Reset carrier settings after changing the carrier

Hi,
I want to reset the old carrier settings under "settings -> general -> about" and remove a carrier button which was added by my old carrier under "settings -> phone". Is this possible?
Thank you very much in advance!
Kind regards
Sebastian

You should be able to make the iPhone download the new carrier settings by tapping Settings > General > About, if it's a partner carrier.
See this Apple doc for more info -> iOS: Updating your carrier settings
Additional Information
Note: If you insert a new SIM or micro-SIM card into your iPhone or iPad, you'll need to download the carrier settings for the new carrier wirelessly. Carrier settings are available only for iPhone support carriers and iPad partner carriers. If you're not using a partner carrier, you will need to set up the carrier's settings manually. Refer to your carrier for appropriate settings.
Edit: What carrier are you trying to switch to? It sounds like you'll have to update the settings manually.

Similar Messages

Need to reset prefences settings after recharging the battery

Hello,
For some reason, everytime I recharge the battery after it is completely drained, I have to reset the language, date, time, etc on my Ipod.
It dosent ever happen when I charge the battery after being only partially drained, only when it's is totally drained and recharged...
Anyone have any ideas?
Thanks!
jcop

Hi groundflight5150,
I'm attaching a link below to the user manual for the 8150B series of controllers. I don't believe that the BIOS is password protected by default, so you may want to contact the person you purchased this from to find out what the password is. However, there is information in the manual regarding how to clear out the CMOS contents, so this might help.
PXI-8150B Series User Manual
http://www.ni.com/pdf/manuals/322321a.pdf
Josh B
Applications Engineer
National Instruments

After accepting the carrier update yesterday my iPhone 5s will not receive emails via my work Exchange system.

After accepting the carrier update yesterday my iPhone 5s will not receive emails via my work Exchange system. I can send emails, but can not receive. I deleted my account and added it back with the directed provided by our Corporate IT, but I still can't receive emails. I've hard booted and soft booted my phone several times to no avail. What else can I do to help remedy this situation?

I don't have any other email accounts on my phone and I don't get any type of error message. It just says "Checking for Mail" and I receive nothing, so I know that it is accessing my work email system. I haven't made any changes to my account. I only accepted the message to update my carrier system.....I do have an appointment with the local Verizon store to see if they can help.
Just FYI, my Exchange email account still works on my iPad, so I'm pretty sure the settings are correct.

Can i use the verizon ipad 2 from US in indonesia and change the carrier

my brother bought me an iPad 2 wifi+3g from US and gave it to me in indonesia. i ccan't find the sim card slot, and when i checked out the carrier in general settings it showed verizon 10.0. can i just change the carrier? because i really want to use the 3g connections.i will really appriciate if you can help me.. sorry for my terrible english btw

You can give points by clicking on "helpful" or "correct" in the answers you like. :-)
There are CDMA networks in some parts of South Korea and Japan, I've been told, but they can't work with the iPad (someone posts that back when Verizon first offered the iPad, can't remember when). The CDMA IPad will only work with Verizon in the US.

HT201263 is it possible to undo changes to your iphone content and settings after running the restore from backup function?

is it possible to undo changes to your iphone content and settings after running the restore from backup function?

no

I do not know what I should phone is locked after changing the operating system

I do not know what I should phone is locked after changing the operating system , have the original box , receipt lost, Apple said that it is necessary to support the receipt of the first as I can not find the receipt of the first purchase when I moved to another country . I now throw my iPhone ?

It depends what you mean by 'locked' - it can mean locked by a passcode or linked only to one particular carrier (service provider). If the latter, see the post above; if it's a passcode issue:
1. Assuming this was bought new and you have set up Activation Lock and forgotten the passcode, please see this page:
http://www.lifehacker.co.uk/2011/10/24/youve-forgotten-iphones-passcode
2. If you bought it second-hand (used) - though this is not the impression I get from you post - then only the previous owner can unlock it.

HT204368 After I updated my iphone 4 to ios 6.1.3 I can no longer connect to my bluetooth plantronics model M25. I tried reset all settings after turning on and off also submitted diagnostic. Do I have to buy yet another bluetooth set?

