Reset MWI via CCA 3.2(2) UC560

Is there a way to reset the message waiting lights via CCA?

Not that I am aware of, however there is a "Refresh MWI" option in the CUE web interface (http://10.1.10.1/). This does not require CLI and will not harm CCA.
-Dan
Please rate useful posts.

Similar Messages

UC560 SIP Configuration via CCA

We are trying to configure SIP trunks VIA CCA (Latest version) on a UC560 latest version.
However the username and password field doesn't save. When you open CCA SIP trunk configuration the fields are blank, fill them in and save, exist and go back in they are still blank. If you ftp the config off the unit and search for the field "username" only the phones and admins come up - no mention of SIP.
Are we missing something?

Hello,
This sounds like you may have Windows firewall or Anti-virus software running. Also make sure you are using Windows 7 or XP. Windows 8 will not work properly with CCA.
Also if you are using SSL VPN, make sure that only version Anyconnect 2.5.6005 is loaded on the UC. Anything higher will use up the memory and you will not be able to write to the config.
I hope this helps.
Regards,
Chris

Cannot reset device via iTunes (Touch 1st gen)

I'm having serious problems with my iPod Touch 1st Gen.
When starting apps, I get back to the start screen after 2-3 sec.
Cannot sync with iTunes, nor reset device via iTunes.
Is there any way to factory restet the device, by pressing and holding buttons?
Thanks in advance,
Johnny

I don't know if your iPod 1st gen has this but my iPod 4th gen has this thing where you go to settings then general and at the bottom it says reset then click on reset all and earase everything

HT201270 why my Iphone 5 goes into search for days and the only way to get it working is to reset it via itunes. i am on EE network

why my Iphone 5 goes into search for days and the only way to get it working is to reset it via itunes. i am on EE network

Try a SMC reset:
http://support.apple.com/kb/HT3964
Try a NVRAM/PRAM reset:
http://support.apple.com/kb/HT1379
If no joy, take it back, and take full advantage of your warranty!
You also may want to let Apple know about this as well:
http://www.apple.com/feedback//
I wish you the best

Purchase requisition workflow - reset release via BSP and BAPI

Hello,
We have a small workflow to release purchase requisition.
A mail is send to the approver. The approver opens an BSP application to release or refuse the PR.
The approval works well.
The rejection doesn't work well.
I use the BAPI_REQUISITION_RESET_REL_GEN to reset the first release of the PR (00 release key)
We have 00, 01, 02 as release key, and all the release have to pass to release completely the PR.
00 is the requester level.
My problem is :
for example I am the 01 level. I received the mail from 00 level, I refuse the PR via the BSP. In ME53N, the current release key is now 00 but when I look at the workflow, the following agent (corresponding to 02 release key) is determined. Normally nothing has to happen.
Someone has an idea to stop the workflow ?
thanks
Véronique

Hi Martin,
When I checked the contain of container in the workflow (in the log), I saw that the release key is 02.
I don't know why but the WF received the event RELEASESTEPCREATED instead of normaly it is finished.
When I reset the release via ME54N, the WF ends correctly and no new event is received.
How can't I see why the event is started in the BAPI.
In fact it is very strange, if I used the BAPI alone, all works, no new event is started.
But if I used the BAPI in my BSP, a new event is started.
Thanks
Véronique

After resetting password via 10.4 disk, I still need a password to load software

Hello There!
I am in quite of a bind, as I've tried to reset my password via the OSX 10.4 installation disks, but since I've upgraded to 10.6, I'm still required to type in a password of which I've long since have forgotten in order to load software necessary to transfer my *.jpg files to an external HDD.
Any and all help with regard to this matter shall be greatly appreciated, as I am in a major quandry to save my iPhoto images! (I need to load some software to save this precious data on an external HDD)...
Kindest Regards,
David

Thanks!
The more I thought about it, the more this makes sense, as I have upgraded my OSX from the initial version.
Again, thanks for our input!
Regards,
David

