Reservation link with rounding profile

Dear all
I have a requirement that assignment of rounding profile in material master should check the reservation Qty,....means....
entry of resevation qty get rounded off according to the value given in rounding profile.........Does it possible?If yes.....suggest the way.

Hey nsimpson,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
The domain policy definitely sounds like it could be causing an issue. Do you get any specific errors when you try to open BlackBerry Link when you're not connected to the corporate network? Also can you install applications when you're away from the corporate network? Also is the application installed to a network drive or your local hard drive?
I look forward to your reply.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Similar Messages

No rounding with rounding profil when conversion Roundg Unit Purch Unit

Hello,
I have a trouble when I try to make a purchase order with a material which has this data:
Base unit ST
Purchase unit on info record : CAR
Rouding profil on info record : only with unit PAQ (%+ 50 ; %-50)
Variable purchase order unit : 1 active.
CAR = 10 ST
PAQ = 5 ST
When I make a purchase order, the quantity is only rounding with the purchase unit.
Does anybody know why?
Thanks a lot for your help.
Sarah
Edited by: Sarah Ah on May 24, 2011 11:15 AM

Hi
Its quite difficult to suggest something based on your inputs.
In purchase orders, the system rounds to the unit of measure most suitable for logistics purposes.
You can refer the documentation on dynamic rounding profile
http://help.sap.com/erp2005_ehp_03/helpdata/en/4c/420da3470a11d1894a0000e8323352/frameset.htm
Thanks !
E.Avudaiappan

Rounding profile: convert ordered qty to another UoM

Hi all,
I would like to convert the ordered qty on the sales order into a different unit of measure. This can be done with rounding profile. However, I don't want it to round if it is not exact.
For example: 1 case = 100 EA. If a customer orders 100 EA, it will automatically convert it to 1 case. This should work.
However, if customer orders 75 EA, I don't want it to auto round to 100EA (and convert to 1 case). Instead I want an error to occur, or atleast give the user the option to round or not round.
How can this be done?
Thanks

Rounding profile is used to adjust the order proposal quantity to deliverable units.
Sales unit will default the order item to cases (As entered in material master).
Now, if you want to give an options to the user
1st thing to check at order item level is
1. Is the Sales order UOM = Sales UOM of material (VBAP-VRKME = MVKE-VRKME)
If not then
Check if the sales order unit satisfies the conversion factor (if VBAP - VRKME can be converted to MVKE-VRKME)
If yes then change the sales order unit and make it equal to material sales unit
If not then
switch off round up, have a pop up asking user for pop-up
You will have to utilize
1. Rounding,
2. Sales unit of Material
3. Exit to change VBAP.
4. Screen changes for pop up.
<< Moderator message - Point begging removed >>
Edited by: Rob Burbank on Dec 13, 2011 8:57 AM

Linking my Contact Profile with my BBM Profile...

Just bought a new Bold 9700 and loving it.
I managed to create multiple Contacts Profiles, BBM Profiles, and link it all to Facebook.
I have my own personal profiles which, at one point, were linked to my Facebook profile and were using my Facebook profile picture.
Subsequently I decided to change my BBM profile pic to a custom one, didn't like it, and wanted it changed back to my Facebook profile pic. I didn't know how to accomplish this, but thought that if I un-linked my BBM profile from my Contacts profile (which was still using by FB profile pic) and then linked them again then my BBM profile pic would automatically reset to my FB pic.
However, I cannot, for the life of me, figure out how to connect or link or whatever my Contact Profile with my BBM Profile.
Can anybody offer some help? I feel like I'm going crazy over here.
Thanks in advance,
Peachey

I read your post prior to posting this. I agree that on the long term, a single profile would be cool. But I also like the differences of forums and communities, and having diffrent providers might be the prize you need to pay for this.
I'm more interested in short-term workarounds at the moment. Philosophically I also like to have a cloud identity, so I'm fine with a set of options to interlink my profiles. All the profiles offer some options to link to some web2.0-services (facebook, twitter, icq), the community profile has a field for the forum profile.
I also don't want to just discuss this on a technical level, but in the field of information management. If someone clicks on my profile, what information might this person be intersted in (and which information I want to provide). Well, it wont be a nice woman looking for a data but more likely some other engineer/technican/scientist or someone from a HR department that wants to check my technical expertise in different fields. So for them I would like to display a kind of top-ten charts where I am good at or interested in.
BTW: A personal messanger would be cool for this as well, so I could for example contact someone that was pretty active on the forums for let's say SMTP and directly ask this person if he/she can help my with my own SMTP problem.
I've seen this (some time ago) completley HR related on the joelonsoftware blog, where they where introducing a service (pretty expensive) for HR-departments where they could check the profiles (CVs) against the activity on the stackOverflow.
Don't misunderstand me, I'm not currently looking for a job, I target this with a technical knownledge-sharing intention. If I know that a memeber of the forums has some expertise I need, I'd like to have a look if this person hasn't founded a community for exactly this topic before asking.
Felix
www.aescusoft.de
My latest community nugget on producer/consumer design
My current blog: A journey through uml

