Reset a select-person field?

Reset a select-person field?
We have a couple services where depending on the option chosen, a select person field appears and is mandatory. If they select a person, the form fields are populated. But when the customer changes to another option where the select person field is not needed. The problem arises...normally, I would hide the field and clear the vaules. But the value in a select person field is held by the information choosen from the Select Person Popup window.
Any help would be appreciated.
Thanks.

Hi Tylor,
Have you used ISF or DDRs in RC 2008 to be able set a Person-type field using a set or look-up? I'm doing some noodling now to try and determine that and saw this article. Looking at your comments above, you seem familiar with the person type fields! Any advice you could give would be appreciated.
I've tried setting the value to the RC database Person ID based on your comments above using DDR but with no luck. We're trying to hook in to a remote Identity Management database to d

Similar Messages

How to hide the select-options fields on radiobutton select in webdynpro

hi
Could you please help how to hide the select-option fields in webdynpro
there are four radio buttons
for every radiobutton there is corresponding the select_option filed is associated to it
user as only provision select one radio button and reset of the select-option fileds should be hidden
which ever the radio button is selected corresponding the select-options fileld should be displayed
please find the attachement below

Hi Nine,
To hide select options you should use interface method REMOVE_SELECTION_SCREEN_ITEM of IF_WD_SELECT_OPTIONS.
Sample code :
Write the below code in the Event handler of Radio Button.
DATA lv_r_helper_class TYPE REF TO if_wd_select_options.
lv_r_helper_class = lo_interfacecontroller->init_selection_screen(
lv_r_helper_Class->REMOVE_SELECTION_SCREEN_ITEM(exporting i_id = 'Select_option1_id1').
This will hide first select option of your screen.Similarly pass select_option_id2 to hide it and so on.
Regards,
Ravikiran.k

Powershell How to get person field display name

I am running the following ps script to get some data out to csv. The person fields (AssignedTo and CreatedBy) come with index;#LastName, FirstName. How do just get the name without the index stuff. Or do I need to do a Regex or Replace? For example,
32;#Doe, John Should be Doe, John
$results = @()
$web = Get-SPWeb "http://ourlocal.company.cc/docs/sales"
$list = $web.Lists["Sales Tasks"]
$caml = '<Where><Eq><FieldRef Name="Status" /><Value Type="Choice">Completed</Value></Eq></Where>'
$query=new-object Microsoft.SharePoint.SPQuery
$query.Query=$caml
$ListItems=$list.GetItems($query)
Write-Host "count " $ListItems.Count
foreach ($item in $listItems)
$Title = $item["Title"]
$AssignedTo = $item["AssignedTo"]
$Status = $item["Status"]
$Priority = $item["Priority"]
$CreatedBy = $item["Created By"]
$out = new-object psobject -Property @{Title = $Title
AssignedTo = $AssignedTo
Status = $Status
Priority = $Priority
"Due Date" = $DueDate
"Percent Complete" = $Percent
"Created by" = $CreatedBy}
$out = $out|select-object Title, AssignedTo, Status, Priority, "Due Date", "Percent Complete", "Created by"
$results +=$out
$results | Export-Csv "c:\output.csv" -noType
$web.Dispose()

Step 1:
Add following code right after $CreatedBy=$item["Created By"]
$CreatedByUserObj = New-Object Microsoft.SharePoint.SPFieldUserValue($web, $CreatedBy)
$CreatedByDisplayName = $CreatedByUserObj.User.DisplayName;
Step 2:
Replace "Created by" = $CreatedBy with following code
"Created by" = $CreatedByDisplayName

Contact Person Field

Hi :
How to setup contact person of customer master as optional field when creating the customer data in IMG?

Hi,
Goto OBD2 and Select 0001 account group.
In below you can find Field status tab under that double Click on General data and Double click on contact person click on Optional radio button and Save the screen.
Now you can create the Customer with optional contact person Field.
Regards
raj.

