Reset both parts of the Properties Panel

How do you reset both parts of the Properties Panel in Dreamweaver CS5?
I can see only the upper part, even if I click on two table cells to merge them together, for example.
Thanks

Thanks for your answer. Unfortunately, the tiny triangle is not visible.

Similar Messages

  • Help with the Properties Panel

    I just loaded the program and I have the Properties Panel half cut off vertical and parallel. Is there a way to reset it so I can see all of the panel?

    The link Elizabeth has posted is to an item in the Dreamweaver FAQ.
    I see that both of you are posting in the forum for the first time. Welcome. Please take a few moments to look at the FAQ. Also read How to get help quickly for some useful advice on how to get the best out of this forum.

  • I have CC and while attempting Light Effects, the Layer will appear in the layers panel, but the option bar will not appear and neither will the Properties panel. All my preferences are set correct, and my computer has a compatible video card and RAM. Ple

    I have CC and while attempting Light Effects, the Light Effects Layer will appear in the layers panel, but the option bar will not appear and neither will the Properties panel. All my preferences are set correct, and my computer has a compatible video card and RAM. Please help!
    I tried to delete the layer attempt again. I am in a Photoshop class, but the work is all online, so all my teacher is going to do is send me to this site. I am trying to edit a photo for this class, and without this working, i go to filter>render>light effects. the bar and panel will pop up for about 2 seconds, then disappear. How do i get the options bar and properties panel to display?

    I was about to suggest resetting LE from the Workspace drop-down top right corner, but if you can't see the Options Bar, I guess that is not going to happen.  The normal Tool reset is grey out for LE, so it might be a case of resetting Preferences.
    Reset Preferences
    Windows — Hold down Shift Ctrl Alt immediately after starting Photoshop
    Mac — Hold down Shift Cmd Opt immediately after starting Photoshop

  • DreamWeaver in Win7: cannpt see the Properties Panel

    Can anyone tell solution to this problem?
    I've installed Dream to Windows 7, works fine, but I cannot see the Properties Panel
    Solution is, to set Font Size in Control Panel to "Default (100%)"

    That fixed the problem - thanks!
    I did have both of those fonts ON already, but noticed that there were other versions of Tahoma and Verdana (with lower version numbers) that were OFF. I switched OFF the newer versions and switched ON the older versions of Tahoma and Verdana and the properties box was full of text, buttons, etc. just like it was supposed to be.
    I've spend hours talking with Adobe, who said it was probably a problem with my display drivers and sent me to Apple. Apple said they were no longer supporting the ATI board in my 2009 MacPro and that I would need a new computer. I told Adobe and they said they would continue working on the issue, which they have - I've received several phone calls and emails from them, but no solutions.
    How weird that running the newest versions of Tahoma and Verdana caused the problem and turning them off and using the older, Microsoft Office versions solved it. Must be a lesson here, but I don't know what that would be.
    Thanks again!

  • Where is the Properties Panel in the CS6 Camera Raw box ?

    Where is the Properties Panel in the CS6 Camera Raw box (looking for Feather slider in that panel)?

    I believe there is a Feather adjustment for both the Adjustment Brush and Effects in the 8.2 version for cs6.
    Do you have camera raw 8.2?
    Effects
    Adjustment Brush

  • I cannot get photos placed in InDesign CS5 to show up only as grayscale/black. When a separation is done, part of the photos show up on both parts of the color separation. I've been hunting for a solution for hours.

    I cannot get photos placed in InDesign CS5 to show up only as grayscale/black. When a separation is done, part of the photos show up on both parts of the color separation. I've been hunting for a solution for hours. !

    ALSO, on the iPod under Settings>General>iTunes Sync, you may need to back out of the "iTunes Wi-fi Sync," and reopen it to get it to update.
    (I use iTunes 11.1.5.5)

  • Can I turn off the Properties Panel in Photoshop CC?

    Every
    Single
    Time
    I draw a line or a shape or do almost anything it seems in PSCC, the Properties Panel jumps out. Quite rudely, it blocks the upper right of whatever I am working on. Yes, I can simply close it, but it interrupts my workflow, and it pops out constantly. This definitely did not happen in CS6 or any previous version of PS or even in the first version of PS in Creative Cloud.
    I haven't yet come across anywhere that will let me deactivate that automatic pop-out...I was hoping someone else had found it already. I would greatly appreciate some assistance!
    Thanks!!

    You 'instruct' me; I 'should' ... Imperatives, and yet it's me who has the 'attitude'.
    Your point regarding dates on the implementation is noted - apologies to those attempting to find a viable work-around with what they had available to them - but subsequent advice to deal with this by buying an extra monitor makes multiple presumptions.
    Thanks once again for your opinion on what I should do, but I came to the Adobe forum for an answer regarding an Adobe issue, by definition precisely the right place. Not to be given commands as to how I should work or spend my money by a complete stranger. There's very little helpful about the latter two points, irrespective of how you choose to define them.
    To restate my thanks:
    Thank you to Jorge and qerhqrhbwdbs for advice on how to actually deal with the problem.
    I've got more pressing things on the agenda than bickering about this, Noel, I presume you have too.

  • Color picker in the Properties panel used to work

    I have an object that I want to fill with a specific color. I click on the Fill property, choose the color picker, and type in the RGB numbers for the color. For example 240, 150, 100 for the RGB values. I get black. If I type those same color values into the new Swatches panel, I get an orange color. Has the color picker in the Properties panel stopped working?