Rounding Down Values / Rounding Profile in Delivery

Hi
I have a query regarding Rounding down Value / Rounding Profile
Our system currently rounds to full case pack if the customer orders in partial quantity.
Please advise if it is possible to only round DOWN to full case Pack.
This is a customer specific requirement not applicable to all. customer does not want to round up.
Plse help me with configuration.
Thanks
Rajesh

Hi Raazesh,
Please check the below link if you can use it for your purpose. Also there are lot of similar links in SDN which you can search and use.
How to do automatic rounding in outbound delivery?
rounding profile in delivery!!
Regards,
Sampat
Edited by: Sampat Vijay Sadalge on Jun 21, 2011 1:38 PM

What happens sales order linked with wip job is cancelled

HI,
what happens sales order linked with wip job is cancelled ?
actually if wip job is cancelled then sales order lines is on hold ?
i wanted to know what if sales order of that wip job item line is cancelled say example if that wip job already is in processing .
please help me
Thanks in Advance.

If WIP job cancelled or Requisition/PO is cancelled, corresponding order line reservation will be cleared and will go to 'Supply Eligible' Status. Progressing this line will again follow the WIP/Requisition path based on item.

I am on a shared computer with several profiles. I had to delete my profile and create a new one. Now, my question. It transferred to Purchased Items to the new iTunes, so how do I get the rest of the songs to transfer to new iTunes?

I am on a shared computer with several profiles. I had to delete my profile and create a new one. Now, my question. It transferred to Purchased Items to the new iTunes, so how do I get the rest of the songs to transfer to new iTunes?

It sounds like you might have broken links to your content. Either repair these by putting the files you've recovered where iTunes expects to find them or delete the broken entries then go to iTunes Store > Purchased > Music > Not on This Computer, and click the download links.
If you have an Apple device see also Recover your iTunes library from your iPod or iOS device.
tt2

Getting ORA-12518 error with DG4ODBC for link with SQL Server

Hi all,
We have recently upgraded a test box to 11g2 on a 64bit windows platform and now when setting up our database links with our sql servers we are recieving an 'ORA-12518' error.
listener.ora
LISTENERPCIS =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = WILTS-ORCL4)(PORT = 1522))
SID_LIST_LISTENERPCIS =
(SID_LIST =
(SID_DESC =
(PROGRAM = dg4odbc)
(SID_NAME = PCIS)
(ORACLE_HOME = c:\oracle\product\11.2.0\db_1)
tnsnames.ora
PCIS =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = WILTS-ORCL4)(PORT = 1522))
(CONNECT_DATA =
(SID = PCIS)
(HS = OK)
Any help appericated
Cheers
David

C:\Users\administrator.ADMIN>tnsping pcis
TNS Ping Utility for 64-bit Windows: Version 11.2.0.1.0 - Production on 24-JUN-2
010 20:55:29
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
C:\ORACLE\PRODUCT\11.2.0\DBhome_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = localhos
t)(PORT = 1522)) (CONNECT_DATA = (SID = PCIS)) (HS = OK))
OK (0 msec)
C:\Users\administrator.ADMIN>lsnrctl status LISTENERPCIS
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 24-JUN-2010 20:55
:47
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1522)))
STATUS of the LISTENER
Alias listenerpcis
Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date 24-JUN-2010 20:55:17
Uptime 0 days 0 hr. 0 min. 30 sec
Trace Level admin
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\ORACLE\PRODUCT\11.2.0\DBhome_1\network\admin\listen
er.ora
Listener Log File c:\oracle\product\11.2.0\diag\tnslsnr\WILTS-ORCL4\listenerpcis\alert\log.xml
Listener Trace File c:\oracle\product\11.2.0\diag\tnslsnr\WILTS-ORCL4\listenerpcis\trace\ora_12216_2424.trc
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1522)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\PNPKEYipc)))
Services Summary...
Service "PCIS" has 1 instance(s).
Instance "PCIS", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
C:\Users\administrator.ADMIN>dg4odbc
Oracle Corporation --- THURSDAY JUN 24 2010 20:55:54.257
Heterogeneous Agent Release 11.2.0.1.0 - 64bit Production Built with
Oracle Database Gateway for ODBC
C:\Users\administrator.ADMIN>

How to connect Toshiba TL838 with facebook profile?

