Reset the Previous Import catalog when using auto import

I'm using auto import with a watched folder to add scanned slides to a new catalog. Works fine. My question is about the Previous Import "catalog" that new imports are automatically added to. I had thought that this catalog would be reset after each session (i.e. after closing and restarting LR), but it never resets and still shows every slide that I've automatically imported over the last couple of weeks. Is there any way to clear or reset this?
I'm using LR3.3

Unfortunately, the Previous Import count cannot be reset without deleting the previous import from the catalog. Silly? Yes!
Also, Previous Import only records the number of files imported during the last import (i.e. via import window, auto import or import from catalog), not the total number of images previously imported. So, I'm not sure why you're getting your total shows the sum of all previous imports.

Similar Messages

HT5312 I have a used iMac 21.5 in that i would like to reset the apple id so when I get updates in goes to my id instead of the previous owners id. Which in the case is a relative

I have a used iMac 21.5 in that i would like to reset the apple id so when I get updates in goes to my id instead of the previous owners id. Which in the case is a relative. How can I do this ?

The Mac, it's OS and the iLife apps are still associated with the original owners Apple ID.Normally the original owner needs to follow the process to prepare a Mac for selling or giving it to someone else. They need to call Apple Care and request that their Apple ID be disassociated from the Mac, erase the Mac and install the most recent version of OS X that shipped on the Mac, reinstall the iLife apps and deauthorize the Mac from their iTunes account.
If you have a bill of sale of some sort and can prove the Mac beongs to you, Apple may be able to assist you. Call Apple Care and explain the issue.

Have made some slide show libraries on publisher then saved as jpg however when I sync through itunes to my ipad the previous import is over written. Can anyone offer a solution. Thanks

Have made some slide show libraries on publisher then saved as jpg however when I sync through itunes to my ipad the previous import is over written. Can anyone offer a solution. Thanks

I have tried much of the same - still no joy.
I also reported it as a bug to Apple although the response page said "we can't reply to messages"
For now I have had to turn off auto syncing and keep plugging and unplugging until the device is recognised correctly - about 1 in 10.
In my email to apple I also listed the contents of the xml file that keeps track of the devices that iTunes has seen:
When seen as an ipad:
<dict>
<key>Connected</key>
<date>2010-06-08T21:33:57Z</date>
<key>Device Class</key>
<string>iPad</string>
<key>Family ID</key>
<integer>10006</integer>
<key>Firmware Version</key>
<integer>256</integer>
<key>Firmware Version String</key>
<string>3.2</string>
<key>ID</key>
<string>8F98884620E0F9FF</string>
<key>Serial Number</key>
<string>V5020116Z39</string>
<key>Updater Family ID</key>
<integer>10006</integer>
<key>Use Count</key>
<integer>21</integer>
</dict>
When seen as an iPhone:
<dict>
<key>Connected</key>
<date>2010-06-08T21:39:07Z</date>
<key>Device Class</key>
<string>iPhone</string>
<key>Family ID</key>
<integer>10006</integer>
<key>Firmware Version</key>
<integer>256</integer>
<key>Firmware Version String</key>
<string>3.2</string>
<key>ID</key>
<string>8F98884620E0F9FF</string>
<key>Serial Number</key>
<string>V5020116Z39</string>
<key>Updater Family ID</key>
<integer>10006</integer>
<key>Use Count</key>
<integer>22</integer>
</dict>
You will see from the Use Count that these are adjacent connections, ie plugged in as ipad then as iphone. Apart from the device class, everything else is the same.

Problem importing photos after the new Photos update: When I drag photos from my desktop, why don't they don't replace the previously imported photos in "Last Import".

When I drag photos from my desktop to the new Photos icon, they don't replace the previously imported photos in "Last Import".

After several attempts, I now find that this is working for me. I wasn't able to open the IMPORT folder in Photos until I clicked on "Close" from File Menu. Once I was able to open the IMPORT folder and select the photos for import, the new photos appeared in "Last Import."

