Reset SMD-Configuration data for the solution

Hello!
I would like to know how to reset the configuration data for the solution in SMD wizard.
The solution has already the status "green" --> "This solution is ready for Diagnostics".
The problem is that I cannot change the settings for the server ("Setup parameters").
The instance number there (98) cannot be changed.
Further question:
how to install the introscope agent via SMD Wizard?
If I choose the solution and press "Setup Introscope Agent" I get the warning:
The landscape definition of the selected system is empty. Operation has been aborted
Furthermore I cannot see any parameters:
neigther for Server Node Details nor for Current VM Parameters. Here I get the warning:
There is no detail available for this server node. Check the Last Operation Result pane for more information.
Any helpful information wil be appreciated.
Thank you very much!
regards
Thom

Hi Thom,
To reset configuration there is possibility to remove Landscape Info using
Diagnostics Administration -> Diagnostics System -> Landscape management.
For your issue with Wily, you must have a solution correctly define. this setup will not work until you have it.
Frederic

Similar Messages

The boot configuration data for your Pc is missing or contains errors: error code 0x000014c

Hello,
See if any body may help here... I get this blue screen:
RECOVERY
Your PC needs to be repaired:
The Boot Configuration Data for your PC is missing or contains errors.
file:\\EFI\Microsoft\Boot\BCD
Error code: 0xc000014c
You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a a disc or USB device), contact your system administrator or PC manufacturer.
Press Esc for UEFI Firmware Settings
First I was able to get into the option 11 and run the whole factory reset, i was so happy because I tought it will be easy.. but then after I did the factory reset.. I keep getting this blue screen. if I press ESC I get into this next screen:
F1 System Information
F2 System Diagnostics
F9 Boot Device Options
F10 BIOS Setup
F11 System Recovery
ENTER - Continue Startup.
this is what happen when I click any of this options:
F1 I get into the System Information with no problems, then I click <ESC> to continue and get back to the last screen... then I press F2 and super, I am able to run Memory Test and Hard Drive Check 100% with no problems in any of those, after I am done with my teste I press exit and I am back to the F1,F2, ETC menu... now I want to try F9, F10 or F11. bummer.. in this 3 options I get back to the blue screen described at the beggining of this post. (I already connect a USB with an boot loader, which works perfectly)
so I can't do anything, nothing at all!! crazzines.
So what I did to check why I can't get into the BIOS or at least to boot from my USB... I removed the botton cover of my laptop and removed the hard drive and that's how then I was or I am able to Log into the BIOS, - I did the changes to boot first from the USB and then from the HD and this is how I was able to boot from the USB - BUT If I connect back the Hard drive, I am not able to get into the BIOS or boot from the USB - so basically I am stuck in this blue screen and I can't boot from a USB if I have the HD connected.. I can't use any option.. no BIOS, nothing.. only if again, i disconnect the HD.
This is an:
HP ENVY TS Sleekbook 4
PRODUCT NUMBER D1A99UA#ABA
SYSTEM BOARD ID: 1894
Bios F.25
**** I though that by updating the BIOS I may be able to get help, nothing. What I did is, I removed the HD and then and boot from the USB and with a DOS command propmt I excecuted the Bios Update from F.21 to f.25... but again, when I installed the hard drive back, BUMMER, nothing I can't do nothing but this silly blue screen.
Any idea of what should I do?
Thanks in advance.
This question was solved.
View Solution.

If you can't access BIOS with the hard disk connected, you certainly won't be able to boot to the usb recovery flashdrive. That is indicative of a failed hard disk.
Install a new hard disk and then boot to the recovery flashdrive.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

How to reset data for the company code 1000

Hi Gurus,
I am practicing SAP SD on a sandbox server as am learning it.
But i see that the standard data for the company code 1000 has been altered by previous users and most of the standard setttings have been changed.
Due to this am having a lot of issues while configuring a new company code by copying it from 1000.
Please help me reseting the data for the company code 1000 so that it will be easier for customizing and learning.
Regards,
Harish

Hi Harish,
Follow the step given below
SPRO --> Enterprise Structure --> Definition --> Financial Accounting --> Edit, Copy, Delete, Check Company Code
A pop screen will appear which will give you two options
1) Copy, delete, check company code
2) Edit Company Code Data
Select option one
On next screen --> Click at " Check org. object" or press F8 --> It will ask your company code --> enter your company code 1000 --> Enter
It will check all the related table and if it find any discrepency
then it will show you one pop up screen
Errors in
foreign key dependencies
Do you want the error log
displayed now?
Click at Display now --> correct all the fields which are wrongly maintained.
Hope this helps
Regards,
MT

I am trying to install iTunes in my 64 bit Windows 7 PC. My PC runs normal. But when I try to install Itunes from Apple website, i get message "The Configuration data for this product is Corrupt".

