Reset mac mini system not password

reset mac mini not password thanks

They were likely talking about a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/ht1379
In fact, do 3 in a row, takes a bit of time.
Won't hurt, but likely more is needed.
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much free RAM & free Disk space do you have also, click on the Memory & Disk Usage Tabs.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.

Similar Messages

  • New mac mini system will not recognize wireless keyboard and trackpad.

    My brand new mac mini system will not initialize properly.  The return on the track pad are not being recognized, although scrolling is. Any others find this?  Support could not figure this out on the phone.  They sent me out to get new batteries and now they are closed.  Batteries have been changed and still nothing.

    My Mac MINI gave me one heck of a time trying to get it  to recognize my Bluetooth mouse and keyboard. both Apple brand.
    I finally had to connect an old USB mouse and keyboard to get the silly thing to connect. 
    Don't forget to repair permissions. 
    I also had to shut the computer down and start it back up a couple of times before it would connect.  I think it has to do with the new Bluetooth 4.0 wireless technology.
    I also turned off my Bluetooth devices and turned them on again, then I pulled the batteries out a couple of times and tried again and again.
    I also put in new battries even thiough the ones I replaced were about a week old.
    Finally, the MINI recognised the mouse and keyboard.
    I wish I could tell you which thing did the trick.

  • My mac mini does not boot, after backing the enire system onto an external drive with Carbon Copy Clone

    My Mac Mini does not boot, after backing the enire system onto an external drive with Carbon Copy Clone. I had switched the start-up disk back to the original of course. Now all I see is the Apple logo. What should I do? Thanks in advance.

    Try disconnecting any external devices, especially hard drives
    and try rebooting.
    If that doesn't help, then :
    If you are running Lion, boot to the Recovery HD and run a
    Repair Disk on the OSX partition.
    If Snow Leopard, boot to the installl DVD and run Repair Disk.
    Also, you may want to bookmark this:
    http://reviews.cnet.com/8301-13727_7-57345273-263/troubleshooting-the-boot-proce ss-for-intel-macs/?tag=txt;title
    for future reference.  It is a pretty good explanation of the
    Mac boot process and how to identify where problems may be.

  • My mac mini will not shutdown with either Mavericks or Yosemite (following a clean install)

    First noted while running Mavericks, my Mac-Mini will not shutdown.  It just hangs on a black screen with the little icon.  I created a clean user account and the problem went away.  Rather than do a fresh install of Mavericks, I waited until Yosemite came out.  I reformatted the drive and did a fresh Yosemite install.  I then restored my apps and data only to find the problem is still present.  I've also tried stopping many of the applications I would normally expect might cause the problem with no luck.  And I tried the one Yosemite suggestion regarding deleting the Library/Caches folder content with no luck.
    My naive question:  following the fresh install of Mavericks, should I have done a re-install of my (very many) applications instead of a restore from an image?
    I've tried looking at the system logs after I've forced a shutdown with the power button but there's nothing I could find that shows any problems.
    Any other suggestions of things to try would be appreciated.

    Hi,
    Thanks.
    It is running 10.5.8.
    I am trying to boot up an external drive with 10.5.8 on it. It works on my Macbook Pro which is running 10.5.8, runs on my IMAC running SL. But doesnt work on the mac mini?
    It had been running SL, however there are a number of programs I have like Windows Live Sync which are not yet compatable with SL so i downgraded to 10.5.6 which came with the Mac Mini then loaded all updates.
    It seems to just go into an auto reboot as soon as i click on it.
    i thought it might be the firmware? Is it possible to downgrade them and then re-install?
    I have reset the PRAM.
    Any help would be appreciated.
    Thanks

  • My Mac Mini will not read TDK disks from my iMac G3.

    My Mac Mini will not read TDK disks from my iMac G3.
    I used an iMac G3 (2001) -- the ones that looked like a big pod -- running on OS X and saved files to TDK  CD-R, 700 MB disks, which worked fine. Now that I have a Mac Mini (model number  A1347) I cannot get this computer to read those disks, made on the iMac G3.  Once inserted each disk will open and I can retrieve files for a short period, then the problems start. The computer makes some noises, the beach-ball/pinwheel goes around and I cannot get the files to open or the disk to eject. After a while the disk does eject -- to my relief. I keep using Control+E until ejection happens.
    My Mac Mini (2010-2011) is hooked up to a View Sonic HDMI LED monitor, an iOmega external hard-drive for backing up, an Epson Stylus C88 Plus printer and to the internet by a fibre 10MB feed. The Mac Mini runs on OS X version 10.6.8 Snow Leopard: Processor Speed:2.66 GHz
    I took the Mac Mini to an Apple retailer and he hooked the computer up to one of his monitors and it read the TDK disks just fine. I am now using Sony CD-RW, 700 MB disks, but I would prefer to use my TDKs because I have such a large pile of blank ones to use and there are those TDK disks with information that I want to look at from time to time. Can anyone tell me what to do?
    DJG

