Reservation and confimation number display
Dear all,
After production order confirmation is done,how to view the reservation number and confirmation number without using the tables.
Kindly please clarify.
Regards
Rajasekaran
Hello Raja,
Use T-code Co03 (Prod Order Display) for both reservation number and operation number.
Reservation number: Please select the Assignment tab next to general tab and where you can find out the reservation number on bottom.
Operation number: please select the operation overview tab and select the operation number and go to detail screen of the operation and on same screen confirmation field mention confirmation number on top right side.
I hope this information helpful to you,
Thanks & Regards
Umesh Mali
Similar Messages
-
Connection between Purchase order number and Confimation number in SRM
I have the purchase order number and need to find the confimation number. In which table can I find this? Can anyone help me finding the connection?
/Anders ÖhrlingIn SRM, go to Confirm Goods/Services screen, select Display/Process Confirmation in the drop-down of field 'Make a selection' , enter PO number here and click 'Start'. You should be able to see the Confirmation number below it.
Is this one you are looking. If something else, please let me know.
Thanks
Venkat -
Question about Pagination and Page Number Display
I am trying to figure out a way to display just part of the
pages if there are 50 or so pages. For examples if the user is on
page 20 I would like to the numbers to display like this:
1 ... 18 19
20 21 22 ... 50
I could do this through JavaScript I think, but I was
wondering if the library itself could do something like this.
Or if you already have something like this, send me the link
to your site. :)
www.kayak.com has a good example of this as well.
Thanks.
RobertHello Robert,
You can change the spry:if condition that may look like this:
spry:if="{ds_CurrentRowNumber} != {ds_RowNumber} &&
{ds_CurrentRowNumber} + 5 > {ds_RowNumber} &&
{ds_CurrentRowNumber} - 5 < {ds_RowNumber}"
Regards,
Cristian -
I've transferred my old number by PAT code to my new iphone and most of the time it works fine however there are problems when replying to tests and using Facetime when the original sim muber is displayed. My frined can text me on my correct number but if I reply she receives it from the different number. Also when using Facetime the number displayed is the one the came with the iphone. Anyone know what to do to get the number id correct?
Tell her to contact her carrier and get a new phone number.
-
Add Plant, item and PO number to tcode FAGLL03 as display option
Hi All,
Please explain me the ways to include PLANT, ITEM and PO number in the standard report display. The transaction code is FAGLL03.
It will display the GL line items and using 1SAP-Standard layout, there is no way to select PO number and ITEM in the change layout.
Is there any standard way to solve the issue, other that ABAP Query and ABAP report?
Please provide me your valuable solutions.
Thanks,
SunilThank you Anit,
I got the fields in the layout and again one more new fiels is required in the layout. That is Material number, i search th item field in the layout change fields list but i am unablt to find it, if you know it how to add a field to layout fields list, please let me know.
Thanks again,
Sunil -
Number Ranges-The data is locked by user ... and can be displayed only
I wanted ti define number ranges - Transaction CXEG in Consolidation, and somehow i blocked the data (message: The data is locked by user ... and can be displayed only). How i can unlock the data so i can define new number ranges for this year. Please help
Hi,
Make sure you don't have any open sessions. If not, then go to SM12, and delete the relevant locked entry.
Regards,
Eli -
Procedure to display the employee name and employee number
Dear All
can any one has the procedure to display the employee name and employee number from per_all_people_f.
Regrads
xyzcan any one has the procedure to display the employee name and employee number from per_all_people_f. https://forums.oracle.com/forums/search.jspa?threadID=&q=per_all_people_f+AND+last_name+AND+employee_number&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein -
I purchased a used iphone4 and the phone displays the previous owners apple id and prompts me for the previous owners password. how do i get rid of his info....and install my own apple id number?
Login to the app store with YOUR ID. You can't use the app store without an Apple ID. If there are apps on the phone that were purchased with the original owners ID, you do NOT own them. The owner had no legal right to give them to you and they are permanently tied to the ID that was used to purchase them.
...i was also allowed to purchase an apple network id for this phone...
I have absolutely NO IDEA what you mean by that. You can not "purchase an apple network id". -
Hi Everyone, I am using iPhone5, my question in how to display name and contact number both stored for incoming and outgoing calls? If I have saved five different numbers with a same name, how do I recognise that from which number caller is calling?
I have friends all over Europe, does it matter what number they use to call me? Nope! All incoming calls are free for me.
The only time you ever have to worry about which number is if you get charged for incoming domestic/international calls.
You can tag their number (work/home/iphone) and that may show on the CallerID accordingly.
It should show, John Doe
underneath, work/home/mobile
For example:
http://shawnblanc.net/images/img-0009-1.png -
IQ02 -Display material and Serial Number
IQ02 -Display material and Serial Number
In IQ02 If we gives Serial Number as input if that Serial Number has more than one material it is displaying one more screen in ALV display.If i select one item in that list it is going to final screen displaying Serial number details.
Now here we have a program like IQ02 (First Screen), I want that middle screen should be display in my program, I went in debug mode but i am not understanding how SAP is doing ? how can i call that middle screen..
Is there any function module or some other way available to make my job easy....
Thanks in advance,
fractalI have written like this...
submit riequi21 with dy_selm = x_indsel
with matnr in range_matnr
with sernr in range_sernr
with dy_mode = 'X'
with dy_tcode = 'IQ08'
and return.
