Reset Admin password on HP Laserjet 700 color MFP M775 printer

Hello ,
Does anyone know how to reset an admin or config password on the HP 700 a default password does not work.
Thanks

Ayosanya,
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/ .
I hope this helps.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

HP CC522A - HP LASERJET 700 COLOR MFP M775DN PRINTER dimension

HP CC522A - HP LASERJET 700 COLOR MFP M775DN PRINTER dimension
This question was solved.
View Solution.

HP CC522A - HP LASERJET 700 COLOR MFP M775DN PRINTER dimension

CC524A LaserJet 700 color MFP M775 No Touch Screen

Hi Everyone,
I have an HP M775 that must only just be out of warranty, the problem I have is about a week ago the display just went dead, I am only able to print to this device all other functions are unavailable due to non-operational touch screen.
This issue has happened once before but was resolved after a power cycle, this time nothing helps.
I am reluctant to admit that the display is faulty I feel that due to its current behaviour that it seems to be in some sort of standalone limp mode.
The current operational characteristics are instant power off if button is pushed, almost instant boot up if power is turned on (able to print to device within a minute)
The device is still accessible over LAN and I can access the web based page via IP Address.
Any suggestions on how to maybe reset this device manually keeping in mind there is no screen available what so ever.
Regards,

Hello @EastPilbara,
I understand your concerns. Unfortunately, for this type of printer, I need to direct you to our Enterprise Business Community Forums. This will be the right section to troubleshoot this issue. Good luck.
I worked on behalf of HP.

Forgotten Password on HP LaserJet 100 color MFP M175NW

Hello,
I came to the comunity after a call to the heldpesk.
My problem is the following. I have a HP LaserJet 100 color MFP M175nw who is configurable via web interface. The problem is that I don't remember anymore the password to access to the web configuration.
I called HP Helpdesk in order to ask for help, but because my printer is not anymore under warranty, they can't give me support (or I have to pay...). The girl ask me to post in the forum, and that I'll get an answer this way.
So I came to you, and ask for assistance .
Can someone help me how to do?
Thanks a lot
This question was solved.
View Solution.

Hi @catharn ,
I see that you need the reset for the printer. I would be happy to help you.
I can send you that information in a private message.
In the forum beside your handle name just click on the envelope to view it.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP LaserJet 700 color MFP ME

Does anyone know if faxes can be received digitally or stored on the machine and manually printed, rather than being received and printed out automatically? When a fax is received, say overnight when the office is unattended and a paper copy is sitting there waiting for collection, if the document contains sensitive or confidential information, it compromises the privacy and security of the parties involved.Having the machine store these for secure printing or having them received in some other secure manner would be beneficial.

No worries! I found how to do this myself by looking through the admin functions. One can set faxes to be stored instead of printed

LAN settings for HP LaserJet 500 Color MFP M575: printing OK, network access NO

Printing OK but Network access NOI have a M575 in office LAN.IP 169.254.204.142Subnet 255.255.255.000Router 169.254.204.1Other computers 169.254.204.2-100Everything was good. But couple days ago I was not able to connect to my HP from browser. I was check settings and: IP address on screen HP - 0.0.0.0 I can printing on my HP!!! (destination of printing is: HPLaserJet500ColorMFPM575)but can’t to change settings. I can't change IP adres in JETDIRECT printer's menu. In command prompt PING of 169.254.204.142 is OK… Hand settings IP on start (1/8 click ), searching in administrative menu, cold reset… nothing I don’t know what I can to do else.

This is my IPConfig screen:C:\>IPConfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : T420
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Peer-Peer
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Bluetooth Network Connection 2:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network)
#2
Physical Address. . . . . . . . . : 60-D8-19-D8-A4-3B
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Ethernet adapter Local Area Connection 6:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) 82579LM Gigabit Network Connecti
on
Physical Address. . . . . . . . . : 00-21-CC-66-CA-38
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::385f:1def:62ae:8cd5%75(Preferred)
IPv4 Address. . . . . . . . . . . : 169.254.204.2(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : 29 xxxxxxxxxxx 2015 15:25:46
Lease Expires . . . . . . . . . . : 30 xxxxxxxxxxx 2015 15:25:46
Default Gateway . . . . . . . . . : 169.254.204.1
DHCP Server . . . . . . . . . . . : 169.254.204.1
DHCPv6 IAID . . . . . . . . . . . : 1610621388
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-15-69-54-50-00-1E-37-1A-5A-E8
DNS Servers . . . . . . . . . . . : fe80::5ef9:6aff:fedf:5f3b%75
169.254.204.1
169.254.204.1
NetBIOS over Tcpip. . . . . . . . : Enabled
Wireless LAN adapter Wireless Network Connection 2:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) Centrino(R) Advanced-N 6205
Physical Address. . . . . . . . . : A0-88-B4-D2-3E-B0
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 57:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft 6to4 Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{32EA8AA7-0304-411D-9B3C-9BE6D6E53F7D}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 135:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{0E880DF2-FD27-4BF8-BBD9-EA726316C1FE}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #4
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{FFBD17DC-A12B-469A-8135-C63D9BBEBB31}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #6
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
C:\>