After I updated my iphone 4 to ios 6.1.3 I can no longer connect to my bluetooth, plantronics model M25. I tried reset all settings after turning on and off also submitted diagnostic. Do I have to buy yet another bluetooth set?

Thank you wjsten for your soon reply. Unfortunately on these days I'm in a country that Apple don't have any retail store here and for sake of time I prefer to fix it myself to DHL it to the nearest country to use its warranty. Do you have any idea how can I fix it? Do you think it's a software issue?

Eversince I updated my iphone 4 to IOS 5.0.1, sometimes I get a 'No Service' or 'Searching' signal where my network signal should be upon which I have to 'Reset all Settings' to get the phone normal again.Is there a solution to this?

Eversince I updated my iphone 4 to IOS 5.0.1, sometimes I get a 'No Service' or 'Searching' signal where my network signal should be upon which I have switch the phone off then on then 'Reset all Settings' to get the phone normal again.Is there a solution to this?

I couldn't find the edit button on my original post so I am posting an update here.
I have gone through more apps and have had good luck on all but one more. And it's not that the app doesn't work, I am talking about the Yahoo Weather app, It works fine, but when you swipe between cities the screen lags a bit and it sometimes doesn't move between pages the way it should. On iOS 7.1.2 it was smooth as butter but on iOS 8.0, not so much. I will post a note in the app store to let them know. I really like the Yahoo app better than the new stock app.
I have been going through my games and they all work fine. Angry Birds (Original and Stella), Canabalt, Minecraft, Bejeweled 2, Silly Walks, PopWords, Doodle Jump, Deep Green all seem to work just fine.
Starbucks app works as it should.
I will stop back again next week after I have had the weekend to play with it in detail and post my thoughts again.

Interface getting failed after changing the Business system to that service

Hello All,
Our Env... is XI 3.0 and this is related to produciton env.
Based on our client requirment to change the business system from client 871 to 100 for one of the R3 system which is reciever type(rfc).
After doing all the necessary changes , that particular service is getting failed and in the CC monitoring for that service I can see the log as "RFC_ERROR_LOGIN_FAILURE" mandate 871 (earlier client) does not exist in the system.
The steps which I have followed to change the Business system.
1>I loged into the SLD of PRD system and clicked on businsess landscape .then i have clicked on the specified system to be changed (RY1 ) and then clicked on change mode and selected the required client (100) and saved the settings.
2>I have logged into ID(Integration Directory) and selected the service (RY1) which need to be changed .Under service -->Adaper specific -->compare sld configurations and then clicked on apply changes.
3>Now selected that communication channel of service (RY1) RFCRecieverR3 and changed the client 871 to 100 and the password of user XIRFCUSER ...
Then i saved the changes and after that i have activated that interface.
After that when i logged into CC monitoring and viewed that service channels and see the following errors:
Receiver channel 'RFCReceiverR3' for party '', service 'RY1'
Error can not instantiate RfcPool caused by:
com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Mandante 871 não existente no sistema (selecionar mandante existente)
Can any one help me out of this situation , and i need to fix this ASAP as this is production system.
Awaiting for your reply.
Best Regards
Rakesh Reddy

Hello Nisar
Thanks for the update,
Let me say few points about this particular problem:
1>The interface "XX" from XI sends data to two systems( R3 -->RP1 & RY1), some thing like branched (same data is passed to both the reciever systems).
And the second RY1 is copy of First system RP1 (Production sys) which is used for data loading purpose and every week there will be a refresh from First sys (RP1) to Second(RY1).
2>Now the first sys(RP1) is recieving the data successfully from XI , and the second one (RY1) is getting failed .And this started after changing the Business system 871 to 100 .
3>As mentioned by you , I have checked all the points mentioned
    i)In SM59 for XI (ABAP part) two rfc's are maintained (LCRSAPRFC & SAPSLDAPI) and the test connection is also fine...But I did not find these two connections in reciever systems(RP1 & RY1 too).
   ii)In reciever system RY1 ,when i went to RZ70 , i did not noticed any special settings and SLD Bridge :Gateway Information is not maitained over there .and the same thing in other reciever system(RP1) , with this can we confirm that there is nothing wrong in RZ70 settings.
   iii)In SLDAPICUST at recievers end for both systems nothing is mantained , where as in XI system all the details are maintained(Host name,port, user & password).
I have translated the error log into english from the CC monitoring for this interface which is in portuguese language .
It says that:
RFC_ERROR_LOGON_FAILURE: 871 Mandante not in the system (select principal existing)
Kindly advise me what to do ..for fixing this problem(this is pretty urgent and it is production env...)..
If any information required , I can provide that.
Best Regards
Rakesh Reddy

Will the penfailure be solved after changing the cartridges? Installing printer again did not help.

