Reset the state of one switch when another switch is pressed in a VI

I have a START/STOP latching button and a PAUSE/RUN latching button. I would like to be able to reset the PAUSE button when the START/STOP button is pressed. Sometimes the user leaves the PAUSE button latched and then presses the START/STOP button. This then activates only part of the VI.

You could do this in eoither of two ways. The most straight-forward is the case where you have a state-machine of some sort handling the button presses. All you would have to do is insert a local variable of the Pause/Run button in the case structure that is executed when the Start/Stop button is set to the "Stop" position. The local variable would allow you to force the switch into whatever state you want.
The other possibility is that you might want to do it in a subvi. In that situation you'd need to pass to the subvi a reference to the Pause/Run button and use the "Value" property to turn it off. The disadvantage of this approach is that according to NI using property nodes to set the value of a control is much slower than writing to it directly with a lo
cal variable.
If you have specific questions feel free to follow-up. Also if you could post the pertinent bits of the code in 6.0 format I could give you very specific recommendations.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Similar Messages

How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

unless i'm missing something, i think you got mixed up, this is easy google for walk throughs
i'm assuming this is the new 3tb tc AC or 'tower' shape, if so, its wifi will run circles around your at&t device
unplug the at&t box for a minute and plug it back in
factory reset your tc - unplug it, hold down reset and keep holding while you plug it back in - only release reset when amber light flashes in 10-20s
connect the tc to your at&t box via eth in the wan port, wait 1 minute, open airport utility look in 'other wifi devices' to setup the tc
create a new wifi network (give it a different name than your at&t one) and put the tc in bridge mode (it may do this automatically for you, but you should double check) under the 'network' tab
login to your at&t router and disable wifi on it
add new clients to the new wifi network, and point your Macs to the time machine for backups

Transfer data in the Ztable from one client to another client in a same ser

Hi all,
How can i transfer or move data in the Ztable from one client to another client in a same server .
Thanks
Ajay

hi,
create a transport request (Workbench type) and add the following line into the transport request:
R3TR TABU name_of_table
save and doubleclick this line and enter the table keys for the required entries (if you need all antries: client and an asterisk will do).
When it is done save again, release the transport and ask basis to import into target client (or you can do on your own in SCC1 transaction)
hope this helps
ec

Passing the values from one pgm to another pgm (Calling pgm has no sel scr)

Hi gurus,
In my requirement i need to pass the values from one program to another program.
I am using SUBMIT statement . But , the program which i am calling has no selection screen.
So how can i pass the values?
Please help me ASAP.
Regards,
Bhanu.R

Export your internal tables or work areas to a memory id in ur program before u use submit.
Then in second pgm you have to import from memory id given above.
example.
EXPORT gs_header FROM gs_header to memory id 'HEADER'.
EXPORT gt_item FROM gt_item to memory id 'ITEM'.
SUBMIT YFIIN_DISHC_MAILREPORT EXPORTING LIST TO MEMORY AND RETURN.
In your second pgm you can write
import gs_header TO gs_header from MEMORY id 'HEADER'.
import gt_item TO gt_item from MEMORY id 'ITEM'.

How can you move the objects from one server to another?

how can you move the objects from one server to another?

Hi,
Collecting objects for Transporting
1. rsa1->transport connection
2. left panel choose 'object type', middle panel choose 'infocube' and 'select objects'
3. then choose your infocube and 'transfer'
4. will go to right panel, choose collection mode 'manual' and grouping only 'necessary objects'
5. after objects collection finished, create request
6. If they are $TMP, then change the package.
7. When you click the Save on the change package, it will prompt for transport. Here you can provide an existing open transport request number, or if you like here itself you can create a new one.
8. You can check the request in SE09 to confirm.
Releasing Transport Request
Lets say you are transporting from BWD to BWQ
Step 1: In BWD go to TCode SE10
Step 2: Find the request and release it (Truck Icon or option can be found by right click on request #)
Note: First release the child request and then the parent request
Steps below are to import transport (generally done by basis )
Step 1: In BWQ go to Tcode STMS
Step 2: Click on Import queue button
Step 3: Double Click on the line which says BWQ (or the system into which transport has to be imported)
Step 4: Click on refresh button
Step 5: High light the trasnport request and import it (using the truck icon)
Transport
http://help.sap.com/saphelp_nw2004s/helpdata/en/b5/1d733b73a8f706e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/224381ad-0701-0010-dcb5-d74236082bff
Hope this helps.
thanks,
JituK

HELP! How do I get rid of the volume noise that plays when I switch from internal speakers to external speakers?

