Reservation storage location
If there is shortage of stock to fulfill reservation reuirement , I want that reservation storage location should be appeared in purchase requisition so that when the stock is received from vendor, it can be directly posted to desired storage location.
Can anybody help ?
Dear
As explained by my freinds if you have configured the MRP run at storage location level then after MRP run the system will generate requirements as per the requirement types collective or individual that you have mantained in the Material master for an particular material.
So the point i want to make over here is you can default the storage location in PR through MRP run also while creating Po from the generated PR (thu MRP).
Its upto you that you want seperate PO or single Po for two diffrent PR.
And at the time of GR the storage location will be copied from the Po though at the GR level you can post the stock to any other storage location as per your need.
Coming to your second question that you want to post the stock to an storage location against an reservation, for that i strongly belive that you will have to do one more transaction for the same ie issue or transfer posting against the reservation. Not possible at the GR level.
Reward if usefull
Regards
Sujoy
Similar Messages
-
Receiving storage location in reservation created manually CAN NOT change
Hello All,
i created a reservation manually by transaction MB21 with std movement type 311, then i can not change the receiving storage location in transaction MB22 due to the field status of receiving storage location is display only, but not optional. That means i can not change receiving storage location of reservation if i entry mistaken.
So, how can i change the receiving storage locaiton by MB22 for a open new reservation? thanks.
Best Regard
Joseph Chenin mb22 if the field is in display mode, it is not possible to change.
It is not possibsle to change through screen layout for reservations.
so delete the present one and crate new reservation. -
Multiple receivng storage locations on Reservation (movement type 311)
Hi
We have a requirement where we create a reservation document either using BAPI or BDC (MB21). At the time of creation we require to maintain different receiving storage location on the reservation. Currently SAP allows to maintain receiving storage location on the header field RKPF - UMLGO only and then copies the same value on all line item field (RESB-UMLGO)..The line item field is not editable or set as I/O field therefore working on finding a user exit or BADI to update fields RESB - UMLGO in background. Has any one had this requirement and in case yes can you please advise how was this addressed.
Thanks
LokeshHi,
If my understanding is correct. You want to transfer post a stock of material from one storage location to another ( IM perspective ) and from one bin to another bin belonging to different storage types but same plant ( WM perspective ).
As this transfer posting does not involve any Sales order what is the logic behind the selection of movement type 311 E.
I hope you can very well make use of 311 movement type for the transfer posting in IM which will lead to the generation of a PCN in the WM side. On confirming the same you will be able to do the reflection of Transfer posting in WM side also.
I would suggest you to follow the above steps.
1) First check the transfer posting 311 E which you have already completed a PCN in the background. If it is availble, just try to confirm the posting Change notice which will clear off the negative entry and a correponding postitive entry in the receiving storage type.
2) In case if the system have not generated the PCN, then better to cancel the material docuemnt and re do the transfer posting to carry out the process from the start with the movement type 311 which will yield a PCN which can be confirmed to see the stock in the required storage type and in the respective bin accoring to the strategy set.
Regards, -
Unrestricted Stock of issuing Storage Location in reservation
Hi Experts,
We have a requirement, we want that unresticted stock of issuing storage location is printed on reservation (MB23) Thru MB25.
How it is possible.
Kindly help me out, can we use sqvi or something else.
Regards
GRHI ,
Just Modify this Report with the help of a Abaper and ask him to add an additional column in the report that is the Stock in the unrestricted use for this Material and Plant
combination.
TO achieve the Since we know the Material ,plant and storage location
PIck up the Material Number --RESB-MATNR
the Plant code --RESB-WERKS
the storage LOcation--RESB-LGORT
Go to Table RESB table in this table against the Feilds RSNUM -Reservation NUmber and RSPOS( Reservation item number)
IN some cases the storage location would not be entered by the user ,take care ,he enters the storage location by every user ,so make it mandatory in the screen layout.
After Picking up all the three values ,pass those values in the Table.
MARD line item vise present in the reservation (maintain a loop for the same)
in this table pick up value in the Feild MARD-LABST which is the stock in the unrestricted use.
one thing ,i dont know the exact requiremnet ,but it is to resrict the user from creation of reservation more than the stock ,it can be done by avaliability check.
hope so it helps
Regards
Anjanna. -
Updation of Replenishment storage location in MF60 ( reservation creation )
Hello,
In REM, we are using MF60 for two step material staging.
We have gone for two stage staging process.
First shop person will create reservation and then the store person will issue the material against the reservation.