Allow users to create reports based on their own selection of fields

Is there a way to allow users to create reports based on their own selection of fields?
And if there is a way, then how?
In access we retrieve all demographic info on one screen and on another screen user can be able to choose specific fields from a list box to import data into file.

Hi,
This can be handled in various ways - but the principles are the same.
You need to apply conditional displays to all of the columns that your user can select and base the display of a column on the value of a field on the page.
You can have a series of Yes/No options - one for each field and base the display on the corresponding field being Yes. Or you can use checkboxes.
However, if you wish to use a multiselect list (which is probably easier as you can dynamically generate the list of field names), you will need to have hidden fields that will store either Y/N or 1/0 (I use ones/zeros) and have the conditional displays watch these fields instead. Populating these hidden fields is a bit more tricky than just having fields on the page that the user can control, but is doable:
1 - Create one hidden field for each field in the report that you want to show/hide. Put these fields in the same region as the select list in a region above the report
2 - Set conditional display values to "Value of Item in Expression 1 = Expression 2" and use the appropriate hidden field for Expression 1 and in Expression 2 enter in 1
3 - Create a page process that runs on submit, and create PL/SQL code something like:
DECLARE
lFields HTMLDB_APPLICATION_GLOBAL.VC_ARR2;
vField VARCHAR2(1000);
BEGIN
:P31_SHOW_EMPNO := 0;
:P31_SHOW_ENAME := 0;
:P31_SHOW_JOB := 0;
:P31_SHOW_MGR := 0;
:P31_SHOW_HIREDATE := 0;
:P31_SHOW_SAL := 0;
:P31_SHOW_COMM := 0;
:P31_SHOW_DEPTNO := 0;
lFields := HTMLDB_UTIL.STRING_TO_TABLE(:P31_FIELDS);
FOR i IN lFields.FIRST..lFields.LAST LOOP
vField := lFields(i);
IF vField = 'EMPNO' THEN
:P31_SHOW_EMPNO := 1;
ELSIF vField = 'ENAME' THEN
:P31_SHOW_ENAME := 1;
ELSIF vField = 'JOB' THEN
:P31_SHOW_JOB := 1;
ELSIF vField = 'MGR' THEN
:P31_SHOW_MGR := 1;
ELSIF vField = 'HIREDATE' THEN
:P31_SHOW_HIREDATE := 1;
ELSIF vField = 'SAL' THEN
:P31_SHOW_SAL := 1;
ELSIF vField = 'COMM' THEN
:P31_SHOW_COMM := 1;
ELSIF vField = 'DEPTNO' THEN
:P31_SHOW_DEPTNO := 1;
END IF;
END LOOP;
END;
4 - Finally, add a button that generates the report - this just needs to submit the page and branch back to the same page
I've used the standard EMP table for this example and my hidden fields are P31_SHOW_fieldname. The code resets the hidden fields to 0, checks if the user has selected the field from the list (P31_FIELDS) and changes the hidden fields value to 1 for all those selected. When the page is re-rendered, the report hides the columns where the hidden field value is 0 and displays those where it is 1. The export option will then only export those fields that are displayed.
You can see an example of this here:
http://htmldb.oracle.com/pls/otn/f?p=33642:31
Regards
Andy

Truncation of selection screen field in reports

Hi,
Is there any way to avoid truncation of selection screen fields in ABAP reports? For eg, I declare:
SELECT-OPTIONS: s_test FOR ztest-test_field NO INTERVALS
The length of this field in the table is 30 chars. However, on displaying the field via selection screen, this gets truncated to around 18 or so. How do I avoid this as I need to display the full length of the field?

