Reset results in zoomed in screen and i cannot sign in.
I performed a reset by pushing the stop button and the start button simultaneously. After the reset, when I try to start the phone the sign in screen is zoomed in so I only see 1 or 2 buttons on the keypad and i cannot sign in.
Hi, rwbenson.
Thank you for visiting Apple Support Communities.
This sounds like you may have enabled the Zoom feature. Here are the steps on how to disable this feature.
iOS: Home screen icons are magnified or large
http://support.apple.com/kb/ts3129
Cheers,
Jason H.
Similar Messages
-
Hello. My Ipad has a blue screen, and I cannot reset because it is passcode-locked.
Force iPad into Recovery Mode (Step by Step)
1. Hold Sleep/Wake button down and slide to turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
5. Release Home button.
On Computer
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"... -
White glowing screen and I cannot turn off and or reset. Just glows white
white glowing screen and I cannot turn off and or reset. Just glows.
Try the remaining actions of:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
After logging in, theres just a blank white backlit screen and I cannot go further. It also has been showing on the screen
that the startup disk is full. I already tried diagnostics and it says hardware is fine.You will have to erase your drive because it has a corrupted directory resulting from allowing the drive to become full.
Install or Reinstall OS X from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
the Security button and set the Zero Data option to one-pass. Click on
the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
I have just buy a ipad. But I am using chrome browser, I touch around screen for into mutiltasking then it is hang, turn off screen and I cannot open it again. Please, someone can explain for me ?
Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
My child reset the password on the iPad and now cannot remember it. How do I reset it?
My child reset the passcode on the iPad and now cannot remember it. How do I reset it?
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
HT201407 My iPad has a iCloud Backup message that stays on the screen and I cannot open the iPad
My IPad is frozen. A message is displayed "I Cloud Backup....." Message stays on screen and I cannot access Ipad
Try a reset:
1. Hold the Sleep and Home button down (together) for about 10 seconds
2. Until you see the Apple logo (very important) -
Trying to start my IMac click on my admin icon and enter the correct password but then flashes to white screen and back to sign in, my desktop wont come on ... help!!!!
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
When the menubar appears select Terminal from the Utilities menu. Enter resetpassword at the prompt and press RETURN. Follow instructions in the dialog window that will appear.
Or see Reset a Mac OS X 10.7 Lion Password and OS X Lion- Apple ID can be used to reset your user account password. -
I hit the magnifier tool on my iPad and now it only shows a portion of the screen and I cannot get out of it. What do I do?
Which magnifier tool are you referring to? If you double-tap with 3 fingers it should disable zoom. Then you can go into Setttings>Accessibility>Zoom and turn it off.
-
So like a moron, I made the mistake of finally updating my Iphone 4's OS to the new one that Apple has been bugging the crap out of me about for months now. The problem is, my phone is now stuck on the loading screen and I cannot get it to do *ANYTHING*. It won't connect to my PC, Itunes won't let me get on it without the pin lock being entered on the phone which I CANNOT do because the phone is stuck on the update screen.. and Apple won't talk to me for help because I cannot get them the serial number which I CANNOT do because my phone is stuck on the update screen!
Is there no way to just take the battery out or something? I looked for screws but they seem to be proprietary (because of course they are, because Apple) How do I force it to get off the update screen?!If you open it to take out the battery from the iPhone then you forfeit all service for whatever reason from Apple in the future.
Have you attempt to connect it to your computer and then restore it from iTunes on your computer? -
My Photoshop CS 5 has some strange actions when I copy a portion of a photo using the clone stamp to transfer to another part of the image. It carries the entire layer (not just the stamps selection) across the screen and I cannot place it where I need to. It appears as if I selected the entire layer on purpose (which I did not)
The below items appeared when I opened Photoshop CS 5:
“Photoshop has encountered a problem with the display driver and has temporarily disabled G & U enhancements. Check the video card malfunctions website for latest software. GPU enhancements can be enabled in the performance panel of preferences.”
(I believe this started after the automatically updated Windows was applied. It was coincident with the before mentioned problem . . . but I don’t really know if it had anything to do with it. )For the Clone Stamp problem, check the Clone Source panel and Clipped is probably unchecked.
If so, check Clipped and see if that makes a difference.
(Window>Clone Source)
As to the video card problem:
Which version of windows are you using?
What is the make and model of your graphics card?
Do you know which update windows installed? -
whenever i type something in google or any other website a find tab pink colour comes beneath the screen and i cannot ype anything on google. whatever i type goes in the find tab and i cannot type anything on website......plz help
== This happened ==
Every time Firefox opened
== 10 days agoDo a malware check with a few malware scan programs.
You need to use all programs because each detects different malware.
Make sure that you update each program to get the latest version of the database.
http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
http://www.superantispyware.com/ - SuperAntispyware
http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]] -
I have a old firefox account and I cannot sign on too. I made new account just to ask a question. I tried to sign in with old emails, but did not get any reset information back. How can I recover old information?
Backing up and restoring your Profile should have included your bookmarks.
https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles
https://support.mozilla.org/en-US/kb/recovering-important-data-from-an-old-profile
That looks like a JSON bookmarks backup file, from 11-01-2012. Did you try '''restoring''' that file?
https://support.mozilla.org/en-US/kb/restore-bookmarks-from-backup-or-move-them#w_using-a-bookmark-backup-file
Never messed with JSON files other than viewing them on a few occasions out of curiosity. There are no line breaks which make them very difficult to read.
As far as working with that file in {like} NotePad goes:
A. use Find / Search for each indecent of a '''"uri"''' string, then "copy and paste" the uri into another text file, and then move on to the next "uri" string.
B. use a text program where a filter can be set for the "uri" field in the JSON file for a line break or to "scrape out" the "uri"s only for display or export to a list of uri's.
Or try using an online JSON editor like this, to try to display only the "uri" field.
https://www.jsoneditoronline.org/ -
When opening Powerpoint, the file opens outside of the screen, and I cannot use it, nor can I open a new ppt. How do I rectify this?
Usually the Window menu allows you to adjust window placement in Microsoft Office products.
If not, connect an external display or projector and change the resolution to the maximum.
Save the document with the window residing on the main screen with the Dock.
That will force it to open on the main screen in the future. -
My Mac can't get passed gray screen, and I cannot boot from cd. Help!
My Mac can't get passed gray screen, and I cannot boot from cd. Help!
Grey Screen
https://support.apple.com/kb/TS2570
https://discussions.apple.com/message/16276201#16276201
Maybe you are looking for
-
My OSX 10.5.8 won't type letters f,r and number 4
my OSX 10.5.8 won't type letters f,r and number 4, also the caps lock will not work, How can I fix this? It happened after I held the D tyring to get the computer to do a self diagnostic. I was also trying to change the language on the computer to E
-
Limit, filter, or sort images in the Faces pool?
Hi. How can I limit, filter, or sort the images Aperture presents when "Confirm Faces" is clicked in Faces view of a named Face? I would like to either: . Limit the universe of presented images with unnamed faces to those from specific Projects; or
-
Sometimes when we place a copy of a slideshow on another computer we get a warning message that some images are missing. Is there any way to ensure all images are embedded?
-
MDX Formula - Not Getting the Desired Results
Hi All, I have the following formula that I am using to calculate the "Average Daily Volume MTD" but if I drilldown into the Products dimension then I don't see any values. It seems like it's only calculating the values at the top level (GEN1). CASE
-
SAP router installation for VPN method
Hi All, Can any one share me the steps to perform SAP Router Configuration with VPN method. Also what are changes i need to make in saproutab file. Appreciate your inputs. Thanks Pradeep.