Reserve Summary Report Performance
We were running the Reserve Summary Report for all the FA books till aug-03 without any problem. In Sep-03, there was a performance issue for the US BOOK and Running Gather Schema Statistics for FA resolved the problem. From OCt-03, the report has been running endlessly for the US book. Running it from the command line takes only 15 minutes for the report to complete.
The problem did not occur for any other FA books. Anyone can think of anything? Any tip to see if there is any data issue?
Hi;
Please see:
Reserve Summary and Reserve Detail Reports [ID 171792.1]
Regard
Helios
Similar Messages
-
hi
i am doing stock summary report
i am checking the data with mc.9 standard report
the total amount for particular month is not tallying with standard one.
data is coming with all the materials and with opening nd closing balances...
but it is taking the stock amount with inclusive of all taxes. i am using the field mseg-dmbtr.
but i need the material stock amount without taxes.
i tried with mbew table, but i didn't get closing stock amount.
values is there correct value in mbew but i am not able to get the correct value..
tell me anyother tables or give me any soln....
thanks nd regards
vidyaGo through this......
*& Report Z_OPEN_CLOSE *
REPORT Z_OPEN_CLOSE MESSAGE-ID YW2 LINE-SIZE 231 LINE-COUNT 45
NO STANDARD PAGE HEADING.
Type Declaration *
TYPE-POOLS SLIS.
Tables *
TABLES: MKPF, " Material Document: Header Data
MSEG, " Material Document: Item Data
MARA,
MARD,
S031,
EKKO,
EKPO,
LIKP,
MAKT,
J_1IWRKCUS,
T001W,
WB2_V_MKPF_MSEG2,
MMIM_REP_PRINT,
YW2_STKMOVEMENTS,
YPLNT,
MARDH.
Internal Tables *
DATA: I_WERKS LIKE J_1IWRKCUS OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF I_YPLNT OCCURS 0,
PPLNT LIKE YPLNT-PPLNT,
WPLNT LIKE YPLNT-WPLNT,
END OF I_YPLNT.
DATA: BEGIN OF I_MKPF OCCURS 0,
MBLNR LIKE MKPF-MBLNR,
MJAHR LIKE MKPF-MJAHR,
BUDAT LIKE MKPF-BUDAT,
VGART LIKE MKPF-VGART,
BWART LIKE MSEG-BWART,
MATNR LIKE MSEG-MATNR,
WERKS LIKE MSEG-WERKS,
LGORT LIKE MSEG-LGORT,
MENGE LIKE MSEG-MENGE,
MEINS LIKE MSEG-MEINS,
KUNNR LIKE MSEG-KUNNR,
ZEILE LIKE MSEG-ZEILE,
XAUTO LIKE MSEG-XAUTO,
SHKZG LIKE MSEG-SHKZG,
MATNR1 LIKE MSEG-MATNR,
END OF I_MKPF.
DATA: BEGIN OF I_MARDH OCCURS 0,
WERKS LIKE MARDH-WERKS,
MEINS LIKE MARA-MEINS,
MATNR LIKE MARDH-MATNR,
LGORT LIKE MARDH-LGORT,
LABST LIKE MARDH-LABST,
LFGJA LIKE MARDH-LFGJA, "Added -MB
LFMON LIKE MARDH-LFMON, "Added -MB
PERIO(6),
INSME LIKE MARDH-LABST,
EINME LIKE MARDH-LABST,
SPEME LIKE MARDH-LABST,
RETME LIKE MARDH-LABST,
O_STK LIKE MARDH-LABST, " Opening Stock
C_STK LIKE MARDH-LABST, " Closing Stock
END OF I_MARDH.
DATA: BEGIN OF I_MARD OCCURS 0,
WERKS LIKE MARD-WERKS,
MATNR LIKE MARD-MATNR,
LGORT LIKE MARD-LGORT,
LABST LIKE MARD-LABST,
INSME LIKE MARD-LABST,
MEINS LIKE MARA-MEINS,
EINME LIKE MARD-LABST,
SPEME LIKE MARD-LABST,
RETME LIKE MARD-LABST,
END OF I_MARD.
DATA: I_MARD1 LIKE I_MARD OCCURS 0 WITH HEADER LINE.
DATA: I_MARDH1 LIKE I_MARDH OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF I_MKPF1 OCCURS 0,
MBLNR LIKE MKPF-MBLNR,
WERKS LIKE MSEG-WERKS,
MATNR LIKE MSEG-MATNR,
BUDAT LIKE MKPF-BUDAT,
BWART LIKE MSEG-BWART,
MJAHR LIKE MKPF-MJAHR,
VGART LIKE MKPF-VGART,
LGORT LIKE MSEG-LGORT,
MENGE LIKE MSEG-MENGE,
MEINS LIKE MSEG-MEINS,
XAUTO LIKE MSEG-XAUTO,
SHKZG LIKE MSEG-SHKZG,
END OF I_MKPF1.
DATA: BEGIN OF I_MKPF2 OCCURS 0,
WERKS LIKE MSEG-WERKS,
MATNR LIKE MSEG-MATNR,
BUDAT LIKE MKPF-BUDAT,
BWART LIKE MSEG-BWART,
MJAHR LIKE MKPF-MJAHR,
VGART LIKE MKPF-VGART,
LGORT LIKE MSEG-LGORT,
MENGE LIKE MSEG-MENGE,
MEINS LIKE MSEG-MEINS,
XAUTO LIKE MSEG-XAUTO,
END OF I_MKPF2.
DATA: BEGIN OF I_FINAL5 OCCURS 0,
WERKS LIKE MSEG-WERKS, " Plant
MATNR LIKE MSEG-MATNR, " Material
LGORT LIKE MSEG-LGORT, " Storage Location
BUDAT LIKE MKPF-BUDAT, " Posting Date
MTART LIKE MARA-MTART, " Material Type
SPMON LIKE S031-SPMON, " Month
MAKTX LIKE MAKT-MAKTX, " Description
meins(3), " UOM
MEINS LIKE MSEG-MEINS,
O_STK LIKE MARDH-LABST, " opening stock
TRECEP LIKE MARDH-LABST, " total receipts
PRODU LIKE MARDH-LABST, " Net Receipts - Production
RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
TDISP LIKE MARDH-LABST, " total dispatches
CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
TLOSS LIKE MARDH-LABST, " Total Loss
TRLOSS LIKE MARDH-LABST, " Transit Loss
WHLOSS LIKE MARDH-LABST, " Warehouse Loss
C_STK LIKE MARDH-LABST, " Closing Stock
TRFSTK LIKE MARDH-LABST, "Transfer stock
MENGE LIKE MSEG-MENGE,
OTHADJ LIKE MARDH-LABST,
END OF I_FINAL5.
