Reset  EKET-EINDT and EKET-SLFDT to SYDATUM on the date of release

Hi,
Can any one help on this issue for my client.
When the PO is released in ME29N and ME28, the item delivery date and stastical delivery date  EKET-EINDT and EKET-SLFDT  on the screen should get updated to sydate AUTOMATICALLY and at the same time update table EKET upon save.
This should not happen when user does any other changes on the screen for any item data.
I tried many exits and badis but could not succeed.
Can any one suggest the best method for this.
thanks
bye
joshi

Hi All,
I am able to get the field EINDT and SLFDT into the structure using Append structure and is also getting displayed in the output in ALV.
But i need to know how to add code for filling these fields and passing into ALV. I need to know the Enhancement spot.
Please let me know how to achieve this scenario
Thanks
Arun

Similar Messages

  • Need to Add field EKET-EINDT and EKET-SLFDT to ME2M Report output in ALV

    Hi All,
    I need to add fields EKET-EINDT and EKET-SLFDT to the output of program ME2M Transaction.
    I have appended the structure MEREP_OUTTAB_PURCHDOC with these fields. and it is coming in the ALV output field catalog.
    I need these fields output only for ALV display only.
    Please let me know which enhancement i need to write code to enhance the output with these filed values added to the ALV internal table
    Thanks in Advance
    Arun

    Hi All,
    I am able to get the field EINDT and SLFDT into the structure using Append structure and is also getting displayed in the output in ALV.
    But i need to know how to add code for filling these fields and passing into ALV. I need to know the Enhancement spot.
    Please let me know how to achieve this scenario
    Thanks
    Arun

  • I tried to reset my iPad, and it has not got past the apple start up page

    I tried to reset my iPad, and it has not got past the apple start up in several hours. I've tried connecting it to itunes but its not detected.
    What can I do?

    I assume that you mean that all you see on the screen is the Apple logo and it hasn't changed for hours from that screen. You may need to restore using recovery mode, since your iPad is not being recognized in iTunes.
    Instructions here.
    http://support.apple.com/kb/ht4097
    But - did you try this first?
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Using iPhone 3G ,Version 4.2.1,Modem Firmware 06.15.00, In this phone i was using Facebook upgraded app and Smart Sync App. Suddenly my sisiter reset all setings and now I can't use the upgraded facebook app, for smart sync is asking for IOS 4.3,Need help

    Using iPhone 3G ,Version 4.2.1,Modem Firmware 06.15.00, In this phone i was using Facebook upgraded app and Smart Sync App. Suddenly my sisiter reset all setings and now I can't use the upgraded facebook app, for smart sync is asking for IOS 4.3,Need help.

    Thank you for the answers so far, but I'll make one correction: I said earlier that the Boston Globe website, boston.com, does not have a mobile site, and I would need to visit their regular website on my iPhone. Actually, I just found out that boston.com has a mobile site, so I'd obviously use that instead of the regular site. By doing that, I'd save a ton of data (I think). Does that change your answers?

  • HT3529 When texting from my iphone 5, I was able to see when the text was delivered and when it was read.  An Apple Genius reset my iphone, and now I cannot see when the text was delivered or read.  Any suggestions?

    When sending a text, I was able to see when the text was delivered and when it was read, then an Apple Genius reset my phone and now I cannot see when the text was delivered or read.
    Any suggestions?

    Look in settings - message.

  • My 3gs keeps switching itself off and when i turn it on, the date is set to 1st January 1970

    I Have an Iphone 3gs that keeps switching itself off and when i turn it on, the date is set to 1st January 1970 :S   ... many software resets and updates won't do any good .. repaired at the manufacturer twice for the same, and works till it happens again on it's own. When it was repaired, the fix was mentioned as a reset done for the device. I have a friend who is alse havng same issue.
      can someone tell what is the reset that can be done to tr and do it from my end plzzz?

    Sounds like the battery is dead.  Bu try the following to rule out a software problem:
    - Reset the iPOd
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod.
    If still problem your battery is very likely dead.  An appointment at the Genius Bar of an Apple store is in order.

  • HT201413 suddenly itunes will not open and I get a message that the "Data Execution Prevention" is blocking itunes from opening....why????

    itunes will not open and I get a message that the "Data Execution Prevention (DEP)" feature in Windows is preventing it from opening. (this is after I've been using itunes for years???? If I try to manually deselect itunes from the DEP filter, of course I get a message that itunes cannot operate without the DEP active...another Catch 22 from the evil program designers....