Unlock User and Reset Password via DB

Hi,
I've a SAP FI running on Oracle. I have the SAP ID but no password.
I've the access to the Oracle DB. How do I unlock the ID and reset the password via the DB.
Please advise.
TIA !
Desmond

Hi Desmond,
You can unlock SAP user id from DB level, but there is no way you can reset password for SAP user id from DB level.
Below is the command for unlocking user id from DB level.
Connect to orasid.
sqlplus "/as sysdba"
SQL>update sapr3.user02 set uflag=0 where bname='userid' and mandt='<clientno>'; -- for older SAP versions
From ECC 5
SQL>update sap<SID>.user02 set uflag=0 where bname='userid' and mandt='<clientno>';
Thanks,
Phani.

Reset password via OPSS?

ADF 11gR1 PS1
Hi,
I've got user security managed via OPSS APIs (a la Josh Bregman's sample app http://fusionsecurity.blogspot.com/2009/07/opss-sample-application.html ) which is great as it allows some basic user profile management.
With regards to setting/resetting passwords, the APIs only allow the initially setting of a password for a newly created user via
oracle.security.idm.User createUser(java.lang.String p1, char[ ] p2, oracle.security.idm.PropertySet p3), where p2 = password, or changing the password when you already know the old password (like password expiration) via oracle.security.idm.UserProfile.setPassword(char[] p1, char[] p2) where p1 = oldpassword, p2=newpassword.
If the user forgets their password, there's no method that allows me to retrieve the old password, or provide a new password without knowing the old one.
I really rather not drop and recreate the user.
Ideas?

Hi,
the question is if the identity management system provides you the password in clear text. Usually it is considered best practices to not expose the password in clear text. Systems that do this usually use RDBMS tabes to keep track of users, which is what you could do with the RDBMS authentication providers. Since OPSS works with the integrated LDAP server (as far as changing passwords goes) you may want to explore directly accessing the integrated LDAP server. Instead of reading the password, I would suggest to reset it to a new value that the user then can change using the OPSS APIs
However, this forum is not the right one to ask OPSS specific questions (the forum title sys JDeveloper and ADF), so try
WebLogic Server - Security
Frank

HT4798 Resetting password via Apple ID (fail)

Macbook 2010ish. I am changing my password via the Apple ID reset option, which I enabled. It's failing after I go through the process to change it (even to 1234 so I know there is no typo).
10.7.2
I gave this laptop to my daughter and she can login, but I now need to access a few files I left on the machine. I cannot access my account. I made my daughter an administrator and I am also an administrator. I can see that I assigned my account my Apple ID. When I try and login, I choose to reset using the Apple ID. If I enter my Apple ID successfully, I get a screen to reset my password. I reset it to 1234 or 123456 or abCd123& -- whatever. Everything fails once I submit it.
I just need 6 files I worked on last summer (outlines) for a class I start teaching again this summer. Help!
When I am logged in as my daughter, I can visit the Users & Groups and see my account. I have an option to change my daughter's password, but this same option is not available on my account. I checked, "Allow user to reset password using Apple ID" and "Allow user to adminster this computer." I also made sure the Apple ID listed here is the same one I have and use. But I have yet to get this to work when trying to login.

I updated to 10.7.4 hoping that would help. Nope.
As soon as I try and reset the password by using the Master Password or my Apple ID, it fails (wiggles to show it failed). What could be rejecting these password changing attempts?

