Reservations not showing in MD04

Hello,
I have three reservations with movement type Transfer within plant 311 which is transferring stock from storage location A to B.
These three reservations do not show up in MD04 stock requirements screen but show up in Transaction MB25(Reservation list Inventory Management) as open reservations.
I have checked that both the storage locations are not excluded from MRP through MMSC and in "Define storage location MRP per plant"
Can you please help me out with this issue?
Sincerely,
Puja

HI
As Vivek said  transfer requirements b/n Sloc's are seen in MD04 only if the Sloc is excluded or planned seperately i.e. have 1 or 2 in MRP-4 view for Sloc MRP indicator as it is deducted from one storage location and add to the second one.in such case
as i have same scenarion and in MD04 it is showing.
check in MMBE
Regards
Anupam Sharma

Similar Messages

  • Sales Order number is  not showing in MD04

    Hi Gurus  ,
    I have got one case where  Sales order number is not showing  in MD04 screen  . This sales order , line item  has already delivered , PGI &  billing document also been generated  . Moreover accounting document is also been created .As cheeked & found that it is not shwoing in MD04 screen  because at  the time sales order creation  availability check “01” was maintained  which has sum up all the  requirement in one  particular day ( Also as
    per SAP note -70408) .
    Now because  all the subsequent document has been generated  for sales order so we can not mark it for “Rejection for rejection “  & to create new  sales order  with  availability check “02” in material master .
    Please let  me know the possible solution for the same or  if any  sap note would  be required to get the sales order number in MD04  .
    Thanks  ,
    Aman

    Hi Kiran ,
    Actually  before running the  report in “SDRQCR21”  in PRD I wanted to  run it in “Quality “ .
    In quality I am not able to simulate the same  .
    Please refer below points related to my testing result .
    1.Mainatined availability check group “01” .
    2 . Created Sales order 
    3. Check in MD04 screen & as expected  sales order  was coming blank  with negative Qty .
    4. Run the MRP which generated PR
    5. PR converted to PO  & GRN was done which updated the stock
    6. Created delivery  & checked the same in MD04  . It was also coming blank  . No delivery  document  numbe was showing in screen  but  it was coming with negative  Qty .
    7. Done the PGI  & blank  delivery document number  was removed & it become  normal .
    In PRD .
    There are 3 sales order
    One sales order is already marked reason for rejection & two sales order delivery , PGI has been done  .
    But still it is showing  blank sales order with negative Qty  & after MRP run it is generating the PR also  .
    I don't why it was  showing with negative values  .
    Please refer attacehed screen shot  .
    Thanks,
    Regards ,
    Aman

  • PIR visible in MD63 but not showing in MD04

    Hi,
    I have transferred SOP plan to demand management through mass processing...requirements are visible in md63 but they are not showing in MD04..
    Thanks
    Kumar

    Dear Kumar,
    The PIR is maintained for the version GP,which is not active,as suggested either you should maintain
    the PIR for this version as active or else  for the version 00(SAP standard).
    Regards
    Mangalraj.S

  • Schedule agreement not showing in MD04

    Hi All
    We have a schedule agreement created and its not reflecting in MD04. According to the thread i changed the avl check to 02.
    But its still not showing in MD04. So my question is do I have to do any other thing so that the avl chk change will get affected for same schedule agrmnt or I have to create a new one so that it will show in MD04.
    Thank You.

    First you need to identify what schedule line category is flowing in your sale order.  Normally, this would be CP.  So next go to VOV6, select the schedule line category and execute.  There tick the box for "Req./Assembly"
    thanks
    G. Lakshmipathi

  • PIR not showing in Md04 after certain date

    Hi
    The PIR's are coming from LTP.
    The PIR's which are created after 03/2015 are not showing in MD04
    MRP run back ground with NETCH still why PIR's are not showing?
    What settings I have to check..
    Regards,
    Srihari.M

    Please check the following  :
    1.If you have done splitting of the required qty during PIR creation . , please check in MD62  whether , you have un-checked the Active Version for some of them  .If those qty. are falling after 03/2015  , then it will not pop up in MD04
    2.While creation of PIR , if the planning period is beyond planning horizon , it will flag you a message and requirement will not display in MD04 , then check the same in OMPD and compare with planning period.
    Regards
    JH

  • PO not showing in MD04

    Hi
    I created PR to PO. Po created with account assignment category c-sales order and item category s-third party. My question is PO or PR not showing in MD04.
    Please can anybody suggest?