Hp Print Diagnnostic Utility detected 'Pen Failure' I tried reinstalling printer driver again, checked cartridges installation for correctness, cleaned contact points but they did not help. Will the penfailure be solved after changing the cartridges? Installing printer again did not help.
Rajein

Yes, I did try it.
I completely uninstalled Firefox (including personal settings, bookmarks, add-ons etc.) and then I installed Firefox 24 from scratch. The outcome is unchanged. Namely, it installs it and then right when it is about to start for the very first time, it hangs. If I run the task manager I can see the process firefox32. It shows as if it is running. But in fact it is hanging doing nothing. It is almost as if the process is waiting for something to happen and that never occurs. Note that this should not have anything to do with, say, an incompatible add-on/plug in because I had them all removed. I also removed adobe flash prior to the installation and run the malware removal program too.

I reset my settings and content, the itouch just conged. what should i do?

I reset my settings and content, the itouch just conged. what should Ido?

What does "conged" mean?
If the iPod does not respond or turn on:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I changed the password to one of my gmail accounts. My MacBook Air accepts the new password and shows me email, my iPhone 5s tells me it's not a valid password. In settings, I change the password and pw is accepted. How can I get 5s to accept new pw?

I changed the password to one of my gmail accounts. My MacBook Air accepts the new password and shows me email, my iPhone 5s tells me it's not a valid password and does not show me email. In settings, I change the password and pw is accepted. How can I get 5s to accept new pw?

CORRECTION! GMAIL accepts new pw and shows me email. Mail on MacBook Air and iPhone 5s do not accept new gmail pw. What can I do to get my apple products to accept my new gmail pw?

PDF in Word after changing the old PC

How can I use the Adobe ExportPDF after changing the crashed and old PC

Hi Zis,
I'm sorry to hear that your computer crashed. That's never any fun. But, you shouldn't have any trouble accessing ExportPDF on your new system. Simply log in directly to cloud.acrobat.com/exportpdf. And, you if typically access the service from within Reader, you can download the free Adobe Reader from www.adobe.com/products/reader.html.
Please let us know if you need additional assistance.
Best,
Sara

No effect after changing the message mapping

Hi everybody,
i'm using PI 7.1. After changing the attributes in my message mapping i can no see any effect in my result.
Should it be a cache problem? Where can i delete the caches?
regards,
Sid

Hi,
I guess there can be two things.
before going to the tcode sxi_cache...
Please go to the IR, Click Environment, Cache Notification and then select author as your id.
Now see if any are in red status. if so click on the change and click Repeat Cache Notification.
Now press refresh.
I guess this will resolve your problem

ORA-12545 error after changing the host name as IP address in Tnsnames.ora

HI,
I tried to connect PHP and oracle in Red Hat linux. I got error ORA-12545 after changing the host name as IPAddress in Tnsnames.ora file. In sqlnet.ora file also i have entry for tnsnames in Directory_Path. I struggled so much but i couldnt solve that. Please give me ur valuable suggestions....

12545, 00000, "Connect failed because target host or object does not exist"
// *Cause: The address specified is not valid, or the program being
// connected to does not exist.
// *Action: Ensure the ADDRESS parameters have been entered correctly; the
// most likely incorrect parameter is the node name. Ensure that the
// executable for the server exists (perhaps "oracle" is missing.)
// If the protocol is TCP/IP, edit the TNSNAMES.ORA file to change the
// host name to a numeric IP address and try again.
Seems you specified wrong IP address.

Reset carrier settings after changing the carrier

Similar Messages

Maybe you are looking for