Reset Drill level after Refresh

Hi,
How can I reset the drill level in a webi report, after refreshing the data?
thanks and Regards,
Alex

Hi Alex,
Did you ever get this resolved? I have the same question and was wondering if you ever found a solution.
Thanks!
Gabe

Similar Messages

Reset lead selection after refresh in alv grid

Hi experts,
I've a problem with holding the lead selection in an alv grid table view in web dynpro.
After changing an attribute the lead selection in the view gets lost, but is hold in the referenced context node.
Is there a way to change the lead selection in alv by code?
I've found the method "set_index()" in class CL_SALV_WD_TABLE_LEAD_SELECT, can I use that?
Thanks a lot,
Kai

Hi Kai,
I faced a similar problem earlier.
Request you to elaborate about the "attribute" you are changing.
I was also facing a similar issue.
It will be gr8 if I can help you.
Please see the below thread for some reference.
[Not able to select a row in ALV|Not able to select a row in ALV?;
I hope it helps.
Regards,
Sumit Oberoi

Maintain the current row position of a table after refresh.

Hi,
I use a poll to refresh tables continuously. when a table is refreshed, the current referring row is reset.
To maintain the current row position after a refresh I use the following poll method.
public void refreshTableT1(PollEvent pollEvent) {
FacesContext fctx = FacesContext.getCurrentInstance();
ValueBinding dcb = fctx.getApplication().createValueBinding("#{bindings}");
DCBindingContainer bindings1 = (DCBindingContainer) dcb.getValue(fctx);
DCIteratorBinding dciter = bindings1.findIteratorBinding("<VOIterator>");
if(dciter!=null){
if(dciter.getCurrentRow()!=null){
Key current_row_key = dciter.getCurrentRow().getKey();
dciter.executeQuery();
if(current_row_key!=null){
try{
dciter.setCurrentRowWithKey(current_row_key.toStringFormat(true));
}catch(Exception ex) {
System.out.println("Exception in current_row_key");
}This works for normal tables well. But when I use it to master-detail tables (pair of tables) it does not.
At the master-detail tables, before the first data fetch, it works well. if we go below the first data fetch, it sets the current row into another position.
how can I overcome this...??
Thanks,
Dinuka.

Hi Mr.Frank,
I have an association in two VOs.
for example: There are 2 tables called Emp and Dept. Every Department has Employees. so there is an association (both tables have a common column). Master table is the Dept table. when you click on one record of the Dept table Detail table will show the details of the employees belongs to that selected department. That's what I referred as master-detail tables. first one is master table; second one is detail table.
When the web page loads all the table data is not fetched from the db (it will depend on the fetch size). when we scroll down the table data fetch happens again and again.
think my data fetch size is 25 rows per time.
Suppose we use mine poll method and think I have clicked on the 20 ^th^ row of table1(master table). then the table2 will display details belongs to selected department. that is OK even after refresh. that works well.
when I go to 30 ^th^ row data fetch will happen (my fetch size = 25)
when I click on the 30 ^th^ row of the table1(master table), table2 will display details belongs to selected department. but after the poll method is called the selected row at the table1 disappears and is set to another position. now the 30 ^th^ row is not in the 30 ^th^ position. but it is the selected row and table2 displays correct details.
I think you have got the problem now. :D
Thanks a lot.
Dinuka.

How to fix Windows update after refresh?

ENVY dv7, Windows 8. After refreshing Windows, Windows update is stuck at 0%

Hi Diaz418198,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP ENVY dv7 Notebook and getting a screen on startup at 0%. Try performing a hard reset. When performing a hard reset please note remove any and all USB devices, and remove memory cards from the card reader slot. Disconnect all non-essential devices. If that does not help try to turn on the computer you start to press F11 repeatedly till the menu opens. You can do a system restore.
Hope this is helpful.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Own fields on workbook lost after refreshing

Hi,
I have a query created with cell editor (fixed number of rows and columns).
In result area, at excel level, I have put my own rows to put headers with different colors, and some rows to make my own calculations.
In query properties, I have unmarked "Adjust formatting after refreshing".
At query level, in query properties I have also unmarked this flag.
In query properties I have only marked:
- Suppress repeated values
- Enable interactive functions
- Refresh query when opening woorkbook.
I have used it in other systems and it worked ok, so I don't understand this behaviour.
I am using BW3.5 and my BEx Analyzer version is 3.0B Patch 15 (last one).
Any idea?
Thanks

