Reservation Creation in Issue Unit of Measure

Hi,
I have a product whose component has Base Unit of Measure as EACH and Issue unit of Measure is PIECE. ( 5 Piece = 1 Each) .In BOM we maintain as PIECE and in Work Scheduling view of materialMaster issue unit is maintained as PIECE. Now the issue is, when I create an order reservation is created in EACHs. (Base Unit of Measure) and same appears in Stock requirement list also.
If my Order issue Qty. is 2 PIECEs but still Reservation will be created for 1 EACH ( 5 Pieces) which upsets the requirement figure for the components.
Please suugest me if there are any ways out so that Reservation is created for Issue Unit of Measure so that correct quantity of measure can be seen....
Thanks in advance

Not sure whether it will help you.
Have you maintained the relationship in MM in Additional uom tab.
Also check t code CUNI if any conversion factor you can mention there.
Regards,
Divraj

Similar Messages

Issue unit of measure being used in purchasing tab of work order

Hi, I've got a material with a base unit of measure of 'EA'. This material has a issue unit of measure 'BOX'. When I go to add this material as a component to a work order the unit of issue 'BOX' is used as the base unit of measure. This of course is incorrect. Can anyone shed any light on this?

Not sure whether it will help you.
Have you maintained the relationship in MM in Additional uom tab.
Also check t code CUNI if any conversion factor you can mention there.
Regards,
Divraj

Creation of new unit of measurment

Gurus
How to crete the new unit of measurment which can be used for conversion and what are the tcode.
Atul Kulkarni

Hi,
You can create UoM's by using transaction CUNI.
Check for the right dimension under which the new UoM falls under..e.g.Assign the SI unit (In each dimension, a unit is defined as the SI unit. This is the basis for the conversion from one unit to another.) to the dimension if required.
Create a ISO code.The ISO code is important for EDI. It is used to convert the internal SAP measurement units into standard measurement units.
Define UoM: Be aware to give the correct commercial as well as Technical unit,the commercial unit is used in SAP whereas technical unit you can use in EDI,IDoc.You can assign the ISO code while defining UoM's.Hope this helps!
BR,
Sandeep

Creation of Basic unit of measure

Hai Guru,s
when i am going to create MM01 basic UOM PC does not exit...........when i go create UOM pc in T.code :CUNI unit of measure Tab besides what i have to select like MASS.............so...on
Thanks&regards
Anjaneyulu

Hi,
Tcode: CUNi
Path:
SAP Customizing Implementation Guide - SAP NetWeaver - General Settings - Check Units of Measurement
Click on unit of measurement and then on the top menu click on unit of measurement and then click new entry. You will be able to define UOM's
Standard settings
In the standard delivery system, units of measurement are defined according to the international system of units (SI).
For a new installation, units of measurement are delivered in all clients. For upgrades, new units of measuremente are delivered only in Client 000. They then still have to be transported to the production clients.
Recommendation
If you intend to perform cross-company data exchange, note that units of measurement with company-specific characteristics may have an adverse effect.
Activities
Check that the dimensions delivered and the associated units of measurements are complete.
If you are using EDI, you should also check the ISO codes.
Next to Tab: Unit of Measurement, is Dimension. If you have the required deimension for UoM, select the same or create one to select; else select AAAADL (No Dimension).
Hope, this may help you, some extent.
Best Regards,
Amit

Unit of measure(Pur UOM) not printing in Good issue(MB90)

Hi,
when printing using MB90 good issue,unit of measure(under heading Pur
UOM) is not printing in the report
Can you please give any tips to solve this problem?
With Regards,
Jaheer,MM consultant

HI,
Ordering Unit of Measure is different from Unit of Issue.
Please check the material master record and input the fields accordingly. this information is carried to PO from Material master record as soon as you select this material.
Now in the form you have to guide the abaper to build a layout to get the appropriate information and have the logic built to get the relavent field names into the printout depending upon the screen field.
Thanks & Regards,
Kiran

Views and Base unit of Measure is not coming in Chines Lang

HI All
Plz Help me.
I log-In Chines Server, during MM01 the views are coming in English language instead of chines.
and during PO creation The Base unit of Measure is not Coming in Chines Language it is displaying Some number??
I have maintained Source and taget lag in CUnI..but still Im getting this problem..
How to solve this plz help..
Thanks and regards
Ramesh reddy

Hi
Please maintain the translation in the Following Configuration
Logistics - General->Material Master->Configuring the Material Master->Define Structure of Data Screens for Each Screen Sequence
Select the Specific Screen Sequence & Maintain the languages
Similarly please maintain the Translations in the Transaction CUNI for the Base UOM in respective languages
I hope currently in your system only Language EN is maintained
Thanks
Madhav

Sale unit of measure is not copied into Delivery from MF60 staging

Hello all,
we are using MF60 for EWM staging. Component has base unit of measure as M2. For production purposes, issue unit of measure was set to KG.
I managed to get KG in MF60 during staging, but Outbound delivery created contains however unit M2. This is unit of issue from sales org1 tab. I changed this to KG, but still M2 is coming.
Please let me know if you know what is the problem.
Thanks in advnace!
Regards, Andrey.

