Reserved in store, but no date?
Sorry if this has been asked already. I reserved a 3GS for in store pickup last Tuesday night, but the e-mail that was sent to me as the "date" field blank. I'm going to try calling the store to confirm, but would anyone happen to know if if would still be safe to assume that there will be a phone reserved for pick-up come Friday?
That's odd. I just spoke with the store that I reserved with and they told me that there was no way to check the system for the reservation until three days prior to the release. They didn't seem to think it would be a problem anyway, outside of crowds, but they said I should call back Wednesday.
Similar Messages
-
I have a problem with Imovie. Just brought an macbook 15 retina , iLife install and Imovie was working. I than did a data migration from my old macbook pro and now it crashes on start up. I tried to re-install from app store but no option to re-install, just installed and it greyed out.
Well, my two-month-old MBP has no qualms about booting from a no-name external USB HD I put together...
Given that is is a common point of failure, I would imagine a large Apple Store should keep a stock of HD's on hand.
Now since you're a bit desperate and the genie pops up til Saturday and you seem to be the enterprising kind, let's try an experiment: if you have room enough in the external HD and assuming it isn't a Time Machine volume, why don't you plug it in, stick the Install CD and see if the installer lets you select the external drive as the install target. If you can install Leopard on it, on top of the backup without reformatting, and the Mac can boot from the drive afterwards, at least you would have some functionality restored and would be able to pull your stuff from the internal HD. Apple says booting from USB drives is not supported but that does not equate to not possible; some brands do work. Risks? Always. You can always lose your backup. Like I said, a challenge for an enterprising gal....
Next time around, consider having a bootable external clone at hand for rainy days. I keep three myself...
P.S. Since I'll be in the Dallas-FW area in late June, I can volunteer with the confetti.... -
My ipod touch version 1.1.5 will not connect to itunes store but supposedly my software is up to dat and I tried changing date and time and no success, does anyone have any suggestions?
If you really have iOS 1.1.5 you have an 1G (original iPod touch). You need at least iOS 2 for the App Store. The last update for the 1G is 3.1.3 that you get here:
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
https://buy.itunes.apple.com/WebObjects/MZFinance.woa/wa/touchLegacyLandingPage
To more easily find compatible apps:
iOSSearch - search the iTunes store for compatible apps.
Apple Club - filter apps by iOS version.
If necessary
Can't connect to the iTunes Store -
Reserved for Store Pickup, No pre-order and Ship to Store!
I'm reading all these discussions and my head is exploding. I was up @ 4am yesterday banging away like you all.
My criteria was this; I was eligible for upgrade @ $199 with the activation fee waived (sweet). I wanted to pick the phone up at my Apple store because I trust it more then brown.
When I clicked the pre-order link, there was NO option to have it sent to the store, it could only be sent to my house. Let me repeat that, NO option to send anywhere but house. It even says it "Pre-order your iPhone 4 from the Apple Online Store and we’ll ship it free — directly to your door and ready to use."
So I went to the reserve in store process. There was NO WAY TO PAY for it up front. Let me repeat that; NO WAY TO PAY for the reserved phone. So I received my confirmation email and said there is a phone waiting for me on the 24th!
I called 2 Apple stores and chatted online with 3 Apple support people and they ALL, every single 1 of them, said the same exact thing. The only way to pickup in the store is to go through the reservation process. The store will have 2 lines, reserved and general. The reserved will be there all day for you to pick up.
So, does anyone have some proof that you pre-ordered it, paid for it and have it sent to your Apple store, not your home to pick up?timmayb wrote:
I got to the page state,"iPhone is reserved for pickup." Please bring government issued ID, debit or credit card...... No email received. Do I really have one on hold????