LaserJet 100 Color MFP M175nw printing problem

When I print a page, there is a distinct area on the printed page that looks like a plastic clip or some other object is blocking the toner from transferring to the paper. It does it in both black and color. I want to know whether it is likely to beinside the toner cartridge or some other problem before I replace the cartridge. It is fairly consistent in location on the page. I printed a blank page with cover open and the image was all black except for the object that looks like a plastic clip. It is U shaped and approximately 1 inch long on each side. It looks like a large plastic staple. The platen is clean and nothing on the glass.
This question was solved.
View Solution.

Hi Goldhealey,
Welcome to the HP Forums, I hope you enjoy your experience!
I understand you are getting a mark on the page and it is consistent.
I will be happy to help you.
It could be a hardware issue with the printer or one of the toners.
I would remove each toner and inspect them for any obstructions.
Could it be possible that a paper clip fell inside the printer? Try and gently shake the printer but be careful to see if anything falls out.
Run a cleaning page through to see if that clears any obstructions.
Touch the setup button. (wrench)
Arrow to service.
Ok, then arrow to cleaning page.
Ok.
I would recommend to call HP Tech Support to inquire about a replacement printer if it is still
in warranty or find out about the trade in and trade up program.
Contact HP Worldwide.
Hope this helps.
Thank you for posting on the HP Forums. Have a great day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Laserjet 200 color mfp m276nw print black not grayscale

I'm told the printer will print even black-and-white documents using "grayscale," which I'm told means it is using the color cartridges even to print black and white documents. Is there some way I can change this so that it prints black and white documents with only the black ink cartridge? I'm using Mac.

Hi Balderol,
I understand you would like to print black only. I found a document that will help guide you through the steps to set your print settings. This document says it is for 10.3 an d10.4, but the instructions will apply to the newer Mac versions as well. Mac OS X: Printing with the Black Print Cartridge Only Option.
I hope this is helpful.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

How to scan using the Laserjet 100 color MFP m175nw printer

Hello,
My printer stopped printing suddenly so I downloaded the ePrint and it worked. . . but now I cant scan ! I dont have the option to scan.
Please help!

Hello,
Please run toHPPSdr firstly and follow the step if its show.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Im-141416-1&cc=us&dlc=en&lc=en...
If its not work may be we have to change the file name Twain_32 which located in C:\Windows
Please try and let me know if it is work or not .

HP laserjet 100 color MFP M175a printer driver to be installed evry time when the printer is made on

Hello,
I am having the above mentioned printer. The problem with this printer is every time when I switch-on the printer its driver has to be installed then only I can start printing. The following is my PC configuration:
MB: ConRoe865GV chipset, CPU: PIV, OS: XP-SP3.
Could you tell me what can the problem.
Also if by mistake the paper in the paper-tray gets finished the printer takes quite a long time to detect that new paper bunch is there in printer. Is there a way to minimise this paper checking process.
Kindly awaiting your fast reply

Hi @RajBob ,
I see that you are experiencing a issue with the printer installing every time you turn it on, then you are able to print again. Also when the paper runs out, it takes a long time to detect the paper in the tray again. I would like to help you out today.
The printer has a Smart Install built into the firmware. Disable the Smart Install Feature to see if that will resolve the issue of the computer detecting the printer every time it is turned on.
Go to Setup, Service Menu, Smart Install and turn it off please.
If you are not able to print after turning the printer back on again, download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
For the paper not being detected right away, make sure the printer is connected directly to a wall outlet and try to keep the tray filled at all times, but not over filled.
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
If you need further assistance, just let me know.
Have a great weekend!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Hp laserjet 100 color mfp m175a suddenly very slow

I have a HP LaserJet 100 color MFP M175a printer, which has always worked fine (except when in cool down mode). Suddenly, it has started printing extremely slowly - for example, last night I sent a document of 20 pages to print at around 9pm and was still waiting for it to finish at midnight!
Nothing has been changed in the settings.
What can I do to fix this?
This question was solved.
View Solution.