DATA: BEGIN OF I_FINAL OCCURS 0,
WERKS LIKE MSEG-WERKS, " Plant
MATNR LIKE MSEG-MATNR, " Material
BUDAT LIKE MKPF-BUDAT, " Posting Date
MTART LIKE MARA-MTART, " Material Type
SPMON LIKE S031-SPMON, " Month
MAKTX LIKE MAKT-MAKTX, " Description
meins(3), " UOM
MEINS LIKE MSEG-MEINS,
O_STK LIKE MARDH-LABST, " opening stock
TRECEP LIKE MARDH-LABST, " total receipts
PRODU LIKE MARDH-LABST, " Net Receipts - Production
RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
TDISP LIKE MARDH-LABST, " total dispatches
CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
TRFSTK LIKE MARDH-LABST, "Material Transfer stock
TRLOSS LIKE MARDH-LABST, " Transit Loss
WHLOSS LIKE MARDH-LABST, " Warehouse Loss
TLOSS LIKE MARDH-LABST, " Total Loss
C_STK LIKE MARDH-LABST, " Closing Stock
OTHADJ LIKE MARDH-LABST,
END OF I_FINAL.
DATA: I_FINAL1 LIKE I_FINAL OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF I_FINAL_TEMP OCCURS 0,
WERKS LIKE MSEG-WERKS, " Plant
MATNR LIKE MSEG-MATNR, " Material
MTART LIKE MARA-MTART, " Material Type
MAKTX LIKE MAKT-MAKTX, " Description
MEINS LIKE MSEG-MEINS,
O_STK LIKE MARDH-LABST, " opening stock
TRECEP LIKE MARDH-LABST, " total receipts
PRODU LIKE MARDH-LABST, " Net Receipts - Production
RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
TDISP LIKE MARDH-LABST, " total dispatches
CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
TRFSTK LIKE MARDH-LABST, "Material Transfer stock
TRLOSS LIKE MARDH-LABST, " Transit Loss
WHLOSS LIKE MARDH-LABST, " Warehouse Loss
TLOSS LIKE MARDH-LABST, " Total Loss
C_STK LIKE MARDH-LABST, " Closing Stock
OTHADJ LIKE MARDH-LABST,
END OF I_FINAL_TEMP.
For Materials
DATA: BEGIN OF I_MARA OCCURS 0,
MATNR TYPE MARA-MATNR,
MTART TYPE MARA-MTART,
MEINS LIKE MARA-MEINS,
LABST TYPE MARD-LABST,
MAKTX LIKE MAKT-MAKTX,
END OF I_MARA.
DATA: BEGIN OF I_STKMVMNTS OCCURS 0,
BWART LIKE MSEG-BWART,
SHKZG LIKE MSEG-SHKZG,
VZBEW LIKE YW2_STKMOVEMENTS-VZBEW,
END OF I_STKMVMNTS.
DATA: BEGIN OF I_FINALT OCCURS 0,
WERKS LIKE MSEG-WERKS, " Plant
MATNR LIKE MSEG-MATNR, " Material
BUDAT LIKE MKPF-BUDAT, " Posting Date
MTART LIKE MARA-MTART, " Material Type
SPMON LIKE S031-SPMON, " Month
MAKTX LIKE MAKT-MAKTX, " Description
meins(3), " UOM
MEINS LIKE MSEG-MEINS,
O_STK LIKE MARDH-LABST, " opening stock
TRECEP LIKE MARDH-LABST, " total receipts
PRODU LIKE MARDH-LABST, " Net Receipts - Production
RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
TDISP LIKE MARDH-LABST, " total dispatches
CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
TRFSTK LIKE MARDH-LABST, "Material Transfer stock
TRLOSS LIKE MARDH-LABST, " Transit Loss
WHLOSS LIKE MARDH-LABST, " Warehouse Loss
TLOSS LIKE MARDH-LABST, " Total Loss
C_STK LIKE MARDH-LABST, " Closing Stock
OTHADJ LIKE MARDH-LABST,
MONTH(8) ,
END OF I_FINALT.
DATA: IMKPFT LIKE I_MKPF OCCURS 0 WITH HEADER LINE.
DATA: IMKPFT1 LIKE I_MKPF1 OCCURS 0 WITH HEADER LINE.
DATA: IMARDT LIKE I_MARD OCCURS 0 WITH HEADER LINE.
DATA: IMARDHT LIKE I_MARDH OCCURS 0 WITH HEADER LINE.
DATA: T_FINAL LIKE I_MKPF OCCURS 0 WITH HEADER LINE.
DATA: IMKPFT2 LIKE I_MKPF OCCURS 0 WITH HEADER LINE.
FCAT is used for the field catalog
DATA: FCAT TYPE TABLE OF SLIS_FIELDCAT_ALV WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
for excluding the ICONs from the application toolbar
FEXC TYPE TABLE OF SLIS_EXTAB WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
FS_LAYO is used for Grid Layout
FS_LAYO TYPE SLIS_LAYOUT_ALV,
FEVENTS to handle the events TOP OF PAGE & USER_COMMAND
FEVENTS TYPE TABLE OF SLIS_ALV_EVENT WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
FHEADER is used for List header
FHEADER TYPE TABLE OF SLIS_LISTHEADER WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
sort is used for sorting
FSORT TYPE TABLE OF SLIS_SORTINFO_ALV WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
FCAT1 TYPE TABLE OF SLIS_FIELDCAT_ALV WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
FS_LAYO1 TYPE SLIS_LAYOUT_ALV,
GT_LIST_TOP_OF_PAGE1 TYPE SLIS_T_LISTHEADER,
FEVENTS1 TYPE TABLE OF SLIS_ALV_EVENT WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
FHEADER1 TYPE TABLE OF SLIS_LISTHEADER WITH NON-UNIQUE DEFAULT
KEY WITH HEADER LINE INITIAL SIZE 0,
G_STATU_071 TYPE SLIS_FORMNAME VALUE 'Z_PFSTATUS',
ALV_VARIANT1 LIKE DISVARIANT.
