Reset Order By back to default

When the user logs into the application, if he/she reorders her report by a specific field then exits, the application saves the new order by. When he/she logs back in, the report shows the previous order by rather than the system default. I would like it so that the order by always defaults back to what I specified.
Also, is there a way to get multiple order by's? (Like in sql, we can order by 1,2,3...)
Thanks,
Yvette

The multiple order by you can get only if you hardcode it in the SQL.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://htmldb.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Similar Messages

Recent Updates reset my Mac back to defaults (Intel iMac)

On Wednesday (01 Mar) I did ran System Update and installed all updates for my 17" Intel Duo iMac, all appeared to go fine.
I'm not sure what happened today. First of all Safari crashed and I had to do a force quit. After that I ran Front Row for the first since the updates, watched a MPG movie (which took forever to load) and an iPhoto slideshow. Once I exited FrontRow my system was restored to its defaults.
All my iCal data was gone, all my widgets had gone and only the defaults were show. My dock had reverted back to defaults, the menu bar clock and location of icons were reset. Bluetooth was turned on again, when I started iTunes it did the whole you never used this application before and than went and searched my HDD for music.
I'm not sure what went on, my personal files were not deleted I don't think anyway, and all Safari bookmarks were maintained but the tabs and homepage were set back to defaults. I'm currently getting my Mac back to the way I like it. But something very wrong happened and it's a glitch which must be associated with the recent software update. I only got the Mac on Monday so the only software I have installed is what came with it.
Did anyone else experience similar problems?

You may have run into the issue covered by this article:
http://docs.info.apple.com/article.html?artnum=107854

Unable to reset 831 router back to default settings

I need help with setting up my cisco 831 sdm k9 router. It was up running just fine but I ran the write-erase command to start over, little did I know that resting back to complete factory defaults did not work. The router did not go back to as if it where when I recieved it and plugged it in and followed the steps with using SDM.
Does anyone know how to set it back up so that I can configure it?
I have gone through the steps as listed at in the (reset to for mainline 12.3) to reset the router back to factory defaults and still no luck. All I need is to get the router reset back to how it was right out of the box so I can re-configure it.
running: IOS 12.3(8)T7

sho ver ressult:
Cisco IOS Software, C831 Software (C831-K9O3Y6-M), Version 12.3(8)T7, RELEASE SO
FTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Sat 12-Mar-05 09:03 by ccai
ROM: System Bootstrap, Version 12.2(11r)YV3, RELEASE SOFTWARE (fc2)
SPPDCHN-INFRA-831 uptime is 32 minutes
System returned to ROM by power-on
System image file is "flash:c831-k9o3y6-mz.123-8.T7.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:Cisco IOS Software, C831 Software (C831-K9O3Y6-M), Version 12.3(8)T7, RELEASE SO
FTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Sat 12-Mar-05 09:03 by ccai
ROM: System Bootstrap, Version 12.2(11r)YV3, RELEASE SOFTWARE (fc2)
SPPDCHN-INFRA-831 uptime is 32 minutes
System returned to ROM by power-on
System image file is "flash:c831-k9o3y6-mz.123-8.T7.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Cisco C831 (MPC857DSL) processor (revision 0x500) with 58983K/6553K bytes of mem
ory.
Processor board ID FHK091522E8 (933743407), with hardware revision 0000
CPU rev number 7
2 Ethernet interfaces
4 FastEthernet interfaces
128K bytes of NVRAM.
16384K bytes of processor board System flash (Read/Write)
2048K bytes of processor board Web flash (Read/Write)
Configuration register is 0x2102
sho running config results:
Current configuration : 956 bytes
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Router
boot-start-marker
boot-end-marker
enable secret *****************
enable password ****************
no aaa new-model
ip subnet-zero
no ip domain lookup
ip ips po max-events 100
no ftp-server write-enable
interface Ethernet0
ip address 10.10.10.1 255.255.255.0
interface Ethernet1
no ip address
shutdown
duplex auto
interface FastEthernet1
no ip address
duplex auto
speed auto
interface FastEthernet2
no ip address
duplex auto
speed auto
interface FastEthernet3
no ip address
duplex auto
speed auto
interface FastEthernet4
no ip address
duplex auto
speed auto
ip classless
ip http server
no ip http secure-server
control-plane
line con 0
interface FastEthernet4
no ip address
duplex auto
speed auto
ip classless
ip http server
no ip http secure-server
control-plane
line con 0
no modem enable
line aux 0
line vty 0 4
login
scheduler max-task-time 5000
end

How to: Resetting install location back to "Default Location..." (Windows 8)

I recently upgraded my PC and added an SSD as my primary drive. Like most people, I also have a secondary drive for most apps and files. In the Creative Cloud App manager, I changed the Installation location to a directory on my secondary drive. The problem was, Some applications I wanted on my SSD for performance reasons and there was no way to change back to the setting "Default location..." Because CC installs both a 32 bit and 64 bit version of some applications, I wanted to make sure that it put them in the correct "Program Files" or "Program Files (x86)" folders. After some poking about in the config files I finally found out how to do it.
(NOTE: The path below is for Windows 8 and possibly Windows 7, for other OS's it will likely be in a similiar path)
Close the Adobe Creative Cloud app (File > Quit)
Open this file in notepad: C:\Users\ExampleUser\AppData\Local\Adobe\OOBE\com.adobe.accc.apps.....prefs
Search through the text untill you find the install location that you set. Mine was "E:\Program Files\"
Delete only that path (leave the <) and then save the file.
Relaunch the Adobe Creative Cloud app
Then check the Install Location in Preferences. It should now be set back to "Default Location..."

