Reservations are not creating for a stock item PO

Hi All,
I have an issue with reservations for a stock material PO,
Our's is extended classic scenario(BBP 3.0 & R/3 4.7), I have created a cart and approved the cart for a stock materials.
As per business process, for a stock materials reservations are to be created but here after cart approval, under follow on documents tab, I am not getting any reservation details except shoopping cart number and its approval status.
Can any one have idea on it?
Through me some light,
Thanks in advance,
Govardhan,V.

Hi. Reservations are not supported in extended classic.
Or at least they were not when I last asked SAP about 3 years ago.
Unless something has changed the only solution was to use the BADI BBP_EXTLOCALPO_BADI to deactivate extended classic if it is an item you want a reservation for.
You would then end up using the classic scenario for these reservation items only.
Regards,
Dave.

Similar Messages

Call items are not created for Org BP's when created from Campaigns

Hello All,
We are creating Campaigns for Org BP's and pushing them to channel Phone, which is creating call list but call items are not created for Org BP's.
Org BP's are maintained with Contact Person's, callling hours and phone number are maintained against contact person BP, but still call items are not created with in call list.
Please let me know if I miss any further steps.
Thanks,
Raj.

Hi Debasis,
You can delete the PDS by using /SAPAPO/CULL_RTO_DEL - Delete Production Data Structure . And recif the it to APO. You can use CURTO_CREATE for it.
For the error message /SAPAPO/OM_ERROR2 119 there are couple of OSS notes please check the same.
1648558 - CIF error: 'Mode linkage problem with primary resource'
1325227 - PDS-EXP: Mode linkage problem with primary resource
Regards,
RBrahmankar

Purchase requisitions are not created for Component by MRP

Hi,
I have created planned orders for assy. When I run the MRP the purchase requisitions are not created by MRP for the components. If I check the planned order the components tab is showing all the raw materials list as per the BOM. The master data tab shows the BOM,Routing,Production version etc. But when I run the MRP the components planned orders/purchase requisitions are not created. There is no stocks available for the components in the plant, still the purchase requisition are not created by MRP.
I have tried in both transactions MD01 and MD02.
I could notice one thing. Supoose if I enter 31.12.2009 is the order finish date, the system creates exception mesage 10- Rescheduling in with proposed date 01.12.2009. Why the system is propsoing rescheduling in with date 01.12.2009 which past date.
Please sugest.
thanks and regards
Murugesan

Hi,
I am using MRP type PD for assy and components. There is no planned orders for assy.
If I run MD02 the planned orders created for assy and purchase requisition are created for raw materials. But if I run MRP in MD01 neither the planned orders nor the purchase requisitions created.
I tried the Control keys NETCH,NEUPL but still the planned order and purchase requisitions are not created if I run using MD01.
Please suggest.
thanks and regards
Murugesan

Profitability Segments are not created for Invoices

Hi Guru's
Can any one help on this ?
"Invoice Documents Profitability Segments are not created" can you please suggest me?
Thanks,
Aakash

Hi Aakash,
I think you are trying to integrate FICA with CO-PA and then getting the error.
The posting of a contract accounts A/R & A/P document in CO-PA is dependent on-
(a) Activation of the operating concern in the SPRO node Controlling → Profitability Analysis →
Structures → Define Operating Concern → Maintain Characteristics
and
(b) CO short account assignment of the contract in the SPRO Node Financial Accounting → Contract
Accounts Receivable and Payable → Basic Functions → Posting and Documents → Documents
→ Define Account Assignments for Automatic Postings → Store CO Short Account Assignments
for IS-U Contracts.
In here, the system only carries out the posting if the Profitability Segment Assigned selected in CO
account assignment.
Hope it helps...
Thanks,
Amlan

Profit center Document is not created for Balance sheet items

< MODERATOR: Message locked. Please post this message in the [Controlling forum|SAP ERP Financials - Controlling;. >
Dear all,
Profit center document is not created for balance sheet accounts , where i specified in 3KEH (default profit center for balance sheet a/c's) , i did n't do any changes , if i do any changes in dev , then i will transport to quality there is no pending requests
Same entry In quality environment profit center is updating and creating profit center document for balance sheet accounts . I compared with actual posting settings like Maintain Document Types and Define Number Ranges for Local Documents but it is same as development
regards
Govind
Edited by: Govind Yadav on Sep 24, 2008 8:33 PM

Is any body find the solution of this problem
I am also facing the same problem Profit center document is not getting created from any MM document
3KEH configuration is there but still the system not generating the Profit center document for those materials where there is no profit center assigned in the material master data and in 3KEH i have configured that it should post to dummy if there is no profit center in the material master data
Please tell me if some one have the solution to this problem
Bilal

Parameters are not created for M0001 feature

Hi Friends,
During Hiring activity in IT0002 after entering all the fields, while saving i got a warning message - parameters are not created in M0001 feature. Please give me your views & answers why i got this message.
Edited by: sharada vemula on Apr 4, 2010 11:31 AM

Hi,
Go to PE03 enter M0001
create a structure till Personal Area and enter **** unless you want to maintain Administrator group in here.
Hope this helps
Ajay

Profit center document not created for initial stock upload

Hi Gurus
We have created initial stock upload for one of the inventory items through movement type 561.Though the profit center was populated in the line items the profit center document has not been created and when we go and run balance sheet profit center wise there are no results for display? Any suggestions ?