How do I get rid of the volume noise that plays when I switch from internal speakers to external speakers? I'm trying to watch something on my TV through an HDMi cable (& apple adapter) and when I go to switch the sound control in preferences from internal speakers to SONY TV, the annoying "popping" noise occurs on my TV's speakers.

Go to Edit > Preferences > General > Import Settings and check the box for error correction, and then try one of the problem CDs again.

Best Way to port the data from one DB to another DB using Biztalk

Hi,
please suggest best way to move the data from one db to another DB using biztalk.
Currently I am doing like that, for each transaction(getting from different source tables) through receive port, and do some mapping (some custom logic for data mapping), then insert to target normalized tables(multiple tables) and back to update the status
of transaction in source table in sourceDB. It is processing one by one.
How/best we we can do it using bulk transfer and update the status. Since it has more than 10000 transaction per call.
Thanks,
Vinoth

Hi Vinoth,
For SQL Bulk inserts you can always use SQL Bulk Load
adapter.
http://www.biztalkgurus.com/biztalk_server/biztalk_blogs/b/biztalksyn/archive/2005/10/23/processing-a-large-flat-file-message-with-biztalk-and-the-sqlbulkinsert-adapter.aspx
However, even though a SQL Bulk Load adapter can efficiently insert a large amount of data into SQL you are still stuck with the issues of transmitting the
MessageBox database and the memory issues of dealing with really large messages.
I would personally suggest you to use SSIS, as you have mentioned that records have to be processed in specific time of day as opposed to when the
records are available.
Please refer to this link to get more information about SSIS: http://msdn.microsoft.com/en-us/library/ms141026.aspx
If you have any more questions related to SSIS, please ask it in
SSIS
forum and you will get specific support.
Rachit

Cannot move the pages from one document to another

Hi,
I cannot move the pages from one document to another, abobe gets crashed. I am not sure but I think this was happening when I try to copy or move the threaded content. How to resolve this, this is happening in both CS4 and CS5. Can anyone help me?

Thanks for ur reply.
1. Open two documents, for ex doc1 and doc2, doc1 contais 4 pages, doc2 contains 2 pages
2. Using Move Pages from the Pages panel menu in doc1, moving 1st two pages to doc2
Move Pages : 1-2
Destination : After page 1
Move to : doc2
Actually I was not able to copy the textframe which is linked with another, immediately it crashes.

How to mirror the screen from one ipad2 to another ipad2?

How to mirror the screen from one ipad2 to another ipad2?
When writing in f.ex. Pages on one iPad i wish to see it in realtime on the other ipad.
How is that done???

That functionality is not built into the iPad, so you'd need a third-party app of some sort. I'm not aware of any app that allows mirroring from one iPad to another iPad, but perhaps someone else will know of something I've missed.
Regards.

I bought an HD movie. I downloaded the std def version and when I switch to HD, iTunes said I already downloaded it. How do I re-download an HD movie?

I bought an HD movie. I downloaded the std def version and when I switch to HD, iTunes said I already downloaded it. How do I re-download an HD movie?

Audiobooks are a one-time only download from the store. If you still have your old and haven't copied to over to your computer's iTunes library then you can do so by connecting that phone to your computer and doing File > Devices > Transfer Purchases - it should copy over to the Books paer of your iTunes library (Audiobooks if you are using a Mac with OS X Mavericks on it). You can then sync it to your new phone.