Hello,
Please check the query, which you have used to create wirkbook, and the query may contain variable or restricted key figure or may be cube has not data on which query is build.
Thanks.
With regards,
Anand Kumar

Screen goes back to lowest brightness level after wakeup

Hello All,
My late 2002 Titanium Powerbook screen sometimes goes to the lowest brightness level after wakeup when the lid has been closed. I manually have to reset the level again. Does anyone know why the level is not staying to my original setting? Do you think there's a corruption in the wakeup mode function? Just a hunch, though. Any input is much appreciated. Have a great day.
Jack
iMac G5 20, 2 GHz, 1.5 GB RAM Mac OS X (10.4.8) Powerbook 15" Titanium (late 2002) 1 gHz, 1 gig RAM, 60 gig HD, OS X 10.4.8

Hi TJK,
I just did a permission repair with disk utility to eliminate any other issues. I'll create a new user and give your suggestion a try. It makes sense since I recently got this machine used from another owner. I've nothing to lose, I suppose.
While I'm here, would a clean install eliminate the issue I'm having? I'm not too excited about having his name on my Home folder permanently, anyway. I've no problem doing a clean install, and I've got the original install disks.
Best regards,
Jack
iMac G5 20, 2 GHz, 1.5 GB RAM Mac OS X (10.4.8) Powerbook 15" Titanium (late 2002) 1 gHz, 1 gig RAM, 60 gig HD, OS X 10.4.8

Can't log on to my user account after refreshing lenovo ideapad u310.

I was having a problem with my network connection where it worked for the desktop but not for any apps that require the network so i started to refresh my laptop to reset anything that i may have downloaded that was affecting it. By refreshing it it removed my update to 8.1 which i was aware of before i started to refresh the laptop. Now when it asks for my microsoft account password and i enter in my CORRECT password it says that it is incorrect. I have even tried to enter my pin that i had on the laptop along with the actual account password and it just says it is an old pin and that i have to enter the new one. I never replaced it and am assuming that refreshing the laptop caused somekind of replacment of pin. But how do i recover access to my laptop? It wont allow me in without a pin or password...

Hi jenaS, sorry to hear that you're havig an issue after refresh of the system, if ur logged in using a live account it shouldnt change or remove the pin, if you are usin a local account the issue there might be in the profile on the system it might be corrupted, do you have a screen shot of the issue?
Dont fake the funk............

Excel Table with SharePoint Data Connection - Manual Text Entry Misaligned After Refresh

Greetings!
I have an Excel 2010 workbook that includes a table linked to my SharePoint 2013 site by a data connection. The SharePoint list feeds the table standard information that's managed on the SharePoint site, but I need the user of the Excel workbook to be able
to enter text manually in the workbook to associate local information with the line-items coming from the SharePoint list. To do this, I've added extra columns to the end of the table.
The user can enter information in the appropriate cells in the "extra" columns at the end of the table, but when I refresh the data connection, the addition of a new list item on the SharePoint side results in the user's manually entered text getting
out of alignment with the row it's supposed to be associated with.
Example
Column 1(SP)
Column 2(Extra)
Row 1
Item 1
Row 2
Item 2
Text entered for Item 2
Row 3
Item 3
Then, if I add a new item to the list in SharePoint, for example, something that would appear between the original items 1 & 2, after refreshing the table, I get the following:
Column 1(SP)
Column 2(Extra)
Row 1
Item 1
Row 2
New Item 1.5
Text entered for Item 2
Row 3
Item 2
Row 4
Item 3
The table's data connection is set to insert rows for new items, and I could swear I had this working properly once upon a time...but I can't seem to make it work now.
Any thoughts on what would cause this?
Thanks in advance!