    Hi,
    Please check whether your PO and PR really exist for the plant, material you are speaking about.
    You can check in VA03 in document flow whether the mentioned PR, PO really exists.
    If it is so, you should see both PR and PO on MRP list. Start MD04 again > please check whether you gave proper material, plant, MRP area in MD04 > click on refresh button.
    Please check organisational levels (used in MD04 and used in your PR/PO)! Please also check whether there's deletion indicator on the PO / PR.
    Can this help?
    BR
    Csaba
    Edited by: Csaba Szommer on Jul 22, 2008 2:12 PM
    Edited by: Csaba Szommer on Jul 22, 2008 2:13 PM

  • Demand for Partial Schedule line not showing in MD04?

    Hi All,
    An SO with around 1200 line items, having problem with one line item, ordered qty is 20. Shipped a partial line of 6qty.Schedule line was showing order qty of 20, confirmed qty 6 but no second schedule line for the balance of 14 and the demand for the open qty 14 is not reflected in MD04. Tried manually and also manually running MRP for the item but neitger created a second line or triggered the demand to show in MD04.
    Thanks in Advance.
    Thankyou and Regards
    Hatti.

    Try creating the schedule line in the order and then running MRP for the demand to show in your stock requirements.

  • Manual Reorder point planning stock is not showing in MD04

    HI,
       Would any one help me when i plan for reorder point planing the details furnished below.
    Mrp type: V1
    Lot size :HB
    ROP : 30
    Max stock level :1000
    in Material master settings.But when i run the MRP using MD03 system is not showing available stock in MD04.It is showing 0 stock rather it would show 4 (MMBE un restricted stock..)
    What are thesettings required or any thing missing in IMG. Please help me in this.
    Regards,
    Srini

    Srini,
    You may also want to check if the Unrestricted stock is in a storage location that is excluded from MRP.
    On MD04 you will then see a separate line item at storage location & the Qty =4 should appear as shown below.
    12/02/2009     Unrest Stock                                                       12           12      
    12/02/2009     SLocSt     QANN StLoc: not plnd          0           8     QANN
    12/02/2009     SLocSt     VEND StLoc: not plnd          0           0      VEND
    Hope this helps. Good lcuk.
    thanks,
    Ramm

  • Ordered item is not showing in MD04

    Hello SAP Gurus,
    My requirement is like one material is in the sales order but dose not show as ordered in MD04.
    Could someone please help me on this.
    Thanks
    Sha

    Go to your sales order and note the schedule line category of the line item which you want to check
    In t code VOV6 for the schedule line category there is a check box for transfer of requirements near to Availabilty check tick box, If you tick that then this order for this line item will appear in MD04

  • Customer Order Qty not showing in MD04

    Dear Sir,
    Customer has booked an order for 5000 Nos of one FG. The Order is very much active. But when we see in MD04, Requirement Qty is showing (-)5000 but there is no qty coming in available qty column. Practically it should be (-)5000, as plant stock is zero. Due to this error, planned order is not coming on planning run.
    I believe some thing missing in material master. As other material booked against same sales order is coming in MD04.
    Can anybody help me. Full points for helping answers.
    GR

    Hi,
    I think you should do what was told you by Ganesh. If planning strategy is e.g. 10, 11 the SO has only informative role, no PldOrd will be generated for it - this is MTS environment.
    If planning strategy is 40 you may have PldOrd for SO based on IndReq qty&date.
    In MTO environment you should 'always' get PldOrd for SO.
    BR
    Csaba
    Edited by: Csaba Szommer on Jul 23, 2008 2:21 PM

  • Reservation not visible in MD04 but visible in MMBE

    Hi Everyone,
    I am facing a problem . Reservations of materials are visible in the Tcode MMBE but those reservations are not visible in Tcode MD04.
    Please help me in this
    Thanks
    Bijay Prasad

    Dear ,
    In SAP Txn : MD04-there is always theree entreis : Plant /Material  and With Filter Check box.If you hit the With Filter Check box , u will find Display Filter and Selection Rule is appearing as a menu bar .
    Now , for a test case , provide one material and plant code , mark with filter , Select  only SAP Requiremet and Stock both Display Filter and Selection Rule , press entre ,MD04 will display Stocks as well all the Reservation Number as Ord.Reservation (both manullay generated or automatically generted) .
    In case , if it is not displaying , then investigate goto -SPRO-MRP-Evalution -Filter -Define Selection Rule -Select the SAP00002
    -SAP Requirement and Stocks -Goto Details -Check wether Reservation is set to "Do not consider " .It should be set in " Display availability relevence " .Other filter screen like SAP00001-only for Reciepts .
    Check this and come back
    Regards
    JH

  • Reservation not appearing in MD04

    Hi Expert,
    I had created a reservation and it cant show out in the MD04 screen, may  I know what could be the possible problem for that?
    Thanks.

