Reservations archving

Hello Experts
Our customer is using the 3.1 version . Now we are facing the problem that when we run MD04, for material and plant , system is taking lot of time and it is not giving any results and giving dump error after some time .
We already consulted to SAP and they suggested to archive the open reservations against schedule agreements and all other type documents .
When i tried to open the reservation using MB23 which is showing in RSEB table , system giving error that the document does not exist . Can anybody tell me how to see the reservations and how to archive the open / closed reservations . is there any standard program or object exsist in 3.1 version for archiving the reservation ?
This is very critical situation we are facing . kindly help me in this regard .
Your quick response is appreciated .Waiting for your valuable response .
If any more information required , kindly feel free to contact me on undersigned mobile number .
Thnx & Reg
Pavan G Kulkarni
+919052391140

Hi Jurgen
Thanks for your response .
we are unable to archive the reservations which are showing in RESB table.
When we are archiving this reservations the system giving error message that set the deletion variant first . all the reservations showing in RESB table are having the requirement type BB or SB. we are not understanding the what is requirement type. Kindly let me know how to archive this data. due to this we are unable to execute the MD04 transaction. Ssytem is taking lot of time to execute
Kindly let me know if you have any procedure , how to archive this data .we wrote the same issue to SAP. they provided the object PP_ORDER to archive , but it seems the all reservations are related to subcontracting PO component reservations .
Kindly let us know to go with this .
Waiting for your response
Kind regards
PAvan Kulkarni

Similar Messages

In alv report , how to reserve 20 lines from beginning of page

hi experts
in alv report , how to reserve 20 lines from beginning of page.
regards
subhasis.

If by reserve you mean should not move on scrolling then make them KEY from fieldcatalog.
But I think maximum of 10-12 can be handled by that.
Regards,
Amit
Reward all helpful replies.

A/P Reserve Invoice closes Source PO - But A/P Credit Memo does not open it

Hi Forum,
1. Create a PO with say a single line item
2. Create a target A/P Reserve Invoice from above PO
Note: The PO of step 1 is closed.
I want the PO to again go to OPEN STATUS.
3.I perform A/P Credit Memo from base document (A/P Reserve Invoice) from step 2 above.
Question: The status of PO does not become open. Is there a setting that I am missing here which would make the status of PO go to open again?
Thank you for your help.

Hi Syed Aleem,
go to Administration -> System Initialisation -> Document Settings -> Per document -> Purchase Order
Place a tick in the checkbox 'Reopen Doc. by creating returns/Goods Returns/Credit Notes Based in It' & update.
All the best,
Kerstin

Issue reg creation of reservation

Hi all,
I am trying to create a reservation.
I have given a plant and storage location for a material by checking in table mard.
for some reason ,its says storage location not supported even though the mard
table has the same plant and storage location for that material.
it sometimes says only 1 quantity available.
what should i do in order to increase the quantity available.
waiting for your replies

Hi Deepthi,
Check,
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-log-mm/reservation-1179743
Regards,
Azaz.

Keep getting error message when trying to sign in to make a Genius Bar Reservation

Keep getting error message when trying to sign in to make a Genius Bar Reservation

Make the reservation by phone.

Create Goods Receipt PO from AP Reserve Invoice (bug?)

Via the user interface of sap2005 pl7 you can create "Goods Receipt PO" from an "AP Reserve Invoice".
In the "base type" field of goods receipt the value "18" is displayed. This seems not to be a "valid value" and it is as a consequence not possible to read the contents of this field with the UI-API, because <i>base type</i> is a combo box and only valid values can be returned.
Is there a workaround to get a none valid value from a combobox?

Hi Jurgen,
It looks like it is a bug and that the same bug exists on the sales side of the DI API. Herewith a post that you can read about it.
/thread/48329 [original link is broken]
Hope it helps,
Adele

Bloqueio de reservas de materiais de contas razão especificas na transação IW32

Gostaria de saber se é possível realizar o bloqueio de materiais de uma especifica conta razão, em reservas em ordens de serviço pela transação IW32.
Estou com problemas no controle de custo de materiais que são utilizados pelo setor de produção, e estão na conta razão da manutenção. Para isso eu gostaria de bloquear somente as reservas de materiais da conta razão da manutenção.
É possivel?

Olá Rafael,
Qual o centro de custo alocado ao material/equipamento?
Na imagem está destacado o campo "componente"
Os materiais nele inseridos serão reservados de acordo com o depósito configurado. Não seria melhor apontar um outro depósito?