Hi,
Try this
Tables : makt.
select-options maknr for makt-maktx.
now go to the screen painter of your program in change mode and move the Help buttons first to the Right each. now increasethe length of the Matnr Field length so that they are equal to 40 Char. in your program you have handle the length now if you want to restrict to 18 otherwise it will be ok
if they don't fit you need incease the Size of the Screen Visible area both in the Screen Painter as well as in the
Screen Attributes
You also get an Information Message just ignore that.
Just open your program in SE80 if you can't go to the screen painter in SE38. the other way just keep this program in Display mode and execute then take F1 help , take Technical Information and double click on the Screen number now go to the Screen Layout and go to Change mode here.
Regards,
Shirisha

Regarding Search help on selection-screen field

Hi there,
I am working on custom tables.
I have a requirement to maintain search pattern on a selection-screen field.
selection-screen parameter: p_name which is company name filed from Z table.
By giving a string like Holl* and by pressing F4 on the field p_name it has to popup a dialogbox having list of company names starting with Holl.
Thanks in advance.
-Tulasi

Hi
Go through the link given below :
How to create a search help for my own fields in selection screen
F4 search help on report selection screen
also try :
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
RETFIELD = 'VKORG'
PVALKEY = ' '
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
DYNPROFIELD = 'P_VKORG'
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
VALUE_ORG = 'C'
TABLES
VALUE_TAB = T_TABLE1
FIELD_TAB = field_tab
RETURN_TAB = RET_TAB
DYNPFLD_MAPPING = DYN_TAB
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
With Regards
Nikunj shah

Selection screen field problem

Hello experts..
i have a selection screen , in that i have a field   s_bwart for mseg-bwart.
some times the user will input the data in the field and sometimes he wont. we have fixed movement types combination like
11-21 , 13-24 , 13-56 , 101-543 , 101-544 etc.
if the user did not input any thing in the selection screen , i am populating s_bwart in at-selection screen event with all the mvt types. after executing the report when user presses the back button to come to the selection screen, there the s_bwart field is containing all the mvt types in single values ie in the select options screen. So the user dont want that, if he comes back nothing should be there in the selection screen field s_bwart if he has not inputted anything. if he inputs only 11 mvt type then when he comes back after executing the report he should see only 11 in the select screen field ie s_bwart. Please send the replies on how to solve the problem.

hi,
in ur program try to display values for users in START-OF-SELECTION event as it triggers after the selection screen displayed for users. if user doesn't give any input then display default values in this event. and also create a variable
for ex:
data: ws_flag type c,
         p_value type i.
after u display default values for users in selection screen assign the flag as ' X '
ws_flag = 'X'.
before leaving ur program based on flag try to do like this.
if ws_flag = ' X '.
    clear s_data. // s_data is the select options for u.
else.
     s_data = p_value. // the value which user gave in selection screen as i/p.
endif.
if helpful reward some points.
with regards,
Suresh Aluri.

Regarding Selection-Screen Field Display

Hi All,
I have issues with Selection-Screen field display.
The Actual issue is i had declared a selection screen field as: s_exgen FOR embk-exgen.
EMBK-EXGEN is actually 20 Char length field.
But in output display it is being shown as 18 Char field though i can type in all 20 characters.
But display restricted to 18 Characters only.
Can anybody give me the solution for the same!
Thanks in advance.
Thanks & Regards,
Prasad.

Hi,
You can decrease the visible length of the field but you can not increase more than database field length. check SAP help on this :
select-options: s_exgen FOR embk-exgen VISIBLE LENGTH 5.
... VISIBLE LENGTH vlen
Effect
This addition allows you to shorten the visible length of the corresponding screen field on the selection screen to vlen.
Variant 2
SELECT-OPTIONS sel FOR (f).
Additions as in variant 1.
Effect
In this variant, (f) must be a field containing the name of the actual reference field at runtime. The system creates the LOW and HIGH fields as character fields with length 45. However, their appearance on the selection screen is inherited from the reference field whose name is contained in field f at runtime.
Regards
Appana