Is there a way to create a collection based on the "previous import"?

is there a way to create a collection based on the "previous import"? that would make it easy to mobile sync the last import to my ipad, and do further picking/rejecting while away from my laptop.

well, yes, of course i could do it that way. i guess i wasn't specific enough. is there a way to create a smart collection, with the photos in the "previous import" as members of the smart collection. earlier i mentioned about using this smart collection to mobile sync with my ipad, to do further flagging.
so my intention, use a smart collection to mobile sync with my ipad, and the smart collection to include the photos from my previous import.
i guess another way to ask the question, is there a way to create a smart collection, by using some rule or condition in the smart collection, to automatically include previous import photos.
the documentation says that "previous import" is a collection, even though it shows up in the catalogue side bar section. but i see no way to choose that collection when making a smart collection.
jd

Best practice when using auto complete in view layer

Hello
I have a question regarding best way to store/cash data when using auto complete function in view layer.
I know that there will be a lot of visitors that will use this function and I dont want to kill the application server so I need some advice.
Its about 6000 words that should be searchable .... my first thought was to create a Singleton-bean that stores current items and that I will iterate over but its a lot of "waste" doing that way.
I would be very glad if anyone could advice me how to do this best way if there is any de-facto standard to use when using auto completion in "view layer"
Thanks!
Best Regards/D_S

I dont know what your design is, but here are some ideas:
To me, autocomplete means you have some user specific data that the user entered prevously such as their home address, and some generic data that is not specific to any particular user. I would store all that in a database. For the user specific data I would store their userID along with the data in the database. Then, when populating a JSP page, I would call up just the data specific to that user and the generic data from the database. I would store it as an array of some type in javascript client--side. When the user clicks the autopopulate button, I would have that button call a javascript fuction that reteives the data from the javascript array and populate the various textfields. All this is done client-side so the form does not have to be re-drawn. I question why you have 6000 items. Normally, autopopulate has at most only a few dozens of items. If you still need 6000 items, I suggest adding a textfield to the form to filter what the data he needs down to a manageable amount. Example: rather than get all names from a telephone book, put a textfield on the form that allowfs an end user to enter a letter a to z such as 'b', then only fetch last names from the phone book that begins with 'b'.

Will the indexes be ignored when using IMPDP...TABLE_EXISTS_ACTION=SKIP?

Hi guys,
11gr2
suppose that i have a .dmp file which has tables, indexes, and data,
and i also have a schema A which already contains tables and data, without indexes
is it possible to use IMPDP to import(or say create) all indexes from .dmp to schema A?
the relevant question is, when using IMPDP...TABLE_EXISTS_ACTION=SKIP, if the table already exists, will IMPDP ignores the relevant indexes creation?
thank you!!!

thanks for the reply.
actually, i have imported over 100G data to the new server, but after look into the new server, most of the indexes are missing somehow, i don't want to drop the schemas and re-import, it will cost me a whole day to finish, any suggestions?
many thanks.

Songs from the previous import appears in the import list

When I import CD songs, the songs from the previous import (and the album art) appears in the list. How can I prevent or avoid this?

This is the iPod Classic community forum, perhaps, you are trying to post to this iTunes Community forum with your issue.

Does anyone know how to reset the Keychain login access when booting from disc?

I recently had Lion go bad on my Mac Pro (screen hung up with twirly grey circle). I tried unsuccessfully to repair permissions etc, so I decided to install Snow Leopard onto my other internal drive as this was the latest system I had on a disc; bootup with that and update to Lion.
After installation the machine restarted and asked me for the login user and password. I thought this was odd as usually it would ask to set this up when you first bootup; I can't get past the login. My question is how do I reset the keychain login access when booted m a disc or is there a default I can use?
Regards

I re-installed in the end and the usual load in screen came – all sorted...

Can you replace existing images in Captivate 7 the way you can when using InDesign?

Can you replace existing images in Captivate 7 the way you can when using InDesign? I need to replace some images but wondering if I'll need to reformat, resize, rename for the Advanced Action, etc.

The work flow is a bit more complicated than in InDesign (keeps only a link to the image as you know in the frame). I understand the problem with the advanced/shared action references. This is my work flow, maybe someone else has an easier, shorter one:
Right-click on the image and use 'Find in Library' or use CTRL-ALT-F if it works on your keyboard (doesn't on my AZERTY one)
In the Library use the right-click menu to open the Properties or double-click the name of the image
In that dialog box, choose 'Import' and choose your new image; for some reason you cannot choose from the Library however, which I find really sad because I'm used to import all assets to the Library.
Drawback: if the new image has not the same width/height ratio, it will adapt to the original size of the image, you can use Edit image to repair. You'll keep the name of the image, you don't have to change advanced/shared actions.

The guides all say when using the iCloud photos are shared across all devices. Why can't I see my photos from my iPhone on my iPad when it settings on both devices the iCloud for photos is on?

The guides all say when using the iCloud photos are shared across all devices. Why can't I see my photos from my iPhone on my iPad when it settings on both devices the iCloud for photos is on?

When you enable Photo Stream on your devices, only new photos you take or import to those devices will be automatically added to your Photo Stream. Existing photos won't.