Error:Unable to reserve .lok file for Integrated WLS server (DefaultServer)

Hi,
I am having jdev 11.1.1.1.0.
Many times I get following error while running my application pages:
Unable to reserve the .lok file for Integrated WLS server (DefaultServer). Typically this is because another instance of this server is already running in the WLS domain.
The only way out is to close jdev, delete system11.1.1.1.33.54.07 folder and open jdev again.
Why is this error dialog shown? Is there any permanent solution?
TIA

Thanks for quick reply!
As suggested in the given thread, I logged into the weblogic console http://127.0.0.1:7101/console/ as 'weblogic' user.
On the left hand side in the 'View changes and restarts' section, no pending changes are shown. It shows following text:
Configuration editing is enabled. Future changes will automatically be activated as you modify, add or delete items in this domain.
Please advise. I can share the application.zip if needed.
Thanks

How to check connection from SAP to reservation system?

Dear Experts,
May I know how to check whether the connection between SAP and the reservation system has been set up and ready to use?
Thanks.

Hi
You need to check the identification code issued to the enterprise by AMADEUS must be entered in the R/3 Customizing for Travel Planning under Master Data u2192 Control Parameters for Travel Planning u2192 Define sales offices and Define API access parameters.
External reservation system In the Travel Planning subcomponent Travel Management accesses an external reservation system connected to R/3 to carry out the queries on available travel services and to book the selected services. The reservation system currently available is the AMADEUS Global Travel Distribution system.
For more information, see Technical Prerequisites for Travel Planning--
Technical Prerequisites for Travel Planning
Before you can use Travel Planning fully, a number of internal R/3 and external prerequisites or settings must be fulfilled.
Connection to an External Reservation System
The online booking function in Travel Planning is based on the cooperation with external reservation systems that are used to communicate with the service providers. The R/3 user has access to the following functions via the connection to an external reservation system:
u2022 Availability query of travel services
u2022 Transfer of additional information about selected travel services
u2022 Price information
u2022 Processing of reservation by the respective provider
u2022 Synchronization of the data in SAP Travel Planning if external booking changes have been made
In the current release the external reservation system in use is AMADEUS Global Travel Distribution. AMADEUS is a subsidiary of Lufthansa, Air France, Continental Airlines and Iberia. The reservation system it provides is in worldwide use and 160,000 terminals in 37,000 travel agencies and ticket sales centers in over 130 countries are connected to it.
In order to carry out online booking via AMADEUS the following must have been carried out:
u2022 Your enterprise must have signed an agreement with AMADEUS for the use of the interface and be registered at AMADEUS with a user ID
u2022 A network connection to the AMADEUS computer center must have been opened
u2022 The identification code issued to the enterprise by AMADEUS must be entered in the R/3 Customizing for Travel Planning under Master Data u2192 Control Parameters for Travel Planning u2192 Define sales offices and Define API access parameters.
For questions about registration, contact the SAP & AMADEUS Competence Center:
SAP & AMADEUS Competence Center ACC 02 Neurottstrasse 16 69185 Walldorf Germany
Cheers
Mukta

Error occurred during initialization of VM. Could not reserve enough space

Dear All,
I am trying to install SAP NetWeaver 7.0 SR2 SP9 on Oracle 10.2 and platform is Windows 2003 32 bits. While installing, in t he restarting the JAVA Instance step, server0 node is getting shutdown. When I further analyzed dev_server0 log, I could get below useful information:
Error occurred during initialization of VM
Could not reserve enough space for object heap
[Thr 6008] JLaunchIAbortJava: abort hook is called
[Thr 6008] **********************************************************************
*** ERROR => The Java VM aborted unexpectedly.
*** Please see SAP Note 943602 , section 'Java VM crashes'
*** for additional information and trouble shooting.
[Thr 6008] JLaunchCloseProgram: good bye (exitcode = -2)
I referred the note mentioned above and it inturn referred to note# 940893. I followed many other sap notes also. However my above problem did not solve yet. I have checke my JAVA SDK version also. It is j2sdk1.4.2_11 and seems to be fine. My systems memory is 3 GB and I gave 20 GB as Virtual memory. I dont think that it should be a memory problem. However somewhere I am lost and can not get the grip over the problem to resolve it.
May I request all of you to kindly help me on above issue? Please let me know if you need any more information.
Waiting for your kind replies.
Regards,
Faisal

Dears,
Thank you very much for your replies. The heap size was 1024. I changed it to the below:
Heap Size=512 (earlier 1024)
Changed below paramters in configtool:
-Xmx512m (earlier 1024)
-Xms256m (earlier 1024)
Hope this information will be helpful to others as well.
Once again, I thank both of you to guide me in proper directions.
Regards,
Faisal

I want to reserve a static IP address on my Airport extreme. What is the difference between reserving by MAC Address and DHCP Client ID?