I am trying to install iTunes in my 64 bit Windows 7 PC. My PC runs normal. But when I try to install Itunes from Apple website, I get a message "The Configuration data for this product is Corrupt contact your support personneI" I
am so disgusted,please help!!!

Hey madnest,
Thanks for the question. After reviewing your post, it sounds like you are having difficulty installing iTunes in Windows. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
Issues installing iTunes or QuickTime for Windows
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Java 1.4.2_03 Windows: The configuration data for this product is corrupt.

Trying to install j2SE 1.4.2_03 JRE on a Windows system (exact version needed for a bussiness application) after all previous Java installations have been deleted and all Windows Registry Java related keys have been manually deleted with Regedit.exe.
The EXE installer works properly in other machines but in this one it stops after a few seconds with the following message:
"The configuration data for this product is corrupt. Contact your support personnel".
The problem is related to the Windows install mechanism rather than the Java installer itself and likely caused by the manual Registry deletion.
The error code is 1610: ERROR_BAD_CONFIGURATION.
Reinstalling Windows didn't fix the problem.
Unable to recover the system to a previous state with the System Recovery Tool (Accesories/System Tools).
Other versions of Java installers fail the same way and show the same message.
I don't know how to contact "my support personnel" nor who they are.
I'd appreciate any help about this problem or what Java installers need within the Registry to work or a clue of any kind.

Sorry for the duplicated message. It's my first post and I messed up a little with the right section.
A new downloaded copy of the file or other versions of Java failed to install with the same error message.
I've learned there is a product ID in the registry that must be present for the installer to run. I'm searching for this "mysterious" product ID and how to set the right Windows XP Registry entry for the JSE 1.4.2_03 version.
I'm still not sure this will fix the problem.
Thanks for replying.

Java 1.4.2_03 WindowsXP The configuration data for this product is corrupt.

Trying to install j2SE 1.4.2_03 JRE on a Windows XP system (exact version needed for a bussiness application) after all previous Java installations have been deleted and all Windows Registry Java related keys have been manually deleted with Regedit.exe.
The EXE installer works properly in other machines but in this one it stops after a few seconds with the following message:
"The configuration data for this product is corrupt. Contact your support personnel".
The problem is related to the Windows install mechanism rather than the Java installer itself and likely caused by the manual Registry deletion.
The error code is 1610: ERROR_BAD_CONFIGURATION.
Reinstalling Windows didn't fix the problem.
Unable to recover the system to a previous state with the System Recovery Tool (Accesories/System Tools).
Other versions of Java installers fail the same way and show the same message.
I don't know how to contact "my support personnel" nor who they are.
I'd appreciate any help about this problem or what Java installers need within the Registry to work or a clue of any kind.

Sorry for the duplicated message. It's my first post and I messed up a little with the right section.
A new downloaded copy of the file or other versions of Java failed to install with the same error message.
I've learned there is a product ID in the registry that must be present for the installer to run. I'm searching for this "mysterious" product ID and how to set the right Windows XP Registry entry for the JSE 1.4.2_03 version.
I'm still not sure this will fix the problem.
Thanks for replying.

When i install latest itunes gives an error the configuration data for this product is corrupt.how can i i fix it

hi there
i was trying to install latest itunes it gives error
the configuration data for this product is corrupt contact your personal support
how can i fix it and what is the reason for this error

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Why does it say "The configuration data for this product is corrupt. Contact your support personnel." when trying to install itunes64installer on my b4 bit windows 7 acer pc? Any help would be much appreciated...

Why does it say "The configuration data for this product is corrupt. Contact your support personnel." when trying to install itunes64installer on my b4 bit windows 7 acer pc? Any help would be much appreciated...

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

The license configuration data for adobe no longer usable

What more can I do with: The license configuration data for adobe (Photoshop, Illustrator etc) is no longer usable. I have tried the License recovery download all 3 times...

Without system and version information nobody can help you. and instead of muddling around with teh license recovery tool simply reinstall.
Mylenium

I tried to update itunes to the latest version yet it wont update. Im currently getting a error message,from Window Installer, configuration dat for this product is corru

I'm trying to update itunes but not very successful and im not making much progress. Im currently getting a message on the screen from Window Installer quoting configuration data for this product is corrupt while trying

The path 'C:\Documents and Settings\HP_Administrator\Local Settings\Application Data\Apple\Apple Software Update\iTunes.msi' cannot be found. Verify that you have access to this location and try again, or try to find the installation package 'iTunes.msi' in a folder from which you can install the product iTunes.
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

Bonjour64 error: "The configuration data for this product is corrupt. Contact your support personnel."

