Reset & reverse document with open item managed and none open item managed

Dear forum,
I would like to confirm the below.
If i have a posted document where the double entry has open item managed account and none open item managed account and where the open item managed account is cleared, how can i reverse this document.
The problem now is FBRA cannot reset and reverse (as the document partly has none open item managed account) and FB08 also cannot reverse (as part of the account is open item managed account and it is cleared).
Besides manually reverse via FB01, any other method?
Thanks
Moderator: Please, avoid asking basic questions

Which document are you trying to clear using FBRA? You should reset the "clearing document" using FBRA; not the original document that has one open item and one non-open item. Once you reset the clearing document using FBRA, you should then be able to reverse the original document (the one that has one open item and one non-open item) using FB08.

Similar Messages

Problem with Reversed document with IDOC interface

I have a problem when I create Idoc which will reverse a document.
I use ACC_DOCUMENT_REVERSE, in Idoc is filled like this -
OBJ_TYPE ( BKPFF )
OBJ_KEY( reverse document number + company code + year)
OBJ_SYS ( system id )
OBJ_KEY_R ( obj_key of document which will reverse )
PSTNG_DATE
COMP_CODE
REASON_REV
I formed OBJ_KEY with one select from table bkpf, and get the last number of documents reversed with Idoc interface. The interface creates Idoc reverse document with number 929xxxxxxx. With fb08 - documents created are 92xxxxxxxx.
The problem is when use transaction fs10n, fill customer account number, and the sums are not right. The documents which was reversed with Idoc did not entered in G/L Account Line Item.
But if I start transaction fbl5n - customer line item, the documents reversed by Idoc is there, and the total sum is right.
How can I resolve this problem?
Greetings,
Lazar Hristov

Hi,
I hope you have reversed the posting.Have you cancelled the downpayment invoice.
Please cancel the first downpayment invoice and post the amount for the second downpayment.
Now try to create the final invoice.
Regards,
Krishna.

Created a document with FM Author 12 and added a template in FM12 to the document

Created a document with FM Author 12 and added a template in FM12 to the document. Can't open the document again in FM Author 12 "This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel".

Should both programs be in "Authoring" mode?

When I save a document in Microsoft Word 2010 and then open it, I am unable to read it

When I save a document in Microsoft Word 2010 and then open it, I am unable to read it because it is gibberish with all kinds of symbols and numbers. I understand it has something to do with Adobe Reader. Has anyone else had this problem and how do I correct it?

Put your cursor on the icon of one of your scanned documents. Click on the right button of your mouse. In the list that will appear, put your cursor on Properties and click on the left button of your mouse. In the window that you'll get, read and make a note of what you see next to "File type" and "Opens with". Then post here what you saw.
If you don't understand these instructions, please ask for more details.

Create reversal document with BAPI: BAPI_ACC_DOCUMENT_POST.

Hi Guys,
I am Create reversal document with BAPI: BAPI_ACC_DOCUMENT_POST.First I am post financial document with BAPI BAPI_ACC_DOCUMENT_POST and Same Document. i am Reversal with same BAPI 'BAPI_ACC_DOCUMENT_POST'.
New reversal docment is created. but posting key are not changingin reversal docment.whatever posting key created in posting same posting key are created while reversal also.Please help me

check
Mapping of POSTING KEY in BAPI_ACC_DOCUMENT_POST

I am trying to save a document with the new pages and it will only save as a zip file any ideas on how to change this?

I am trying to save a document with the new Pages and it is only saving as a ZIP file anyone know how to fix this or choose a different file type?

Take a look at the FileSelector
First make sure the FileSelector is expanded so you can see the directory and sidebar. That's what the little disclosure triangle up by the filename is for. Once the FS has been expanded to look like the above picture, look to see what subdirectory has been selected. Use the SideBar to select an appropriate one.

Cannot sign documents with Adobe Reader 10.1.3 - 10.1.10, Can sign document with 10.1.2 and 11.0.07

Cannot sign documents with Adobe Reader 10.1.3 - 10.1.10, Can sign document with 10.1.2 and 11.0.07
In my environment, we have 10.1.2 that's currently packaged. Our CIO was able to sign documents via signature with no problem. Later he got updated to 10.1.9, no longer can sign.
During testing I was able to confirm that 10.1.2 signed without problems, but anything that, it goes kaput, the Sign and options are not listed.
Latest Adobe Reader can sign... any ideas?