Selection screen fields

Hi,
I want to group the selection screen fields. where should i group.
I want to group using the modif Id
T Y P E S
TYPES:
BEGIN OF TYVBAK,
VBELN TYPE VBAK-VBELN,
AUART TYPE VBAK-AUART,
AUDAT TYPE VBAK-AUDAT,
KUNNR TYPE VBAK-KUNNR,
NETWR TYPE VBAK-NETWR,
END OF TYVBAK.
D A T A      D E C L A R A T I O N S
DATA:
STVBAK TYPE TYVBAK,
ITVBAK TYPE TABLE OF TYVBAK.
S E L E C T I O N    S C R E E N
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS:
SKUNNR FOR STVBAK-KUNNR.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-002.
SELECT-OPTIONS:
SVBELN FOR STVBAK-VBELN,
SAUDAT FOR STVBAK-AUDAT.
SELECTION-SCREEN END OF BLOCK B2.
I N I T I A L I Z A T I O N
*INITIALIZATION.
FILLING SELECT OPTIONS WITH DEFAULTS
SKUNNR-SIGN = 'I'.
SKUNNR-OPTION = 'BT'.
SKUNNR-LOW    = '1'.
SKUNNR-HIGH   = '4000000'.
APPEND SKUNNR.
T O P   O F P A G E
TOP-OF-PAGE.
WRITE:/1'SALES DOC',12 'DOC TYPE',20 'SALES DATE',32 'NETWORTH',60 'CUSTOMER'.
*A T   S E L E C T I O N    S C R E E N    O U T P U T .
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF SCREEN-NAME = 'SVBELN-LOW'.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
IF SCREEN-NAME = 'SVBELN-HIGH'.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
where should i group SBVELN and SAUDAT

Hi
Instead of SCREEN-NAME use SCREEN-GROUP1 and for your select options give MODIF ID.
As follows
SELECTION-OPTIONS: selcrt for dobj MODIF ID MOD1.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
CHECK SCREEN-GROUP1 = 'MOD1.
SCREEN-REQUIRED = 1.
MODIFY SCREEN.
ENDLOOP.
This is COZ when you use select-options you get TWO fileds on the INPUT screen LOW and HIGH so you have to check for selcrit-low and selctri-high you can avoid all this my assigning a MODIF ID.
See this sample programs for this
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: pa_file TYPE rlgrap-filename MODIF ID abc,
pa_lifnr TYPE lfa1-lifnr MODIF ID abc,
pa_vkorg TYPE vbak-vkorg MODIF ID abc.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS: pa_kunnr TYPE vbak-kunnr MODIF ID def.
SELECT-OPTIONS: s_lifnr FOR gs_lfa1-lifnr MODIF ID def,
s_date FOR gs_lfa1-erdat MODIF ID def,
s_augru FOR gs_vbak-augru MODIF ID def,
s_vbeln FOR gs_vbak-vbeln MODIF ID def.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pa_upd RADIOBUTTON GROUP g1 USER-COMMAND uc01 DEFAULT 'X'."#EC *
SELECTION-SCREEN COMMENT 3(60) text-004 FOR FIELD pa_upd.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pa_rep RADIOBUTTON GROUP g1 ."#EC *
SELECTION-SCREEN COMMENT 3(60) text-005 FOR FIELD pa_rep.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b3.
IF pa_rep EQ gc_x.
LOOP AT SCREEN.
IF screen-group1 = gc_abc.
screen-input = gc_zero_num.
ELSEIF screen-group1 = gc_def.
screen-active = gc_one_num.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ELSEIF pa_upd EQ gc_x.
*For Reprocessing
LOOP AT SCREEN.
IF screen-group1 = gc_def.
screen-input = gc_zero_num.
ELSEIF screen-group1 = gc_abc.
screen-active = gc_one_num.
ENDIF.
MODIFY SCREEN.
CLEAR pa_upd.
ENDLOOP.
ENDIF.
REPORT zrich_001.
PARAMETERS: p_rad1 RADIOBUTTON GROUP grp1 DEFAULT 'X'
user-command chk,
p_rad2 RADIOBUTTON GROUP grp1.
SELECT-OPTIONS: s_datum1 FOR sy-datum MODIF ID d1,
s_datum2 FOR sy-datum MODIF ID d2.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF p_rad1 = 'X'
AND screen-group1 = 'D2'.
screen-active = '0'.
ENDIF.
IF p_rad2 = 'X'
AND screen-group1 = 'D1'.
screen-active = '0'.
ENDIF.
MODIFY SCREEN.
ENDLOOP