Variable Declaration *
TYPES: TRFF_TYPE_DEC_6_5(6) TYPE P DECIMALS 5.
DATA: FYEAR(4),
MON(2),
FYEAR1(4),
MON1(2),
OBAL LIKE MARD-LABST,
CBAL LIKE MARD-LABST,
INDEX TYPE I,
COUNT,
COUNT1 TYPE I,
O_STK TYPE P DECIMALS 3,
C_STK TYPE P DECIMALS 3,
V_MJAHR LIKE MKPF-MJAHR,
MONTHS TYPE TRFF_TYPE_DEC_6_5,
MONTH TYPE I.
Global variables for handling ALV functionality
DATA: ALV_KEYINFO TYPE SLIS_KEYINFO_ALV,
ALV_VARIANT LIKE DISVARIANT,
ALV_LAYOUT TYPE SLIS_LAYOUT_ALV,
ALV_REPID LIKE SY-REPID,
ALV_PRINT TYPE SLIS_PRINT_ALV,
ALV_DETAIL_FUNC(30),
ALV_DEFAULT_VARIANT LIKE DISVARIANT-VARIANT,
ALV_COLOURIZE_FIELDS LIKE MMIM_REP_PRINT-COLOR.
RANGES: R_BUDAT FOR MKPF-BUDAT.
*Added by Prabhu for year on 26.4.05.
DATA: IDATE LIKE R_BUDAT OCCURS 0 WITH HEADER LINE.
Selection Screen Elements *
SELECTION-SCREEN BEGIN OF BLOCK BLK WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: S_WERKS FOR MARD-WERKS OBLIGATORY NO INTERVALS.
PARAMETER: P_SPMON LIKE S031-SPMON NO-DISPLAY .
SELECT-OPTIONS: S_MATNR FOR MARA-MATNR OBLIGATORY,
S_LGORT FOR MSEG-LGORT NO-EXTENSION NO INTERVALS,
S_MBLNR FOR MKPF-MBLNR,
S_BUDAT FOR MKPF-BUDAT OBLIGATORY .
SELECTION-SCREEN END OF BLOCK BLK.
SELECTION-SCREEN BEGIN OF BLOCK BLK3 WITH FRAME TITLE TEXT-004.
PARAMETER : MTART LIKE MARA-MTART DEFAULT 'FERT' NO-DISPLAY.
SELECTION-SCREEN END OF BLOCK BLK3.
SELECTION-SCREEN BEGIN OF BLOCK BLK2 WITH FRAME TITLE TEXT-003.
SELECTION-SCREEN END OF BLOCK BLK2.
ADDED BY PRABHU FOR DAY-WISE REPORT.
SELECTION-SCREEN BEGIN OF BLOCK B3 WITH FRAME TITLE TEXT-007.
PARAMETERS: D1 RADIOBUTTON GROUP P1 DEFAULT 'X',
M1 RADIOBUTTON GROUP P1,
Y1 RADIOBUTTON GROUP P1.
SELECTION-SCREEN END OF BLOCK B3.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-006.
PARAMETERS: ALV_DEF LIKE DISVARIANT-VARIANT.
SELECTION-SCREEN END OF BLOCK B2.
DATA: S_BUDAT1 LIKE S_BUDAT OCCURS 0 WITH HEADER LINE."prabhu
Initialization *
INITIALIZATION.
PERFORM ALV_INIT.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR ALV_DEF.
PERFORM ALV_F4.
At Selection Screen
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_spmon.
PERFORM monat_f4.
At Selection Screen *
AT SELECTION-SCREEN.
checking for the layout
PERFORM ALV_CHECK.
authorisation check for the Plant
PERFORM auth_check.
Validation for the Plant
PERFORM VALIDITY_CHECK.
IF MTART NE 'FERT'.
MESSAGE E041 WITH 'Material Type must be FERT Only...'.
ENDIF.
IF D1 = 'X'." On 26.4.05.
P_SPMON0(4) = S_BUDAT-LOW0(4).
P_SPMON4(2) = S_BUDAT-LOW4(2).
ELSE.
P_SPMON0(4) = S_BUDAT-LOW0(4).
P_SPMON4(2) = S_BUDAT-LOW4(2).
ENDIF.
LOOP AT S_BUDAT.
IF S_BUDAT-HIGH IS INITIAL.
S_BUDAT-HIGH = S_BUDAT-LOW.
MODIFY S_BUDAT.
ENDIF.
ENDLOOP.
IDATE-LOW = S_BUDAT-LOW.
IDATE-HIGH = S_BUDAT-HIGH.
CALL FUNCTION 'FIMA_DAYS_AND_MONTHS_AND_YEARS'
EXPORTING
I_DATE_FROM = IDATE-LOW
I_DATE_TO = IDATE-HIGH
IMPORTING
E_DAYS =
E_MONTHS = MONTH
E_YEARS =
DATA: I(3) TYPE C.
I = S_BUDAT-LOW+4(2).
CLEAR: R_BUDAT.
REFRESH: R_BUDAT.
*added by Prabhu for Only for Oneday.on 18.5.5
IF MONTH EQ '0'.
MONTH = MONTH + 1.
ENDIF.
*added by Prabhu for Only for Oneday.on 18.5.5
DO MONTH TIMES.
R_BUDAT-LOW = S_BUDAT-LOW.
APPEND R_BUDAT.
ENDDO.
I = 0.
LOOP AT R_BUDAT.
R_BUDAT-LOW4(2) = S_BUDAT-LOW4(2) + I.
I = I + 1.
R_BUDAT-LOW+6(2) = '01'.
MODIFY R_BUDAT.
ENDLOOP.
LOOP AT R_BUDAT.
CALL FUNCTION 'RP_LAST_DAY_OF_MONTHS'
EXPORTING
DAY_IN = R_BUDAT-LOW
IMPORTING
LAST_DAY_OF_MONTH = R_BUDAT-HIGH
EXCEPTIONS
DAY_IN_NO_DATE = 1
OTHERS = 2
MODIFY R_BUDAT.
ENDLOOP.
LOOP AT R_BUDAT.
IF R_BUDAT-LOW4(2) = S_BUDAT-LOW4(2).
R_BUDAT-LOW = S_BUDAT-LOW.
MODIFY R_BUDAT.
ENDIF.
IF R_BUDAT-HIGH4(2) = S_BUDAT-HIGH4(2).
R_BUDAT-HIGH = S_BUDAT-HIGH.
MODIFY R_BUDAT.