I'm having a similar problem. What I'm trying to do is print a Microsoft Word 2010 document with paper size A4 to Adobe pdf document paper size A4. I select "A4" for paper size in word and then print using Adobe print standard settings. What I get is an Adobe document in 8.5 x 11. This is an issue because these are patent documents for electronic filing in WIPO and they must be in A4 size.
If I select other sizes in Word, such as A3, Tabloid, and Legal, the Adobe file is in the same paper size.
If I print a Powerpoint document in A4 to Adobe, the Adobe file page size is A4.
If I print an Adobe file in 8.5 x11 to Adobe A4, the second Adobe file is in A4.
Any help?

My school has a website. The professor uploads files in Word. When I click on the link at home using Pages, the download window opens with nothing in it and Safari opens with a blank in the address book. What Could be wrong? Wrong set up?

My school has a website. The professor uploads files in Word. When I click on the link at home using Pages, the download window opens with nothing in it and Safari opens with a blank in the address book. What Could be wrong? Wrong set up?

Hi Jo,
If I'm interpreting this correctly, the Word file downloads correctly, but when you open it in Pages, the link(s) which your instructor has embedded in the Word file are not correctly translated into Pages.
If the link shows the actual address, you should be able to copy that and paste it into the location bar in Safari, press return, and get to the website that way.
An alternate route might be to download one of the open source Office applications, OpenOffice.org, LibreOffice, or NeoOffice. These are written to more closely emulate the behaviours of MS Word than Pages, and may provide better support for links embedded in Word files.
Regards,
Barry

Am I correct that Photos does not support external editors? i.e., in Aperture, I click Photos Edit with.... and can open in Photoshop or various plug-ins. Changes are then automatically saved back to Aperture. Nonexistent in Photos?

Am I correct that Photos does not support external editors? i.e., in Aperture, I click Photos > Edit with.... and can open in Photoshop or various plug-ins. Changes are then automatically saved back to Aperture. Nonexistent in Photos?

Thanks Larry. That certainly gives me some understanding. Can't imagine I'm the only Aperture user with that concern, so I certainly hope Adobe and others will fill the void. Without that feature, Photos is pretty much a non-started for me.

I tried to open a bookmark and it opened in an active window as a frame, not a separate tab or window. What's going on?

I've been having problems with Firefox hanging (seems related to Flash on a particular website). Through hours of troubleshooting yesterday, including on the phone with my ISP's help desk, it was recommended I "refresh" Firefox. I've done that before, and I did it yesterday again. This morning I opened Firefox to my home page (my ISP's portal), checked my email, logged out of email, closed that tab, opened two other forums and Photobucket--three tabs open in the window--to post photos and contribute to discussions in both forums. When done, I logged out of both forums and Photobucket, closed each tab separately, then quit Firefox. (While in Photobucket, Flash crashed several times....but that's not unusual with Photobucket in my experience. It's a different problem I am still dealing with....but forget it right now....) As part of yesterday's "refresh", I set Firefox to empty the cache and cookies and other files upon quitting.
Later in the day today, I opened Firefox, my ISP's portal opened as usual and expected (my "Home page"). Sometimes, rather than close that window/tab, I just open a bookmark and it opens in that same window, but replacing the previous window and its contents. That is normal operating procedure for me. You know, rather than having two windows open where I'll have to close the first one, I just have the bookmark open in place of the original window/contents.
Today (and it's happened before today, but only infrequently), the bookmarked page opened as if it was a frame in the active window....that is, my ISP's portal occupies about 3/4 of the window, but over on the left side of the window (not another tab or window, but in the very same window) is a slender partial view of the bookmarked page. This new web page--totally unrelated to the original page--has a scroll bar at the bottom, but can't be made to fill the window....the previously opened web page acts as a barrier to seeing the "new" frame/web page. While I can grab the right border of this "new frame" and drag it to the right, it still can't push the "old" original web page out of the way....the old page reaches some minimum limit and I get a split screen view of two entirely different web sites contained in exactly the same active window.
The "new" frame has an "x" in the upper right corner, so I could close it.....but my question is, why did it open in a completely different company's web page/window....how can two web pages from completely different organizations/companies/websites occupy the same active window in Firefox? I have screenshots.....attached. And, oh yes, besides the HOW and WHY of it, how can it be prevented (or is the best thing to just right click and open it in a new tab or window.....??????) That still doesn't satisfy me....I'm someone who needs to know WHY something happened that should not have happened. It makes me crazy when something strange happens and the "solution" is to change MY behavior. (You know, like if YOU were the problem, but I have to change MY behavior instead of fix what's wrong with YOU.....when fixing YOU might render the entire situation obsolete.)
Thanks for whatever you can suss out.....