How we can get the values from one screen to another screen?

hi guru's.
how we can get the values from one screen to another screen?
we get values where cusor is placed but in my requirement i want to get to field values from one screen to another screen.
regards.
satheesh.

Just think of dynpros as windows into the global memory of your program... so if you want the value of a field on dynpro 1234 to appear on dynpro 2345, then just pop the value into a global variable (i.e. one defined in your top include), and you will be able to see it in your second dynpro (assuming you make the field formats etc the same on both screens!).

How can I pass the photos from one iphone to another?

how can I pass the photos from one iphone to another?

Use the Beaming feature. See the info at the ? In iPhoto for iOS.

I would like to copy all the songs from one Ipod into another. All the songs are into my Itunes account, I tried to drag and drop the songs from the old Ipod to the new one but it doesn't work. Is there a way to do it ?

Hello everybody,
I would like to copy all the songs from one Ipod into another. All the songs are into my Itunes account, I tried to drag and drop the songs from the old Ipod to the new one but it doesn't work. Is there a way to do it ?
I share one Itunes account with other people from my family and one person would like to keep the same songs on the new Ipod as the ones which were on the old one.
Thanks in advance for your answer.
Yan

Hello Chris,
Thanks for your answer. I was hoping for an easier answer. Too bad there is no drag and drop solution, it would have been much easier.
Thanks for answering so fast.
Bye.
Yan

How do I copy the style from one control to another?

I need to programmatically copy the style from one graph to another. I'm currently using the importstyle and export style functions but I'd like to avoid that since: 1) I'm creating >100 of the same graphs in a scrolling window and execution time is a concern, and 2) it makes it harder to redistribute the application, and 3) you shouldn't have to import/export from disk just to copy a graph style.
I noticed the copy constructor was disabled so you can't just create a new one from the original. I suppose I could iterate through all the styles and transfer them from the master graph to all the copies but is there an easier way to do that? If not, is there some sample code for that?
I'm using MStudio 7.0 for C
++.
Thanks,
-Bob

One way that you could do this would be to create a helper method that configures your graph rather than configuring it at design-time, then use that helper method to apply the settings to the new graphs that you create. However, this would only work if you wanted all graphs to be configured exactly the same way - this would not work if the settings of your master graph are changing at run-time and you want the new graphs to be configured with the current settings of the master graph.
Another approach is to query each control for IPersistPropertyBag, create an IPropertyBag, pass the IPropertyBag to the master graph's IPersistPropertyBag:ave, then pass the IPropertyBag to the new graph's IPersistPropertyBag::Load implementation. I'm not aware of any implementations of IPropertyBag that are readily available for use in applications, so the tricky part is creating the IPropertyBag. Below is a very simple implementation of IPropertyBag that should be enough to get the job done for this example. First, add this to your stdafx.h:
#include <atlbase.h>
CComModule _Module;
#include <atlcom.h>
#include <atlcoll.h>
Here's the simple IPropertyBag implementation:
class ATL_NO_VTABLE CSimplePropertyBag :
public CComObjectRootEx<CComSingleThreadModel>,
public IPropertyBag
private:
CAtlMap<CComBSTR, CComVariant> m_propertyMap;
public:
BEGIN_COM_MAP(CSimplePropertyBag)
COM_INTERFACE_ENTRY(IPropertyBag)
END_COM_MAP()
STDMETHODIMP Read(LPCOLESTR pszPropName, VARIANT* pVar, IErrorLog* pErrorLog)
HRESULT hr = E_FAIL;
if ((pszPropName == NULL) || (pVar == NULL))
hr = E_POINTER;
else
if (SUCCEEDED(::VariantClear(pVar)))
CComBSTR key = pszPropName;
CComVariant value;
if (!m_propertyMap.Lookup(key, value))
hr = E_INVALIDARG;
else
if (SUCCEEDED(::VariantCopy(pVar, &value)))
hr = S_OK;
return hr;
STDMETHODIMP Write(LPCOLESTR pszPropName, VARIANT* pVar)
HRESULT hr = E_FAIL;
if ((pszPropName == NULL) || (pVar == NULL))
hr = E_POINTER;
else
m_propertyMap.SetAt(pszPropName, *pVar);
hr = S_OK;
return hr;
Once you have a way to create an implementation of IPropertyBag, you can use IPropertyBag and IPersistPropertyBag to copy the settings from one control to another like this:
void CopyGraphStyle(CNiGraph& source, CNiGraph& target)
LPUNKNOWN pSourceUnknown = source.GetControlUnknown();
LPUNKNOWN pTargetUnknown = target.GetControlUnknown();
if ((pSourceUnknown != NULL) && (pTargetUnknown != NULL))
CComQIPtr<IPersistPropertyBag> pSourcePersist(pSourceUnknown);
CComQIPtr<IPersistPropertyBag> pTargetPersist(pTargetUnknown);
if ((pSourcePersist != NULL) && (pTargetPersist != NULL))
CComObject<CSimplePropertyBag>* pPropertyBag = 0;
CComObject<CSimplePropertyBag>::CreateInstance(&pPropertyBag);
if (pPropertyBag != NULL)
CComQIPtr<IPropertyBag> spPropertyBag(pPropertyBag);
if (spPropertyBag != NULL)
if (SUCCEEDED(pSourcePersist->Save(spPropertyBag, FALSE, TRUE)))
pTargetPersist->Load(spPropertyBag, NULL);
(Note that "CreateInstan ce" above should be CreateInstance - a space gets added for some unknown reason after I click Submit.)
Then you can use this CopyGraphStyle method to copy the settings of the master graph to the new graph. Hope this helps.
- Elton