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • How do i keep only the name of a month in a cell in Numbers and not have it auto fill the date and time?

    how do i keep only the name of a month in a cell in Numbers and not have it auto fill the date and time?

    Hi JN and Barry,
    Barry wrote:
    The second case may not be included in the available D&T formats in Numbers 3
    For my region, the Date & Time data formats include month.
    The Date Pop-Up
    This may not be the case for all regions.
    Remember that the month is only the display, and the Full Date & Time is still there. If I change the format to reveal what is behind the curtain:
    Regards,
    Ian.

  • HT1766 I have an iphone 4.I upgraded it to 5.0.1 and so I have lost all the data from my iPhone,but i have a backup in my computer.How do I use the backup file ? i.e How will i get that backup file in my iPhone ?

    I have an iphone 4.I upgraded it to 5.0.1 and so I have lost all the data from my iPhone,but i have a backup in my computer.How do I use the backup file ? i.e How will i get that backup file in my iPhone ?

    Connect phone to computer.
    Select Restore.
    Tell iTunes which of the available backup files to use, let iTunes restore it.
    Also, try reading the User's Guide as it answers questions like this.

  • I added 0AMOUNT in generic data source and in rsa3 i am seeing the data ..b

    i added 0AMOUNT in generic data source and in rsa3 i am seeing the data ..but i am not seeing any data in target table..
    what would be the cause

    Hi,
    I guess you mean the target table in BW, correct?
    First replicate your DSource in BW
    Open your TRules. In tab Transfer structure/Datasource locate your field in the right pane (should be greyed, not blue); move it from to the left (to the transfer structure); reactivate and reload.
    You should now see the field in your PSA table.
    hope this helps...
    Olivier.

  • EZ Vinyl Converter problem transferring to iTunes - window appears  "mixmeister programme has stopped working and will shut down". Then the data is lost, and I have to try to record/transfer again.  I have now tried many times.

    EZ Vinyl Converter problem transferring to iTunes - window appears  "mixmeister programme has stopped working and will shut down". Then the data is lost, and I have to try to record/transfer again.  I have now tried many times.
    The deck is ION TTUSB05XL   Laptop   Asus V550C with Windows 8.
    Strangely I did manage to successfully transfer two tracks to iTunes, but all further attempts have failed.
    JJR

    EZ Vinyl Converter problem transferring to iTunes - window appears  "mixmeister programme has stopped working and will shut down". Then the data is lost, and I have to try to record/transfer again.  I have now tried many times.
    The deck is ION TTUSB05XL   Laptop   Asus V550C with Windows 8.
    Strangely I did manage to successfully transfer two tracks to iTunes, but all further attempts have failed.
    JJR

  • My iphone 4s siri is not working, it just worked for a while and stopped. I've checked the data plan and it is intact, i even switched my sim to a friends phone and his siri worked but mine refused even with a wireless network. pls help.

    My iphone 4s siri is not working, it just worked for a while and stopped. I've checked the data plan and it is intact, i even switched my sim to a friends phone and his siri worked but mine refused even with a wireless network. pls help.

    Troubleshooting Siri
    http://support.apple.com/kb/TS4079

  • I have a numbers spreadsheet for tracking company data.  I want to copy the format of the spreadsheet (rows, columns,and formulas) but have all of the data fields be blank for the new year.  How do I do that?

    I have a numbers spreadsheet for tracking company data.  I want to copy the format of the spreadsheet (rows, columns,and formulas) but have all of the data fields be blank for the new year.  How do I do that?

    click and hold on one cell, then drag to select the range, then release, then type the delete key.  Only inlude cells in the range you do not want to keey the contents of the cell.  You can remove one-off cells by holding the command key and clicking cells to add or remove as needed.
    You can download the Numbers users guide here:
    http://support.apple.com/manuals/#productivitysoftware

  • I had to reset my laptop and now iTunes doesn't recognise the computer so I can't synch my iPad. Any one know how I can get this changed?

    My HP Compct laptop was dying a slow death so I had to reset it to its original factory settings. Now iTunes thinks it is a different computer, any idea how I can rectify it?

    Yeah I have the original CDs. And I have backed up some stuff. But shouldn't things like safari and itunes be working anyway? The applications are there, they just won't open. Someone told me would lose my preferences and just had to update them again, but I can't do so cause safari doesn't work and internet explorer won't let me get on certain sites...

Maybe you are looking for