This time for this phone things are very confusing. I preordered yesterday for in store pickup got through the verification process saw that all my data and cell plan info were correct. Then at the end I got the message "see you at the store". Bring picture id. Nothing else, no confirming email as of today, nothing showing under my account in the on line store. I just came from the store that I picked for my phone to go to and there is nothing in their system either. So I went down to the AT&T store in that mall and preordered it there, no issues. It's just as well since I'm ordering it under my wife's number to get the discount and would have to go there any way to make the switch. I've read other posts from people that saw the same thing on line that I did when they ordered, "see you at the store" but no other confirmation. I'm going to assume that it means the order did not go through. So keep that in mind if you got what I did. -
4s reservation system, no pick up dates???
finally got into the iphone 4s reservation system to reserve a phone.. It lets me choose my store and pick a phone.. And then in the final step in the process it says there are no pick up dates available for my location... Although the system lets you select that location What gives?
Same here. I think it's just a tease--a few nights ago the website was just broken. Then I could access the site but it wouldn't let me select which store I wanted to pick up. The night after I could select the store but there were no phones. And now I can finally select a phone to reserve but there are no pick up dates available...
-
Issues @ Tropicare, FL store and Open box inventory not found in store but on website
I went to the Tropicare, FL Best buy store on 3/2/15 to a Vizio 65' TV that I had seen as an open box item last week on the best buy website. I originally went on Sunday 3/1 to buy this model from the Florida city store but by the time I got there it had been sold and removed from the website. So when I get to the Tropicare, FL store on 3/2 and show the rep the Open-Box ID: 200002100650426. They tell me they cannot find any such listing. I told them to check another Open-Box ID: 200002100650349 for the same item. I figured since they have the item listed twice on the website both as Geek squad certified that there should be 1 available. They could not find that product either. I pulled up the information on my phone to show the rep. He proceeds to tell me they don't use the website to track inventory and that it takes awhile for the website to update. I found this odd since the other stores I went to on Sunday 3/1 when I had gotten to the stores the items were sold and the items were removed from the website. So I had the rep call another store to see if the last TV only my list was available. They told me it was not, so I checked the website and it was gone. I showed the rep this and they blew me off once again stating they don't check inventory via the website. I told him I find it odd that best buy wouldn't track inventory via there website. He proceeds to show me more expensive options. At this point I was tried of running around south Florida trying to find the Vizio model I wanted. I purchased a LG 65' for $799 which was from the weekly ad. But I wanted to know what the policy was regarding open box items, inventory levels, and availability.
I still would like to buy the VIZIO - Open Box - 65" Class (64.5" Diag.) - LED - 1080p - Smart - HDTV - Black Model: D650I-C3 SKU: 1078018 Open-Box ID: 200002100650426 or Open-Box ID: 200002100650349. As of 3/3 the items are still on the best buy website listing them available for purchase. I would like to buy this item and return the LG I bought yesterday since it is the TV I wanted. BUt i'm afraid I'll run into he same situation of them not "finding" either of the items in there store in stock.
Any assistance or clarification would be greatly appreciated.
Thank you,
OmarHello Omar,
Finding open-box items in fantastic condition is always an exciting purchase! To find that not only one, but two open-box items listed at the same store weren't available would be quite disappointing. I am truly sorry for any frustration that this may have caused you.
With that said, I was able to locate the open-box items in our system, and they would appear to currently be in stock. However, it seems that these items are reserved to fulfill orders that have already been placed. With that said, the store should be responsible for updating their open-box inventory to correctly reflect open-box items available. As you seemed to experience, these inventories can change instantaneously, so stores should be vigilant with these updates.
I apologize for any disappointment that this may cause you. Please know that I am reaching out to the Tropicaire, FL store to ensure they are updating their open-box inventory appropriately. If you should need any further assistance, please let me know.