How to connect Toshiba TL838 with facebook profile?
When i try to connect toshiba generate email with info and links to connect accounts facebook with toshiba places but when i click links i see only errors.
_*EDIT*_
*Ok i flashed QR code with my phone and is connecter now :)*
Moderators please close thead
Message was edited by: junioreks

>Ok i flashed QR code with my phone and is connecter now :)
Thanks for sharing!

Usage of rounding profile in manual created production order

Hi,
We are making usage of various static rounding profiles.
For each of the materials produced, the rounding qty can be different, depending on the workcenters used to produce the materials (but for one material, there is only 1 rounding profile possible)
This works fine as long as we create planned orders via MRP runs (rounds up according the values set)
However, this rounding value is not taken into account (proposal, warning, error,..) when a user creates a planned order manually via MD11 or a production order via CO01.
Furthermore there is no warning message or whatever at the moment a user is converting a planned order (with a correct calculated rounded value) into a production order and manuaaly adapts the order qty.
As were are talking about a few 1000 different materials, the production planner cannot know all by heart and the rounding proposal would be excellent.
Anybody an idea how to implement this ?
Thanks and regards?

Hello again,
thanks for you prompt answer.
This would certainly solve our problem in case we would have always one and the same quantity to produce for a given material; but this is not always te case.
Perhaps it was not clearly explained in my first mail, but we would like to work with one (1) ROUNDING PROFILE per material.
Example, material A can be produced in multiples of 14; as such it should be possible for the production planner to create production orders for 14, 28, 42 , 56,..... pieces. When entering a order for eg. 25 pieces (= example the qty needed for a certain sales order), the system shpuld round to 28.
Other materials (having another rounding profile) are produced in multiples 3, im mulitples of 5,...
For this particular plant we have about 50 different rounding profiles in place.
So it somewhat logic that a production planner does not know all these by heart.
If you have a solution for this as well, please let me know.
Anyway already my thanks for feedback.
Regards.
Danny

Server with same Profile cannot access same networking

Hi,
I have a lab running 1 x Nexus 5010, 2 x FIC 6120'XP's, UCS 5108 and 2 x B200 M2 Blades. I have configured everything per flexpod guidelines (except I have only 1 Nexus). I boot from SAN over Fibre and zoning everything is working 100% My firmware is 2.1(1f)
Question:
Assinged to each blade is 2 vNICs connected to FabricA and FabricB (FabricA = port-channel from FICA to Nexus and FabricB = port-channel from FICB to Nexus - Nexus has 2 different port-channels conf for each link to each FIC)
After I install VMware, I tag vlan 10 (management vlan) for the management traffic of each VMware node. The funny thing is when I ping server 2, iget a response but not from server 1. Both are configured using the same service profile. If I ping server 1 from server 2, I get a response. This leads me to believe that for some reason the traffic is not leaving the FIC from server 1, but it is when using server 2. I have attached screenshots of both servers vifpaths.
Can someone please help urgently as this is driving me crazy as I do not know what the hell is going on.
Cheers

Hello
Hope this solution will help.
Just found my notes on deleting the users profile:
"Deleted Profile logs back in with temporary profile.
This problem occurs if the current user's profile was accidentally deleted from the system.
Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry
1. Log on to the system by using an administrative user account other than the user account that is experiencing the problem.
2. Back up all data in the current user's profile folder if the profile folder still exists, and then delete the profile folder. By default, the profile resides in the following location:
%SystemDrive%\Users\UserName
3. Click Start, type regedit in the Start Search box, and then press ENTER.
If you are prompted for an administrator password or for confirmation, type your password, or click Continue.
4.Locate the following registry subkey:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
5.Under the ProfileList subkey, delete the subkey that is named SID.bak.
Note SID is a placeholder for the security identifier (SID) of the user account that is experiencing the problem. The SID.bak subkey should contain a ProfileImagePath registry entry that points to the original profile folder of the user account that is experiencing the problem.
6. Exit Registry Editor.
7. Log off the system.
8. Log on to the system again."
& for more information kindly check the below link too :- http://community.spiceworks.com/topic/187995-network-pc-cannot-access-1-specific-server .
Regards
keshav

After SysPrep Windows Logs Users In With Temporary Profile

I have created a Windows 8.1 Pro image which was created by installing from the DVD. On first login I put windows into audit mode and installed all software and customised. I then ran sysprep with an unattend file with "copy profile" set to true.
Once the image is loaded onto a new PC it is joined to our domain and if I login as a Domain Admin things are fine, but if I login as a Domain User it logs the user in with a temporary profile which disappears at log off. The fact that Domain Admins
can login successfully suggests it is permissions but I am not sure where or why. To create the image I used Microsoft best practice as detailed on the MSDN. It is not a corrupted profile as there are no domain users have been logged on prior to capturing
the image. I am using DISM to capture and deploy. I did use the ADK to create the unattend file.
Does anyone have any suggestions as to what might be causing this behaviour?
Thanks
JeffW

