Reserved error (-7732); there is no message for this error.

I have been trying for months to link an Oracle 10g database to my Access 2010 database. I have successfully added the appropriate Oracle ODBC connection. However, when I try to import a table from the database, I get the error "Reserved error (-7732);
there is no message for this error." Really useful, isn't it? I've tried searching both the Microsoft and Oracle forums but no solution that I've seen on this error has been able to fix this. I have a Windows 7 64-bit machine, I'm running 64-bit Office
and cannot change to the 32-bit version. I have the 64-bit Oracle ODBC driver installed properly as well. Does anyone have any other information on this error? It boggles my mind why someone would come up with this error and not have any further information
on it but still bother to put "there is no message for this error." Anyway, someone please help me out. Thanks.

Hi，
As far as I know, this is known to occur with 64 bit versions of Access 2010 and Oracle Instant Client tools when the Oracle Instant Client/Data Access Components are lower than version 11.2.0.3.0.
Please try to update the Oracle data access components to version 11.2.0.3.0 or newer.
Here is the link to download the latest data access components from Oracle
http://www.oracle.com/technetwork/database/windows/downloads/index-090165.html
More reference:
Installation instructions
http://www.oracle.com/technetwork/topics/dotnet/downloads/install112030-1440546.html
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Regards,
George Zhao
TechNet Community Support

Similar Messages

  • Bought 2nd ipod nan0, computer keeps reading error message? is there a quick fix for this?

    Bought a 2nd ipod nano , computer keeps reading error message? is there a quick fix for this?

    There are a lot of different error messages, which one are you getting. Verbatim with the number please.

  • There is no entry for this function in Table 168F (system table). An error involving the screen control has probably occurred.

    Hi All,
    i created one  enchancement to ME21n screen,
    i added one screen at header
    When i running the the transaction ME41 it shows the following error.
    This function not defined
    Message no. 06006
    Diagnosis
    There is no entry for this function in Table 168F (system table). An error involving the screen control has probably occurred.
    Procedure
    Contact your system administrator.
    Am i need to add this functionalty to any  sap table.
    plz guide me on this.

    Hi Krishna
    Have you added any buttons in the custom screen if yes then you will have to maintain configuration data for Function code processing.
    Please search on SCN for the same
    Nabheet

  • Oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters

    Dear Guru's,
    I am not able to solve the above issue for last couple of days.
    I am newbie to the webservice
    My Issue...
    I am using Jdeveloper 11.1.2.4.0 Release 2
    1. Using Jdev I built one small Web Service with two methods.
            While testing the Webservice...
                   I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
    2. I created another application to consume the web service i created.
                   1. I added the webservice SOAP and added the method.
                   2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
    3. While executing the created jsf page I received the error message as below
    "oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
    Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
    Can anybody help to solve this issue.
    Thanks and Regards,
    Durai S E

    Dear Guru's,
    I am not able to solve the above issue for last couple of days.
    I am newbie to the webservice
    My Issue...
    I am using Jdeveloper 11.1.2.4.0 Release 2
    1. Using Jdev I built one small Web Service with two methods.
            While testing the Webservice...
                   I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
    2. I created another application to consume the web service i created.
                   1. I added the webservice SOAP and added the method.
                   2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
    3. While executing the created jsf page I received the error message as below
    "oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
    Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
    Can anybody help to solve this issue.
    Thanks and Regards,
    Durai S E

  • I have authorized my computer on i tunes but when i am going to install apps there comes a message is this computer is no longer authorized for purchased item those are on this phone . so now what should i do?

    i have authorized my computer on i tunes but when i am going to install apps there comes a message is this computer is no longer authorized for purchased item those are on this phone . so now what should i do?

    Click here and follow the instructions.
    (93307)

  • HT3669 Since I starting using my MacMini (2011 version) I have not been able to print double sided from my HP Photosmart plus - there is no option for this in the Printer dialog box as there was in the similar dialog box on my PC. How do I set up this opt

    Since I starting using my MacMini (2011 version) I have not been able to print double sided from my HP Photosmart plus - there is no option for this in the Printer dialog box as there was in the similar dialog box on my PC. How do I set up this option?