Sincerely,
Tasha|Social Media Specialist | Best Buy® Corporate
Private Message -
just got a new iphone 5s and i am trying to get on the app store but it is telling me that not connected to itunes when i connect to itunes it was fine then went back to app store it is telling me sign in to itunes store so i do that with my apple id and password but is still isn't working help
Hi there wendyfromnewross,
You may find the troubleshooting steps in the article below helpful.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Troubleshoot issues on an iPhone, iPad, or iPod touch
If you haven't been able to connect to the iTunes Store:
Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
Note: Time Zone may list another city in your time zone.
Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Try resetting (turning off and then on again) your Wi-Fi router.
If the issue persists, try troubleshooting your Wi-Fi networks and connections.
-Griff W. -
I need to update my apps in the App Store, but when i try to update, the Sign Up Apple ID pop up box came out with different Apple ID. How can I change it to mine? My iTunes Store already log in with my own Apple ID.
Just now you said the other Apple ID stored inside it, is that mean all my data back up in that the other ID?
-
I'm using a mid 2014 13" rmbp. I reinstall the Yosemite due to the wifi issue, when finished, the iMovie was not installed, I try to download it from app store, but it's not free. How can I get iMovie back?
It's something to do with the main user account (not iTunes account) on my Mac because I logged in with another account and it downloaded fine, I installed it on the HDD and even though the date in App Store was 16th October 2014, it is the full installer of 10.10.2.
To try to resolve this problem, I have copied the installer app elsewhere and deleted it but App Store still will not allow me to download it with my main user account yet just allowed me to update iTunes.
I had a brainwave last night that it might have been related to me changing the default downloads folder to one not on my boot drive (to save disk space on my main boot drive) but having changed it back, tried again, rebooted and tried yet again, deleted my App Store preferences. nothing has worked. -
It says I'm logged into my Apple ID on my App Store but when I try to download an app it comes up with my mums Apple ID asking for her password yet I have never used her email or Apple ID to login in? Could this be cause we have back up on same comp?
Bojana321 wrote:
... this has only come up today yet it says I'm logged into mine!
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons... -
How to create a Macro in excel to store the excel data to Oracle Database
Hi All
Does anyone has created a macro in excel which on being run stores the excel data to Oracle database. In my project I need to create one such macro for updating oracle database with excel data and another for inserting excel records.
I tried doing this using a macro in MS access but Client wants its to be done using Excel Macro only.
Any help would be highly appreciated.
Thanks in advance..
ShikhaPlease read Chapter 19.7 Creating Selection Lists (http://download.oracle.com/docs/html/B25947_01/web_complex007.htm#CEGFJFED) of the Oracle® Application Development Framework Developer's Guide For Forms/4GL Developers 10g Release 3 (10.1.3.0)
Cheers,
Mick. -
Error while opening the file store file "WLS_DIAGNOSTICS000000.DAT".....
I have a WL 9.2.1 running on Sun solaris o/s .....it is failing to start thowing the following exception
<Mar 19, 2009 5:21:17 PM EDT> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
weblogic.diagnostics.lifecycle.DiagnosticComponentLifecycleException: weblogic.store.PersistentStoreException: java.io.IOException: [Store:280021]There was a
n error while opening the file store file "WLS_DIAGNOSTICS000000.DAT"
at weblogic.diagnostics.lifecycle.ArchiveLifecycleImpl.initialize(ArchiveLifecycleImpl.java:44)
at weblogic.diagnostics.lifecycle.DiagnosticFoundationService.start(DiagnosticFoundationService.java:107)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
Caused by: weblogic.store.PersistentStoreException: java.io.IOException: [Store:280021]There was an error while opening the file store file "WLS_DIAGNOSTICS0
00000.DAT"
at weblogic.store.io.file.Heap.open(Heap.java:166)