How to schedule the background job using current selection screen field val

Hello Friends,
How to schedule the background job using current selection screen field values.
after completion of the job the spool should be sent as a mail to SAP Inbox.
Is there any way to create the variant dynamically by reading the current selection screen values.
Thanks,
Ravi

Hi,
To get the variant details you can use teh following FM.
'RS_VARIANT_CONTENTS'.
Regards,
Ankur Parab

F4 Help for the selection screen field

Hi Gurus,
I have to display F4 help for a selection screen field. i am using following code:
    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
         EXPORTING
              retfield        = 'CODE'
              dynpprog        = lw_repid
              dynpnr          = sy-dynnr
              VALUE_ORG       = 'S'
         TABLES
              value_tab       = gi_text
             field_tab       = li_fields_tab
              return_tab      = pi_return_tab
         EXCEPTIONS
              parameter_error = 1
              no_values_found = 2
              OTHERS          = 3.
My internal table gi_emp has two fields CODE & TEXT. When i select 1 particular value, it returns the CODE value in the pi_return_tab table.
But my requirement is i have to capture the corresponding TEXT value for the Returned CODE. Ex: following is the F4 help being displayed: -
001    test
001    test1
but is i select code 001(First Value), i also need to capture it's corresponding Text value. In return table pi_return_tab i have only Code value.
Please help me out.
Note: Based on return code i can't search into the internal table gi_code, because as shown in the example, code has multiple text.

Sachin,
I think this is what you need. The following code will return the key and the text (OR any other columns), if both columns are in the selection screen the selected values (both columns) will also be passed to the corresponding parameters. If you only need the text to be in the return table and not passed to the selection screen then set the parameter for text with NO-DISPLAY option.
REPORT zktest01 .
DATA :
BEGIN OF value_tab OCCURS 0,
    field LIKE e070-trkorr,
    text   LIKE e07t-as4text,
END OF value_tab.
DATA: t_fldtab LIKE dfies OCCURS 0 WITH HEADER LINE,
      t_rettab LIKE ddshretval OCCURS 0 WITH HEADER LINE,
      t_dynmap LIKE dselc OCCURS 0 WITH HEADER LINE.
PARAMETERS : p_field LIKE value_tab-field,
             p_text   LIKE value_tab-text. "NO-DISPLAY.
INITIALIZATION.
t_fldtab-tabname   = 'VALUE_TAB'.
t_fldtab-fieldname = 'FIELD'.
t_fldtab-langu     = 'E'.
t_fldtab-position = 1.
t_fldtab-offset    = 0.
t_fldtab-fieldtext = 'Key'.
t_fldtab-reptext   = 'Key'.
t_fldtab-leng      = 20.
t_fldtab-intlen    = 20.
t_fldtab-outputlen = 20.
t_fldtab-datatype = 'CHAR'.
t_fldtab-inttype   = 'C'.
t_fldtab-headlen   = 20.
t_fldtab-keyflag   = 'X'.
t_fldtab-lowercase = ' '.
APPEND t_fldtab.
t_fldtab-tabname   = 'VALUE_TAB'.
t_fldtab-fieldname = 'TEXT'.
t_fldtab-position = 2.
t_fldtab-offset    = 20.
t_fldtab-fieldtext = 'Text'.
t_fldtab-reptext   = 'Text'.
t_fldtab-leng      = 60.
t_fldtab-intlen    = 60.
t_fldtab-outputlen = 60.
t_fldtab-headlen   = 60.
t_fldtab-keyflag   = ' '.
t_fldtab-lowercase = ' '.
APPEND t_fldtab.
value_tab-field = '101'.
value_tab-text = 'dddd'.
APPEND value_tab.
value_tab-field = '202'.
value_tab-text = 'aaaa'.
APPEND value_tab.
t_dynmap-fldname = 'FIELD'.
t_dynmap-dyfldname = 'P_FIELD'.
APPEND t_dynmap.
t_dynmap-fldname = 'TEXT'.
t_dynmap-dyfldname = 'P_TEXT'.
APPEND t_dynmap.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_field.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
       EXPORTING
            retfield        = 'FIELD'
            dynpprog        = 'ZKTEST01'
            dynpnr          = '1000'
            dynprofield     = 'P_FIELD'
            value_org       = 'S'
       TABLES
            field_tab       = t_fldtab
            value_tab       = value_tab
            return_tab      = t_rettab
            dynpfld_mapping = t_dynmap
       EXCEPTIONS
            parameter_error = 1
            no_values_found = 2
            OTHERS          = 3.
IF sy-subrc EQ 0.
ENDIF.
START-OF-SELECTION.
Jeffrey Satriadi