    1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
    OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
    Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
    Your first priority is to make more space on that HD. Nothing else can be done until you do.
    Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
    Your Library has been damaged from being run on an overfull disk.
    How much free space on it now?

  • Hi. Whenever I go through one of the menus in firefox, the links remain highlighted after my mouse passes over them. Is there a bug fix for this or is there something wrong with my computer? I am running windows 7 if that helps.

    Hi. Whenever I go through one of the menus in firefox, the links remain highlighted after my mouse passes over them. Is there a bug fix for this or is there something wrong with my computer? I am running windows 7 if that helps. This problem started ever since I upgraded to version 5.

    I have downloaded and used the iPod Reset Utility, alot that did. My current state is iTunes on my XP Home with SP3 sees the iPod. When I drag a song to the iPod, the Sync message appears for about 5 minutes, then the Apple symbol appears. But no song has been transferred to the iPod.
    I tried to tap into the XP iTunes database from my iBook, but although it acted like it would add the XP library to the iBook library, it did not. I've got 19 Gs of songs on the XP. If I have to load each song from its original CD to get it on my iBook I'm going to start looking for some other app or device so that I can listen to my music.
    It is a shame, in the old days, Apple techs use to look at what was going on, now it appears they don't, so they never know they have problems until Apple's profits fall.

  • There are no hierarchies for this InfoSource in source system

    Hello Gurus,
    We have recently created an extractor for the Country hierarchies, these are the steps we took:
    SBIW->Settings for Application-Specific DataSources (PI)->Profitability Analysis->Create Hierarchy DataSource (TC: KEB1)
    We informed the infoobject 0country and the characteristic KMLAND.
    We replicated the datasources, created the transfer rules in our dev. system and loaded the required hierarchy with success.
    We transported our requests to our prod. environment. and when creating the infopackage for the hierarchy we get the message "There are no hierarchies for this InfoSource in source system". We have checked in our R/3 system and the hierarquies are there.
    Are we missing something in the process so that we may see the available hierarquies?
    Thanks!!! Points will be rewarded.

    Hi Sumit,
    You were correct, the request did not transport the contents of the table TKEBWLH. There is a note from SAP which corrects this problem, note 856895. v02. After applying the note and recreating the request, we manage to see the available hierarchies in our Prod. System.
    Thanks for your help!
    Regards,
    Elder

  • I have never had the issues I am having with the latest update to Yosemite. Is there a fix/update for this?

    I have never had the issues I am having with the latest update to Yosemite. Is there a fix/update for this?

    For what? It works fine for me on three different computers. If you want a fix for something then be more specific.
    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.
    5. Reinstall Yosemite from Scratch:
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    How to Clean Install OS X Yosemite
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • My icloud account on my new iphone does not match the user ID for itunes as it is an old apple ID. There is no password for this ID so I cant change it and it wont let me change the apple ID. Any help?

    my icloud account on my new iphone does not match the user ID for itunes as it is an old apple ID. There is no password for this ID so I cant change it and it wont let me change the apple ID. Any help?

    To change to iCloud ID on your phone you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID then sign in with the new ID.  If you don't know the password for the old ID, and if the old ID is an earlier version of your current ID, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • I can't connect my canon mp160 to my new apple iMac desktop. It just won't print although it comes up as the printer. there is no driver for this from canon who states that I probably don't need a driver for this

    I can't connect my canon xp160 to my new IMAC. It does recognize it but won't print. there is no driver for this as per Canon and they state that I may not need one. thanks!1

    If you want to print, then you will need a printer driver. There is no printer driver available from Apple for the MP160. And the last driver that Canon released for this model was for OS X 10.7. You may be able to install this 10.7 driver, although it is not digitally signed so Gatekeeper will block the installation. To get past Gatekeeper, you can hold down the Control key and click on the installer. A pop-up menu will appear. Select Open. You will then be given the option to install the old driver.
    With the driver installed, add the printer via Printers & Scanners and see if you can print.

