Reset FC 3510 to Factory Defaults

I am trying to configure a Storedge 3500 however I am unable to access the device by using sccli. Is there anyway for me to access the controller configuration and channel settings without using a serial cable. I tried to use ethernet but the IP address of the controller is not configured. Basically all I want to do is just get it back to its factory defaults. Is there anyway to force it to reset? I tried to tip hardwire but it just sat there saying connected. Thanks in advance for your help!

Sorry about the confusion. It is a 3510 FC array. I've tried to tip into it with a serial cable both from the server and from a laptop with no luck. I know im using the right settings and the cable is good because I was able to tip into our other system's raid with no problems at all. I've tried sccli, tip, terminal session from windows laptop and the lan connection all with no results. I'm not really worried about data loss so I'm willing to do whatever it takes to get these controllers working again. Also I noticed that both controllers are giving me an amber light in the back where the status is indicated however our working systems has one blinking green and one solid green. Thanks, this raid is really starting to be a pain for me.

Similar Messages

  • I made the mistake of resetting my iPod to factory defaults. Now it will only partially sync to my music library. I continually get an error message saying that certain songs are not authorized for my computer. Any ideas?

    I made the mistake of resetting my iPod to factory defaults. Now it will only partially sync to my music library. I continually get an error message saying that certain songs are not authorized for my computer, although they are in the iTunes library on the computer and will play. It's these songs that won't transfer to the iPod. I have deauthorized and re-authorized the computer but no joy. Any ideas?

    Hello there DesertRat71,
    I was thinking that some of the songs in your library may have been purchased under a different apple id. You have already done the first thing I would have done by de authorizing and re authorizing. To verify this, highlight one of the songs that will not sync over and use File>Get Info. Here is the help menu link for it if you need it help://bookmark='https://help.apple.com/itunes/mac/11.0/help/index.html?localePa th=English.lproj#itns2937'
    In the Summary section there will be an Apple ID entry. If it shows something different than what you are currently using then I recommend signing into the Apple ID it shows and authorizing the computer for that one as well.
    All the best,
    Sterling

  • How do you reset iMovie back to factory default

    Hi,
    I have a Mac pro where I am experiencing the "slow audio" problem.
    I have just porchased a Mac Book,and importing video/audio with no issues.(latest software installed on both systems).
    Is there a way to reset iMovie back to "factory defaults"?
    Many thanks.
    Eli

    Bev hi,
    Many thanks for your prompt reply.
    Fantastic,all works as it should.
    If any other users out there experience "slow" audio or the audio lagging behind the video when importing HD (Sony) tapes into iMovie,try Beverley's tip.It worked for me.
    Cheers
    Eli

  • Reset Aironet 1231 to factory default

    I have a (old) 1231 that I would like to reuse, but no one remembers the password.  Anyone know how to recover a password from this model AP or how to reset the device to factory default?
    Thanks in advance -
    Kristin

    Hi Kristin,
    Here is a link that will help you reset the ap.
    http://www.cisco.com/en/US/products/hw/wireless/ps430/products_password_recovery09186a00800949d0.shtml
    There is no way to change the password, without logging into the ap. So you will need to reset it..
    "Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin

  • Ipod touch 4th generation became too slow after ios 6. How can I rollback to iOS 5 or what else can be done. I already did  master reset and restored to factory default but no improvement.

    Ipod touch 4th generation became too slow after ios 6. How can I rollback to iOS 5 or what else can be done. I already did  master reset and restored to factory default but no improvement.

    You cannot downgrade

  • After resetting my MAC to factory default how do I reinstall my Creative Suite 5?

    After having to reset my Macbook Pro to factory default, do I need a new product code to reinstall my Creative Suite 5?

    Yes. You have to erase the device in Settings>General>Reset>Erase all content and settings.
    iCloud: Restore your iOS device from iCloud - Support - Apple

  • I can not reset my ipad to factory default. Any help appreciated

    I have taken over my dads ipad, but cannot download any apps as he cannot remember his apple id password.
    I have tried to reset ipad to factory default with no luck

    Read this:
    http://support.apple.com/kb/HT5818

  • HT1414 How to reset iphone 2g to factory default

    I got iphone 2g with Jail Break. How to reset to factory default.

    Sorry, problems this jailbroken devices can't be discussed here, due to the Terms of Use.
    You'll have to ask those people who helped you to modify the software.

  • Reset fax 810 to factory defaults

    Does anyone know how to reset the LC 810 Fax machine to factory default?  An unknown user in the office setup Dept IDs and no one the correct login.  The only message on LCD is "Enter Dept ID".

    1. Press Command and R keys while your Mac is starting.
    2. Open Disk Utility, choose Macintosh HD in the sidebar and erase the drive.
    3. Install Mac OS X. Your Mac will download OS X from the App Store, so it will take more time

  • Reset OS X to factory defaults

    Can someonen tell me what the power on keyboard combo is to  reset ML to factory defaults. I want to wipe my MBP clean and I can't find it anywhere on  here.
    TIA,
    Peter

    1. Press Command and R keys while your Mac is starting.
    2. Open Disk Utility, choose Macintosh HD in the sidebar and erase the drive.
    3. Install Mac OS X. Your Mac will download OS X from the App Store, so it will take more time

  • Reset iPhone 5 to factory defaults

    On the iPhone 5, does "Settings / General / Reset / Erase All content and Settings" restore the iPhone to factory defaults, or just reset the settings but not actually delete all data &/or set back to factory settings?
    Thanks!