    HI,
    Reservations are stocks that are reserved for a usage example production Issue when you release the production order reservationa are created for components, manual reservations also can be created if you want to allocate some stock for a particular use. Tcode for reservations
    Create Reservation MB21
    Change Reservation MB22
    Display Reservation MB23
    List of Reservations MB25
    If reservations are more than the UR stock still movements can be posted and in MD04 u can see the actual situation. if you run te MRP for that material if the reservationa are more than the URUS then mrp will create the PR.
    In MMBE choose the stock and click --Environment -->reservations you can see all the reservation details ie for which production order this materials reservations are created.
    Hope clears to you.
    Regards,
    R.Brahmankar

  • Secure boot not working with MSI Z77a-G45 And system reserve not showing

    Ok so i re did my windows after i did a zero fill on my hard drive as it was showing a corrupted sector on my disk that seemed to fix it for now, until it comes back if it does crossing my fingers it gone for good. But now i can't seem to get Secure boot to work i mean i did not have it before as i just slapped the motherboard in with a existing windows, that was to be expected but this is a clean install of windows 8.1 and i even have secure boot on but its not working and reports as off in windows.  Is it because i have my bios set to legacy+UEFI??? would that make secure boot not work??. i even went as far as turning it off and back on again the secure boot setting nothing made a difference.  I mean its not a big deal bit would be nice to know why its not working, also another wired thing and i will post pictures of it, as i cant see my system reserved partition in disk management but diskpart says it there, i will post those pictures any ideas??. 

    fixed it is my legacy+uefi another forum got back to me.

  • Sales orders not showing on MD04

    Hi Gurus,
    Last week we had copied production environment into quality system. Now when the users are creating sales orders in Q system, they are not able to see the sales orders in MD04? What is the reason for this?
    Thanks
    Anusha

    Go to your sales order and note the schedule line category of the line item which you want to check
    In t code VOV6 for the schedule line category there is a check box for transfer of requirements near to Availabilty check tick box
    If you tick that then this order for this line item will appear in MD04
    Check :
    MD04 - Configuration Points
    http://sap.ittoolbox.com/groups/technical-functional/sap-log-pp/md04-issue-sales-orders-2584812

  • Demand not showing on md04

    Hi All,
            I am in a critical situation , so could you please guide me to solve this issue will be grateful.
    My issue is
    Sales orders  are creating a planned orders for Top level materials [Material A] but it's not creating a requirements for low level item [Material B].
    Low level item is buy part so , I am looking for PR needs to be created after MRP, but in MD04 nothing is visible.
    So please help how to get the demand on MD04  for low level items.
    Thanks in Advance.

    Hello Madhan,
    Please check with below points.
    1.MRP type of low level material = PD
    2. Stock of low level material
    3.BOM validity of Low level material.
    5.Any Exception message for Header material planned order
    6.Is it Multi level planning (Md01 or MD02)
    Regards
    Pradeep

Maybe you are looking for

  • My key bord changed its settings only on the inter net it has been set to french how do i fix this?

    my keyboard has been changed only for the inter net to french standard how do i change it back to American standard English? == This happened == Just once or twice == today 08 05 2010

  • Link between sd and pp

    hi all,   i have a problem regarding relation or link between sales and production order. i have to fetch production order number related to sales order number. i have checked in the table AFPO that is production order item table , there is field AFP

  • Change System Status of SO item dynamically based on Reason for Rejection

    Hi ppl, Our SAP user has raised a requirement as described below: In sales order (in creation mode (VA01) or change mode (VA02)), if at the item level, the reason for rejection is mentioned, then the system status for that item should be automaticall

  • Error in adapter configuration

    Hi folks, I get an error saying: Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Consisten

  • IDVD6 and 3rd party DVD burners

    I purchased iLife for the ability to burn to a 3rd party DVD burner with iDVD6. I can't for the life of me figure how to burn to the 3rd party burner. Please help. imac G4   Mac OS X (10.3.9)