Reset ipad, now it will not load new software

Reset ipad to factory settings, it now says it's in restore mode, it gets as far as data extraction verifies it with Apple and then will not load the software back on it any suggestions?

Hi seimour,
If you are having issues restoring your iPad, you may find the troubleshooting steps outlined in the following article helpful:
Apple Support: Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Regards,
- Brenden

Similar Messages

  • HT1386 I unplugged my iphone while it was syncing with itunes and now it will not sync new music that I have added to itunes? How can i fix it?

    I unplugged my iphone while it was syncing with itunes and now it will not sync new music that I have added to itunes?

    iPhone User Guide
    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    Restart / Reset
    http://support.apple.com/kb/ht1430
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

  • Just updated Safari in 10.7.5 and now it will not load (beach ball)

    I am running 10.7.5, and I do not want to update to 10.9 at the moment. I updated Safari, and now it will not load. It gets stuck at a white screen with the beach ball of death. Any ideas? Thanks.

    I uninstalled Glims. That solved the problem.

  • Tryed installing vista on my mac now os will not load please help

    Tryed installing vista on my mac now os will not load please help

    Some information please. What MBP model? What OS are you running? How didi you install Vista?

  • My mac computer will not update new software

    Hi
    My IMac is very old and is not under warranty anymore just for reference. I have taken my computer to an Apple Retailer to get major problems fixed before and the issue's subsided. But one problem is still here.
    My IMac will not update new software, everytime I have attempted to update my software before and it does nothing, if the software happens to load and finish then when it says "to finish the update you will need to restart your computer" that is the problem, my computer cannot update new software because it does not restart properly and therefore cannot do any initail updating and it is becomming very fustrating. I have no idea what to anymore. I have pretty much just given up the fact that my computer is completely ancient.

    What happens when you try?
    Are you updating OTA or via iTunes?
    GB

  • Ipad will not load new email

    ipad will not load any new emails.  i have one through outlook and one gmail.  neither will load anything new.

    Do you have a wifi or 3 g connection?
    Did it used to work?  What does the mail app do when you open it?  Is there the little circle at the bottom, checking for new mail.
    Have you checked the accounts from safari, or a computer, to see if it is an ISP problem?

  • IPad 2 - did an erase and reset and now it will not respond

    I did an erase and reset on my iPad 2 and now it will not respond, not even by plugging it in to a computer.
    I attempted to do this last night before 10pm and it is after 1pm and is still "cycling".  (The little circle in the middle of a black screen that just goes round and round)
    I've tried to power off with side and front buttons and I have plugged it into the computer as well.  Computer is not recognizing it is even there.
    HELP!

    Powering Off by using the two buttons? Did you reboot it this way?
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • 4.01 automatic update today 4.29.11, now pages will NOT load at all, just hangs there saying connecting. Tried system restore, re-installing, only way to get it to work is to boot in safe mode. Running W7, 64bit, I5, 2.53 ghz, 4GB, ati radeon 5470

    I've been using firefox 4.01 Today (4.29.11) it downloaded an update and now the pages will not load. I tried disabling the add ons, system restore, un-installed/re-installed but the page hangs there and just says connecting. I booted in safe mode with networking and it worked. Running W7, 64Bit, I5, 2.53GHZ, 4GB, ATI mobility radeon 5470

    I've been using firefox 4.01 Today (4.29.11) it downloaded an update and now the pages will not load. I tried disabling the add ons, system restore, un-installed/re-installed but the page hangs there and just says connecting. I booted in safe mode with networking and it worked. Running W7, 64Bit, I5, 2.53GHZ, 4GB, ATI mobility radeon 5470

  • Ipad 1 updates will not load

    my updates will not load  it keeps asking for my password

    you could try creating new admin user, log in as the new user and try running updates again
    if it does not work, issue could be with the OS; if it works, could be the original user account issue

  • HT4097 I did a reset on my iPad now it will not accept my pass ode and I'm locked out what can I do

    I did a restore on my iPad I was trying to take a screen shot but did something wrong I was following a manual app anyway it turned out I preformed a reset by pushing the off button and front control button together as a result it re set it self and now it won't accept my passcode and I'm locked out what can I do can't get to apple shop as on holiday in austria

    If you can't unlock the device because it will not accept the passcode, there is only one thing you can do.
    You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
    Instructions can be found here.
    http://support.apple.com/kb/ht1212
    You may have to use recovery mode if that didn't work.
    http://support.apple.com/kb/ht4097
    BUT .... Just for the heck of it, reboot the device before you resort to restoring and see if ithe passcode will work.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • HT2573 I can't get safari to load the apple express lane web page post mountain lion upgrade ? Other pages now also will not load

    Post the lion upgrade safari will now not load some pages....apple express lane start page for one....other secure sites such as web payments sites too.  Also I can not get AirPlay mirroring on safari.....which works fine on the ipad.
    I have tried downloading and installing the update twice....no change.
    Any ideas !
    Thanks
    Ep

    Followed a thread on one of the other message boards and fixed it....by reinstalling Rapport. now seems to work fine.
    ep

  • I have had Elements 13 since November & it has been fine until now. Organizer still opens, but now Editor will not load.