Hi Andrew,
I think this issue is nothing to do with EWM. You can check with your SD consultant why sales UoM not getting copied into delivery. May be because of some delivery type or delivery item type settings.
I had same issue for over delivery tolerance, which I raised with SAP and they advised to use the customized BAdi to get it done.
Thanks,
sandip

Units of Measures found in the material master.

Hi,
What is significance of different Units of Measures found in the material master.
Ajay

Hi,
Order unit
Unit of measure in which a material is ordered. It is the default unit in purchasing functions.
Order price unit
Unit in which the vendor invoices you. The order price unit is defined in the purchase order or in the purchasing info record. If you have defined an order price unit in the PO, the goods receipt will be recorded in both the order unit and the order price unit.
Sales unit
Unit of measure in which a material is sold. It automatically appears as the default in a sales order and can be changed there.
Unit of issue
Unit of measure in which a material is issued from the warehouse/stores. You can use this unit of measure in conjunction with goods issues and physical inventory activities.
Any quantities that you specify in a unit of measure other than the base unit are automatically converted into the base unit by the system. To make this possible, you must enter the ratio for conversions between alternative units and the base unit (the conversion factor) in the material master record. You can enter this information when specifying the alternative unit of measure
Regards,
Santosh

Unit of Measurment

Hello
Can any one help me to understand the meaning/significance of diffrenet Units of Measures found in the material master
regards
Narendra

Hi,
Alternative Units of Measure
In addition to the base unit of measure, used by the system in managing stocks and carrying out all its computations, other departments can use their own units of measure.
All units of measure other than the base unit are known as alternative units. The following are examples of alternative units of measure:
Order unit
Unit of measure in which a material is ordered. It is the default unit in purchasing functions.
Order price unit
Unit in which the vendor invoices you. The order price unit is defined in the purchase order or in the purchasing info record. If you have defined an order price unit in the PO, the goods receipt will be recorded in both the order unit and the order price unit.
Sales unit
Unit of measure in which a material is sold. It automatically appears as the default in a sales order and can be changed there.
Unit of issue
Unit of measure in which a material is issued from the warehouse/stores. You can use this unit of measure in conjunction with goods issues and physical inventory activities.
Any quantities that you specify in a unit of measure other than the base unit are automatically converted into the base unit by the system. To make this possible, you must enter the ratio for conversions between alternative units and the base unit (the conversion factor) in the material master record. You can enter this information when specifying the alternative unit of measure.
Variable Units of Measure
In the material master record, you can specify that the material can be procured in a unit of measure that differs from the order unit.
If the material can be ordered in more than one unit of measure, enter 1 in the Variable order unit field.
This setting is then adopted in the purchasing info record and allows you to enter an order unit that differs from the one in the purchasing info record when creating or maintaining a purchase order or source list.
If you do not allow a variable order unit in the material master record, you must use the order unit from the material master record.
If you wish to specify a different order unit for a purchase requisition, you must assign a source with a different order unit to the requisition.
Regards,
Chinna

Multiple unit of measure

Hi All,
I would like to know the settings that are required to be maintained for a material which have alternative units of measure (Base unit of measure ; Order unit of measure and issue unit of measure )
I also have few questions
1) The materials for which we are planning to add alternative unit were created long back so will it be fine if we add alternative units of measure for that material.
2) The materials have some open orders so will it effect in any way if i add alternatvie units to those materials.
3) how to maintain different unit of issue for a same material
Please give some inputs
Regards
Pavan

Hi,
Please check the following link. It might answer some of your queries.
Re: variable order unit
Hope it helps,
Best regards
Amit Bakshi

WM MF60 different unit of measure

Hi all.
I am trying to move material from raw material warehouse (managed in WM) into production warehouse (not managed in WM). In production warehouse production order exists for manufacturing.
For transferring components between both warehouses I am using MF60 trasaction.
There are some materials that are consumed in one unit of measure (ST) but transferred in another one (CRT). Although the requirement is to transfer 1 unit for one production order, one box (containing 60 units) will transferred and this will cover the production of the next 60 production orders.
For this purpose I maintain WM unit of measure including CRT and as base unit of measure ST but the 311 movement is made based on ST unit of measure and so the TR and TO.
Did I miss any customizing? Should I use the issue unit of measure, not enough with WM unit of measure?
Many thanks in advance and best regards.