Hello,
Check your 3KEH Settings
Check your OKB9 account determination
Make sure you have profit center number ranges in GB02
Regards,
Ravi

Business area not defaulted for tax line item

Hello Friends,
I am posting Customer invoice, when I simulate the invoice that time Output tax is automatically calculating the tax. My problem is, in the Output tax line item business area is required field which is appearing in display mode.
T code - OBXM. Here we will configure this and at the month end we will run the following transactions.
F.5D, F.5E.
I want to know step by step cinformation for this. If you have any documentation send it to [email protected]
Rams.N
Points will be assigned for the right answer

hi,
If you are using business area method then you want to create all sales tax GL with business area optional. And You create one GL like Tax clearing account(business area optional)and assign the same in OBXM against all the sales tax GLs.
Then you want to run F.5d and F.5e on everymonth.
govind.

Business area not determined for line item?

Hello All,
I am trying to create a sales order. When I enter a line item and enter plant for the item, it gives me an error "Business area not determined for the line item #" and it does not accept the item.
I have already checked in the enterprise structure in IMG that the business area is defined and assigned for this plant.
Is there anything else need to be done? Do we have to define or assign the business area in material master?
I would appreciate if somebody can answer.
Thanks.

There are three rules for determining a business area:
o   Rule 1: plant and division
o   Rule 2: for each sales area
o   Rule 3: for each plant and item division
See what you are missing

8dot3 filenames not created for Program Files and Program Files (x86)

Interesting issue we are realizing on Servers deployed from SCCM 2012. 8dot3names are not created for Program Files and Program Files (x86). they are created for other files/folders at the root of C and below Program Files and Program Files (x86). This is
causing issues when programs are installed and the path is then created with 8dot3 filenames for program files and program files (x86)

Arg. we just got bitten by this "feature", and it's affecting our security software stack (name starts with M and ends with ee), and some ancient crud too.
And found this, which suggests a logical reason for 8dot3name to not be present on servers, but, on clients, I think it's a rather gross assumption...
http://blogs.technet.com/b/josebda/archive/2012/11/13/windows-server-2012-file-server-tip-disable-8-3-naming-and-strip-those-short-names-too.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Item translations are not saved for copied page

Hello,
item translations are not saved for copied page. Is it expected?

Hello,
>> item translations are not saved for copied page. Is it expected?
I’m not sure what you mean by not saved, but if you expect to copy a current translated page into a new page, and inherent the translation in the new page, the answer is NO, it’s not saved.
Adding a new page to your application, even by copying an existing page, is a major change in your primary language application, which create multiple new independent elements in your application (after the page has been copied, there isn’t any link between it and the original page). You need to re-seed the primary application, export a new XLIFF file, and translate the new <trans-unit> that were added to it.
Regards,
Arie.
&diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
&diams; Forthcoming book about APEX: Oracle Application Express 3.2 – The Essentials and More

Line items are not appearing for some users

Hi
In one module pool program some line items are not appering for specific users. For Ex: Out of 5 line items user1 is able to see only 3 and user2 able to see all the line items. what might be the reason.
Regards
John.

Hi,
What do you mean by line items? Are you talking about screen fields in your module pool program or output of the program?
Please clarify your issue.
Regards,
RS

Every movie purchase through iTunes fails to transfer to my iPhone or iPad and the message I get is this: some of the items in the itunes library, including were not copied to the ipad because you are not authorized for them on this computer... help?

For a couple months now, every movie purchase through iTunes fails to transfer to my iPhone or iPad giving me the error: "some of the items in the iTunes library, including were not copied to the iPad because you are not authorized for them on this computer". I have read many forums about deleting, reinstalling, de-authorizing and authorizing my iMac through the iTunes store. Many suggestions don't work except to rename the movie to *.MP4 in Finder under the iTunes movie directory. I imagine this is a setting or a bug somewhere... any suggestions on how to bypass having to rename the files in Finder? My research into Google suggests this problem dates back to 2007 or so but it is now more prevalent than ever.
Thanks.

Try:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases

Change number that are not created earlier accepted for change of BOM

Hi,
When i am going to change BOM it gives warning message "Enter change number, BOM has history requirement"
But my problem is when i put any number in field of change number it is allowing me to change the BOM.
It should not be accept any number that are not created earlier in the system. It must have to accept change number that is created for the history requirement for perticular material. kindly give your input on this issue.
Atul

Hi Atul,
Please refer the thread ECM-Problem with Change number in CS01 and CS02 Transactions
Thanks,
Rakesh J

Inbound deliveries not created for Stock transfer process

Hi Every body
Inbound deliveries not created for Stock transfer process
We have Triggred Y458 output in Shipment VT02n and Output showing Green
But Inbound data not received in PO confirmation Tab
Any body help
Thanks in Advance
SAP MM

Manually processed

Reservations are not creating for a stock item PO

Similar Messages

Maybe you are looking for