Have use WinRAR to pull out only Bonjour64 from iTunes 11.1.5 (and prior releases) to do an install of only Bonjour, as all other iTunes-related software loads fine (have used 11.1.4 and new 11.1.5). I get the error: "The configuration data for this product is corrupt. Contact your support personnel." Have tried everything suggested on net and this forum, including uninstalling everything, cleaning registry, disabling firewall, etc. Not worthwhile to reinstal Windows 7. What do I do?

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page). Here's a screenshot showing the particular links on the page that you should be clicking:
After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
When the dialog appears, choose to save the file.
(2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

"Display PDF in Browser" setting - $500 reward for the solution

The corporate policy requires the "Display PDF in Browser" setting to be unchecked for all applications, this is to open the PDF document in new reader instance but our specific application needs the reader to be opened in the same browser even if the preference "Display PDF in Browser" is unchecked.... The setPreference from javascript (html) doesn't seemed to work... How do i make this work? I am looking for programatic way to set this preference in HTML javasript or Java Applet or ActiveX or any other means. I am currently using JS and Object tag, the only functions that we need at this point are page navigation and getting current page using JS.
Also, I need the links the browser to open in new browser once the PDF is loaded... do I need to reset the preference once it is loaded for the links to open in new browser? How can this be progrmatically achieved without altering the original PDFs?
I realize that this may be difficult and am looking for workarounds or alternate solutions to meet my req. $500 for anyone who could can provide solution.. Please email me [email protected]
thanks,
- Ray

Convince your IT people to allow folks to set their preference to display in browser.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Sun, 13 Nov 2011 14:58:23 -0800
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: "Display PDF in Browser" setting - $500 reward for the solution
Re: "Display PDF in Browser" setting - $500 reward for the solution
created by pdf_disp_issue<http://forums.adobe.com/people/pdf_disp_issue> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4023302#4023302

How to get the date for the first monday of each month

Dear Members,
How to get the date for the first monday of each month.
I have written the following code
SELECT decode (to_char(trunc(sysdate+30 ,'MM'),'DAY'),'MONDAY ',trunc(sysdate+30 ,'MM'),NEXT_DAY(trunc(sysdate+30 ,'MM'), 'MON')) FROM DUAL
But it look bith complex.
Abhishek
Edited by: 9999999 on Mar 8, 2013 4:30 AM

Use IW format - it will make solution NLS independent. And all you need is truncate 7<sup>th</sup> day of each month using IW:
select sysdate current_date,
        trunc(trunc(sysdate,'mm') + 6,'iw') first_monday_the_month
from dual
CURRENT_D FIRST_MON
08-MAR-13 04-MAR-13
SQL> Below is list of first monday of the month for this year:
with t as(
          select add_months(date '2013-1-1',level-1) dt
            from dual
            connect by level <= 12
select dt first_of_the_month,
        trunc(dt + 6,'iw') first_monday_the_month
from t
FIRST_OF_ FIRST_MON
01-JAN-13 07-JAN-13
01-FEB-13 04-FEB-13
01-MAR-13 04-MAR-13
01-APR-13 01-APR-13
01-MAY-13 06-MAY-13
01-JUN-13 03-JUN-13
01-JUL-13 01-JUL-13
01-AUG-13 05-AUG-13
01-SEP-13 02-SEP-13
01-OCT-13 07-OCT-13
01-NOV-13 04-NOV-13
FIRST_OF_ FIRST_MON
01-DEC-13 02-DEC-13
12 rows selected.
SQL> SY.

When trying to install itunes on windows 7 i got a configuration data for this product is corrupt?

It is not allowing me to install, it gives me the error: configuration data for this product is corrupt. How do I install itunes on my windows 7?
Trying to update my ipad....but I first need to install itunes!!

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Clearing date for the payment invoice through APP

Hi All,
I have some payment invoice which falls net due date on sunday so i can't able to run app on sunday(holiday) so i use to run on saturday for getting the discount before the net due date. While paying like this the system is taking clearing date and value date as sunday as per the net due date of the invoice, which is on holiday for the banks instead of what i have given in the payment parameters as saturday.
what can i do for this to get payment parameters date as clearing date for the invoice.
In the payment method for this invoices the payment per due date check box is unchecked in the configuration. If i select this check box is it works for payment parameters date as clearing date.
Please help me on this issue urgent.
Thanks @ Regards
Nandha

Hi Jigar,
Thanks for ther reply,
that all different issues,
My issue is the user run the payment run on saturday with posting date as saturday which the invoice are due on sunday in the clearing invoice they are getting the clearing date as sunday which is holiday for banks.
So I need to get clearing date as saturday for that net due date as sunday invoices why because i giving the posting date as saturday.
Please suggest me what should i do for this issue.
Thanks & Regards
Nandha

Reset SMD-Configuration data for the solution

Similar Messages

Maybe you are looking for