at weblogic.store.io.file.FileStoreIO.open(FileStoreIO.java:85)
at weblogic.store.internal.PersistentStoreImpl.open(PersistentStoreImpl.java:350)
at weblogic.store.PersistentStoreManager.createFileStore(PersistentStoreManager.java:202)
at weblogic.diagnostics.archive.DiagnosticStoreRepository.getStore(DiagnosticStoreRepository.java:61)
at weblogic.diagnostics.lifecycle.ArchiveLifecycleImpl.initialize(ArchiveLifecycleImpl.java:42)
... 4 more
Caused by: java.io.IOException: [Store:280021]There was an error while opening the file store file "WLS_DIAGNOSTICS000000.DAT"
at weblogic.store.io.file.StoreDir.throwIOException(StoreDir.java:213)
at weblogic.store.io.file.StoreDir.open(StoreDir.java:103)
at weblogic.store.io.file.Heap.open(Heap.java:164)
... 9 more
Caused by: java.io.IOException: Error from fcntl() for file locking, Resource temporarily unavailable, errno=11
at weblogic.store.io.file.direct.DirectIONative.open(Native Method)
at weblogic.store.io.file.direct.DirectFileChannel.<init>(DirectFileChannel.java:51)
at weblogic.store.io.file.direct.DirectIOManager.open(DirectIOManager.java:138)
at weblogic.store.io.file.StoreFile.openInternal(StoreFile.java:112)
at weblogic.store.io.file.StoreFile.open(StoreFile.java:142)
at weblogic.store.io.file.StoreDir.open(StoreDir.java:95)
... 10 more
i went ahead and checkd the file and the privs on the file they look correct -rw-r--r-- ...but when i just restart it ..it starts with no errors the next time......What could be the issue.....please help
Then only reason i could think of is the size of the file is 35MB now...is this the problem....if yes....is there a way to automaticaly rotate this file ....The root cause appears to be right in the stack trace:
Caused by: java.io.IOException: Error from fcntl() for file locking, Resource temporarily unavailable, errno=11I think this indicates that either the file was either locked (because another instance of WebLogic had it opened), or that the file was unavailable for some reason. WebLogic locks files as a safety precaution to prevent misconfigured setups (multiple domains sharing the same directory and store name) from attempting to share the same file.
I don't think that this message necessarily means there is a file corruption.
As for rotation, the file store automatically adds new files as needed (I think its 1 file for every 2GB of data). The "diagnostics" file store is generated by the optional diagnostics feature, and I think that this feature has options for controlling the amount of stored data.
Tom -
Re: [SunONE-JATO] Re: Using an object to store and display data
Personally, I think there is little or no value to creating a "domain"
object that itself relies on a JATO QueryModel internally, but hides that
fact and requires use of BeanAdapterModel.
It would be more appropriate (and much less work, and more scalable) to just
derive a QueryModel subclass and add the domain-specific behavior to the
model. In other words, what's the point of creating an object that hides
JATO inside it when you're running in JATO to begin with? Now if the domain
object were doing plain JDBC, and thus trying to be JATO independent, that
would be different. However, you could still implement the Model interface
on the object (or use BeanAdapterModel) to integrate it seamlessly with the
View tier.
Todd
----- Original Message -----
From: "grschroeder" <grschroeder@y...>
Sent: Wednesday, July 31, 2002 12:00 PM
Subject: [SunONE-JATO] Re: Using an object to store and display data
Craig,
I think it all finally makes sense. First, your assumption is
correct regarding the process flow. The ViewBean will interact with
a custom Javabean which will then in turn interact with a SQL Model
to access the database. So now let me make sure I understand what I
need to do. Basically the custom Javabean will have a method to get
the SQLModel. I would then invoke the setValue method on the
SQLModel and call the appropriate execute method( e.g.,
executeUpdate, etc. ) just like I would do from a ViewBean. Does
this sound correct?
Thanks,
Greg
--- In SunONE-JATO@y..., "Craig V. Conover" <craig.conover@s...>
wrote:
Greg,
see below...
grschroeder wrote:
Thanks for the help Craig. I looked at the sample code that makes
use of the BeanAdapterModel. Basically it looks like it allows a
view to interact with a bean the same way it would interact with
any
other model. That part I think I understand.