    Jay, that is a known bug, reported it months ago and hope it will be fixed
    soon. The Color picker (picking colors) is still functional, it is only typing in of Hexadecimal codes that is not possible at this moment.

  • I can't edit a Line with the Properties panel - Flash CS4

    I have created a line on the stage with the Line tool, and then want to edit the Stroke and Style in the Properties panel. However, after creating the line these options are greyed out and not available to me. Even if I then select the Line with the Selection tool, I cannot edit the Stroke or the Style. It seems to me I should be able to do this, what am I missing?

    Normally after drawing the line you only need to click once on it to select it, and with it selected you should be able to access its settings in the properties panel.

  • I could not see Responsive Scaling on the properties panel ?

    I could not see Responsive Scaling on the properties panel ?

    Responsive scaling is available only when Stage is selected in Animate 3.0
    Select 'Stage' in the 'Elements' panel,you should see Responsive scaling option in the Properties panel

  • Dreamweaver cs5 does not show part of the properties tools...

    Hello Everyone,
    Dreamweaver cs5 does not show part of the properties tools on the bottom of the page, i.e. on HTML : TITLE and TARGET and on CSS: BOLD, ITALIC and PARAGRAPHS sections.
    I have DW CS5 and WIN 7 Home Premium 64 bit, I have uninstalled and reinstalled several times but no luck, I tried to clean through regedit still no show.
    I have onother computer installed same DW CS5 works OK.
    Is there any folders keeping the old DW CS5 files or how can I uninstall all the traces complete DW CS5.
    Thank you in advance
    Denis

    Make sure your settings are set to 96 dpi, for the font.
    desktop right click
    personalize
    change to default 96 dpi
    you will be good to go

  • How to get rid of the properties panel

    I'm not a power Photoshop user. I use it with Lightroom. I have Photoshop CC 2014. Whenever I choose levels it seems that the properties panel displays and goes the full length of my screen. It seems to me that this just started happening. If I can get it stopped then there is a minimized properties icon that displays next to my right hand panels. I don't use the properties panel as such. How can I get rid of it?

    You should not even try to get rid of it. If you ever add an adjustment layer or use actions that mayadd them you need the properties palette, 3D object also have.
    However you can hide the palette as a tab with other palettes you can also close the palette.

  • Click the add property link in the properties panel ?

    hi, iam in the css styles panel in the properties section, but i can't find the add properties link ? please help

    Hello,
    do you think about this from this forum: Styles panel missing in Dreamweaver cs6 (Was: Dreamweaver CS6)
    http://forums.adobe.com/thread/1423845 with Jon's answer (it's really working! ):
    If you are using DWCC (check under Help > About Dreamweaver to verify your version) and don't like the CSS Designer, you can get the old CSS style panel back by hitting Control + Alt (Command) + Shift +P
    Hans-Günter

  • Content By Search Web Part and the Hover Panel

    Hi
     I have an Office 365 E3 account.
    I have a Content By Search Webpart which I have added to a home page.
    I have a display template that displays the results and should show the Search hover panel just like in SharePoint Search Results.
    However, it does not unless the CSWP is near the bottom of the screen.
    I have used the IE11 debugger and I can see the hover panel code being called when the mouse enters the CSWP area, but it only works (and doers not stay visible very long) if the CSWP web part is at the bottom of the screen.
    This only works when the CSWP is at the bottom of the screen.  It does not work when the CSWP is further up the screen.
    Am I doing something wrong.
    (This works perfectly using on-premise SharePoint 2013 with SP1.)
    Regards
    Nigel
    Nigel Price NJPEnterprises

    Hi  Nigel,
    According to your description, my understanding is that the hover panel of your custom display template only works when the Content Search Web Part is at the page bottom.
    For  customizing  hover panel on the Content Search Web Part  using a Custom Display Template, you can refer to the blog:
    http://www.cdhtalkstech.com/2013/11/19/5598/
    I tested it in my SharePoint Online environment and the hover panel worked.
    For more information, you can have a look at these articles:
    http://yeshagrawal.blogspot.in/2013/06/sharepoint-2013-search-adding-hover.html
    Thanks,
    Eric
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
    contact [email protected]
    Eric Tao
    TechNet Community Support

  • How do I print a part of the front panel?

    I am interested in printing a part of my front panel as one page instead of printing the entire front panel. Does anyone know if this is possible? Thanks!

    Hi Nes,
    This is the second time you are posting a variation on this question.
    I was about to so NO YOU CAN'T...
    but then I thought...
    It is possible to print just parts of a front panel but it is a lot easier to do the things others have suggested.
    If you really want to print just a part of the FP you will have to do a lot of coding and the GUI will do some strange things in the process.
    I will outline the process and leave the code as an exercise for the reader.
    Using property nodes determine where on the FP the objects of interest are located.
    Again using property nodes, move the objects around on the FP so that they are grouped together and sized such they fit on a printed page.
    Using property nodes adjust the screen size origin etc so only
    the objects of interest are now visable.
    Using.....nodes print only the visable part of the screen.
    Using....nodes put everything back where is was when you started!
    Like I said, this is not easy.
    The simplest solution was suggested by BJD who said group the objects of interest on a tab page, use an invoke node to get the image and then display it on the FP of a sub-VI set to print on completion. That method will let you quickly add new interesting objects to the print out without having to change the sub-VI.
    Trying to help,
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

Maybe you are looking for