Thanks for letting me know NOG55.
Have you tried another USB cable? Just to rule that out.
Try and print a hardware self test on the printer to find out if it is a hardware or software issue.
On the printer select the Setup button, Reports, Config Report.
Does that print slow or fast?
If you are having this issue printing the hardware self test also, update the printer's firmware.
Software & Drivers. Select your operating system, click next, click the link for firmware.
If you are just having the issue printing from the computer, uninstall and reinstall the printer software.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Laserjet 100 color MFP M175nw cartridges?

HP Laserjet 100 color MFP M175nw Do i buy a CE310A of CE314A cartridge? where do i find a list of compatible replacement

Hi dietfit,
Welcome to the HP Support forums. I understand that you would like to learn what toner cartridges are compatible to your Laserjet 100 color MFP M175nw printer.
Please use the HP SureSupply website to help you determine which toner cartridges you need for your printer.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

LaserJet Enterprise 700 color MFP M775f

Our Company is planing to buy this Printer. and we need feedbacks about it and rating it. anyone had any issues with it while its installed
Thanks

Hi @Khodorm,
Welcome to the HP Forums!
To get your issue more exposure I would suggest posting it in the commercial forums since the HP LaserJet Enterprise 700 color MFP M775f is a commercial product. You can do this at HP Enterprise Business Community.
The support page for your product may be helpful in the meantime:
HP Support Center.
I hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Lost GlassFish admin password# how to reset admin password

Hi
i lost admin password in glassfish(     GlassFish Server Open Source Edition 3.1.1 (build 12) ) application server
key-file stored in glassfish-3.1.1\glassfish\domains\domain1\config\admin-keyfile
how i can reset admin password?

Forgot Your Account Password
For Lion, Mountain Lion, or Mavericks
    Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     When the menubar appears select Terminal from the Utilities menu.
     Enter resetpassword at the prompt and press RETURN. Follow
     instructions in the dialog window that will appear.
     Or see:
       Reset a Mac OS X 10.7 Lion Password
       OS X Mountain Lion- Reset a login password,
       OS X Mavericks- Solve password problems,
       OS X Lion- Apple ID can be used to reset your user account password.
For Snow Leopard and earlier with installer DVD
     Mac OS X 10.6- If you forget your administrator password,
     OS X- Changing or resetting an account password (Snow Leopard and earlier).
For Snow Leopard and earlier without installer DVD
    How to reset your Mac OS X password without an installer disc | MacYourself
    Reset OS X Password Without an OS X CD — Tech News and Analysis
    How To Create A New Administrator Account - Hack Mac

Reset admin password - SJSWS 7u8

Hi,
I've read through the documentation and a few of the other posts about resetting the admin password in SJSWS. Plainly, it doesn't work
[root@server bin]# ./wadm reset-admin-password --user admin --host localhost --port 8989
Please enter admin-password>
Please enter admin-password again>
CLI103 Command 'reset-admin-password' failed. :: netscape.ldap.LDAPRebindI've not been able to find any matches to the 'netscape.ldap.LDAPRebind' error, and don't know why it's talking about ldap in the first place (as SJSWS isn't attached to any LDAP).
The local machine (RHEL5.5, Linux x86_64, amd64 SJSWS install) does use LDAP for authentication, but it shouldn't be trying to touch that.
I can't find any further log entries for the failed password change either.
This is the administration console, with one other node hanging off of it.
[root@server bin]# . ../lib/wsenv ; $WS_JAVA/bin/java -version
java version "1.6.0_19"
Java(TM) SE Runtime Environment (build 1.6.0_19-b04)
Java HotSpot(TM) 64-Bit Server VM (build 16.2-b04, mixed mode)Any ideas would be welcome ;)

Unfortunately you've run into a known problem - 6914493.
Edit $(INSTALL_ROOT)/bin/wadm and add ${classpath_prefix}/ldapjdk.jar to the classpath variable and try re-running the command.

Reset Admin password on HP Laserjet 700 color MFP M775 printer

Similar Messages

Maybe you are looking for