SSH reset exception via ftp adapter BPEL and ESB

In our BPEL project and our ESB project using FTP adapters everything starts off good connection. files moving, E.T.C. However whenever it pleases it will throw an SSH reset exception. I checked with the admin's of the server's we are connecting to. And they say there should be no reason why Ex. Permissions, connection time your allowed, E.T.C. I observed what happens as these files get picked up and dropped off. (I set up a little test env at home) We have three files moving. So everytime it polls it has to reconnect Just wanted to throw that in there i mean its obvious but. Anywho is there a setting in BPEL.xml or some ESB file that has the TTL for the connection to a server or something or is anyone encountered an SSH reset exception

Are you using Linux servers to run your SSHD? If so, this is a known problem not limited to the SOA Suite. It turns out that there are many issues with this even when you use e.g. Putty. Causes can range from network hardware to certain firewall implementations (masquerading issues). If there's a firewall in play, you might want to give it a try to see if the problem also occurs if you bypass it. IMHO you should try and verify if the connections keep alive 'outside' of the SOA Suite on the same host..
HTH,
Bas

Resetting firmware via factory reset?

Hi,
I have a late 2008 Macbook (the unibody with removable battery one). I want to roll back my firmware to an older version, because apparently I have this weird, discretely released version of the current firmware that doesn't allow third party batteries. However, apparently rolling back the firmware is not easy. I was told by an apple employee that if I do a factory reset I've got about 70-30 chance of this resetting the relevant things.
So basically, I want to back up my files, but I don't want to use an application that carries over everything (like time machine) since I want all the system stuff to be reset. Basically, I want to drag n' drop. But of course, I want to drag and drop so as many things stay working as possible. Any tips here? For example, can I just drag and drop the applications folder, or will I want to include the "Library" folder if I want thing to actually work? Or am I better off just reinstalling applications?
Thanks in advance!

Firmware only goes forward, if one bricks your machine Apple just replaces your logicboard or if they can't your out of luck.
However I've read stories/threads online it's possible to downgrade the firmware, but I don't know where I saw it.
This is the method to reinstall the firmware in case it gets lost out of NVRAM or botched update, but it won't downgrade it according to Apple.
Restoring firmware on Intel Mac's
So now you at least know how to reinstall the firmware, but I've read the downgrade can occur in place somehow.
Sorry I don't have any more information, you'll have to search the more geekier Mac hacking sites.
Ask on MacRumors.com, there are a lot of hackers there or can point you in the right direction if it exists.

EA6900 - Unable to Change to Bridge Mode or Reset router Via Smart Wi-fi

I am unable to change to Bridge mode to do a reset of the router from within the software. There is no option to change it to Bridge. And under Diagnostics, there is no option to Reset. I am trying first and foremost to set the IP scheme to the same as my DSL router. I would rather not put it in Bridge mode. I have tried setting the IP out of the range of the DSL router, and within the same scheme.
It does not work. This is the most current version of the firmware.

Hi Dr. Tek, You can try to reset the router for 30 seconds and power cycle it after. Try to access the Linksys Smart Wi-Fi software again and check if you can change the connection type to bridge mode. You can also use another internet browser to isolate the problem.

Intercept action of hardware reset button via acpid?

Hi there,
the wiki explains how you can change the behaviour of the hardware power button on your system to perform a certain action (for example /sbin/shutdown -r now for a clean system halt).
I was just wondering if the same can be applied to the reset button?
Regards,
demian
Last edited by demian (2010-04-14 13:43:15)

I don't think so, the reset button triggers a hardware reset, the OS has nothing to do with it (it works as soon as you power up the computer, and still after a full and dirty system crash that leaves no other option than euthanasia)

HT1212 My screen is messed up and I need to reset my phone any way to override the passphrase and reset phone via USB connection?

I need help resetting my phone!

Depends, if you've synced with this iTunes, while that passcode was enabled, you won't be prompted to enter the passcode when connecting your phone. If you have not synced, while that passcode was enabled, you will. So, if you fall in the later, there is no way to do what you want.

Possible to reset CMOS via software?

I read somewhere in the forum that someone did that by using Live Update (or Live monitor). How?

No - it is NOT possible to clear CMOS using software - it is a hardware jumper on your motherboard.
Live Update is MSI software to update your BIOS to newer versions when they are released. Beware, only use this Windows software method if you have a stable Windows environment and good power supply as any failure will kill your motherboard.

Reset MWI via CCA 3.2(2) UC560

Similar Messages

Maybe you are looking for