Reservation line item missing upon posting

Dear SAP gurus and expert,
Currently there is one Reservation with 89 line item, there are about 20 line items already posted goods issue. and the remaining is yet to be posted.
The movement type of the SR is 201, so the SR is being posted in MIIGO. When the SR is being entered, only 13 line item of the SR is extracted in MIGO instead of 69 line items.
Kindly advise and consult.
Thank you
Regards
Leonard Tan

Hi,
I guess you are using the option Goods Issue-Reservation in MIGO.
Are you saying only 13 line items are displayed in the MIGO screen - this is the limitation of the screen? Did you try navigating down the MIGO screen?
Of only reservation item 13 is displayed?
Regards
Prabhu

Similar Messages

Business Area for Vendor Line Items during Payroll Posting

Dear All
We are in ECC 6 version of SAP. We are using Business Area for Internal Financial Statement. We are facing a problem with regard to Business area in Payroll posting. Business area does not appear in vendor line items when we make posting of payroll for multiple business area. We have setting technical accounts for HR. We read SAP note 203276 and it seems that it is possible. Can someone tell us what is the reason that business area not coming in vendor line item while payroll posting.

Hi
That part we have already done. The problem only come when we run payroll and there are vendors belonging to several business area in that case system keep the business area field blank. In case if we set field status required system give error. That is why we run payroll by each business area we also have maintained technical account for 1001.
Regards

Make changes to the line item depending upon doc type n sp. GL ind in F-48

I want to make changes to the line item depending upon the document type and special GL indication for the transaction code F-48.
Depending upon document type and special GL indicator i want to calculate the work contract tax during simulation in transaction code F-48.

Hi,
You want to deduct WCT when you use particular document type and special gl indicator.
I just want to know the reason why you want to determine the WCT based on the above conditions.
I created WCT as withholding tax types and assigned to vendor master. So when the user booking transactions he will choose the respective WCT tax type and tax code so system will deduct the amount and the same updated in WITH_ITEM.
Or you made a down payment request through T.code F-47 and when you want to book the actual transaction in F-48 then choose line item from down payment request.
Give me your requirement in clear if the above is not clear
Regards,
Sankar

No control line for line item - error while posting bd to accounting

Hi all,
Billing document showing err "no control line for line item" while posting to accounting doc.Sales document is complete no in completion logs.
Previous errr: g/l missing for line item" in order incompletion after maintaining company code for customer, then refresh the g/l missing for line item is no more logs and showing the error "no control line for line item" while posting bd to accts.
Please help
Regards
anush

Hello Anush,
if the company data of the payer was not created when the sales order has been created, then the system could not create the correct records in table VBREVK. Once the company data has been maintained the VBREVK records could be corrected by re-saving the sales, but only if no billing document exists.
In your case you already created the billing document.
Please try these step:
1. reverse billing document
2. run VA02 add a blank char to PO number, save
3. create new billing document
Best regards,
Ivano.

Line item missing from FBL3N report

Line item is missing from FBL3N report. I am selecting correct parameters for FBL3N report.
The correct balance is shown in the FS10N report.
I have checked the document, it is not reversed.
Can anyone please tell me the reason for the same?

HI ,
If its related to 2009 and are you sure that you have selected fiscal year or date in which that document falls .
Can you Do one thing Please go to Dynamic selection of FBL3N and put that document number in Document number field and then find out whether that documents come or not .
if it does then please look at posting date and GL accounts etc for that and check the header data as well.
May document is related to different company code .
One more thing Please check when you run FS10N display line item can you see document there if you can then definatley you will be able to see .
Please attached the screen shot of document with header data .
Many Thanks
Regards.