ENDIF.
For Summary on 26.4.05.
IF Y1 = 'X'.
CLEAR R_BUDAT.
REFRESH R_BUDAT.
R_BUDAT-LOW = S_BUDAT-LOW.
R_BUDAT-HIGH = S_BUDAT-HIGH.
APPEND R_BUDAT.
CLEAR R_BUDAT.
ENDIF.
ENDLOOP.
At Selection Screen *
AT SELECTION-SCREEN OUTPUT.
Start of Selection *
START-OF-SELECTION.
V_MJAHR = P_SPMON+0(4).
Get plant distinction warehouse/production
PERFORM GET_PLANT_DISTINCTION.
Collect the data from various tables
PERFORM GETDATA_FG_STOCK.
here the number of rows in the output table is found
PERFORM OUTPUT_TABLE_CHECK.
here the top of the page code is written, that is to be displayed
in the output
PERFORM Z_TOP_OF_PAGE.
here ALV layout properties are set
PERFORM Z_LAYOUT_SETTINGS.
ALV EVENTS for TOP OF PAGE and for USER COMMAND
PERFORM Z_ALV_EVENTS.
The field catalog is defined for the Primary List is defined in
the subroutine CREATE_FIELD_CATALOG include program ZPRRDOCR_FCAT
PERFORM Z_CREATE_FIELD_CATALOG.
This is for displaying the output
PERFORM Z_REUSE_ALV_GRID_DISPLAY.
*& Form getdata_fg_stock
Getting data from standard tables
FORM GETDATA_FG_STOCK.
For getting the Start date & end date of the month
PERFORM get_month_dates.
Getting the Opening Stock from MARDH table
IF MON EQ '01'.
MON1 = MON.
FYEAR1 = FYEAR.
MON = '12'.
FYEAR = FYEAR - 1.
ELSE.
MON1 = MON.
FYEAR1 = FYEAR.
MON = MON - 1.
FYEAR = FYEAR.
ENDIF.
PERFORM GET_RECORDS_FROM_DB.
*added for Month Summary on 26.4.05.
LOOP AT R_BUDAT.
S_BUDAT-LOW = R_BUDAT-LOW.
S_BUDAT-HIGH = R_BUDAT-HIGH.
*for Month
P_SPMON0(4) = S_BUDAT-LOW0(4).
P_SPMON4(2) = S_BUDAT-LOW4(2).
*for summary.
IF Y1 = 'X'.
LOOP AT S_BUDAT.
S_BUDAT1-SIGN = 'I'.
S_BUDAT1-OPTION = 'NB'.
S_BUDAT1-LOW = S_BUDAT-LOW.
S_BUDAT1-HIGH = S_BUDAT-HIGH.
APPEND S_BUDAT1.
CLEAR S_BUDAT1.
ENDLOOP.
ENDIF.
IMKPFT[] = I_MKPF[].
IMKPFT2[] = I_MKPF[].
IMARDT[] = I_MARD[].
IMARDHT[] = I_MARDH[].
PERFORM MONTH_WISE.
PERFORM PROCESS_MOVEMENTS.
PERFORM CALCULATE_OPENING_STOCK.
PERFORM UPDATE_NON_TRANSACTION_ITMS.
PERFORM DELETE_EMPTY_RECORDS.
CLEAR: IMARDHT,IMARDT,IMKPFT1,IMKPFT,I_FINAL,I_FINAL5.
REFRESH: IMARDHT,IMARDT,IMKPFT1,I_FINAL,I_FINAL5,IMKPFT.
ENDLOOP.
CLEAR: R_BUDAT.
REFRESH: R_BUDAT.
*end of changes for month.
ENDFORM. " getdata_fg_stock
FORM MONAT_F4 *
F4-Hilfe für Monat *
FORM MONAT_F4.
DATA: BEGIN OF MF_DYNPFIELDS OCCURS 1.
INCLUDE STRUCTURE DYNPREAD.
DATA: END OF MF_DYNPFIELDS.
DATA: MF_RETURNCODE LIKE SY-SUBRC,
MF_MONAT LIKE ISELLIST-MONTH,
MF_HLP_REPID LIKE SY-REPID.
FIELD-SYMBOLS: .
Wert von Dynpro lesen
GET CURSOR FIELD MF_DYNPFIELDS-FIELDNAME.
APPEND MF_DYNPFIELDS.
MF_HLP_REPID = SY-REPID.
DO 2 TIMES.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = MF_HLP_REPID
DYNUMB = SY-DYNNR
TABLES
DYNPFIELDS = MF_DYNPFIELDS
EXCEPTIONS
INVALID_ABAPWORKAREA = 01
INVALID_DYNPROFIELD = 02
INVALID_DYNPRONAME = 03
INVALID_DYNPRONUMMER = 04
INVALID_REQUEST = 05
NO_FIELDDESCRIPTION = 06
UNDEFIND_ERROR = 07.
IF SY-SUBRC = 3.
Aktuelles Dynpro ist Wertemengenbild
MF_HLP_REPID = 'SAPLALDB'.
ELSE.
READ TABLE MF_DYNPFIELDS INDEX 1.
Unterstriche durch Blanks ersetzen
TRANSLATE MF_DYNPFIELDS-FIELDVALUE USING '_ '.
EXIT.
ENDIF.
ENDDO.
IF SY-SUBRC = 0.
Konvertierung ins interne Format
CALL FUNCTION 'CONVERSION_EXIT_PERI_INPUT'
EXPORTING
INPUT = MF_DYNPFIELDS-FIELDVALUE
IMPORTING
OUTPUT = MF_MONAT
EXCEPTIONS
ERROR_MESSAGE = 1.
IF MF_MONAT IS INITIAL.
Monat ist initial => Vorschlagswert aus akt. Datum ableiten
MF_MONAT = SY-DATLO(6).
ENDIF.
CALL FUNCTION 'POPUP_TO_SELECT_MONTH'
EXPORTING
ACTUAL_MONTH = MF_MONAT
IMPORTING
SELECTED_MONTH = MF_MONAT
RETURN_CODE = MF_RETURNCODE
EXCEPTIONS
FACTORY_CALENDAR_NOT_FOUND = 01
HOLIDAY_CALENDAR_NOT_FOUND = 02
MONTH_NOT_FOUND = 03.
IF SY-SUBRC = 0 AND MF_RETURNCODE = 0.