When i execute the program, it is displaying directly the final output screen. I want the middle screen (ALV display for selecting the row) should be display, in that middle screen if i select one line it has to go to final screen.
how can i do this?
thanks,
fractal -
Displaying the Row and Column number in the report
I am trying to show row and column number in the report (not just web preview). I am using Hyperion Reports Version 7.2.5.168
use a formula column/row. use RANK function in that. (e.g. Rank([A], asc) will sort the rows based on column A values in ascending order)
you can use this rank in your heading.
But frankly this is not so easy. You have to do it in a very intelligent way, so that rank gives you column number/row number any how.
Have a try and let see if you find a appropriate solution.
Regards,
Rahul -
MBP 15.4" Display manufacturer and model number
Does anyone happen to know what the manufacturer and model number happen to be for the LCD modules in the 15.4" MacBook Pro might be? Perhaps a curious Apple Certified Technician has taken a peak during a repair...
MacBook Pro 15.4"Ok, here's an update: The Samsung module is the LN154X7. Found a picture of the sticker on the back of a module. Chi Mei has one module listed on their website that seems to match, because of size, resolution, color support and viewing angles: N154C1. Can anyone verify that this is the counterpart to the Samsung?
-
Hi Gurus,
How can i print page numbers in standard report ( FAGLL03 ) which is not available now?
I can use sy-pagno , but where exactly i need to add that , i tested the report by adding the code in end-of-page but i didnt get the output correctly . Can u kindly tell me the solution .
Waiting for ur reply ....
Regards
SrinathHi,
END-OF-PAGE
This event occurs if, while processing a list page, the system reaches the lines reserved for the page footer, or if the RESERVE statement triggers a page break. Fill the lines of the page footer in the processing block following the event keyword END-OF-PAGE:
Syntax
END-OF-PAGE.
WRITE: ....
The system only processes the processing block following END-OF-PAGE if you reserve lines for the footer in the LINE-COUNT option of the REPORT statement.
Try like this:
REPORT demo_list_end_of_page LINE-SIZE 40 LINE-COUNT 6(2)
NO STANDARD PAGE HEADING.
TOP-OF-PAGE.
WRITE: 'Page with Header and Footer'.
ULINE AT /(27).
END-OF-PAGE.
ULINE.
WRITE: /30 'Page', sy-pagno.
START-OF-SELECTION.
DO 6 TIMES.
WRITE / sy-index.
ENDDO.
This program consists of three processing blocks. The standard page header is turned off. The page length is set to six lines, where two of them are reserved for the page footer.
The list consists of three pages of six lines each. Each page is made up of the self-defined two-line page header, of two lines of actual list, and of a two-line page footer. The current page number displayed in the page footer comes from the SY-PAGNO system field.
Regards,
Bhaskar
Edited by: Bhaskar Chikine on Aug 4, 2008 9:00 PM -
Iphone 5s incoming call number displays incorrectly.
Whenever I call my wife's Iphone from work, the number displays incorrectly on her caller ID. It is always dropping the third number of the area code, so if my work number was 123-456-7890, then when I call her it shows up on her phone as 124-567-890, it doesn't even show a ten digit number. So far I have noticed that it only happens when I call her from the landlines at my work. I also have the exact same iphone 5s on the same carrier and the numbers display perfectly fine on my phone so I feel like it's some setting in the phone. Before switching to an iphone we had her contacts imported from an old Verizon flip phone, not sure if that has anything to do with it. Has anyone seen or heard of a similar issue?
Thanks,
DanBy the way I have completely reset all content and settings several times, tried turning off international assist, tried several suggestions I found online dealing with the sim pin, switched to a different phone to have the same thing happen on that phone also. I have the same exact iphone 5s and carrier and service plan and the numbers appear perfectly on my phone. I'm so confused why this is happening.
-
How can I split the video port of an older Mac Mini so I can use both the 922-6199 DVI to RCA, S-Video Adapter and a Cinema Display?
Which exact Mini?
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4
Maybe you are looking for
-
IPod Touch conflict with HP 6500 All-in-One printer...
Does anyone know of anyone who has an iPod Touch installed with an HP all-in-one printer and running under Windows 7 64 bit? If so I'd like to hear from them and see if I can pick their brains a bit. In fact, I'd like to hear from anyone who has an i
-
IN XI Opration Failed (rc=1) Message Message no. ICM006
Hi, After Installation of SAP XI i Have a Problem comeing off all the time i checked In XI Every things is Fine Expect these so i cannot do any senarios.. Can any one help me in these.. Active Services No Protocol Service Name/Port HostName KeepA
-
Printing Problems with Acrobat Pro 9.5 for Mac
I have Acrobat pro 9.5 for Mac. I'm using a Canon MG8150 multi-function printer. Everytime I try to print from Arobat Pro I get an error message. Any suggestions? I can print my pdfs from Apple Preview; so it's not the document or the printer.
-
Hi all, I am trying to sync my iPhone 4 with my mac and every time I try to sync it on iTunes the message " ...error occurred while sending data from the iPhone" I have no idea what to do about this problem and I can not find anything on any of the d
-
What is the price for Apple Pages?
How much does Apple Pages cost?