Hi Eric,
>>but it seems that by extending the table itself to encompass both the SharePoint-sourced columns and the additional columns, that an association would be created between all columns for a given row in the table, no?<<
From my understanding, the answer is no.
Another example:
I have an additional column named "Column2" and an external column named "ID" (see "before").
After I add a new record and refresh this table, Excel will keep the last row in "column2" and add an empty cell in the second last row. (See "After")
If I delete the eighth data and refresh this table, Excel will still keep the last row and remove the last second cell.
In your case, if you insert a new record in the middle of the data and refresh this table, Excel will synchronized the external data and add a new cell in the additional column in the second last row.
From my understanding, Excel will always change the second last row to suit for deleting or adding record.
Hope this helps.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

New rows become deleted from snapshot sites after refresh

Hi buddy
I am facing problem in snapshot at snapshot sites.
I have oracle 8.0.5 4 database server machines.
all servers machines have O.S windows 2000 advance server
all servers machine have same oracle version ( 8.0.5 ).
there is Site A ( Master site ) site B ( snapshot site ) Site C ( snapshot site).
snapshot has been created at all snapshots sites ( B,C and at D)
snapshot log against each table are also present at master site ( Site A )
refresh group is present at snapshot site.
these are working since feb-2002 successfully. now problem occur in these sites if some miner issues comes then it has been resolved successfully.
Replication parameter in init.ora all all sites are as follows
global_names = true
job_queue_processes = 2
job_queue_interval = 60
job_queue_keep_connections = false
distributed_lock_timeout = 60
distributed_transactions = 16
open_links = 4
snapshot_refresh_interval = 60
snapshot_refresh_keep_connections=false
snapshot_refresh_processes = 2
few days ago one problem occurs in master site A. it become crashed. we did its recovery from previous night backup ( cold backup).
Now all branches are working. but my current problem is that we have 20 tables in replication.It is a snapshot replication old version of materialized view.
when site B start refresh procedure then it show message procedure successfully completed.
it show no error message.
but when we check no of rows at snapshot site ( site b )
all new rows which were inserted at snapshot ( site b ) after previous refresh has been deleted.
mean all data which is inserted after previous refresh command has been finished. but data which is inserted at master site is present at snapshot site after refresh.
this problem is present at all the snapshot sites ( site B, Site C and site D).
database link is also present from master to snapshot site anf from snapshot to master. but problem is still suspended.
i have checked at all snapshot site and master site there is no invalid procedure or package.
there is no error message in alert file at all site.
if any body has its solution kindly told me.
thanks in advance
Abdul Hameed
[email protected]

This is still going on when the page fails the call to getCurrentRow().refresh(Row.REFRESH_REMOVE_NEW_ROWS) goes out to lunch and stops processing for the rest of the function. I tried adding a try catch around it but nothing is caught and the function still fails.
getSiteMealLogsV().getCurrentRow().refresh(Row.REFRESH_REMOVE_NEW_ROWS);
---Stops working here -----
getSiteMealLogsV().clearCache();
getDBTransaction().commit();
Jim

After REFRESH the cached object is not consistent with the database table

After REFRESH, the cached object is not consistent with the database table. Why?
I created a JDBC connection with the Oracle database (HR schema) using JDeveloper(10.1.3) and then I created an offline database (HR schema)
in JDeveloper from the existing database tables (HR schema). Then I made some updates to the JOBS database table using SQL*Plus.
Then I returned to the JDeveloper tool and refreshed the HR connection. But I found no any changes made to the offline database table JOBS in
JDeveloper.
How to make the JDeveloper's offline tables to be synchronized with the underling database tables?

qkc,
Once you create an offline table, it's just a copy of a table definition as of the point in time you brought it in from the database. Refreshing the connection, as you describe it, just refreshes the database browser, and not any offline objects. If you want to syncrhnonize the offline table, right-click the offline table and choose "Generate or Reconcile Objects" to reconcile the object to the database. I just tried this in 10.1.3.3 (not the latest 10.1.3, I know), and it works properly.
John

Application not working after refreshing a page with F5

Hi,
Developed an application with jazn-data for security reason. In my application, i've taskflow with page fragments. In this fragment, i;ve LOv field with client listener to popup LOV using 'F8' key. After refreshing this page using 'F5' key or browser's refresh button, my application gets hanged. Even sign out button also not accessible. In browser's console i got "LaunchPopupUsingF8 is not defined" error. LaunchPopupUsingF8 is my javascript function for LOV popup.
Kindly guide me whats wrong in this...
Edited by: Usha on Sep 26, 2011 5:10 AM

Hi,
I would use JavaScript to disable the F5 button as it leaves the application in an undefined state after refreshing the content from the browser cache
see page 36 onwards (search for F5) for an idea
in http://www.oracle.com/technetwork/developer-tools/jdev/1-2011-javascript-302460.pdf
Frank

RFCs not working after Refresh, is this SecureStore issue?