Need help for focusing the cursor from one textbox to another textbox

hii all,
I have a problem in java script.
Note:The textboxes are generated dynamically.it is not having fixed length.(the number of textboxes generated may be 3,2,4....etc.it is not fixed.
To move cursor from one textbox to another text box ,I have taken the length of the textboxes of the first column.I used onkeyDown event .
in the function ,first i checked the condition like
for(i=0;i<form1.box.length;i++) //box is the name of the textboxes
if(event.keyCode==13)
form1.box[i+1].focus();
return false;
by using this the cursor is moving from first text box to second textbox and stops.
if i use event.returnValue=false; instead of return false ,then the cursor automatically going to the laxt textbox of the column.
my problem is how i can focus the cursor from one textbox to another textbox one after the other till the end.
if any one has solution please help me.
also if we can do in another way also,please help me.
thanx.>

thanx .u helped me so much.
i have to check another condition. see the code below
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML>
<HEAD>
<TITLE> New Document </TITLE>
<META NAME="Generator" CONTENT="EditPlus">
<META NAME="Author" CONTENT="">
<META NAME="Keywords" CONTENT="">
<META NAME="Description" CONTENT="">
</HEAD>
<SCRIPT language="Javascript">
function fnTest(str) {
if(event.keyCode==13) {
if(str == 4) {
formHeader.box[0].focus();
else {
formHeader.box[parseInt(str)+1].focus();
return false;
</SCRIPT>
<BODY>
<FORM name="formHeader">
<CENTER>
<INPUT TYPE="TEXT" name="box" value="" onKeyDown="javascript:fnTest('0');">
<br>
<INPUT TYPE="TEXT" name="box" value="" onKeyDown="javascript:fnTest('1');">
<br>
<INPUT TYPE="TEXT" name="box" value="0" disabled="false" onKeyDown="javascript:fnTest('2');">
<br>
<INPUT TYPE="TEXT" name="box" value="" onKeyDown="javascript:fnTest('3');">
<br>
<INPUT TYPE="TEXT" name="box" value="" onKeyDown="javascript:fnTest('4');">
</CENTER>
</FORM>
</BODY>
</HTML>
suppose if some of the fields are disabled,then the focus must skip to the next one.i have written disabled for box2.if the cursor focuses in box1,then the cursor should move to box3 escaping box2.
if u know plz tell me.

Reset the state of one switch when another switch is pressed in a VI

Similar Messages

Maybe you are looking for