ASSIGN (MF_DYNPFIELDS-FIELDNAME) TO <MF_FELD>. " ==>> note 148804
<MF_FELD> = MF_MONAT.
CALL FUNCTION 'CONVERSION_EXIT_PERI_OUTPUT'
EXPORTING
INPUT = MF_MONAT
IMPORTING
OUTPUT = MF_DYNPFIELDS-FIELDVALUE.
COLLECT MF_DYNPFIELDS.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
DYNAME = MF_HLP_REPID
DYNUMB = SY-DYNNR
TABLES
DYNPFIELDS = MF_DYNPFIELDS
EXCEPTIONS
INVALID_ABAPWORKAREA = 01
INVALID_DYNPROFIELD = 02
INVALID_DYNPRONAME = 03
INVALID_DYNPRONUMMER = 04
INVALID_REQUEST = 05
NO_FIELDDESCRIPTION = 06
UNDEFIND_ERROR = 07. "<<== note 148804
ENDIF.
ENDIF.
ENDFORM. "MONAT_F4
*& Form get_month_dates
Calculating the Month Start & End Date
FORM GET_MONTH_DATES.
IF M1 = 'X'.
FYEAR = P_SPMON+0(4).
MON = P_SPMON+4(2).
CONCATENATE FYEAR MON '01' INTO R_BUDAT-LOW.
R_BUDAT-SIGN = 'I'.
R_BUDAT-OPTION = 'BT'.
CALL FUNCTION 'BKK_GET_MONTH_LASTDAY'
EXPORTING
I_DATE = R_BUDAT-LOW
IMPORTING
E_DATE = R_BUDAT-HIGH.
APPEND R_BUDAT.
CLEAR S_BUDAT.
REFRESH S_BUDAT.
S_BUDAT-SIGN = 'I'.
S_BUDAT-OPTION = 'BT'.
S_BUDAT-LOW = R_BUDAT-LOW.
S_BUDAT-HIGH = R_BUDAT-HIGH.
APPEND S_BUDAT.
ELSE.
FYEAR = P_SPMON+0(4).
MON = P_SPMON+4(2).
CONCATENATE FYEAR MON '01' INTO R_BUDAT-LOW.
R_BUDAT-SIGN = 'I'.
R_BUDAT-OPTION = 'BT'.
CALL FUNCTION 'BKK_GET_MONTH_LASTDAY'
EXPORTING
I_DATE = R_BUDAT-LOW
IMPORTING
E_DATE = R_BUDAT-HIGH.
APPEND R_BUDAT.
ENDIF.
ENDFORM. " get_month_dates
*& Form output_table_Check
checking for records for output
FORM OUTPUT_TABLE_CHECK .
DESCRIBE TABLE I_FINALT LINES INDEX.
IF INDEX EQ 0.
MESSAGE I041 WITH TEXT-005.
LEAVE LIST-PROCESSING.
ENDIF.
ENDFORM. "OUTPUT_TABLE_CHECK
*& Form Z_TOP_OF_PAGE
for setting the details in the top of page *
has no formal paramters *
FORM Z_TOP_OF_PAGE.
DATA: V_MON(2),
V_YR(40),
V_FIN(18),
V_FIN1(48),
LOW(10),
HIGH(10).
V_MON = P_SPMON+4(2).
V_YR = P_SPMON+0(4).
FHEADER-TYP = 'H'.
FHEADER-INFO = 'Stock Register Report (FG Stock)'.
APPEND FHEADER.
CLEAR FHEADER.
*if m1 = 'X'.
CONCATENATE 'Month = ' v_mon '.' v_yr INTO v_fin.
fheader-typ = 'H'.
fheader-info = v_fin.
APPEND fheader.
CLEAR fheader.
*endif."prabhu on 18.5.5
IF D1 = 'X'.
CLEAR S_BUDAT.
LOOP AT S_BUDAT.
CONCATENATE S_BUDAT-LOW6(2) '/' S_BUDAT-LOW4(2) '/'
S_BUDAT-LOW+0(4) INTO LOW.
CONCATENATE S_BUDAT-HIGH6(2) '/' S_BUDAT-HIGH4(2) '/'
S_BUDAT-HIGH+0(4) INTO HIGH.
CONCATENATE 'Date = ' LOW ' - ' HIGH INTO V_FIN1.
FHEADER-TYP = 'H'.
FHEADER-INFO = V_FIN1.
APPEND FHEADER.
CLEAR FHEADER.
ENDLOOP.
ENDIF.
ENDFORM. " Z_TOP_OF_PAGE
*& Form Z_LAYOUT_SETTINGS
this is done for setting the properties for the layout of the *
grid *
has no formal paramters *
FORM Z_LAYOUT_SETTINGS.
FS_LAYO-ZEBRA = 'X'. " Output in Zebra pattern
FS_LAYO-DETAIL_POPUP = 'X'. " A popup window appears to give
FS_LAYO-DETAIL_TITLEBAR = TEXT-022.
FS_LAYO-COLWIDTH_OPTIMIZE = 'X'.
ENDFORM. " Z_LAYOUT_SETTINGS
*& Form Z_ALV_EVENTS
This is used for handling the events TOP OF PAGE and the USER *
COMMAND event *
has no formal paramters *
FORM Z_ALV_EVENTS.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = FEVENTS[].
READ TABLE FEVENTS WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC = 0.
FEVENTS-FORM = 'Z_TOPOFPAGE'.
MODIFY FEVENTS INDEX SY-TABIX.
CLEAR FEVENTS.
ENDIF.
READ TABLE FEVENTS WITH KEY NAME = 'USER_COMMAND'.
IF SY-SUBRC = 0.
FEVENTS-FORM = 'Z_USER_COMMAND'.
MODIFY FEVENTS INDEX SY-TABIX.
CLEAR FEVENTS.
ENDIF.
ENDFORM. "Z_ALV_EVENTS
*& Form Z_CREATE_FIELD_CATALOG
here the field catalog is created for the primary list *
no formal parameters *
FORM Z_CREATE_FIELD_CATALOG.
for the Plant
FCAT-FIELDNAME = 'WERKS'.
FCAT-KEY = 'X'.
FCAT-OUTPUTLEN = '000005'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Plant'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Material Type
FCAT-FIELDNAME = 'MTART'.
FCAT-KEY = 'X'.
FCAT-OUTPUTLEN = '000006'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'MatTyp'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Material No.
FCAT-FIELDNAME = 'MATNR'.