This is correct.
The part I'm a little
unclear on still is how to interface this BeanAdapterModel( which
is
a very basic model ) that I now have with a query model toactually
interact with the database.
Not sure what you mean by "interface this BeanAdapterModel ... witha
query model". Does this mean that you have a ViewBean the interactswith
a custom JavaBean via the BeanAdpterModel wrapper, and from the
JavaBean you are interacting with the SQL Model?
So it looks like this: ViewBean > BeanAdapterModel(Custom JavaBean)
SQL Model > RDBMS
That's what I am reading anyway. Please explain this to me.
Would I need to make direct JDBC calls
from my custom model instead of letting JATO dynamically create
the
calls for me?
If my assumptions above are correct, then the custom JavaBean cansimply
use the SQL Model in exactly the same manner as the ViewBean,otherwise,
if no SQL Model is involved, then yes, you need to handle JDBCdirectly,
which is fine, if you do it "right" (connection pooling, result set
handling, etc.).
Thanks,
Greg
--- In SunONE-JATO@y..., "Craig V. Conover" <craig.conover@s...>
wrote:
I think the best approach would be to treat your Domain Objects
(DO) as
the Database (the enterprise tier) from JATO's perspective. You
could
create custom models that interface with our DO's and then the
JATO
Views could easily bind to the custom DO models just like anyother
model. This should eliminate the need for pushing data/objectsfrom
>
view
to model to database.
There is a JATO class called BeanAdapterModel that might be just
what
you need, however, I am not experienced with using it. Maybe
someone
else on my team or in the community could better explain how to
use
>
this
class.
craig
grschroeder wrote:
Venki,
Thanks for the response. Actually, I'm not sure if I can answer
all
of your questions because those are some of the same questions
that
we're trying to answer ourselves. Basically, what we're trying
to
>do
is incorporate our domain object model into the JATO framework.
My
thinking was that one way we could accomplish this was by
storing
>a
Javabean object in the HTTPSession to represent an object in the
domain model, and that the Viewbean and JATO Model could get and
set
data from there. If you have a better suggestion of how to
accomplish this, I'm definitely open to hearing it.
Thanks,
Greg
--- In SunONE-JATO@y..., Venki <heyvenki@y...> wrote:
OK grschroeder , first let me get this straight:
0. Are you going to pass this object to the model, or are u
going
>
to pass the session object to the model?
1. Is there any specific reason for this approach you are
taking?
2. Will there be a notification from the object u havementioned
>to
have the model persist the data?
3. What about the reverse case, when the model refreshes the
data,
how are you going to refresh you object?
4. The JavaBean Object that u are talking about, is it your own
object or is it implementation of an existing JATO interface?
~Venki
grschroeder wrote:I'm fairly new to JATO, but I think I now
have
>a
basic understanding
of how Viewbeans and Models interact. However, I want to
incorporate
the use of a Javabean object that will be stored in the HTTP
session
and will act as the connection between the Viewbean and Model
instead
of having the Viewbean and Model interact directly with each
other.
Basically I would like to have the Model set data in the object
stored in the session so that the Viewbean can pull it out to
display
it. And vice versa, once the user modifies the data and is
ready
>
to
persist it, I would like to have the Viewbean set data in the
object
stored in the session so that the Model can pull it out to
store
>it
in the database. I'm not sure what the best approach would be
to
accomplish this. Any help you could give would be greatly
appreciated.
Thanks,
Greg
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
Service.
Venki
IT Solutions
#6, Pycrofts Garden Road, Nugambakkam, Chennai - 600 006
91-44-4925740(Home) 91-44-8212877(Work)
* Luck is what happens when Preparation meets Opportunity.
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
>To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jspPersonally, I think there is little or no value to creating a "domain"
object that itself relies on a JATO QueryModel internally, but hides that
fact and requires use of BeanAdapterModel.