    Try disconnecting everything attached to the Mini except the monitor.
    If that doesn't work, try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later. If successful, copy the files to the original account Public/Dropbox.
    Isolating an issue by using another user account
    If the problem is still there, try booting into the Safe Mode using your normal account.  Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
    Safe Mode - About
                    Safe Mode

  • My mac mini will not let me log in.   it says i can change my login info with my apple id.   no good!   help desk stumped!   Help!

    my new Mac Mini will not let me log in.   I shut it down while away on vacation and now it will not accept my password.   I tried to log in with my apple ID and it still would not accept it.   I stumped the apple help desk.   Help!

    User Password Reset

  • Help, my Mac mini will not start up, only keeps thinking on first page( white screen with apple emblem)

    Help, my Mac mini will not start properly. Only goes to the white screen with thinking. Will not go to the password section

    Are you sure about your hard disk health, any clicking noice recently?
    Go to boot menu (press option button or button left to your space bar while booting) > Select Recovery drive > Disk utility > Verify the volume on which OS X is installed.

  • Hello, mac mini will not boot. I get a file symbol with a question mark, then a white screen, Hello, mac mini will not boot. I get a file symbol with a question mark, then a white screen

    Hello, My mac mini will not boot. When I turn it on, I get the chime, then the white screen, then the apple symbol, then a file symbol with a question mark, then the white screen and then it stays like that.
    Is this a bad hard drive?

    Sounds like it.  Try booting from your OSX restore DVDs - startup and hold down "C".  This will take AGES! Then run Disk Utility from the menu. 
    The flashing ? means your system is corrupt, dead, not there, on a dying HD, etc...

  • My Mac Mini was not sending a signal to the monitor. I powered down using the power button and now it will not start. When i power up I get a strange 2 tone sound, like a warning alarm. The fan starts, and the light comes on, but no screen

    My Mac Mini was not sending a signal to the monitor. I powered down using the power button and now it will not start. When i power up I get a strange 2 tone sound, like a warning alarm. The fan starts, and the light comes on, but no screen.
    I have tried with a wired USB keyboard and mouse using a single screen. Powered up with option pressed. No change.
    Reset SMC  no change

    Run the Apple hardware test to see what it tells you. Run the extended test when prompted, which can take awhile.

  • My mac mini will not shut down.  I need to manually shut it off with the power button.

    My mac mini will not shut down or restart.  I need to manually shut it off with the power button.

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time after  you had the problem. Select the messages logged before the boot, while the system was unresponsive or was failing to shut down. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V). Please include the BOOT_TIME message at the end of the log extract.
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post any other kind of report — it will be very long and not helpful.

  • 2010 Mac mini Superdrive not burning DVD's

    My mac mini is not burning DVD's right. I put in a 500GB harddrive a few months back and the SATA cables are attached correct. I can read DVD's but writing DVD's doesn't work. The process finishes but when after I eject the disc I can see that nothing is burning in the inner most part of the disc. When I put the disc back in the computer thinks the disc hasn't been burned and asks if it shuld be open in finder like a blank disc. I know a cd/dvd should burn from the center and spiral outward as it writes more data but it seems the disc is offset when it writes its first data, leaving the inner most part of the disc blank. Maybe I should reformat the OS and start from scratch to see if that helps. Any other ideas?

    Strange these Memorex DVD's worked flawlessly a couple of times then I started getting these srange burns. I think I'm going to blitz this install I'm backing up with time machine now so I'll see what happens. Is there anyway to reapply an EFI update to make sure nothing is corrupt? I did notice what looked like brownish black burns on the logicboard when I opened it up to put the new harddrive in. They were on the long solder traces where they test the logic board by the the logic boards sata connections. I keep the system on 24/7 but don't really play any 3d or do anything that is too processor intense. Another thing is the superdriver seems to favor the left side when a DVD is initially inserted and ejected but moves to the conter when pressed all the way in I can't remember that being normal.

  • Mac Mini will NOT Load

    Hello Happy Mac People.
    I am currently having issues with my Mac Mini.
    Currently, in it's Superdrive Slot rests a disc that was meant to install a Microsoft Keyboard and Mouse combo that was wireless.
    I know what you are going to say. Microsoft equipment. Yes, I know.
    Anyway. After it asked me to restart said Mini to install the software, I do so....to a grey screen. No apple logo, no spindle. No nothing.
    So I turn to my trusty Mac Mini guidebook!
    Method 1: Restart. Tried. Didn't work.
    Method 2: Restart while pressing Option and Apple and P and R. Tried. Restarted the mac with the second chime. Didn't work.
    Method 3: Restart while pressing Option. Tried. Gave me the Macintosh HD to choose. Mouse happy to regain control of facilities. Pressed button under HD logo. Mouse hisses at me for being frozen again. No go.
    Method 4: Unplug power cord. Press power. Replug power cord. Fan within Mac Mini becomes angry and goes full tilt. Turn off Mac Mini. Turn on Mac Mini. Fan still having words of anger with me. Turn off Mac Mini, unplug, turn on Mac Mini. Fan has reconciled it's differences, but still receiving grey screen at every step.
    Please help. Need Mac. Windows Bad.
    Lovingly,
    John Martin
    Mac Mini Intel Duo model.