FCAT-KEY = 'X'.
fcat-hotspot = 'X'.
FCAT-OUTPUTLEN = '000018'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Material'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Material Description
FCAT-FIELDNAME = 'MAKTX'.
FCAT-KEY = ''.
FCAT-OUTPUTLEN = '000040'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Description'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Unit of Measure
FCAT-FIELDNAME = 'MEINS'.
FCAT-KEY = ''.
FCAT-OUTPUTLEN = '03'.
FCAT-JUST = 'C'.
FCAT-SELTEXT_M = 'UOM'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'UNIT'.
APPEND FCAT.
CLEAR FCAT.
for the Plant
FCAT-FIELDNAME = 'MONTH'.
FCAT-KEY = 'X'.
FCAT-OUTPUTLEN = '08'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'MONTH'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Opening Stock
FCAT-FIELDNAME = 'C_STK'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Opening Stock'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
fcat-do_sum = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
for the Total Receipts
FCAT-FIELDNAME = 'TRECEP'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Total Receipts'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
for the Production
FCAT-FIELDNAME = 'PRODU'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Production'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
for the Other Plant Receipts
FCAT-FIELDNAME = 'RECEP'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Othr Plnt Recpts'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
Sales Return
FCAT-FIELDNAME = 'SAL_RET'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Sales Return'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
Total Dispatches
FCAT-FIELDNAME = 'TDISP'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Total Dispatches'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT. -
Please help with creating a summary report from data collected in a fillable PDF form.
I'm sure this has been asked before so I apologize in advance - I'm new to this forum and I'm not quite sure of which section I should be in. If I may just describe a certain scenario of something I am trying to create - could you please point me in the right direction?
I'm looking to create a summary report/form to help me better organize my patients after each appointment. So data collected from other fillable forms I've created, will lead to the final page to print that will include selections from fillable text boxes or drop down lists, etc to basically summarize each encounter. It should go something like this:
FORM 1:
-pt chart #
-pg age
-purpose for visit
-date of visit
-diagnosis
-prognosis
-etc
SUMMARY page
On (-date of visit), patient (-pt chart #) arrived with complaint of (-purpose for visit)....
The diagnosis was determined to be (-diagnosis), treatment to be performed is suggested to be (-treatment) with a (-prognosis) prognosis. Treatment was (accepted or not) and completed on... etc. etc... you get the idea
Does anyone know how I can do this?
Thank you all for your time and advice!I have downloaded Castor and got some good tutorials, but.......
There is a problem, when I try to use the Marshaller to get an XML document the following error is reported:
java.lang.NoClassDefFoundError: org/apache/xml/serialize/XMLSerializer
I have scanned the Internet looking for a solution, some recommend including Xecers in the Classpath. I downloaded Xerces 2.7.1 and added it to as instructed but this did not work.
Hope you can help -
Hardware Summary Report export
Using ConsoleOne, and performing a Zenworks Report (Hardware Summary
Report), this is OK but I need to export it to an Access database.
It exports, but half the info on the Zen report is not exported (Current
Speed and HD Size). I've tried exporting to other formats like CSV but it
still does not export all the fields.
Failing this, I tried importing the Zen Inventory tables using ODBC. I've
pieced together bits of info and some of the tables that have the info I
need, but I do not know how the tables are related to each other.
Any help is greatly appreciated.
Mark O'Neill, Systems Administrator, Ultra Electronics PMESMoneill,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
Creating custom summary reports
Using a 360 feedback performance review template, I received over 300 responses with feedback on about 70 employees. I would like to create a summary report for each employee that collates the information received from survey respondents.
So, for example, if one person has 3 reviews, I want to collate into a report - one for each person that consolidates all the information & comments received.Hi,
>>So, for example, if one person has 3 reviews, I want to collate into a report - one for each person that consolidates all the information & comments received.
FormsCentral does not support customization of the summary report as you mentioned above.
You could export the responses to say, Excel, and then use Excel to edit/rearrange your data and generate the graph/report.
Thanks,
Lucia -
How to implement the summary report of a specific property?
Hi Experts.
We want to realize the summary report of specific property on following situation, but we can't find the good solution.
for instance:
(1)ENTITY Dimension
ID Region
DE EUROPE
FR EUROPE
MY ASIA
ID ASIA
TH ASIA
("REGION" is one of the properties of ENTITY dimension)
(2)Example Data
ID JAN FEB
DE 10 5
FR 5 5
MY 10 10
ID 2 3
TH 23 24
(3)Report that we wanna realize
ID JAN FEB
EUROPE 15 10
ASIA 35 37
In addition, we wanna make this report as following situations:
-Without assigning "Region" as hierarchy
-Without displaying each member level (DE, FR, ...). only display their property such as EUROPE and ASIA.
-BPC version is 10.1(NW).
By the way, we make out to subtotal each property to use "Member Sorting & Grouping" in menber selector, but we want to implement without displaying each member.
Is it possible to implement? Please advise us the good solution.
Best Regards,
MasaHi Vadim,
Previously I had the same requirement as masa, So I have searched for solution which masa is asking for.
At that time I also came to conclusion that creating hierarchy would so this problem, but didn't created because I referred somewhere that creating 3-4 hierarchy for dimension is good practice. More than that it might impact performance. We already had that same no. of hierarchy.
This type of report can be created with the of BW Bx Query, so we created with it.
Regards
Harpreetsingh -
Prime Executive Summary Report
Hi Guys,
When we run Executive Summary Report (Reports > Report Launch Pad > Network Summary > Wireless Network Executive Summary) on Prime we are getting 13 page long report.
Half of the pages (6 pages) filled with Network Air Quality vs Time information which is not giving us much value & make the report like a detail report.(no body like to scroll through 13 pages & get an idea about wireless network performance summary)
Time Radio Type AQ Minimum Index AQ Average Index
2013-Dec-05, 11:08:12 EST 802.11b/g/n 70 98.44
2013-Dec-05, 11:24:22 EST 802.11b/g/n 75 98.43
2013-Dec-05, 11:40:20 EST 802.11b/g/n 68 98.43
2013-Dec-05, 11:56:15 EST 802.11b/g/n 65 98.38
2013-Dec-05, 12:12:25 EST 802.11b/g/n 68 98.39
2013-Dec-05, 12:28:34 EST 802.11b/g/n 70 98.41
2013-Dec-05, 12:44:47 EST 802.11b/g/n 66 98.39
2013-Dec-05, 13:00:43 EST 802.11b/g/n 50 98.33
Is there anyway to get rid of this information from the Summary Report ? With WCS we did not have such a problem when generating these daily reports
TIA
RasikaAnybody experienced the same problem?