It would be more appropriate (and much less work, and more scalable) to just
derive a QueryModel subclass and add the domain-specific behavior to the
model. In other words, what's the point of creating an object that hides
JATO inside it when you're running in JATO to begin with? Now if the domain
object were doing plain JDBC, and thus trying to be JATO independent, that
would be different. However, you could still implement the Model interface
on the object (or use BeanAdapterModel) to integrate it seamlessly with the
View tier.
Todd
----- Original Message -----
From: "grschroeder" <grschroeder@y...>
Sent: Wednesday, July 31, 2002 12:00 PM
Subject: [SunONE-JATO] Re: Using an object to store and display data
Craig,
I think it all finally makes sense. First, your assumption is
correct regarding the process flow. The ViewBean will interact with
a custom Javabean which will then in turn interact with a SQL Model
to access the database. So now let me make sure I understand what I
need to do. Basically the custom Javabean will have a method to get
the SQLModel. I would then invoke the setValue method on the
SQLModel and call the appropriate execute method( e.g.,
executeUpdate, etc. ) just like I would do from a ViewBean. Does
this sound correct?
Thanks,
Greg
--- In SunONE-JATO@y..., "Craig V. Conover" <craig.conover@s...>
wrote:
Greg,
see below...
grschroeder wrote:
Thanks for the help Craig. I looked at the sample code that makes
use of the BeanAdapterModel. Basically it looks like it allows a
view to interact with a bean the same way it would interact with
any
other model. That part I think I understand.
This is correct.
The part I'm a little
unclear on still is how to interface this BeanAdapterModel( which
is
a very basic model ) that I now have with a query model toactually
interact with the database.
Not sure what you mean by "interface this BeanAdapterModel ... witha
query model". Does this mean that you have a ViewBean the interactswith
a custom JavaBean via the BeanAdpterModel wrapper, and from the
JavaBean you are interacting with the SQL Model?
So it looks like this: ViewBean > BeanAdapterModel(Custom JavaBean)
SQL Model > RDBMS
That's what I am reading anyway. Please explain this to me.
Would I need to make direct JDBC calls
from my custom model instead of letting JATO dynamically create
the
calls for me?
If my assumptions above are correct, then the custom JavaBean cansimply
use the SQL Model in exactly the same manner as the ViewBean,otherwise,
if no SQL Model is involved, then yes, you need to handle JDBCdirectly,
which is fine, if you do it "right" (connection pooling, result set
handling, etc.).
Thanks,
Greg
--- In SunONE-JATO@y..., "Craig V. Conover" <craig.conover@s...>
wrote:
I think the best approach would be to treat your Domain Objects
(DO) as
the Database (the enterprise tier) from JATO's perspective. You
could
create custom models that interface with our DO's and then the
JATO
Views could easily bind to the custom DO models just like anyother
model. This should eliminate the need for pushing data/objectsfrom
>
view
to model to database.
There is a JATO class called BeanAdapterModel that might be just
what
you need, however, I am not experienced with using it. Maybe
someone
else on my team or in the community could better explain how to
use
>
this
class.
craig
grschroeder wrote:
Venki,
Thanks for the response. Actually, I'm not sure if I can answer
all
of your questions because those are some of the same questions
that
we're trying to answer ourselves. Basically, what we're trying
to
>do
is incorporate our domain object model into the JATO framework.
My
thinking was that one way we could accomplish this was by
storing
>a
Javabean object in the HTTPSession to represent an object in the
domain model, and that the Viewbean and JATO Model could get and
set
data from there. If you have a better suggestion of how to
accomplish this, I'm definitely open to hearing it.
Thanks,
Greg
--- In SunONE-JATO@y..., Venki <heyvenki@y...> wrote:
OK grschroeder , first let me get this straight:
0. Are you going to pass this object to the model, or are u
going
>
to pass the session object to the model?
1. Is there any specific reason for this approach you are
taking?
2. Will there be a notification from the object u havementioned
>to
have the model persist the data?