Unable to select a field in Datasource screen

Hi Gurus,
I am trying to change a datasource by including another field (by checking the selection field) but am unable to do it as its disabled. however the hide field can be editable and is unselected at the moment.
How can i enable the selection box for this field and check it?
Thanks in advance
S N

Hi San
Thanks for your quick reply.
I have checked the field and it hasnt got any value in the SELECTION field (its just blank). Some of the other fields have got 'X'.
The OBJVERS for this particular field is A. However there is another occurance of the same field with OBJVERS as D.
Anymore suggestions as to how i can enable and select this field in my Datasource.
Thanks
S N

To transfer Selection Screen field value from a program to another Program

Hello,
Program Z_ABC having Select Option Field XYZ.
I need to transfer all the values entered on Selection Option Field XYZ to another Program Dialog Z_DIALOG.

Hi,
Try to use the function module 'RS_REFRESH_FROM_SELECTOPTIONS'.
For ex:
CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
 EXPORTING
 curr_report = sy-repid
 TABLES
 selection_table = it_soptions
 EXCEPTIONS
 not_found = 1
 no_report = 2
 OTHERS = 3.
IF sy-subrc <> 0.
 EXIT.
ENDIF.
SUBMIT riaufk20 WITH dy_selm = 'D'
 WITH SELECTION-TABLE it_soptions
 AND RETURN.
Hope it solves your issue.
Regards,
Chenthamarai.

Displaying error message while entering selection screen fields

Moderator message: don't offer points
hi experts...
i generated a report.
in that report, the selection screen fields are plant and material type..
now my rqmt is like this :
if user enters any plant except '8210' in the selection screen, then a pop up should appear like.. enter 8210 plant only, and the cursor should remain in the same screen allowing user to enter correct plant.
and then same with the case of material type also..user should enter 'mcfe' material type only..
im using message classes like this:
if so_bwkey-low ne '8210' or so_bwkey-high ne '8210'.
message i000(zts).
endif.
if so_mtart-low is not initial and so_mtart-high is not initial and so_mtart-low ne 'mcfe'
or so_mtart-high ne 'mcfe'.
message i001(zts).
endif.
with this logic, when i enter plant..it is prompting
1) enter plant 8210 only..
and then when i press enter key it is again prompting
2)enter material type mcfe only..
but iam not entering material type here..
i want to get 2nd error message if and only if i enter material type..
help me regarding this issue..
<<text removed>>
thanks in advance,
harini.
Edited by: Matt on Feb 9, 2009 10:14 AM

Hi,
Use Error type message in SELECTION SCREEN EVENT.It will place the cursor in the relevant Field.
At SELECTION-SCREEN ON SO_BWKEY-Low.
if so_bwkey-low ne '8210' .
message E000(zts).
endif.
At SELECTION-SCREEN ON SO_BWKEY-HIGH.
if so_bwkey-high ne '8210'.
message E000(zts).
endif.
At SELECTION-SCREEN ON so_mtart-LOW.
if so_mtart-low is not initial and so_mtart-low ne 'mcfe' .
message E001(zts).
endif.
At SELECTION-SCREEN ON so_mtart-HIGH.
if so_mtart-high is not initial
and so_mtart-high ne 'mcfe'.
message E001(zts).
endif.
This will resolve the issue..
Regards,
Gurpreet

Reset a select-person field?

Similar Messages

Maybe you are looking for