Note 880211 - Alternative Unit is ignored while transferring PDS

No alternative unit of measure specified, during creation of sales order

Dear Experts,
when user is creating sales order, User is getting the error message no. MM108 "No alternative unit of measure specified" for particular material.
we have checked the alternative unit of measure it is already maintiained in the material master.
we have checked the OSS note : 117611 - Error message MM108 during goods receipt for order, but we couldn't get exact results for our issue.
can you provide the exact reason and solution to over come this please .
Thanks in advance.
Regards,
Suresh Veerepalli

Dear Experts,
The Base Unit of Measure (L) and Sales unit (PCE) ,The alternative unit of measure is maintianed in the material master as shown below.
X                  AUn               Measuremt unit text           Y                   BUn               Measuremt unit text
1     L     l     <=>     1     L     l
1.121     KG     kg     <=>     1.000     L     l
1     PCE     Piece     <=>     1     L     l
1     BDL     Bundle     <=>     12     L     l
1     PAL     Pallet     <=>     720     L     l
Error is gettting when creation of Sales Order ,Order is standard order.
When we double click on error message the following details are shown.
1.No alternative unit of measure specified
message no:MM108
2.Diagnosis:
   This alternative unit of measure is missing.
3.System response :
   The system cannot carry out conversion
4.Prodedure:
This is due to Program error that should not occur.
Please provide the exact solution on this issuse.
Thanks

Unit of measure issue

Dear friends,
issue : for Unit of measure EA , decimal is allowed. i.e in sales order or PO system will allow 10.334 EA . I need it without Decimal.
issue resolution status: I have maintained NO decimal in T code CUNI for UOM EA. But till sytem allows Decimal . I tried with Fresh PO, SO, MB1C etc .
Please help me to resolve .

HI
In CUNI under Display area for Decemial Places see what is the valid number range maintained .
I think it is 0-14 , then input 0 instead of NO and try again

Issue: Proportion/produciton unit of measure NO is invalid for item 900001.

Hi All,
Issue: Proportion/produciton unit of measure NO is invalid for item 900001.
Here we have MTO Scenario: In outbound delivery when we do batch split & batch determination we are getting the above error.
Consider the following settings: at MM01 - Prodution/Proportion unit data is maintained with a characterstic specific to batch. Means Batch specific unit of measurement. In Work scheduling view produciton unit, unit of issue are maintained as 'NO'. All these settings are same for all material codes.
Please suggest us why we are getting the issue for perticular material coce.
Info: We resolve the issue by adding one more line item in the sales order & do the transfer posting the stock from line item to line item. But this is not the permanent solution.
Regards
Chowdary

I believe the error message no is VL 382 (Proportion/product unit of measure & invalid for item &)
You need to double click on the error message flashing on the status bar to get the error number.
I believe long text for the error message is self explainatary. Refer it and make necessary changes to resolve the issue.
Diagnosis
You want to use a proportion / product unit for an item.
You are not allowed to change the unit of measure into a proportion / product unit if:
- The following exist for a sales document item:
Preceding documents
Subsequent documents
- You are processing a scheduling agreement for the component supply industry
- You change the target unit of measure in a scheduling agreement item (and the sales unit is not a proportion / product unit)
- You are processing a customer requirements plan
- The following exist for a delivery item:
Preceding documents
Subsequent documents
Batch split items
- You are processing a batch split item
Procedure
Use a different unit of measure.
If you want to change the target unit of measure into a proportion / product unit in a scheduling agreement item, you need to change the sales unit accordingly. The system then sets the target unit of measure to the same as the sales unit.
Further, if you are working on older version, refer SAP Note 364206 - VLSP:indic.for proportion/product quantities deletd.
Regards
JP

Error as unit of measure PC not defined for language RO while creation ofPO

Hi GUYS,
When am trying to create a PO in ME21N transaction i got error as below,
unit of measure PC not defined for language RU
Message no. 06079
Table 006A contains no entry for this unit of measure
Please let me know what action to be taken from my side to over come this issue.
Note: If i check the related vendor i could able to view that the language maintained as RU.
Cheers,
Kumar.S

Hi Jurgen,
Thanks for your reply once again.
As mentioned by you earlier i have tried to login with languae RU in Q system but unfortunately i got an error saying taht language not installed.
Also we found for Language - EN and UOM - PC has been maintianed in T006A table.But if i check for lanugage - RU and UOM PC combinatoin has not manintaned in T006A table.
Please let me know how to maintain the values in this table T006A for combination Lang - RU and UOM - PC.
Please revert back with your soilution.
Note: I have tried in SM30 but failed due to below error
The maintenance dialog for T006A is incomplete or not defined
Cheers,
Kumar.S

Reservation Creation in Issue Unit of Measure

Similar Messages

Maybe you are looking for