3. What about the reverse case, when the model refreshes the
data,
how are you going to refresh you object?
4. The JavaBean Object that u are talking about, is it your own
object or is it implementation of an existing JATO interface?
~Venki
grschroeder wrote:I'm fairly new to JATO, but I think I now
have
>a
basic understanding
of how Viewbeans and Models interact. However, I want to
incorporate
the use of a Javabean object that will be stored in the HTTP
session
and will act as the connection between the Viewbean and Model
instead
of having the Viewbean and Model interact directly with each
other.
Basically I would like to have the Model set data in the object
stored in the session so that the Viewbean can pull it out to
display
it. And vice versa, once the user modifies the data and is
ready
>
to
persist it, I would like to have the Viewbean set data in the
object
stored in the session so that the Model can pull it out to
store
>it
in the database. I'm not sure what the best approach would be
to
accomplish this. Any help you could give would be greatly
appreciated.
Thanks,
Greg
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
Service.
Venki
IT Solutions
#6, Pycrofts Garden Road, Nugambakkam, Chennai - 600 006
91-44-4925740(Home) 91-44-8212877(Work)
* Luck is what happens when Preparation meets Opportunity.
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
>To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp -
I have purchased an new PC since my oriiginal PC crashed after 5 years of use. I want to transfer my iTunes files from my iPAD and iPOD to my new PC.
How do you transfer files (Music/books/pictures) from an iPAD or iPOD device to an new PC that has iTunes, but no data of filesThe text below is copied from this discussion.
https://discussions.apple.com/message/11527071#11527071
Authorize your new computer's iTunes first - Store>Authorize this computer.
1) Without connecting your iPad to your laptop, start iTunes. Click on Edit. Click on Preferences. Click on Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
2) Now connect your iPad to your laptop and start iTunes.
3) When iTunes starts, right click on your iPad under Devices in the left column. Select Transfer purchases etc.
4) After it finishes transferring all your apps to your new laptop, right click on your iPad and select Backup your iPad.
5) After it finishes backing up your iPad, right click on your iPad and select Restore etc.
6) After it finishes restoring, left click on your iPad , then click on the Apps tab on top, and check the box next to Sync Apps, then click on Apply below.
If everything on your iPad looks good after the sync, go back and click on Edit / Preferences / Devices and UN-check the box next to Prevent your iPod etc. The only other thing you may want to check is if your contacts, bookmarks, etc. are syncing correctly now. If not, go to the Info tab after connecting and make sure you indicate which features you want to sync with what sources.
This discussion has much of the same information and even some more helpful tips.
https://discussions.apple.com/thread/3305461 -
How do you store parsed XML data in an array
Hi, i am trying to complete a small program which implements the SAX parser to parse an XML file. My problem is that i am writing a custom class to store the parsed data into an array, and then make the array available to the main program via a simple method which returns the array. I know this must be very simple to do, but i seem to have developed a mental block with this part of the program. I can parse the data and print all the elements to the screen, but i just cant figure out how to store all the data elements into the array. I will post the class which is supposed to do this, and ask anyone out there if they know what i'm doing wrong, and also, if there is a more effeicient way of achieving this ( i expect there definitely is!! but i have never used the SAX parser before and am getting confused by the API docs on it!!) Any help very much appreciated.