  • I have just agreed to software updates on my imac and now can't open my mail.  There is a message saying this version of mail isn't compatible with this latest software.  I have located the updated mail in the applications folder but it won't open. Help!

    I have just agreed to software updates on my imac and now can't open my mail.  There is a message saying this version of mail isn't compatible with this latest software.  I have located the updated mail in the applications folder but it won't open. I don't have the original operating software disk.  Does anyone have any suggestions?

    Your reply suggests that you have moved Mail to a different location, which (as I said) will prevent it from being properly updated. You cannot use Mail 4.5 with any recent version of Mac OS X. Mac OS X 10.7 (Lion) included Mail 5 and Mac OS X 10.8 (Mountain Lion) includes Mail 6. I'm assuming that you have either Lion or Mountain Lion, but if that is incorrect, you will need to provide that information.
    At this point, you will need to reinstall your system. Hold down command-R at startup and reinstall the system right on top of the old one. This should not disturb any of your documents or applications, though you should have backups beforehand in case something goes wrong. And at this point, with your system in an uncertain state (I don't entirely know what you have done to it), something could go wrong.
    You will also want to delete the old copy of Mail 4.5, wherever that is. You can't use it.
    In the future, do not move any of the preinstalled applications. Leave them where they are.

  • I'm unable to sync my contacts with the new iPhone 5 and my 2012 Hyundai Santa Fe. Will there be a fix for this in the next update?

    I previously had an iPhone 4 synced and paired with my 2012 Hyundai Santa Fe and had no issues. Now I have a new iPhone 5 and am able to sync the phone but the contacts will not update in the phone book listing for the vehicle. I've tried several times to re-sync and pair the phone to the vehicle and still the same issue. I'm able to make an receive calls but no contact information is being displayed. From all of the previous community issues reported it's not an AT&T issue, Hyundai issue, it's clearly pointing at the device (iPhone 5) being the issue.
    Will there be a fix for this in the next update?
    Thank you.

    Thanks for your response. However, after speaking with a level 2 Apple Advisor and Hyundai there is an issue that both companies are aware of and are working towards a resolution. Here's a blurb from Hyundai that was sent to me after I spoke with Apple Advisor:
    "We apologize for any inconvenience associated with the technical issues with devices connected via Bluetooth. Hyundai is aware of the iPhone losing its Bluetooth connection to the vehicle along with any function associated with it at the time. Hyundai has been able to reproduce the concern in our test vehicles and have sent all necessary information to Apple engineers. Hyundai received confirmation from Apple that they will work on debugging.
    If your iPhone is 3G, 4, 4S, 5 and has one of the following iOS: 6.0, 6.1.0, 6.1.1, 6.1.2, 6.1.3, 6.1.4 or higher, you may be affected." - Hyundai Engineering

  • I have not been able to update my fairy farm game for the last 5days as it quit at launch. I am afraid to delete and reinstall the game as i might lose all. Anyone knows if there is an update for this game? Please help. Thanks

    I have not been able to update my fairy farm game for the last 5days as it quit at launch. I am afraid to delete and reinstall the game as i might lose all. Anyone knows if there is an update for this game? Please help. Thanks

    Erdygirl please be aware you are posting to a public forum.  I have removed your personal information from your previous post.
    Please check your account at http://www.adobe.com/ to locate your serial number.  You can find more information on how to locate your serial number at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

  • In OBIEE mobile apps designer there is no option for multi select prompts?The navigation page gives option only for single select?Is there a work around for this?

    In OBIEE mobile apps designer there is no option for multi select prompts?The navigation page gives option only for single select?Is there a work around for this?

    Nic, for me the iTunes window looks like this, when I connect my iPad 3:
    I select the iPad in the "devices" section of the Sidebar (use: "View > Show Sidebar" if the sidebar is hidden).
    Click the "Apps" tab in the "Devices" pane.
    Scroll all the way down in the Devices pane to "File Sharing" "Apps" section.
    Then do I click "GarageBand" to select the documents in the right panel.
    Which part is different for you? Perhaps you could post a screenshot?
    Regards
    Léonie

Maybe you are looking for