Here when the resrvation is getting created , user
do not want to give the replenishment storage location on the sap screen.
User considers this as a pain.
Is there any way to bring the replenishment storage location
automatically updated in the reservation?
Please let me know in both scenarios,
scenario one --- by using inventory management
scenario two --- by using warehouse management.
Waiting for reply from Experts.
Regrads,
Ravindra DeokuleHello Mahesh,
Thanks for your reply.
Your suggestion was valid if we were working with single step stock transfer process.
But as stated in the question , we are working with two stage process.
Here the stock determination button itself is not appearing on the SAP screen in MF60.
So I think your answer is not right Or may be let me know how
to bring the stock determination button on the SAP screen when you are creating the reservation.
Waiting for your reply.
Regards
Ravindra Deokule -
Replenishmant storage location in MF60(reservation creation)
Hello,
In REM, we are using MF60 for two step material staging.
We have gone for two stage staging process.
First shop person will create reservation and then the store person will issue the material against the reservation.
Here when the resrvation is getting created , user
do not want to give the replenishment storage location on the sap screen.
User considers this as a pain.
Is there any way to bring the replenishment storage location
automatically updated in the reservation?
Please let me know in both scenarios,
scenario one --- by using inventory management
scenario two --- by using warehouse management.
Waiting for reply from Experts.
Regrads,
Ravindra DeokuleHello Mahesh,
Thanks for your reply.
Your suggestion was valid if we were working with single step stock transfer process.
But as stated in the question , we are working with two stage process.
Here the stock determination button itself is not appearing on the SAP screen in MF60.
So I think your answer is not right Or may be let me know how
to bring the stock determination button on the SAP screen when you are creating the reservation.
Waiting for your reply.
Regards
Ravindra Deokule -
Need to change Storage location for reservations in production order
During Production order creation we need to assign storage location against all the reservations in production order. Is there a way it can be done??
Hi,
check the user exit EXIT_SAPLCOSD_001.
Sudheer.A -
Automatic storage location view creation in maintenace order (IW31)
Hello,
Seems like I need some help.
Have configured automatic storage location view creation for GR and reservation. Configured movement types are 101, 201, 261. While creating reservations (201, 261 mvmnt. types) with mb21 the sloc view is automatically created in material master, and everything seems fine.
But in iw31 when I specify material number and sloc in a Components tab, I get an error message CO312: "The storage location data is not created". Automatic reservation is not created, and maintenance order can not be saved. Movement type 261 is used for automatic reservations for the maintenance order.
If I configure message CO312 as a (W)arning message, then it allows me to save the order and reservation, but sloc view in material master still is not created. Think that's not good and may lead to MRP issues.
How can I configure automatic sloc view creation in iw31? Is that possible?
Edited by: Konstantin Dudura on Nov 17, 2009 8:11 PMHi,
The customization required for Automatic Storage location creation at reservation are:
Goto : SPRO -> MM -> inventory Management and physical inventory -> Goods issue/ Transfer posting -> Create storage location automatically
first of all go to Plant and tick the automatic Storage location creation for the Plant. After that goto Movement type and tick the automatic Storage location for movement type 261.
Regards -
MRP Run in an excluded Storage Location
Hello all. I have this situation.
I have material X with two storage locations: SL01 and SL02. Storage location SL01 has 15 pieces and SL02 has 5 pieces. In MD04, I can see a total of 20 pieces under the "Stock" MRP Element.
Material X also has five Order Reservations (OrdRes), for 5 pieces each. These Order Reservations are assigned to Storage Location SL02, because stock is procured from there.
What I want is to have the "Stock" line only show me the stock of SL01 (Stock = 15 pieces). I want SAP to "ignore" whatever it has in SL02 and only consider the stock in SL01, so MRP Run would give a proposal of 5 pieces.
I tried deactivating SL02 in Material Master MRP4 for material X, but then the MRP Run doesn't generate any proposals because my reservations are in SL02, and it's deactivated. Even if my Availability Check is set not to look at "storage location", if I the requirement is in SL02, it won't propose anything.
Is there any other solution to my problem? How can I have the system ignore the stock in SL02, but still propose those 5 pieces I'm missing in SL01?I have material X with two storage locations: SL01 and SL02. Storage location SL01 has 15 pieces and SL02 has 5 pieces. In MD04, I can see a total of 20 pieces under the "Stock" MRP Element.
Material X also has five Order Reservations (OrdRes), for 5 pieces each. These Order Reservations are assigned to Storage Location SL02, because stock is procured from there.