For Mac OS X (Yosemite) I found you need to do the following:
1. Quit the Creative Cloud Application in the title bar.
2. Open Activity Monitor, find the Process named "Adobe Desktop Service". Click the stop sign icon with an "x" in it and select Quit to stop this process.
3. Edit the file ~/Library/Application Support/Adobe/OOBE/com.adobe.accc.apps.....prefs
a. Same as in the Windows case, find the line with "installLocation" and delete everything containing a file path between the following ">" and "<"
4. Restart Adobe Creative Cloud from /Applications/Adobe Creative Cloud/Adobe Creative Cloud

What is execution order of backing bean default methods ?

Hi
Thank you for reading my post.
what is execution order of backing bean methods like :
constructor . init , preproccess , prerender .. ?
thanks

Hi
Thank you for reading my post.
what is execution order of backing bean methods like
constructor . init , preproccess , prerender .. ?So far, so good. That is the order. However, preprocess is only called on postback and prerender is only called if the page is going to be rendered.
To learn about these methods and when/how they are called.
http://developers.sun.com/prodtech/javatools/jscreator/reference/fi/2/event-life-cycle.html
http://blogs.sun.com/roller/page/dashboy?entry=java_studio_creator_lifecycle_q1
http://blogs.sun.com/roller/page/divas?entry=about_a_page_s_lifecycle

Reset printer config back to default, want to reuse ePrint email address

Hello,
I have an HP LaserJet 200 ColorMFP 276nw that I had associated to an ePrint email address. I forgot what I set the Admin password to, so I had to reset the printer to default settings (turned printer off, pressed and held on the lower-left part of the touch screen, turned printer on until it read "Permanent storage init.").
Once that was done, I re-installed web services and added ePrint back to the printer. Now I'm trying to use the same ePrint address that the printer had before, and I keep getting told that the address is already taken.
Is there a way to keep that address, or do I have to use a new one?
Thanks,
Michael

Hello Michael,
Thank you for joining the HP Support community. I understand that you had to reset your Laserjet 200 and during the process lost your ePrint email address.
That ePrint email address will not become available again, you will need to use/create a new one. I'm sorry if this has caused any inconvenience.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

How to reset report output back to default language.

Hello Everyone,
I am working on 11i to R12 up-gradation process.
I need to move some reports from 11i to R12 and resolve bugs which report faces after shifting.
I am working on one report of output type : PDF named 'Delivery Note Report' in SCM-Order Management,
It is a RDF with template report and not XML publisher(there is no separate RTF).
RDF template is prepared with English text.
In 11i report output comes in EN-US(Standard English) language
whereas in R12 it is coming in Kenyan language.
I need to set output language to default EN-US, how can I proceed ?
Thanks
Sudbun

Hello Experts,
I checked user preferences : it is set to EN-US
I checked concurrent program language details : it is American English
I got to know about a file named : uifont.ali (present in middle tier /ora/R12/apps/tech_st/10.1.2/guicommon/tk/admin)
it contains PDF:subset section in it we can specify the particular language/font in which we want output of our report.
I tried replacing this section with default language and restarted report server, even I tried removing that file from middle tier(just for testing purpose).
Can anyone suggest any other approach as still the issue exist.
Kindly reply.
Regards
sudbun

After updating firefox to 6.0.1 and again after 6.0.2, Firefox checks compatibility of add-ons on EVERY start, and also resets the homepage back to default. How can I fix this?

The problem persists with Firefox in Safe Mode

See:
*https://support.mozilla.com/kb/Preferences+are+not+saved
*http://kb.mozillazine.org/Preferences_not_saved
* https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox

I have a iPhone 5. In usage, it says i have 2.1 gigs used because of photos and camera. I have deleted all my photos via iPhoto and now reset the phone back to factory settings in order to try to solve this problem, to no avail. Help!

I have a iPhone 5. In usage, it says i have 2.1 gigs used because of photos and camera. I have deleted all my photos via iPhoto and now reset the phone back to factory settings in order to try to solve this problem, to no avail. Both iTunes and the phone say that 2.1 gigs are being used, even though the phone now has nothing on it. What is going on?

Yeah it works fine over wifi the problem is when I try to use it over my 3G. It's really stressing me out now.

