments, file using this "TextEdit" program?
    I'm familiar with Notepad in Windows. Used it for a million things for years and years. All it would do is "plain" (i.e. ascii) text. No frills whatsoever.
    No I guess TextEdit is the Mac equivalent of Notepad? But it wants to do both "plain text" and "Rich Text Format," and apparently I haven't learned how to keep them separate.
    I created a new file. I told it to make the file "plain text." Then I typed some stuff, saved and closed the file.
    But when I reopened the file, I found all this crap in the header:
    {\rtf1\ansi\ansicpg1252\cocoartf949\cocoasubrtf330
    {\fonttbl\f0\fswiss\fcharset0 Helvetica;\f1\fnil\fcharset0 LucidaGrande;}
    {\colortbl;\red255\green255\blue255;\red41\green81\blue169;}
    \margl1440\margr1440\vieww9000\viewh8400\viewkind0
    \deftab720
    \pard\pardeftab720\ql\qnatural
    \f0\fs24 \cf0 \
    And all these slashes and other code-type crap that makes the actual text I typed unreadable.
    So, somebody, please, tell me: how do I create a simple plain text file like I used to be able to do with Notepad, and not have to worry about it being all garbled when I go to re-open it.
    Should be easy, but it's not.
    --PS

    If I format fonts, even in a "plain text" document, am I going to wind up with code again when I reopen it?
    Not unless you save it as rich text.
    Why is a "plain text" document even offering me bold and italics or any other kind of formatting?
    Why would someone wanting to write plain text use bold or italics options? On the other hand, I'm sure many people would like to print and compose formatted text now and then even when they prefer to keep TextEdit in plain text mode for most of their work.
    I miss notepad. All it did was plain text. No options to confuse things. Where is the Mac equivalent of THAT??
    Try TextWrangler

Maybe you are looking for