In our landscape we do frequent system refreshes (DB copy). we use to take out RFC table export and then import them back after refresh. every thing was fine till we upgraded to Netweaver 6.0. Now after refresh most of rfc donesn't work (one which have user ID/ Password in them).
Here is my findings till now:
When we goto SM59 and RFC maintenance screen it give below message:
bold "User Password invalid for identifier /RFC/CCMS (see Long text)"
============================
This is what long message is"
Message no. SR128
Diagnosis
Changes to the global key or system data have invalidated the passwords in secure storage.
Procedure
Enter the user password again.
Procedure for System Administration
You can find detailed error messages for the specified ID in transaction SECSTORE.
======================================
In secstore transaction I found this message for entry:
"System-dependent data for entry /RFC/CCMS changed: TRS / WTH"
Long text for this is:
System-dependent data for entry /RFC/CCMS changed: TRS / WTH
Message no. SECSTORE031
Diagnosis
When accessing the secure storage, the system detected that system-dependent data (installation number or system ID) had been changed.
Entry data: TRS
Current system data: WTH
If you receive this message during a migration process, the "Current system data" field contains the old specified system data instead of the current system data.
The content of both fields can also be empty, if the system cannot determine the data in the current context.
System Response
It is no longer possible to access entries that were created with the previous data.
Procedure
Contact your system administrator.
Procedure for System Administration
For more information, see SAP Note 816861.
========================================================
When I check the note it talk about the system copy and migration key, release key. I don't think this is valid in our case.
Now I tried to find out the tables where secstore stores its data:
RSECACHK    Table for Controlling ABAP Programs
RSECACTB     Table for ABAP Access Authorization for Secure Memory
RSECTAB       Secure Memory: Memory for Encrypted Data
At present we backup following tables:
rfcattrib
rfcdes
rfcdoc
rfcsysacl
Please advise if anybody faces the same issue? does anybody have any solution any notes?
Edited by: Madhusudan Bansal on Oct 22, 2008 9:46 AM
Edited by: Juan Reyes on Oct 22, 2008 1:24 PM

I checked all the notes and tables. every thing is correct.
What I think wrong is when we do refresh at that time. SS (secure store) tables from source system come here! we just export and import RFCs but not SS.
All I wanted to know is If we export and import SS tables will this resolve our issue?
can you tell me have you ever did refresh for netweaver? did you face this issue?
appreciate your help

Excel Table with Data Connection Manual Text Entry Misaligned After Refresh

Greetings!
I have an Excel 2010 workbook that includes a table linked to my SharePoint 2013 site by a data connection. The SharePoint list feeds the table standard information that's managed on the SharePoint site, but I need the user of the Excel workbook to be able
to enter text manually in the workbook to associate local information with the line-items coming from the SharePoint list. To do this, I've added extra columns to the end of the table.
The user can enter information in the appropriate cells in the "extra" columns at the end of the table, but when I refresh the data connection, the addition of a new list item on the SharePoint side results in the user's manually entered text getting
out of alignment with the row it's supposed to be associated with.
Example
Column 1(SP)
Column 2(Extra)
Row 1
Item 1
Row 2
Item 2
Text entered for Item 2
Row 3
Item 3
Then, if I add a new item to the list in SharePoint, for example, something that would appear between the original items 1 & 2, after refreshing the table, I get the following:
Column 1(SP)
Column 2(Extra)
Row 1
Item 1
Row 2
New Item 1.5
Text entered for Item 2
Row 3
Item 2
Row 4
Item 3
The table's data connection is set to insert rows for new items, and I could swear I had this working properly once upon a time...but I can't seem to make it work now.
Any thoughts on what would cause this?
Thanks in advance!