    If your current device has an iOS version that's older than the one used when making a backup, then you won't be able to perform a restore.  The fix is easy, simply update the iOS of your device to the most current one and perform the restore again.
    BTW, a restore does not involve the iOS.

  • Reset WLC Module to factory defaults from router cli

    I have a wireless lan controller module in a 2811 router that has a previous config and need to reset it to factory defaults from the router cli.  Every time I try a "service-module wlan-controller 1/0 reset" I don't see any output on the screen indicating the boot process that would allow me to interrupt it and reset a password.
    I tried following this doc but had no luck:
    https://supportforums.cisco.com/docs/DOC-3668
    Anyone have any experience with this?

    Hi Joe,
    Not sure, but this doc does list a couple of different steps
    http://www.cisco.com/en/US/products/ps6308/products_password_recovery09186a008071faa7.shtml#topic1
    Cheers!
    Rob

  • Reset Project 2010 to factory default settings

    I downloaded the trail of project 2010. I have been playing around with the settings.  But now I want to reset the settings back to the original factory conditions.  I do not see a button to do that. Please help.
    Eric

    Hello, can someone please post the full path to access the HKEY file to delete? I am unable to find it. C:\HKEY_UserName\Software\Microsoft\Office\14.0\MS Project\Options does not work. I am able to get to the other path to delete the global template, but
    that does not work for me either. I have also tried uninstalling and reinstalling.
    I have tried 15.0 as well and am filling in my user name for UserName in the path above.
    Please help!
    Thanks!

  • How do you reset keyboard backlight to factory default?

    I have a MacBook Pro running it's latest update (10.7.3) , and would like to reset the keyboard light and the desktop light to it's default.
    How?
    thanks

    No "default". It's either Off, On (to a user defined brightness) or Automatic.
    Automatic, if the "Automatically illuminate keyboard in low light" checkbox is ticked in System Preferences / Keyboard / Keyboard. "Low light" is determined  by a light sensor located to the left of the FaceTime video camera on the top edge of the display, the illumination threshold is not adjustable.
    Manual will be dependent on pressing the bright/dim keys on the keyboard, automatically mapped to the F6/F5 keys on the top row.
    Display brightness can also be set to automatically adjust, with the "Automatically adjust brightness" checkbox in System Preferences / Displays.

  • Can a Qosmio be reset/refo​rmat to factory defaults?

    I had an old HP that i could push F2 or F3 and it would give me the option to reformat it to the way it was when it was brand new. Like with all the factory programs installed to it.
    Does my Qosmio X505-Q890 have the same feature, if so how do i get to that screen?
    Solved!
    Go to Solution.

    Hi,
    I also have a Toshiba Qosmio X500 (10Z model) and I tried to reset it. But, when I turn it on with the zero key pressed it starts beeping. The beeps stops while the Toshiba logo appears with the options to enter Bios or manage the boot devices, but afterwards it's keep on beeping. And then.. nothing happens, only the beep is played. When I release the zero key it starts loading windows. That's it.. no menu. In my laptop's manual it's the same: start your computer with zero key pressed.. but it doesn't work for me.
    I tried with F8-> System Recovery-> Toshiba HDD Recovery, but it only reinstalls windows. And it's not enough, I want a factory reset, I want to redefine my partitions, RAID & so on.. 
    Is there any way I can reset it without a recovery DVD? Am I doing something wrong when I try to boot with 0 key pressed? 
    Thanks

Maybe you are looking for

  • XSL support level

    I have a form that will need to be transformed on the way in and on the way out. I am using MapForce to create the mappings between the two. It appears that some of the functions I need are XSLT 2.0 exclusive. Does LiveCycle support XSLT 2.0?

  • SAP note for implementing FM CONVERSION_EXIT_MATN2_OUTPUT

    Hello Experts, I need to implement the FM CONVERSION_EXIT_MATN2_OUTPUT ( + Conversion routine MATN2 ) in our SAP system version 4.7.  Can anyone tell me if there are any specific SAP note for implementing it.  Note: Our SAP system dont have DI softwa

  • CSTV connection issue

    This is the definition of a shot in the dark, and I know it isn't the place to get an answer to this but I cannot get CSTV to answer my requests for help. CSTV is a service which provides streaming for college football games. I cannot get either thei

  • Where is a duration bar in Adobe Premiere CC?

    Where is a duration bar in Adobe Premiere CC? It's gone. It's missing. I can't see this anymore.

  • Tkprof list each sql statement

    I think I registered this question once, but I cannot find it now so I'll do it again. I have a 10046 trace with a statement executed twice in the same session (same bind values) . I have different plans for each execution When formatting the sql is