My daughters ipod 4th gen will no longer charge past 20% and will not connect to a pc in order to back everything up. the cable is working fine, otherwise it would not even charge to the 20%. i have tried the reset to not lose any data and no luck. help!

my daughters ipod 4th gen will no longer charge past 20% and will not connect to a pc in order to back everything up. the cable is working fine, otherwise it would not even charge to the 20%. i have tried the reset to not lose any data and no luck, home+power for 10-15 seconds. I really would like to not lose everything she has, again, because I can't back it up this time. I have tried charging via a wall outlet and PC and both charge fine, just only to 20%. I am using the cable that came with it so no aftermarket issues there. Please help so I don't have to reset everything again.

Because once it has charged enough to be powered on as soon as you turn it on it says battery is at 20% and will not charge anymore after that, it just runs for about 5-10 minutes before the battery dies again. The battery cycles discharge/recharge daily and its not on the charger at full charge for more than a couple hours and is never totally dead for more than a couple of hours.

How to reset all the icon spacing etc in Finder back to default?

I have tried to set back to the default values but it's still isn't quite the same as before -- the horizontal spacing is correct but not the vertical one. Is there a way to reset the icon spacing as default?
Thank you.

John Guo wrote:
Try this... Go to User Name>Library>Preferences. Locate the "com.apple.finder.plist" file. Trash that. Press optionesc. That brings out the force quit icon. Restart Finder. See if anything changes.
Your not done... That will set the user defined defaults back to the Apple defined defaults. To get your folders to use the Apple defined defaults, open up a folder showing the wrong spacing and press Command-J to bring up the View Options window. At the bottom of the View Options window there is a button that says "Use as Defaults". Press the Option Key and the "Use as Defaults" button will change to "Restore to Defaults". Click the "Restore to Defaults" button and the folder will go back to the Apple defined default settings. You might need to Control-click on the window for the folder and select "Clean Up" to get things lined up. Good luck...

How do I reset my software updates to default back to the apple updates ser

How do I reset my software updates to default back to the apple updates server. I used ARD to send a unix command to download the software from my test server but now I don't know the exact path to point it back to the apple updates server. Below is the command line I sent via ARD. I appreciate any help.
defaults write com.apple.SoftwareUpdate CatalogURL http://mobileserver.virtualco.com:8088/index.sucatalog

Niel, I appreciated the help and quick response. A friend did email me that exact command line and it work. john

After uninstall, reinstall, and reset, I cannot get Firefox back to defaults. How can I?

I successfully uninstalled Firefox. Then I reinstalled it. All the presets and addons were STILL there. Then I tried a reset. That only cleared my homepage, but all the addons and plugins are there. I want this to be back to default. How can i do that?

''Gnospen [[#answer-692497|said]]''
<blockquote>
How do you want it to be and why?
</blockquote>
I guess I'll have to repeat myself for the third time. I want firefox to be back to the default.
''Gnospen [[#answer-692497|said]]''
<blockquote>
remember we are just users not employees at mozilla so take out you frustration some other way.
</blockquote>
I completely understand your are not an employee. I'm not angry because the program doesn't work. I'm upset because contributors don't take the time to read my post before making suggestions that I've already tried.
To reiterate, I want Firefox to be back to defaults. Obviously there is a malware/spyware/virus problem. How do i get back to the defaults? I found and read all the Mozilla support posts about "resetting," and as I said, that does not work. So... (understanding my situation) how do I get back to the firefox defaults?

I accidentally reset Firefox back to default, can my mistake be undone?

I was troubleshooting on how to fix a problem with Firefox running extremely slow and somehow accidentally clicked on the Reset Firefox to its default state button. I lost all my saved passwords, user ID's, addon extensions, etc. Can this be undone? I've even tried to reset my computer back prior to a date with no luck. I have Firefox version 32 and run Windows 7 professional.

These add-ons can be a great help by backing up and restoring Firefox
'''[https://addons.mozilla.org/en-US/firefox/addon/febe/ FEBE (Firefox Environment Backup Extension)]''' {web link}
FEBE allows you to quickly and easily backup your
Firefox extensions, history, passwords, and more.
In fact, it goes beyond just backing up -- It will actually rebuild
your saved files individually into installable .xpi files.
It will also make backup of files that you choose.
'''[https://addons.mozilla.org/en-US/firefox/addon/opie/ OPIE]''' {web link}
Import/Export extension preferences

Recently had to reset my computer back to factory default settings

I recently had to reset my computer back to factory default settings due to a possible keylogger hidden somewhere on my computer. When I did this, I forgot to transfer all of my songs onto my iPod before I did it, which wiped all of my songs off of my computer. I recently re-installed iTunes and I need to know if there is a way to recover the songs I had purchased previously?
Whenever I try to "Buy Song", it takes me to the receipt of the song, but won't download it. Any suggestions?

have a look here: http://discussions.apple.com/thread.jspa?threadID=1305197

Reset Order By back to default

Similar Messages

Maybe you are looking for