You do not have the properties in the Bookmarks Manager (Library), but you should have it if you right-click a bookmark the Bookmarks Toolbar or in the bookmarks sidebar.
On Mac you probably do not have it if you right-click an item in the Bookmarks menu (this menu is under control of the Mac OS), but I assume that this should work if you click the "Show your bookmarks" button on the Navigation Toolbar that is next to the star to bookmark the current tab and right-click an item in the bookmarks list that opens.

Unit of measure for Stock and Non-stock Item in CJ20N

When I attach Material to an activity (item Category N Non-stock item) in Project Builder (CJ20N), It is peaking its Base unit of Measure as unit. Now when I try to change it, it is showing an error
Item category N: Only base unit of measure M allowed
Message no. CO344
But for the same material if I change the item Category to L Stock item, then it allows me to change the unit.
Please guide me regarding this Behavior. Is there any customization, by doing which it will allow me do the same for Non-stock Item or It is not Possible.

firstly I am assuming that the activity is internal processing type - doesn't matter really
now to attach a material select actvity and from the template area click and drag material which will open the material detail screen in the work area
because it is a non stock item I am assuming text description - in the requirements qty you enter the qty and next to it the units - changeable
if you choose a material number maintained as material master then obviously the unit will be from the material master.
If you are using an externally processing activity then in config check OPUU for the network type and see if order unit has been populated - that might be the problem

Is it possible to add value item and non stock item in one billing?

Is it possible to add value item and non stock item in one billing?

Hi,
Yes,it is possible .Take example of service scenario,where material used in servicing and service charges(labour) can be billed in single invoice.
Billing document type,Customer and other header data should be same.
Reward points if useful
Regards,
Amrish Purohit

T.code required for Vendor line item display and Customer line item display

Hi Gurus,
Pl provide me transaction code for "Vendor line item display and " Customer line item display apart from FBL1n for vendor and FBL5n for customers.
Kindly advise.
Regards,
Samar

Hi,
You could use these, for example:
S_ALR_87012103 - List of Vendor Line Items
S_ALR_87012197 - List of Customer Line Items
Just curious: what's wrong with FBL1(5)N?
Regards,
Eli

Stock and NON-Stock Items procurement

Hi,
Please let me know why classic scenario cannot be used fpor Stock items and Extended classic can be used for both stock and non-stock items.
What is the exact difference.
Regards,
Manu

Hi Sanjeev,
Thanks for the reply.
But if PR is transferred to SRM from MM and classic scenario is used and the resultant PO is created in MM then will transfer the PR with/without account assignment.
Pls let me know.
Thanks,
Manu

How to identify Inventory and non inventory items

Dear all,
what are the ways to differentiate inventoried and non inventoried items.
please advise. thanks.
Thanks and regards
Udaya

he means the purchase order item category which can be seen in transaction ME23N.
You never made clear if you want differentiate in SAP or the physical stock in the warehouse.
As already explained by another one, in SAP you can procure one material number either to stock or to be expensed immediatly while receiving.
However, physically you dont see any difference, you have to take organizational measures to not store expensed material together with material procured to stock.
Even further, you should try to receive items which are not procured to be stored, at a different physical receiving place.
In MIGO transaction at item detail in tab WHERE you will see a storage location if the material is to be stored in your warehouse, but you will not see a location if the material is procured directly to a project or cost center. then you see a receipient instead .

Reset & reverse document with open item managed and none open item managed

Similar Messages

Maybe you are looking for