Can we set the dynamic data source when using getReportParameters() ?

Hello!
I have a report where one of its parameters refers to a list of values (LOVs). This list of values is an SQL Query type. When the data source used in the report is defined in the BI Publisher server, I'm able to get the report parameters using the getReportParameters() function in my application. However, if the data source is not defined the function throws an exception, which is understandable.
I decided to dynamically set the data source so that even if the data source used by the report is not defined in the BI Publisher server, it still will be able to get the LOVs for the parameter. I tried setting the JDBCDataSource of the dynamicDataSource for the ReportRequest object that I passed to the getReportParameters() function. Please see the sample code below:
reportRequest.dynamicDataSource = new BIP10.BIPDataSource();
reportRequest.dynamicDataSource.JDBCDataSource = new BIP10.JDBCDataSource();
setReportDataSource(reportRequest.dynamicDataSource.JDBCDataSource, connectstr, jdbc, dc); //function to set the values for JDBCDataSource object
reportParams = webrs.getReportParameters(reportRequest, uid, pwd); //call the getReportParameters
I was expecting this to work as this is what I did to dynamically set the data source before calling the runReport function. So, my question is -- can we set the dynamic data source when using getReportParameters() ? I tried this both in versions 10g and 11g. It does not seem to work on both versions.
Regards,
Stephanie

report_id column of apex_application_page_ir_rpt can help us uniquely identify each saved report.
We can assign this report_id value to a page item and this page item can be put in the Report ID Item text box of the Advanced section of the Report Attributes page of the IR.
This should load the saved report identified by report_id and you can get rid of javascript
Regards,
Vishal
http://obiee-oracledb.blogspot.com
http://www.packtpub.com/oracle-apex-4-2-reporting/book
Kindly mark the reply as helpful/correct if it solves your problem

He "seller" resets the iPad for me to use, do I have to get it re-activated or purchase a contract/service plan if I ONLY ever plan to use the iPad for Wifi Only???

Question to all the pros..I'm looking to purchase an iPad 4g second hand. Once the "seller" resets the iPad for me to use, do I have to get it re-activated or purchase a contract/service plan if I ONLY ever plan to use the iPad for Wifi Only???

No you don't need a service plan to use wifi. Take special precautions to make sure the seller is the owner. Be sure all their information has been removed properly. If it were me I wouldn't give the person the money until the iPad is registered in my name. I've read too many horror stories of people buying iPads they'll never be able to use because someone else's ID was still on it.

How to remove preinstalled files of adobe photoshop from my mac mini so that i can install a new version of the same software.The previous version was removed using the app cleaner software.Could not continue installation bcoz of earlier files

How to remove preinstalled files of adobe photoshop from my mac mini so that i can install a new version of the same software.The previous version was removed using the app cleaner software.Could not continue installation of the new version because of the existance of files from the previous version.plz help

What "app cleaner software" ? I ask because installing Photoshop over a previous version has never been a problem. Perhaps your difficulty stems from another source, eg. "cleaner software" ?
If you look in your hard drive, at the root level there is a Library. In there is a folder called Application Support, and in that you will find a folder called Adobe. Files from your previous version are there.
However, I urge you to call Adobe support to make sure you are not doing anything that would mess up other Adobe applications.
http://www.adobe.com/support/connect/connecthostedsupport.html

Photoshop CS6 crashes all the time and especially when using the type tool... please help!

Photoshop CS6 crashes all the time and especially when using the type tool... please help!

Since I did not have this problem with CS5 or CS4, I can only assume something is not right with Photoshop CS6... below is my video card info:
ATI Radeon HD 4850:
Chipset Model:          ATI Radeon HD 4850
Type:          GPU
Bus:          PCIe
PCIe Lane Width:          x16
VRAM (Total):          512 MB
Vendor:          ATI (0x1002)
Device ID:          0x944a
Revision ID:          0x0000
ROM Revision:          113-B9110C-425
EFI Driver Version:          01.00.383
Displays:
iMac:
Resolution:          2560 x 1440
Pixel Depth:          32-Bit Color (ARGB8888)
Main Display:          Yes
Mirror:          Off
Online:          Yes
Built-In:          Yes
Connection Type:          DisplayPort
Cinema HD:
Resolution:          1920 x 1200
Pixel Depth:          32-Bit Color (ARGB8888)
Display Serial Number:          2A80273WXMN
Mirror:          Off
Online:          Yes
Rotation:          Supported

Reset the Previous Import catalog when using auto import

Similar Messages

Maybe you are looking for