Here is my attempt at coding the class to handle the parsed XML data
class Sink extends org.xml.sax.helpers.DefaultHandler
implements org.xml.sax.ContentHandler{
Customer[] customers = new Customer[20];
int count = 1;
int x = 0;
int tagCount = 0;
String name;
String custID;
String username;
String address;
String phoneNum;
public void startElement(String uri, String localName, String rawName, final org.xml.sax.Attributes attributes)throws org.xml.sax.SAXException{
//count the number of <name> tags in the XML file
if(rawName.equals("name")){
tagCount++;
public void characters(char[] ch, int start, int len){
//get the current string
String text = new String(ch, start, len);
String text1 = text.trim();
//there are 5 elements for each customer found in the XML file so when the count reaches 6
// i reset this to 1
if(count == 6){
count = count - 5;
if(text1.length()>0 && count == 1){
name = text1;
System.out.println(name);
}else{
if(text1.length()>0 && count == 2){
custID = text1;
System.out.println(custID);
}else{
if(text1.length()>0 && count == 3){
username = text1;
System.out.println(username);
}else{
if(text1.length()>0 && count == 4){
address = text1;
System.out.println(address);
}else{
if(text1.length()>0 && count == 5){
phoneNum = text1;
System.out.println(phoneNum);
//add data to the customer array
customers[x] = new Customer(name, custID, username, address, phoneNum);
// increment the array index counter
x = x+1;
}//end of if
}//end else
}//end else
}//end else
}//end else
}//end of characters method
public void endDocument(){
System.out.println("There are " + tagCount +
" <name> elements.");
}//end of class Sink
Before the end of this class i also need to make the array available to the calling program!!
Any help would be much appreciated
Thanks
IainOk, yer going about this all the wrong way. You shouldn't have to maintain a count of all the elements. Basically you are locking yourself into the XML tags not only all being there but are assuming they are all in the same order. What you should do is in your characters() method, put all of the characters into a string buffer. Then, in endElement() (which you dont use btw, you should) you grab the information that is in the string buffer and store it into your Customer object depending on what the tagName is.
Also, you should probably use a List to store all the Customer objects and not an single array, it's more dynamic and you arent locked into a set number of Customers.
I wont do it all for you, but I'll give you a good outline to use.
public class CustomerHandler extends DefaultHandler {
private java.util.List customerList; // List of Customer objects
private java.util.StringBuffer buf; // StringBuffer to store the string of characters between the start and end tags
private Customer customer; // Customer object that is initialized with each entry.
public CustomerHandler() {
customerList = new java.util.ArrayList(); // Initialize the List
buf = new java.util.StringBuffer(); // Initialize the string buffer
// Make your customer list available to other classes
public java.util.List getCustomerList() {
return customerList;
public void startElement(String nsURI, String sName, String tagName, Attributes attributes) throws SAXException {
// Clear the String Buffer
// If the tagName is "Customer" then create a new Customer object
public void characters(char[] ch, int start, int length) {
// append the characters into the string buffer
public void endElement(String nsURI, String sName, String tagName) throws SAXException {
// If the tagName is "Customer" add your customer object to the List
// Place the data from the String Buffer into a String
// Depending on the tagName, call the appropriate set method on your customer object
}
Maybe you are looking for
-
I am getting error messages on several different pages that my cookies are blocked but checking the Tools - Options - Privacy accept cookies and accept 3rd party cookies are both enabled and the web sites are not listed under the exceptions button ==
-
StartSQLRepository export command gives ClassNotFoundException
I am trying to export repository using startSQLRepository but it gives me NoInitialContextException. I tried the following command to export the repository. startSQLRepository -m motorpriseJSP -repository /atg/commerce/catalog/ProductCatalog -expor
-
Milestone Billing & Progress Analysis
Hello Experts, We are implementing PS for a manufacturing client where the client opting for a milestone billing as well the tracking of the progres of the project from the milestone for percentage billing processed, as have not come across this scen
-
Third Party MPEG2 encoder - Suggestions
So I recently upgraded to a new MacBook Pro. Everything's great except that the version of DVDSP 3 that I have won't work with it and neither will the version of Compressor that came along with it. (I upgraded from a G4 iMac.) Can anyone suggest a go
-
How can I retrive the password of Wiresless
Dear All, I am useing OralceAS 10g. After open this URL:http://server:7777/webtool/login.uix.......try to login an error occurs. Error: Your password has expired. Please contact administrator to reset it. how can i recover it.Please it very urgent. T