What I want is to have the "Stock" line only show me the stock of SL01 (Stock = 15 pieces). I want SAP to "ignore" whatever it has in SL02 and only consider the stock in SL01, so MRP Run would give a proposal of 5 pieces.
Sorry, but your logic is not clear to me...
your stock:
5 pcs (SL02) + 15 (SL01) = 20 pcs
your requirements
5 x 5 pcs (SL02) = 25 pcs
Procurment proposal (w/o excluding SLoc):
20 pcs (stock) - 25 pcs (requirements) = -5 pcs > procurement proposal 5 pcs
You are saying:
What I want is to have the "Stock" line only show me the stock of SL01 (Stock = 15 pieces). I want SAP to "ignore" whatever it has in SL02 and only consider the stock in SL01, so MRP Run would give a proposal of 5 pieces.
So, you can see MRP will give a procurement proposal of 5 pcs without any SLoc exclusion...
Please clarify your requirement / business process. Why don't you want to consider the stock in Sloc2? What is your process?
You can see that you cannot exclude a SLoc with Sloc MRP and still consider the requirements relevant to that SLoc (unless you use reorder point planning in that SLoc).
Thanks,
Csaba -
BAPI_GOODSMVT_CREATE - Error Storage location not supported...
Dear All
I am creating the material movement documetn 561 (MB1C) using BAPI_GOODSMVT_CREATE.
Howeever, the BAPI returns me the error saying
Storage location not supported.
What is this about. Can someone give me hint
I searched the forum and not able to find it.
Regards,
VenkyHi Venky,
Are you creating a goods issue with reference to a reservation? If so, the documentation states that the storage location is only needed if it's not in the reservation.
The following fields may have to be populated in some cases (this is not a complete list):
Storage location (if not planned in the reservation)
Brenda -
How can I include the minimum stock of storage location in the mrp run.
Hi all,
I have in plant 1030 storage location 1001 and 1006.
MRP1 Lot Size = EX
MRP type = PD
Reorder Point = 5
MRP2 Safety Stock = 5
MRP4 for 1001 is not filled
MRP4 for 1006 Sloc MRP Ind = 2
Reorder point = 2
Replenishment qty = 3
If no stock and I run the mrp I get
a PurRqs for 8 with a automatic MtlRes of 3 going to storage loc 1006
If I create a reservation in 1006 for 10 units and run the MRP again
a PurRqs for 15 with a MtlRes of 10 going to storage loc 1006.
I want the result to be PurRqs for 18 with a MtlRes of 13 going to storage loc 1006.
10 for the reservation and 3 to fill storage loc 1006 with the replenishment qty.
How can I acheive this?
Best Regards!
CurtisHello Curtins
Please observe what is stated on question 6 of FAQ note 550954, regarding storage locations planned separately:
6. Question:
A storage location should be planned separately. Is it possible to
consider external requirements?
Answer:
No. The storage location MRP is a very simple reorder point planning
procedure, during which only reorder point and replenishment
quantity are defined. More complex settings can be implemented via
storage location MRP areas.
Therefore, I'd suggest you to use MRP areas to map this scenario.
Best Regards
Caetano Almeida -
MD04 - Subreq - Storage location MRP area
Hi all,
I have an issue of Subreq in MD04 which is not assigned to the the good MRP area.
I'm explaining :
Business process
-> I work with a subcontractor
case 1 : either I buy raw material to be processed and delivered it directly to my subcontractor
case 2 : either I send raw material from my physical stock to my subcontractor
-> I create subcontracting purchase order with indication as components, the raw material.
-> In case of the components are already in my subcontractor (case 1), the reservation (Subreq) should not consume my physical stock.
-> In case of the components are in my physical stock (case 2), the reservation (Subreq) should consume the physical stock.
Solution choosen
Then I decided to create a storage location MRP area : "EXTERN" as External.
I assigned a storage location "EXT" to this MRP area.
I assigned this MRP area to the material in MRP1 / MRP Area.
In the purchase order, in the components popup,
For case 1 : I assigned "EXT" as Prod.Stor.Loc and Supply area
For case 2 : nothing special is filled
Issue
For the case 1, althought I assigned the storage location "EXT", the Subcontractor Requirement is not attached to the good MRP area.
WHY?
Remark : I didn't use the subcontracting MRP area because I would like to have 2 cases : case 1 & case 2.