Reservation line item text - non update issue

Hi,
We have a custom BDC (call tran) to create reservation. One of the fields for the reservation is line item text. We had this program from July 2008 onwards and we have no issues. All of sudden from 01/15/09 , the line item text is not being populated in the reservation, but reservation creation is working as before. We checked our system, there is no change to that program and infact we had only 2 transports on that day and they are related to FI and not related to MM or reservation at all.
We did all our debugging, but this is inside a wrapper RFC and the RFC is called from EAI subsystem. (Tibco) The SQL trace and RFC trace shows all data of RESB being updated except this text. We are going crazy on this since it is such a simple BDC program and working fine so far and stopped all of sudden.
My question is, are there any config which all of sudden made this field not available for input or something like that? I tried in config, but I couldn't find anything.
Can you help on this? Thanks,
The other crazy parts are,
1. We tried writing the BDCTAB into a unix file, but the file is not created - one of the reason could be the user is CPIC user and may not have authorization to write to unix inspite of this user has sap all access
2. We tried writing the dump into a custom table, but even that is not working. But when we execute this in SE37 manually, it is creating both unix file (in development) and updating the table as well.
Regards,
Sundar.

It's sure that something changed between the last run and 01/15/09. A few ideas :
- When the program is run, start an authorization trace, and give missing authorizations to CPIC until there is no more authorization problem (this is the most important thing to do first !)
- Make sure that you program displays correctly all CALL TRANSACTION messages and exceptions also.
- Analyze customizing imported between the 2 runs of this program (look at transport requests in the import queue log).
- "Save" importing parameters so that to redo the test (with CPIC user) :
-- change the program to write the BDCDATA to a batch input session (BDC_OPEN_GROUP, etc., SM35), and so test it later.
-- save them to test data as indicated by [note 517767 Automatically generate test data at function module call|http://service.sap.com/sap/support/notes/517767]

ICR Process 2 - Line Item Missing from Reconciliation Step FBICR2

Dear Experts,
I am very close to process 002 working well. I have a scenario I am hoping you can help with:
1. I posted two intercompany documents
(Screenshot of Both Documents Here: http://img139.imageshack.us/img139/7264/documentsposted1of2.png)
2. Data Assignment and Reconcilation is run and three of the line items are automatically assigned, the forth is missing
(See screenshot here: http://img412.imageshack.us/img412/7334/missing4thlineitem2of2.png)
Note: The missing item appears in List of Total Documents and List of Records in the auxilary programs
Where is the $14USD debit to G/L Account 'IC Rev'? Any insight would be greatly appreciated.
Thanks,
John Scime
+1-716-803-4920

If I unassign the line it only appears in the hierarchy tree undor Company 10 /TP 20 and on the Company 10 unassign box in the dashboard.
If I go to the hieracy tree under Company 20/TP10 the other half of the document is there under Company 10 unassign box in the dashboard.
This is strange because both records will not show up on a single screen and therefore (ie. one record on the Company unassigned box and the other in the TP unassign box), they cannot be manually assigned.
Any ideas how I can bring there screens together (Ideally Auto-matching, but Ill take anything at this point)
Thanks

Withholding tax line items are not post

Hi,
I was configured all the steps for extended withholding tax up to Assign withholding tax to vendor master data
and the i am used to post an vendor invoice
given all required feild and press enrer and display the withhoding tax codes screen here also press enter button .... i entered all required field and go to simulation this posting i am getting only 2 line items
like for eg: --- Inventory Debit , Vendor Credit only
here my problem is i am not getting the all with holding tax line items
please hepl
Sree

Dear Sree,
if You defined the WT type at the payment time, the WT line items will be created at the payment time and not during the invoice posting.
Please check.
Mauri

One line item missing from PO created using Shopping cart

Hello Team, we have raised a shopping cart with 6 line items, having the same vendor and account assignment details. Once the shopping cart was approved the PO was created but the 3rd line item was missing in the PO. When we checked in BBP_PD, the 3rd line item is still showing as item in transfer process. Can anyone please throw some light to this issue. All the line items were approved.
Thanks.
Richa

Hi Richa,
Is there any error in RZ20 for that shopping cart?
Best Regards,
Bharathi

Substitution of Business Area for Tax Line Items for Invoices posted in MM

Hi
We have one Business Area for every company code. A substitution rule has been created to populate Business Area in Tax Line Items, while booking vendor invoice. The substitution rule has been defined as
Prerequite
Company Code = 1234 and GL = 1323232
Substitution
Business Area = 6668
The system is working fine, when the Vendor Invoice is posted through FI. However, when the vendor invoice is generated through MIRO or MIR7, the Business Area is not substituted.
In Table VWTYGB01, we have maintained BSEG-GSBER as a field allowed for substitution with Boolean Class 09.
We have created the susbstitution rule for Text and Assignment also and the rules are working fine for all document posted through FI and MM
Regards
Sanil
Sanil K Bhandari