    Was the software for windows or OSX?
    Software was for OSX. Was even in a .dmg
    where you in Boot camp when this all occured, or are you trying to load the drivers for OSX?
    Drivers for OSX
    Sounds like something really crapped out. Did you try booting into single user mode
    Never heard of. Will try. Rebooted. Pressed Command and S. Nothing. Pressed option and S just to make sure. Nothing. Mac Mini has appearantly become box that is silver and white that just so happens to be labeled with the apple logo. Not happy that computer has just become paperweight.
    Here's the KB article that tells you how (basically hold the S key down when it boots up.
    If you succesfully get into single user mode try running fsck (/sbin/fsck -fy)
    Also try running the disk utility from the install disc, and/or the Apple Hardware Test also on the install disc.
    To start AHT, reboot the computer and hold the option key down and select The Apple Hardware Test.
    Something may have hosed your system, if that is the case you may need to reinstall OSX, if that is the case (I cannot imagine it is) just do an archive and install. This will preserve your home folder and user settings so you shouldn't lose anything. This of course should be your last resort.
    This would work, if the install disc were not still in. Tried restarting to click mouse button to release prisoner disc. Mac Mini would not agree to terms. Install disc misses it's family.

  • Help - Mac Mini does not boot after re-install of OS X

    Hi,
    I have a Mac Book Pro and Mac Mini. I needed to reinstall my Mac Mini but lost the install disks. The install disks of the Macbook do not work (machine specific). So what I did was boot the Mac Mini in firewire target mode and installed OS X to it from the Macbook. Worked ok. Except for one thing: The Mac mini does not boot the fresh OS X installation. I get a blinking folder icon with a question mark on top of it.
    I booted from the Mac OS X install disk, repaired disk permissions etc. and tried to use the "Startup Disk" utility to select the hard drive as a boot device. But that utility does not offer me to select the hard disk, it doesn't even show up (while DiskUtility can perfectly see it).
    Any hints for me? I am pretty much stuck right now.
    Thanks

    Well, see, the fact that it wouldn't let you boot from the MacBook install disks should have been your first clue to not try to do it. There's a reason it wouldn't let you. The MacBook install disks contain a version of the OS specific to the MacBook, in order to prevent people doing what you just tried to do (ie, installing the same copy of the OS on multiple machines).
    If you don't have the Mac Mini system disks any more, you'll have to go buy a copy of OS X. You could also ask for help from an Apple Store, if there's one in your area, but I honestly don't know if they would give you new disks. I would think they should (for a small fee), since Mac Mini system disks would be useless to anyone who didn't already own a Mac Mini, but you never know.

  • Mac Mini will not connect to Air on bluetooth.

    Mac mini will not remain connected to Mac Book Air when pairing with bluetooth. Pairing initially goes as expected providing the code.  When pair is pressed the two systems connect for about 1 second and then system states that they are not connected.  I am operating 10.9 on the Mac Mini and 10.8.5 on the Air

    To my knowledge, you cannot connect two computers using Bluetooth. You can connect them, of course, via a network.
    Barry

  • Mac mini can not find the NAS

    In my network I have a Mac mini, AirPort Extreme base station and a Netgear ReadyNAS Duo v2. Everything is connected by cable. The problem is that the Mac mini can not find the NAS. Mac mini is looking for wirelessly connected devices, type TimeCapsule. How do I get my Mac mini to find the NAS and set the NAS as a source of data storage?

    I have a ReadyNAS and use it as a Time Machine destination with no problems, even over WiFi. The ReadyNAS and Mac are both on the same LAN (even though the Mac is on WiFi), please check to see if your WiFi is on a different LAN to the Ethernet side of things, I have my Airport set to bridging mode so both sides of the AirPort count as the same LAN.
    Next you need to check you have actually configured Time Machine in the ReadyNAS, as shipped it is initially turned off. You need to go to the ReadyNAS web management interface (FrontView) and then click on Backup on the left, and then select Time Machine. You also need to make sure Bonjour is enabled for the ReadyNAS, this is accessed by clicking on Services on the left and then selecting Discovery Services, make sure all the Bonjour options are ticked on.

Maybe you are looking for