-
Report Performance - timeout short dump
Hello Experts,
i am trying to improve the performace of a report that was developed long time ago.
Issues i found:
1. The report has many select...Endselect combinations, and selects inside the loop statements.
2. Most of the selects have the addition 'into corresponding fields of' for selecting a few fields, without the table addition.
3. Also few selects have the 'select * from' syntax.
data: begin of itab occurs 0,
f1,
f2
f3.....
fn,
end of itab.
Ex: loop at itab.
select f1 f2 f3 from table1
into corresponding fields of itab1.
collect itab1.
endselect.
select f4 f5 from table2
into corresponding fields of itab2.
endselect.
endloop.
All this leeds to performace issues.
i have checked ST05, and i have got the details of the error.
My question is which one of the reasons i mentioned above are a major factor in delaying the report performance?
Which one of the above should i conetrate first to get the long runtime down? My goal is to keep my changes to the minimum and improve the performance. Please advise.> My question is which one of the reasons i mentioned above are a major factor in delaying the report
> performance?
Don't ask people for guesses, if you can see the facts!
Run the SQL Trace several times, and use go to 'Trace List' -> 'Summarize Trace by SQL Statement'
=> Shows you total DB time and time per statement (all executions), the problems are on top of the list.
Check ABAP, detail, and explain!
Read more here:
/people/siegfried.boes/blog/2007/09/05/the-sql-trace-st05-150-quick-and-easy
Siegfried -
Report Performance degradation
hi,
We are using around 16 entities in crm on demand R 16which includes both default as well as custom entites.
Since custom entities are not visible in the historical subject area , we decided to stick to the real time reporting.
Now the issue is , we have total 45 lakh record in these entites as a whole.We have reports where we need to retrieve the data across all the enties in one report.Intially we tested the reports with lesser no of records...the report performance was not that bad....but gradually it has degraded as we loaded more n more data over a period of time.The reports now takes approx 5-10 min and then finally diaplays an error msg.Infact after creating a report structure in Step 1 - Define Criteria......n moving to Step 2 - Create Layout it takes abnormal amount of time to display.As far as reports are concerned, we have built them using the best practice except the "Historical Subject Area Issue".
Ideally for best performance how many records should be there one entity?
What cud be the other reasons for such a performance?
We are working in a multi tenant enviroment
Edited by: Rita Negi on Dec 13, 2009 5:50 AMRita,
Any report built over the real-time subject areas will timeout after a period of 10 minutes. Real-time subject areas are really not suited for large reports and you'll find running them also degrades the application performance.
Things that will degrade performance are:
* Joins to other dimensions
* Custom calculations
* Number of records
* Number of fields returned
There are some things that just can't be done in real-time. I would look to remove joins from other dimensions e.g. Accounts/Contacts/Opportunities all in the same report. Apply more restrictive filters, e.g. current week/month to reduce the number of records required. Alternatively have very simple report, extract to excel and modify from there. Hopefully in R17 this will be added as a feature but it seems like you're stuck till then
Thanks
Oli @ Innoveer -
Report performance while creating report on BEx
All all!
I am creating a report on BOE 4.0 on top of BEx connection as a source. I have developed reports on top of universe in the past and i know that if we keep calculations on reporting end it hampers the report performance. Is this the same case with BEx? if we are following the best practices is it ok to say that we should keep all heavy calculations/ aggregation on BEx or backend for better report performance.
Can you guys please provide your opinion based on your experiance and knowledge. Any feedbacks will help! Thanks.Hi,
Definitely best-practice to delegate a maximum of CKF to the Cube where possilble, put RKF in the BEx query, and Filters too.
also, add Default Values to your Variables (this will speed up generation of the bics transient universe)
also, since Patch2.10, we are seeing some significant performance improvements reducing 'document initialization' and 'time to prompts' by up to 50% (step such as these often took 1.5 minutes, even on sized systems)
Also, make sure you have BW corrections like this implemented: 1593802 Performance optimization when loading query views
In the BusinessObjects landscape - especially with BI 4.0 - it's all about Sizing and Tuning . Here is your bible the 'sizing companion' guide : http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000738725&_OBJECT=011000358700000307202011E
Pay particular attention to BICSChunkSize registry settings
Also, the -Xmx JVM Heap Size for the Adaptive Processing Server that is running the DSL_Bridge service.
Regards,
H -
Report Performance for GL item level report.
Hi All,
I have a requirements to get GL line items
report based on GL Line items so have created data model like 0FI_GL_4->DSO-> cube and tested everything is fine but when execute in production the report performance is very bad.
Report contains document number, GL act, comp.code, posting date objects.
I have decided to do as follows to improve reporting performance
· Create Aggregate on Document, GL characteristic
· Compression.
Can I do aggregates 1st then do the compression.
Please let me know if I missing out anything.
Regards,
Naani.Hi Naani,
First fill the Aggrigates then do Compression,run SAP_INFOCUBE_DESIGN Check the size of Dimension maintain Line item, High cordinality to the dimension, Set Cahe for query in RSRT,
Try to reduce Novigational Attr in report. Below document may help you.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6071ed5f-1057-2e10-deb6-d3426fec0219?QuickLink=index&…
Regards,
Jagadeesh -
Bad reporting performance after compressing infocubes
Hi,
as I learned, we should compress requests in our infocubes. And since we're using Oracle 9.2.0.7 as database, we can use partitioning on the E-facttable to still increase reporting performance. So far all theory...
After getting complaints about worse reporting performance we tested this theory. I created four InfoCubes (same datamodel):
A - no compression
B - compression, but no partitioning
C - compression, one partition for each year
D - compression, one partition for each month
After loading 135 requests and compressing the cubes, we get this amount of data:
15.6 million records in each cube
Cube A: 135 partitions (one per request)
Cube B: 1 partition
Cube C: 8 partitions
Cube D: 62 partitions
Now I copied one query on each cube and with this I tested the performance (transaction rsrt, without aggregates and cache, comparing the database time QTIMEDB and DMTDBBASIC). In the query I selected always one month, some hierarchy nodes and one branch.
With this selection on each cube, I expected that cube D would be fastest, since we only have one (small) partition with relevant data. But reality shows some different picture:
Cube A is fastest with an avg. time of 8.15, followed by cube B (8.75, +8%), cube C (10.14, +24%) and finally cube D (26.75, +228%).