Hi
Business Area is a sensitive field, agreed. However, the substitution rule is working fine for FI posted documents and the issue is in MM generated documents.
Regards
Sanil Bhandari

Actual line items KSB1 some line items missing

Hello friends
i am facing a issue related with transaction code KSB1 ,
i have posted cost center through FB60 and able to view the same document by fb03 & actual cost document by KSB5
but i am not able to see that item from standard ksb1.
when i execute the same report for privious fiscal years i am to see the line items .
but not a single document for the current period ? why ?
i have checked for authorization also but that is also ok .
thanks in advance .
Sachin S. Joshi

Thanks A P
but i am making proper selection , as i have mentioned i am able to get results for the privious fiscal years posting ,
second thing i am able to view the same document with KSB5 which is not appearing in KSB1 report for the current period.
Thanks
Sachin

Different currency in line items for GL posting

Hi
Is there any possibility of having different currency for line items, if so send me sample code for the same. This is needed for me for Inter company GL Accouting posting.
Thanks
Basani

Is the GL account a recon account?
You need to use t code FBL3N.
However in FS00 check the settings for Line Item display in the Control Data tab.

Identifying the line items on a posted document

Hi guys!
I am doing a program Acounts Payable Voucher. On fb01, I made a transaction and posted it. After the document has been posted, Input Vat and Witholding Tax are included in the line item. The amount is already been calculated.
My problem is how will I separate <b>Input Vat and Witholding Tax</b> from the other line items? I have identified the other line item <i>Vendor</i> from the others using posting key. But the rest may have the same posting keys.
Thanks!

yes it'll populate the received quantity (which you would have generally entered in the Quantity tab). There is a field for Recipient as well (which is what I think you refer to as receiver). You may need to scroll right for this, but as you are the receiver in all cases, just copy paste from Excel
You can enter all of this at one go. Try it out and let me know.

How to split ACC_DOCUMNET03 IDOC after 100 line items for given posting

Hi Friends,
I need to create an IDOC based on the company code and posting date & a particular company code for a given date has reached 100 line items then create another IDOC for that.
EX:
I have 150 Line Items in file
120 Items are related to Company Code "1100" and remaining 30 related to company code "1200"
For this i need to create IDOC's like this
one IDOC with 100 line items which will contain 1100 company code
second IDOC with 20 line items which will contain 1100 company code
Third IDOC with 30 line items which contain 1200 company code
I assume that this can be done through UDF.
Please can you guys help me this.
Thanks in advance.
Thanks,
Vivek.

chk this:
/people/claus.wallacher/blog/2006/06/29/message-splitting-using-the-graphical-mapping-tool

Reservation line item text non - update

Hi,
We have a custom BDC (call tran) to create reservation. One of the fields for the reservation is line item text. We had this program from July 2008 onwards and we have no issues. All of sudden from 01/15/09 , the line item text is not being populated in the reservation, but reservation creation is working as before. We checked our system, there is no change to that program and infact we had only 2 transports on that day and they are related to FI and not related to MM or reservation at all.
We did all our debugging, but this is inside a wrapper RFC and the RFC is called from EAI subsystem. (Tibco) The SQL trace and RFC trace shows all data of RESB being updated except this text. We are going crazy on this since it is such a simple BDC program and working fine so far and stopped all of sudden.
My question is, are there any config which all of sudden made this field not available for input or something like that? I tried in config, but I couldn't find anything.
Can you help on this? Thanks,
The other crazy parts are,
1. We tried writing the BDCTAB into a unix file, but the file is not created - one of the reason could be the user is CPIC user and may not have authorization to write to unix inspite of this user has sap all access
2. We tried writing the dump into a custom table, but even that is not working. But when we execute this in SE37 manually, it is creating both unix file (in development) and updating the table as well.
Regards,
Sundar.

It solved by itself

Reservation line item missing upon posting

Similar Messages

Maybe you are looking for