Thank you in advance for your help about this problem which make me nervous !Hello Catherine
Your system is working as designed. The following note explains the system design in more detail:
503497 - Subcontracting and MRP areas
Take a look on the relevant information provided by this note below:
Reason and Prerequisites
The most important point to understand the system behavior is the fact that the withdrawal of the (subcontracting) component is generally carried out during the goods receipt for an SC procurement proposalfrom the subcontractor stock that is managed at plant level from an inventory management point of view and that has no reference to a storage location at all.
This causes that subcontractor requirements can never enter a storage location MRP area, since you can later not post the withdrawal from this MRP area.
Thus SC-requirements always enter the SC segment of the plant MRP area or the SC-MRP area.
The SC MRP area in turn is supplied by stock transfer reservations from the plant MRP area or via third-party order processing through procurement proposals with goods receipt directly to the subcontractor. A supply through the materials planning from a storage location MRP area is not possible.
For the above reason, SC-requirements do also not carry any storage location, since the storage location does not have any control function at all for SC-requirements:
You cannot and you should not determine a storage location MRP area (see above), and the subcontractor MRP area is determined via the vendor of the procurement proposal, thus it is independent of the storage location.
See also Note 376050 on this topic that makes a modification available which prevents the deletion of the storage location in the subcontractor requirements, so that you can use, for example, customer-specific reports to analyze the storage location.
Please observe that the mentioned modification note 376050 only makes the storage location available on table RESB, so that you can use it on custom report. This modification will not make the storage location to be considered by MRP or on MD04.
BR
Caetano -
The business does not want to use MRP areas to segregate materials between service part and production. What they want to do is separate service parts on deliveries at our shipping storage types (915/916) from MRP view. This requirement is primarily for our international shipping area. We may pick parts for an international shipment and the parts will sit on the delivery - not goods issued because we don't want to invoice - for up to 3 months. During that time, MRP sees the inventory so replenishment is not done in a timely fashion or parts may get stolen from the shipment for a production requirement because the inventory is seen.
Could one solution be to create a non-MRP relevant storage location (say 1200) and place the shipping storage types in this storage location? Then when the transfer order creates, the system would show the source to be from the MRP relevant SLoc (1100), stype (130), bin (A-01-A), - these are examples - with the destination to be to non-MRP relevant SLoc 1200, stype 915, bin (dynamic using the delivery number) 0080745298? Has anyone had this type of request or know of a way to satisfy the business requirements without different MRP areas? They also do not want to have two transfer orders - one with a 601 movement and one with a 311 movement.
Any known solutions or outside-the-box thinking would greatly appreciated.
MarlaI don't have the solution, just some critical questions and hints
Even a non-MRP relevant storage location can be warehouse managed.
The stock is shown in any stock list as long it is not goods issued, no matter if it is stored in a
non-MRP relevant storage location.
Stock that is picked for a delivery is not available for others, it is reserved. A delivery is a MRP element and hence should be taken into consideration in the planning run.
A non-MRP relevant storage location will only solve your planning issues if you move the material there if it is not yet picked and allocated to a delivery.
Do your thieves really use SAP to check if the stock is there, or do they just see the stock in the warehouse? As said, the non-MRP relevant storage location will not solve this issue since the stock is still visible. -
What are the list of .stock by storage location
hi, iwant to devlop the report to stock by storage location.give me description about a report to list of .stock by storage location. what are the functional spects for this report, what are the tables and fields we have to used for this report plz give me sample report.
Dear Radha Krishna,
You can either use program RMMMBESTN (from SE38) or TCode MMBE. However, you can copy the above program into a 'Z' program and change the logic if your requirement is not served by the standard report or you want to enhance the same.
Go through standard Reports:
MMBE Stock Overview
MB52 List of Warehouse Stocks on Hand
MB53 Display Plant Stock Availability
MB54 Consignment Stocks
MB5B Stocks for Posting Date
MB5K Stock Consistency Check
MB5L List of Stock Values: Balances
MB5T Stock in transit CC
MB5W List of Stock Values
MBBS Display valuated special stock
MBLB Stocks at Subcontractor
MBSF Release Blocked Stock via Mat. Doc.