Hi,
We have not heard from you in a couple of days. Please post back at your convenience if we can assist further.
If the above suggestions doesn't work, We'd collect PROFILE.ETL to further troubleshoot the issue.
a. Log onto the machine as an administrator.
b. Select the start menu
c. Type cmd in "Start Search"
d. Right click on cmd under “programs”
e. Select "Run as administrator"
f. Enable the User Profile Service Tracing using the following command in the new-opened elevated command prompt at the root of the C drive:
logman -start profile -p {eb7428f5-ab1f-4322-a4cc-1f1a9b2c5e98} 255 3 -ets
g. Do not Log off as the current user and switch to logon as the user who receives the profile problem (please tell me the user name).
h. Once the user experiences profile issue, please switch back as the administrator.
i. Stop the User Profile Service Tracing using the following command in an elevated command prompt
logman -stop profile -ets
j. Gather the profile.etl file in the root of the C drive and upload it to a shared space like Onedrive and shared the link here.
Kate Li
TechNet Community Support

PDF goto named destination link with current zoom level

Hi,
I am created PDF file from 3b2 software with many links and bookmarks, The links with in documents are created with named destination bookmark names.
When I am click the link to navigate with in document it will goto the bookmarked location and zoom level will changed into “FIT TO WIDTH” but I am want to navigate over the document with current zoom level from the link where I am clicked.
For this process I am tried one method that is javascript action in link.
Using link properties
Action -> Add Action -> Select Action (Run Javascript)
Script
main()
function main()
var zoom = this.zoom;
this.gotonameddest(“bk1”);
this.zoom = zoom;
By this method I am get what I am looking but I am having one problem,
First I will goto that book marked page with and after only it will fit to the current zoom level, so when I am go for previous view it will goback to "FIT TO WIDTH" zoom level, so this method failed.
And also I am unable to edit all the links in my PDF document by Manually.
So please advice me what is right way to navigate over the document with current zoom level from link where I am clicked.
Note:
The output PDF document will contain 100 number of links so I want to update all the links with my requirement by automation.
Is there is any way to handle this process by Acrobat SDK with C# , .NET
Regard
Thirusanguraja V

Thank you Very much,
If you do't mind could you give me sample PS file with,
Destinations specify a particular location in a file, and a zoom factor.
The zoom level must be current zoom level of the page where i am link click.
Sample PS syntax i am tryed:
[/Dest /bmkaff1 /Rect [2000 3062 2100 2886] /View [/XYZ 0 0 0] /LNK pdfmark
Reference I am used for this:
pdfmark Reference
© 2006 Adobe Systems Incorporated. All rights reserved.
Adobe® Acrobat® SDK 8.0 pdfmark Reference for Microsoft® Windows®, Mac OS®, Linux®, and UNIX®
Edition 1.0, November 2006
Chapter 3 : 3 Actions and Destinations................44

Wikiserver strips out links with question marks

Since installing a fresh copy of yosemite and server 4, I've noticed the wiki server no longer allows links with question marks.
This makes it impossible to create links that are based on tags
eg https://myserver/wiki/find?tags=mytag
I also use the wiki to share links to a auto login page with also needs a question mark.
Is this something that can be added to the the whitelist ?

Cheers Linc
I have sort of got round it by using a link shortening service, not ideal but works for now

Rounding Profile in IS-Retail

Hallo Retail Expert,
The Scenario is as follow,
I have some Articles that I order by vendors only in defined Quantity,
for ex. 3, 6, 9, 12 or 5, 10, 15 or 12, 24, 36 Pieces. For this purpose
I am using Rounding Profile and I have defined regarding my requirement.
It Works really good when I work with Variants. When I create Purchase
Orders per IDOCs it works fine because there I use only Variants. But
when I try to create Purchase order manual in TA: ME21N with Generic
Article, there this Rounding Profile (Quantity Addition/Subtraction
profiles) doesnu2019t work. There comes a Pop-up with all the Variants,
where I gave my required quantity. At that point this examination
doesnu2019t work. It work only when I work with variants.
I am assigning rounding profile in Article Master at Purchasing View
Level (Article/Vendor/Purch.Org).
I cannot use Standard (Unit of measure is the order unit) because Piece on Inbound Delivery.
Could you please suggest me why at Generic Article level it doesnu2019t
work?
Is there any other possibility in Retail?
Any suggestion is Welcome.
Thank you in advance.
Regards,
Nilesh

Hi all,
as far as I know, the rounding functionality is not performed on the generic article. The rounding profile is considered only when the variants are entered directly in the PO. This is standard behaviour.
I cannot give the reason for this logic implemented. Maybe it would be a possibility to make an enhancement in the PO?
Regards
Tobias

Reservation link with rounding profile

Similar Messages

Maybe you are looking for