Yes, it is. I realized after posting the first time, that I'd assigned the question to the Visio forum. I wasn't sure how to reassign to the correct (Excel) forum, so I re-posted over there:
http://social.msdn.microsoft.com/Forums/en-US/b3bbe00c-94c0-48d4-bed9-fbd08d707b1d/excel-table-with-sharepoint-data-connection-manual-text-entry-misaligned-after-refresh?forum=exceldev

Problems with codepage after refreshing data from XML

Hello,
I've created a dashboard with XML connection.
XML file with new data is created via macro in INPUT.xls Excel file. This INPUT.xls file was created through exporting spreadsheet from Xcelsius and then adding a macro to it, so text data should be this same codepade. Generated XML through macro have no errors and Flash file gets numeric data with no problems.
But there is other problem with text's codepage. After reload there are some unidentified symbols in place of polish alphabet letters.
What should I do to make it right? Is this a problem with codepage or something else?
[Dashboard Before Refresh|http://lh4.ggpht.com/_Q8NK6X6PPLg/TGkLwo3sxZI/AAAAAAAAA_g/mkBiDdM4Gi4/s640/before_refresh.JPG]
[Dashboard After Refresh|http://lh4.ggpht.com/_Q8NK6X6PPLg/TGkLwSx9fHI/AAAAAAAAA_c/3UeM2Gd3HvA/s640/after_refresh.JPG]
If you have any idea hot to fix it, please let me know.
Best regards,
Bart Dlug

Hello,
I have header in my XML as follows:
<?xml version="1.0" encoding="Windows-1250"?>
Only then my XML file is displayed correctly in Internet Explorer preview. When I chagne it to UTF-8 I get some errors.
[XML with windows-1250 codepage|http://lh3.ggpht.com/_Q8NK6X6PPLg/TGkUakDHjlI/AAAAAAAAA_o/lLlJFMcSaFQ/s800/codepage1250.JPG]
[The same XML with UTF-8|http://lh5.ggpht.com/_Q8NK6X6PPLg/TGkUa8k4vyI/AAAAAAAAA_s/tdcZNqu7-i0/s800/codepage-UTF8.JPG]
Error message means: Invalid character was found in text content. Error during processing resourcse file:///
As I wrote before, my data is generated via macro in Excel, so I supose my data in this file has windows default codepage. Am I right?
Do you think that I problem is XML file?
Best regards,
BD

500 Internal server error when loging in to Enterprise portal after refresh

Hi,
We had a data base refresh of test system with production data. After the refresh, when users are trying to log in to portal test server, they are getting error as follows:
The initial exception that caused the request to fail, was:
   com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: ComponentUsage(FPMConfigurationUsage): Active component must exist when getting interface controller. (Hint: Have you forgotten to create it with createComponent()? Should the lifecycle control of the component usage be "createOnDemand"?
    at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.ensureActiveComponent(ComponentUsage.java:773)
    at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.getInterfaceControllerInternal(ComponentUsage.java:348)
    at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.getInterfaceController(ComponentUsage.java:335)
    at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdGetFPMConfigurationUsageInterface(InternalFPMComponent.java:245)
    at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.changeToExceptionPerspective(FPMComponent.java:862)
I have instaled the certificate after refresh, but still getting this error. I work on SAP ECC6. Thanks in advance for your help.

Hi Bijoy,
Do you have the specific error message that the system shows when SSO is not working?
e.g. The system has received an expired SSO ticket
       Issuer of SSO ticket is not authorized
Did you do a connection test for your system connector?
You might want to check the following:
1. Time difference between portal server and ECC server
2. Parameters (e.g. login/accept_sso2_ticket = 1) in ECC have the correct value
3. User account that you are using for testing exists and is valid in ECC.
4. Portal certificate is still valid and has been added into certificate list and ACL of your ECC client (with the right SID and client number).
5. System connector settings in portal are correct.
Cheers.
Best Regards,
Zhi Liang

Reset Drill level after Refresh

Similar Messages

Maybe you are looking for