Does anyone have an idea what's going wrong? Are there same db-parameters to "activate" the partitioning for the optimizer? Or do we have to do some other customizing?
Thanks for your replies,
KnutHi Björn,
thanks for your hints.
1. after compressing the cubes I refreshed the statistics in the infocube administration.
2. cube C ist partitioned using 0CALMONTH, cube D ist partitioned using 0FISCPER.
3. here we are: alle queries are filtered using 0FISCPER. Therefor I could increase the performance on cube C, but still not on D. I will change the query on cube C and do a retest at the end of this week.
4. loaded data is joined from 10 months. The records are nearly equally distributed over this 10 months.
5. partitioning was done for the period 01.2005 - 14.2009 (01.2005 - 12.2009 on cube C). So I have 5 years - 8 partitions on cube C are the result of a slight miscalculation on my side: 5 years + 1 partion before + 1 partition after => I set max. no. of partitions on 7, not thinking of BI, which always adds one partition for the data after the requested period... So each partition on cube C does not contain one full year but something about 8 months.
6. since I tested the cubes one after another without much time between, the system load should be nearly the same (on top: it was a friday afternoon...). Our BI is clustered with several other SAP installations on a big unix server, so I cannot see the overall system load. But I did several runs with each query and the mentioned times are average times over all runs - and the average shows the same picture as the single runs (cube A is always fastest, cube D always the worst).
Any further ideas?
Greets,
Knut -
Urgent ,complaint summary report ??
Hi Gurus,
"The new complaint summary report is missing Location from the Ship-to Name/Location and Sold-to Name/Location fields" this is the problem.
Please let me know how to go abt this .. which tcodes do I need to refer.. do I need to look at CRMD_ORDER
if yes then how do I look at the report ??
I'll reward points for this ..Hi Ravi,
Thanks for your reply ..
Is this the right site .. I get an error message ...
could you please send all the possible CRM Forum sites
were I can place query.. to it...
Rgds,
Aryan -
PURCHASE & SALE SUMMARY REPORT
hi....
i want T-codes for getting PURCHASE & SALE SUMMARY REPORT ALONG WITH VENDOR & CUSTOMER WISE ALSO.
Thanks & Regards
Rekha Sharmahi...
by these t.code i not found any result pls do needful.
i want vendorwise/customerswise purchase/sale summry. It should show Purchase/Sale Qty. & amount.
Thanks & Regards
Rekha sharma -
At new statement for Summary report
Hi,
I have made a vendor balance report having debit and credit entry in on eintrenal table IT_BSIK, with all line item detail in another table IT_TAB1 i want to make summry report by adding all the amount of of line item it is also working fine but i wan tto change the summary report i want summary for debit and credit entery seperate How to do it find Below the code part for summary how to use AT NEW SHKZG then append the IT_TAB1
find the code here.
**********************summarised part
loop at it_lfnr.
Clear : VTOTBAL, vNtdue, vDue, vDue0, vDue31, vDue61, vDue91,V1TOTBAL.
loop at it_bsik where lifnr = it_lfnr-lifnr.
IT_TAB1-LIFNR = IT_BSIK-LIFNR.
IT_TAB1-BUKRS = IT_BSIK-BUKRS.
IT_TAB1-SAKNR = IT_BSIK-SAKNR.
IT_tab1-NAME1 = IT_bsik-NAME1.
ADD IT_BSIK-dmbtr TO V1TOTBAL.
move V1TOTBAL TO IT_TAB1-dmBTR.
ADD IT_BSIK-WRBTR TO VTOTBAL.
move VTOTBAL TO IT_TAB1-WRBTR.
MOVE IT_BSIK-WAERS TO IT_TAB1-WAERS.
ADD IT_BSIK-NTDUE TO VNTDUE.
move VNTDUE TO IT_TAB1-NTDUE.
ADD IT_BSIK-DUE TO VDUE.
move VDUE TO IT_TAB1-DUE.
ADD IT_BSIK-DUE0 TO VDUE0.
move VDUE0 TO IT_TAB1-DUE0.
ADD IT_BSIK-DUE31 TO VDUE31.
move VDUE31 TO IT_TAB1-DUE31.
ADD IT_BSIK-DUE61 TO VDUE61.
move VDUE61 TO IT_TAB1-DUE61.
ADD IT_BSIK-DUE91 TO VDUE91.
move VDUE91 TO IT_TAB1-DUE91.
endloop.
append it_tab1.
endloop.
***********************************end of summarised vendor part ***************************Hi,
loop at it_bsik where lifnr = it_lfnr-lifnr.
if it_bsik-SHKZG eq 'Debit.
add all your fields to table itab.
else.
add all your fields to table itab1.
endif.
endloop.
This way you will get debit data in table itab and credit data in itab1.
Then you can use At new lifnr for both tables separately and you will be able to sum it separately.
Hope its clear.
Thanks,
Archana
Maybe you are looking for
-
I have a table-valued function that run in sql 2005 and when try to execute in sql 2008 r2, return the next "Conversion failed when converting date and/or time from character string". USE [Runtime] GO /****** Object: UserDefinedFunction [dbo].[f_Pi
-
Jar files ------wljrockit/docs142/JRA.zip
Hi I have download the JRA from http:edocs.bea.com/wljrockit/docs142/JRA.zip Here i have 5 jar file. Where i shd add the jar files to use the Utility can anyone mail me in detail Thanks in Adv Regards maria [email protected]
-
Enhanced Interface Determination - does not work!
Hi guys, well i have a scenario where i have done a multi mapping where MT_TYPSCH is generated for each new value which occurs in one special source field. <NO>1</NO> <NO>2</NO> <NO>3</NO> ..so three MT will be generated. Now i would like these messa
-
Index. Strange thing happens
Oracle Version: 8.0.5.0.0 on windows NT 4.0 We have been having problem with some tables, access method. For Example, TBPLL. The Primary Key is (PLL_LOJ_NUMERO, PLL_PCE_CODIGO). I'm gonna show two queries with the SAME WHERE clause, and the explain p
-
Sketch photocopy filter stays too light on subsequent pictures. help.
Used a sketch photcopy filter on a picture and then made changes (text, clone stamp) to the picture after applying the filter. Now in putting new photos through the filter, the photos stay too light even with the darkest settings. How do I make it