    PHOTOSHOP Elements 13. Had it since November. Now organizer loads, but editor will not. Read all instructions, find them hard to follow re troubleshooting, but nothing seems to cover my problem? What do I do?

    Mac or PC?
    What OS version?

  • HT4623 first of all, I dont understand this stuff....but on my Iphone 3 I use to have skpye on it now it will not load since the IOS.4.2.1   now what do I do

    Well first of all, you must speak in basic english...I have a  basic Iphone 3....which I use to have Skpye on it..after restoreing it, it will not allow me to add Skype to it now......any ideas?  the Software is always updated but not to the IOS.4.4  only IOS.4.2.1

    The latest version of Skype will not work on such an old version of iOS. I believe it needs 4.3, which you cannot get on your iPhone 3G. Restore to a backup that was done while you still had Skype on the iPhone.

  • My IMac will not load installation software for Mobile Internet USB Plug

    Hi, I have a new IMac(Leopard), and have recently loaded a new USB Mobile Internet Plug (SFR France) on to the machine in order to access the internet/mobileme.We live on a boat in France so being "connected" is so important to us.
    The installation software is in the USB plug, it loaded successfully, connected and worked well for a period of time.
    The IMac then seemed to "forget" the application, and did not open correctly and I had to "force quit" to continue.
    I then removed the application and any bits I could find in other folders, and tried to re-install by inserting the plug again. The Icon to install only flashed on the desk top and disappeared so I could not perform this task.
    I even tried to "restore" from Time Machine (and my external hard drive), the icon to install appeared on the desktop and I installed the application, but when I clicked onto the "connection icon" it jammed again and did not load.
    I checked the status of the installation device by loading the program successfully on the Macbook Pro I have, and even loaded it onto a Dell PC and even had it checked at SFR, and all ok. So it appears the problem is with the IMac.
    Any advice suggestions would be greatly appreciated, it is so frustrating!

    I have had similar problems with both Sprint and Verizon units (Novatel u727 & u760). Solved both by going to provider sites and downloading SW.

  • Installed new hard drive now iTunes will not load my purchases on my iPod

    I installed a new hard drive on my computer and successfully transferred all my files to the new hard drive. The first time I tried to sync my iPod a message appeared that my iPod would have to be reformatted to operate with this version of Windows.
    Now, iTunes recognizes my iPod but during the update an error message displayed indicating my iTunes purchases were prohibited from being loaded on my iPod and removed the purchases I originally had on my iPod.
    How do I get iTunes to include my purchases when syncing my iPod?

    Thank you Patrick. You solved my problem. Just checked it out and I now have my purchases on my iPod. Only annoying thing was I had to authenticate my computer a couple of times.
    S

Maybe you are looking for

  • Check control signal and write in 1s, ignore control signal for the following 2s.

    I am new to Labview, recently I use DAQ to receive 2 channels, one is expected signal and another one is control signal. If the control signal is higher than threshold (rising edge), write expected data in 1s. Then, ignore the control signal in 2 sec

  • Help with Layout

    I've got a simple layout but I need to get it looking more like this picture: http://members.lycos.nl/ghanswebsite/Layout.JPG Now I got a simple GridBag. I tried a few other layouts but they got me errors so until now I evaded them .. :-(. // Fig. 12

  • Switching between office network & home adsl modem

    Small problem. Is it possible for my iBook to automatically detect whether I'm connected to either my office network or my home USB adsl modem? At present, I have to manually go into System Preferences/Network and switch from one to the other and the

  • My iTunes rentals are not appearing in my Library

    The files are visible (but not playable) in the iTunes Media folder, but the Rentals tab has disappeared from my Library - any ideas? 

  • Exiting program after text file is created

    i want to close labview using the exit.vi after the text file is created....also i am using c++ to execute the labview application is there anyway to make sure labview finishes its routine in c++ before i send the text file to a motion controler the