MBW1 Special stocks via WWW
MC.1 INVCO: Plant Anal. Selection: Stock
MC.5 INVCO: SLoc Anal. Selection, Stock
MC.9 INVCO: Material Anal.Selection,Stock
MC.D INVCO: MRP Cntrllr.Anal.Sel. Stock
MC.H INVCO: Business Area Anal.Sel. Stock
MC.L INVCO: Mat.Group Analysis Sel. Stock
MC.P INVCO: Division Analysis Sel. Stock
MC.T INVCO: Mat.Type Anal.Selection Stock
MC48 INVCO: Anal. of Current Stock Values
MC49 INVCO: Mean Stock Values
MC50 INVCO: Analysis of Dead Stock
MC8M Read Opening Stocks
MCB) INVCO: Long-Term Stock Selection
MCC4 Set Up INVCO Info Structs.from Stock
MCH: RIS: STRPS/Mvmts + Stock - Selection
MCKJ Selection version tree: Stock
MCKR User-spec. sel. vers. tree: Stock
MCNB BW: Initialize Stock Balances
MCSK Call Standard Analyses of Stocks
MD04 Display Stock/Requirements Situation
ME27 Create Stock Transport Order
ME2O SC Stock Monitoring (Vendor)
MF65 Stock Transfer for Reservation
MI35 Batch Input: Post Zero Stock Balance
MIQ1 Batch Input: PhInvDoc. Project Stock
MM73 Special Stocks: Preparation
MM74 Archive Special Stocks
MM75 Display Archive of Special Stocks
MMBE_OLD Stock Overview
MMN1 Create Non-Stock Material &
MS04 Planning Scenario: Stock/Reqmts List
MS29 Calculate Sim. Initial Stock
Tables:
MKPF Header: Material Document
MSEG Document Segment: Material
IKPF Header: Physical Inventory Document
ISEG Physical Inventory Document Items
SBSE Stock Mngmt Levels for Inventory Sampling
SKPF Header Data: Inventory Sampling
SLGH Elements of Stock Population
SSCH Strata of Inventory Sampling
T156 Movement Type
MSKA Sales Order Stock
MSKAH Sales Order Stock: History
MSKU Special Stocks with Customer
MSKUH Special Stocks at Customer: History
MSLB Special Stocks with Vendor
MSLBH Special Stocks at Vendor: History
MSPR Project Stock
MSPRH Project Stock: History
MSSAH Total Sales Order Stocks: History
MSSL Total Special Stocks with Vendor
MSSQ Project Stock Total
MSSQH Total Project Stocks: History
http://goldenink.com/abap/files_in_sap.html
http://www.erpgenie.com/abap/tables.htm
Regards,
Naveen. -
Transfer material from Storage location to Storage type.
Hello,
At the time of usage decision we are posting the stock in "To Reserve stock" for that we have created seperate storage location ie for Sample material.
we having two samples one is customer sample and other is in house sample both the samples we are posting in same storage location.
Client want to differentiate these two samples, so we have created two storage types.
Now My question is " can we transfer the samples in different storage types from Storage location.
This is the QM and WM integration.
Please advice
Thanks in advance.
Regards
AnilHello Anil
I don't think you can transfer from storage location to storage type.
If your purpose is to differentiate these two samples, then why not use different Sample types with different number ranges and thus identify them. You don't have to get into QM-WM integration just for that.
If you want you may also set up 2 different physical sample locations: That would be ideal.
SPRO/IMG/Quality Management/Quality Inspection/Sample Management/Define Physical-Sample Types
SPRO/IMG/Quality Management/Quality Inspection/Sample Management/Define Number Range
SPRO/IMG/Quality Management/Quality Inspection/Sample Management/Define Physical-Sample Locations
On the application side you may use the sample management procedures to deal with samples. See the following link:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/b8/b9b3341a933f50e10000009b38f83b/frameset.htm
Does that work? Let me know.
Maybe you are looking for
-
Adobe Muse not recognising my FTP host information
I had a friend make me up a site on AdobeMuse. Since then I have the file and Muse and have been editing the site. However when I try and upload to FTP Host Muse tells me my username and password details are incorrect. When my friend tries on his com
-
How to check for the sub folder in the document library Is already Exist using CSOM?
Hi, My requirement is to create the folder and sub folder in SharePoint document library. If already exist leave it or create the new folder and the subfolder in the Document library using client side object model I able to check for the parent fold
-
Difference between General Ledger Accounting (New) and Old
Hello All, Please help me with the below: 1)Could any one please explain the difference between General Ledger Accounting (New) and General Ledger Accounting (Old). After going through the help document I understood that the BI 7 version came up with
-
Why is only 2gb Storage showing for my Creative Cloud account when I have paid for the Photography plan and should be entitled to 20gb?
-
Limit for numeric values ?
Hello, I'm using a trial version of FormsCentral (Acrobat Pro XI) and when trying to define the range of values in a text box with number format option I do not see any, nor to set the number of decimal places (only I see options to set as Mandatory