I want to understand the differences in the way you can reserve a static address for a device on the network. I had previously set the device itself to an address and then reserved it with DHCP Client ID, which I thought was just the devices static addresss. I'm not sure if this was in fact correct or just happend to work. I know what a MAC address is, but I'm not really sure what the DHCP Client ID is. So it would be great if someone could clarify it, and the difference between reserving address by MAC Address or DHCP Client ID.

A MAC address is a unique identification consisting of letters and numbers in a form that looks like this:
xx:xx:xx:xx:xx:xx
Every network device has a MAC address, which can be found on a label on the bottom or back of the device. Apple calls this the Ethernet ID.
A DHCP Client ID is an optional name that you can assign to a device. For example, on your Mac....
Open System Preferences (gear icon on the dock)
Open Network
Click on Ethernet
Click Advanced at the lower right
You may be able to edit the DHCP Client ID here....for example.....you could enter MJ500's MacBook in the space provided. That would be the Client ID of your Mac.

The site in the Spanish App Store I reserved the iPhone 5 and would like to get it to turn. But I was told that if I'm lucky - I will come with an email confirmation. Excuse me, I'd like to reserve an honest in turn, not to play the lottery for luck.

The site in the Spanish App Store I reserved the iPhone 5 and would like to get it to turn. But I was told that if I'm lucky - I will come with an email confirmation. Excuse me, I'd like to reserve an honest in turn, not to play the lottery for luck. I am disappointed by the work Apple

It sounds as if AT&T has already told you they can't do what you want. It doensn't sould like anything that's fixable on your end.

How to change Script path for Reserved.ReportViewerWebControl.axd when working behind reverse proxy?

Hi,
My application works behind a reverse proxy which has polices for secure and unsecure areas of the application. Architecture and Infra team is not willing to allow any root level policies in any case
When report viewer control is rendered on the page, it is adding a reference to the http handler Reserved.ReportViewerWebControl.axd in the script tag and the URL is at the root level. Unfortunately like other AjaxControlToolkit web resources I cannot modify
the URL to refer to the local script using ScriptManager.
Do we have any other property / means by which I can get this altered.
It is so unfortunate that the Microsoft.ReportViewer.WebForms assembly resources like scripts etc are not exposed as webresource at the assembly level and there is no way to modify this.
Does anyone has any solution to this?
Appreciate your help
Thanks in advance
Badal

Hi Badal,
Thank you for your question.
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Thanks,
Alisa Tang
If you have any feedback on our support, please click
here.
Alisa Tang
TechNet Community Support

Zune and reserved space problem

Hi all, I just started using lumia 710 and finding it a great, fun and highly efficient device. One minor problem I am getting is with zune and reserved storage space.
If I install a game/app in phone, the reserved space bar increases as expected. But the problem is that, even if I uninstall the game/app, the reserved space bar does not decrase, it stays the same as when the game/app was installed. so if i try out a few apps/ game and remove them later, i lose the equal amount of space from zune media storage. For example I tried out couple of xbox live titles and removed them later, net result --> my reserved space increased ~500mb while i lost 500mb from zune media free space.
if anyone can help me to sort this out, I will be very much grateful.
P.S. from phone i see i have ~ 3gb free space out of 6.28 gb. thanks

Additionaly, I have all my music files in User/Music & in Downloads. I also see my iTunes "Media Folder" is located in User/Music/iTunes and is 20GB...the size itunes says.

PP - No data in Field J_3ARESM (reserved qty) of 2lis_02_pabdsi(AFS based)

Hi,
I have loaded data for the AFS based datasource 2LIS_AF_PABDSI of PP. But there is no data in the field -
J_3ARESM(reserved quantity) - only showing 0,000. Used RSA3 transaction to extract data.
I checked it after filling up the setup tables. Data is present for all other fields.
Using MB25 transaction, when I give a particular production order - it has reservation data.
But, no data is present for Reservation Quantity in 2LIS_AF_PABDSI.
Thanks & Regards
Shine Sasimohanan
+91-9632674245

Hi
I think this standard datasource is not fit for this filed. J_3ARESM(reserved quantity) filed populate through J_3ABDSI this table try it once with z datsource mapping through
J_3ARESM- ZJ_3ARESM(AFS Fixed reserved quantity)
Hope its help.
By,
Praveen Yagnamurthy,
SAP BI Consultant,
Blue Marlin Systems-INDIA.
http://bluemarlinsys.com/bi

Reservations archving

Similar Messages

Maybe you are looking for